Menu Search tutorials, courses and ebooks...

Login

Home

Coding
HTML Ground CSS Javascript SQL Python Java C C++

Jobs
Synchronous Generator – Construction and Working
Whiteboard
Principle
Electronics & Electrical Electron Digital Electronics

Tools

3RT20461AK60 Stock
Electronic Component Data
Electronic Component Search Engine
findchips.com

Ďalšie Informácie

A synchronous generator is a synchronous machine which converts mechanical power into AC

electric power through the process of electromagnetic induction.

Synchronous generators are also referred to as alternators or AC generators. The term

"alternator" is used since it produces AC power. It is called synchronous generator because it
must be driven at synchronous speed to produce AC power of the desired frequency.

A synchronous generator can be either single-phase or poly-phase (generally 3phase).

Construction of Synchronous Generator or Alternator

As alternator consists of two main parts viz.

Stator – The stator is the stationary part of the alternator. It carries the armature winding
in which the voltage is generated. The output of the alternator is taken form the stator.

Rotor – The rotor is the rotating part of the alternator. The rotor produces the main field
flux.
 ADVERTISEMENT

ADVERTISEMENT

Stator Construction of Alternator

The stator of the alternator includes several parts, viz. the frame, stator core, stator or armature
windings, and cooling arrangement.

The stator frame may be made up of cast iron for small-size machines and of welded
steel for large-size machines.

The stator core is assembled with high-grade silicon content steel laminations. These
silicon steel laminations reduce the hysteresis and eddy-current losses in the stator
core.

The slots are cut on the inner periphery of the stator core. A 3-phase armature winding is
put in these slots.

The armature winding of the alternator is star connected. The winding of each phase is
distributed over several slots. When current flows through the distributed armature
winding, it produces an essential sinusoidal space distribution of EMF.
 ADVERTISEMENT

ADVERTISEMENT

Rotor Construction of Alternator

The rotor of the alternator carries the field winding which is supplied with direct current through
two slip rings by a separate DC source (also called exciter). The exciter is generally a small DC
shunt generator mounted on the shaft of the alternator.

For the alternator, there are two types of rotor constructions are used viz. the salient-pole type
and the cylindrical rotor type.

Salient Pole Rotor

The term salient means projecting. Hence, a salient pole rotor consists of poles projecting out
from the surface of the rotor core. This whole arrangement is fixed to the shaft of the alternator
as shown in the figure. The individual field pole windings are connected in series such that when
the field winding is energised by the DC exciter, the adjacent poles have opposite polarities.

The salient pole type rotor is used in the low and medium speed (from 120 to 400 RPM)
alternators such as those driven by the diesel engines or water turbines because of the following
reasons −

The construction of salient pole type rotor cannot be made strong enough to withstand
the mechanical stresses to which they may be subjected at higher speed.

If the salient field pole type rotor is driven at high speed, then it would cause windage
loss and would tend to produce noise.

Low speed rotors of the alternators possess a large diameter to provide the necessary space for
the poles. As a result, the salient pole type rotors have large diameter and short axial length.

ADVERTISEMENT

ADVERTISEMENT

Cylindrical Rotor
The cylindrical rotors are made from solid forgings of high-grade nickel-chrome-molybdenum
steel.

The construction of the cylindrical rotor is such that there are no-physical poles to be
seen as in the salient pole rotor.

In about two-third of the outer periphery of the cylindrical rotor, slots are cut at regular
intervals and parallel to the rotor shaft.

The field windings are placed in these slots and is excited by DC supply. The field
winding is of distributed type.

The unslotted portion of the rotor forms the pole faces.

It is clear from the figure of the cylindrical rotor that the poles formed are non-salient,
i.e., they do not project out from the rotor surface.
The cylindrical type rotor construction is used in the high-speed (1500 to 3000 RPM) alternators
such as those driven by steam turbines because of the following reasons −

The cylindrical type rotor construction provides a greater mechanical strength and
permits more accurate dynamic balancing.

It gives noiseless operation at high speeds because of the uniform air gap.

The flux distribution around the periphery of the rotor is nearly a sine wave and hence a
better EMF waveform is obtained.

A cylindrical rotor alternator has a comparatively small diameter and long axial length. The
cylindrical rotor alternators are called turbo-alternators or turbo-generators. The alternator with
cylindrical rotor have always horizontal configuration installation.

ADVERTISEMENT

ADVERTISEMENT

Working Principle and Operation of Alternator

An alternator or synchronous generator works on the principle of electromagnetic induction, i.e.,
when the flux linking a conductor changes, an EMF is induced in the conductor. When the
armature winding of alternator subjected to the rotating magnetic field, the voltage will be
generated in the armature winding.

When the rotor field winding of the alternator is energised from the DC exciter, the alternate N
and S poles are developed on the rotor. When the rotor is rotated in the anticlockwise direction by
a prime mover, the armature conductors placed on the stator are cut by the magnetic field of the
rotor poles. As a result, the EMF is induced in the armature conductors due to electromagnetic
induction. This induced EMF is alternating one because the N and S poles of the rotor pass the
armature conductors alternatively.

The direction of the generated EMF can be determined by the Fleming’s right rule and the
frequency of it is given by,

Ns P
f =
120

Where,

Ns is the synchronous speed in RP

P is the number of rotor poles.

The magnitude of the generated voltage depends upon the speed of rotation of the rotor and the
DC field excitation current. For the balanced condition, the generated voltage in each phase of
the winding is the same but differ in phase by 120° electrical.

Related Articles
Electric Generator: Construction and Working Principle

Three-Phase Synchronous Motor – Construction and Working Principle

Electrodynamometer Wattmeter – Construction and Working Principle

Construction and Working Principle of DC Generators

Construction and Working Principle of DC Motors

Single Phase Transformer – Construction and Working Principle

Neon Lamp – Principle, Construction, Working, and Applications