Internship

Network
Administration

100 Days Challenge

What We Give:

CCNA Training

Job Preparation Note

Datacenter Network Design Project

Datacenter Network Design Project Report

3 International vendor Certificates Guideline

What we want from you:

Group work

Help each Other

Report Submission

Assignment Preparation

Complete Int. Course content

Internship Training Plan

Module Session Description

Discussion Orientation
Module 1 Discussion Network Administration Professional Career
(Introduction) Discussion Career Plan, Internship Plan, Study Plan
Discussion CCNA 200-301 Introduction
Discussion Introduction to Computer Network
Module 2 Discussion Computer Network Architecture and Topology
(Network
Architecture) Lab 1.1 Packet Tracer Installation
Lab 1.2 Familiarization of Cisco Packet Tracer and Device Icon
Discussion Layer based Network Devices
Module 3 Discussion OSI Layers and Protocols
(Network Device) Lab 2 Familiarization of Networking Device
Lab 3 Device Assessment according to Project Requirement
Discussion Network transmission Media
Module 4 Discussion Transmission method
(Network
Cabling) Lab 4.1 RJ 45 Connector making procedure
Lab 4.2 Cable Requirement Analysis
Discussion All About IP Addressing
Module 5 Discussion MAC Addressing
(IP Addressing) Lab 5.1 IP Address Anatomy
Lab 5.2 Assign IP to a Host Requirement, Calculation, Verification
Discussion Host to Host Communication
Module 6 Discussion Host to Host via Switch and Router
(PAN) Lab 6.1 Private Area Network Buildup and Configuration
Lab 6.2 Packet Flow monitoring and Observation
Discussion Type of Switch Port Description
Module 7 Discussion LAN Communication and Inter VLAN Communication
(LAN VLAN) Lab 7.1 Inter and Intra VLAN Communication verification
Lab 7.1 Local Area Network Buildup and Configuration
Discussion Switch Protocols and Functions
Module 8 Discussion How Switch manage Network operations
(Switch ops) Lab 8 STP Verification
Lab 9 EtherChannel Configuration and Verification
 Module Session Description
Module 9 Discussion Subnetting Method
(Subnetting)
Discussion Easy Way to Find Subnet
Lab 10.1 Small office/ Small Network subnet calculation & IP Planning
Lab 10.2 Small office/ Small Network Project
Discussion Routing Fundamentals Introduction
Module 10 Discussion Static Routes, Host Route and Default Routing
(Routing
Fundamental) Lab 11 Static Route Configuration and Verification
Lab 12 Default Route and Default Routing Configuration
Discussion Dynamic Routing Protocols Introduction
Module 11 Discussion RIP Routing Protocols overview
(RIP Routing) Lab 13 RIP Routing Configuration
Lab 14 Packet Reachability test and verification
Discussion OSPF Introduction
Module 12 Discussion OSPF Characteristics
(OSPF Routing) Lab 15 OSPF Basic Configuration
Lab 16 Packet Reachability test using OSPF
Discussion Introduction to VLSM
Module 13 Discussion VLSM Calculation Procedure
(MAN Design) Lab 17 ISP/Large office Network Setup and Verification
Lab 18 Metropolitan Area Network Design, Build up and Configuration
Discussion Introduction to Network Redundancy
Module 14 Discussion Why need Network Redundancy
(Net
Redundancy) Lab 19 Network Redundant link Configuration
Lab 20 Troubleshoot Network Redundancy Effective ness
Discussion Access Control Lists (ACLs)
Module 15 Discussion Network Address Translation (NAT) Overview
(IP Control) Lab 21 ACL Configuration Only IT Department Can use Internet.
Lab 22 NAT Configuration and Verification
Discussion Describe the capabilities and functions of NTP/FTP in the network
Module 16 Discussion Configure and verify DHCP Server
(IP Service) Discussion Configure and verify DNS within the network
Lab 23 Configure IP Services: DHCP, DNS, NTP, FTP
 Module Session Description

Discussion Introduction to key security concepts

Module 17 Discussion Fundamental security Control
(Network
Security) Lab 24 Configure Security parameters on network devices
Lab 25 Configure network devices for remote access using SSH/Telnet
Discussion Network Security software and Hardware
Module 18 Discussion Fundamental Network Defense
(Network
Security) Discussion Automation impacts network management
Lab 26 LAB: Implement backup procedure for Network Security

Lab 27 Mega Project Phase 1: Planning

Module 19 Lab 28 Mega Project Phase 2: Execute

Final Project Lab 29 Mega Project Phase 3: Verification
Lab 30 Project Report and Closing
Lab ## Network Scanning and reconnaissance

Module 20 Lab ## Finding Network Weakness

(Hacking) Lab ## Attack on Week machine
Lab ## Try to hack the machine

Challenge Chase Your Conquer Your

Yourself * Dream * Goals *
Internship: Hands on Practical Plan
Session Description
Lab 1.1 Packet Tracer Installation
Lab 1.2 Familiarization of Cisco Packet Tracer and Device Icon
Lab 2 Familiarization of Networking Device
Lab 3 Device Assessment according to Project Requirement
Lab 4.1 RJ 45 Connector making procedure
Lab 4.2 Cable Requirement Calculation
Lab 5.1 IP Address Anatomy
Lab 5.2 Assign IP to a Host Requirement, Calculation, Verification
Lab 6.1 Private Area Network Buildup and Configuration
Lab 6.2 Packet Flow monitoring and Observation
Lab 7.1 Inter and Intra VLAN Communication verification
Lab 7.1 Local Area Network Buildup and Configuration
Lab 8 STP Verification
Lab 9 EtherChannel Configuration and Verification
Lab 10.1 Small office/ Small Network subnet calculation & IP Planning
Lab 10.2 Small office/ Small Network Project
Lab 11 Static Route Configuration and Verification
Lab 12 Default Route and Default Routing Configuration
Lab 13 RIP Routing Configuration
Lab 14 RIP Routing Explore Configuration
Lab 15 OSPF Basic Configuration
Lab 16 Packet Reachability test using OSPF
Lab 17 ISP Network Setup/Large office Network Verification
Lab 18 Metropolitan Area Network Design, Build up and Configuration
Lab 19 Network Redundant link Configuration
Lab 20 Troubleshoot Network Redundancy Effective ness
 Session Description
Lab 21 ACL Configuration Only IT Department Can use Internet.
Lab 22 NAT Configuration and Verification
Lab 23 Configure Security parameters on network devices
Lab 24 Configure network devices for remote access using SSH/Telnet
Lab 25 Configure IP Services: DHCP, DNS, NTP, FTP
Lab 26 Mega Project Planning
Lab 27 Mega Project Implementation Phase 1
Lab 28 Mega Project Implementation Phase 2
Lab 29 Mega Project Implementation Phase 3
Lab 30 Project Report
Lab ## Network Scanning and reconnaissance
Lab ## Finding Network Weakness
Lab ## Attack on Week machine
Lab ## Try to hack the machine

Note: For our upcoming lab sessions, we will be utilizing software tools such as Packet Tracer and
VMware to enhance our learning experience.

Challenge Chase Your Conquer Your

Yourself * Dream * Goals *
Mega Project: Tier-3 Data Center Implementation and Fault Tolerance Analysis

Project Objective: Experiencing How Network industries complete a network project.

 Initiation Phase:

• Objective: Define Project Scope and Purpose

 Planning Phase:

• Objective: Develop Project Plan

 Execution Phase:

• Objective: Implement Project Plan

 Monitoring and Testing Phase:

• Objective: Track Project Performance

 Closure Phase:

• Objective: Document Lessons Learned

Weekly Training Schedule

Schedule Session Type Description

Tuesday - Instructor-led
Schedule 1 Training • Theory Discussion
• Lab Implementation

Saturday- Instructor-led
Schedule 2 Training • Theory Discussion
• Lab Implementation
Any day Group members can select)
Group • Group Discussion
Schedule 3
Activity • Assignment completion
• Report Writing

Note: All session will be scheduled after 9.00pm(online). Schedule can be changed for any emergency.

Certificate

• Participant certification
• 3 Int. Vendor Certification
Google, Cisco etc.