File and Data Structures Lab Manual 303406

FILE AND DATA STRUCTURES

(303406)

LAB MANUAL

B.C.A II YEAR – IV SEM

(2020-2021)

Vidya Vihar Institute Of Technology

File and Data Structures Lab Manual 303406

GENERAL LABORATORY INSTRUCTIONS

1. Students are advised to come to the laboratory at least 5 minutes before (to the starting time), those
who come after 5 minutes will not be allowed into the lab.
2. Plan your task properly much before to the commencement, come prepared to the lab with the synopsis
/ program / experiment details.
3. Student should enter into the laboratory with:
a. Laboratory observation notes with all the details (Problem statement, Aim, Algorithm,
Procedure, Program, Expected Output, etc.,) filled in for the lab session.
b. Laboratory Record updated up to the last session experiments and other utensils (if any) needed
in the lab.
c. Proper Dress code and Identity card.
4. Sign in the laboratory login register, write the TIME-IN, and occupy the computer system allotted to
you by the faculty.
5. Execute your task in the laboratory, and record the results / output in the lab Observation note book,
and get certified by the concerned faculty.
6. All the students should be polite and cooperative with the laboratory staff, must maintain the
discipline and decency in the laboratory.
7. Computer labs are established with sophisticated and high end branded systems, which should be
utilized properly.
8. Students / Faculty must keep their mobile phones in SWITCHED OFF mode during the lab sessions.
Misuse of the equipment, misbehaviors with the staff and systems etc., will attract severe punishment.
9. Students must take the permission of the faculty in case of any urgency to go out; if anybody found
loitering outside the lab / class without permission during working hours will be treated seriously and
punished appropriately.
10. Students should LOG OFF/ SHUT DOWN the computer system before he/she leaves the lab after
completing the task (experiment) in all aspects. He/she must ensure the system / seat is kept properly.

Head of the Department Principal

File and Data Structures Lab Manual 303406

DATA STRUCTURES Lab Manual

List of programs

S.No Name of the program Page no Date Faculty Sign

1. Write a program that uses functions to
perform the
following operations on singly linked list i)
Creation
ii) Insertion iii) Deletion iv) Traversal.
2. Write a program that uses functions to
perform the following
operations on doubly linked list i) Creation
ii) Insertion iii)
Deletion iv) Traversal.
3. Write a program that uses functions to
perform the following
operations on circular linked list i) Creation
ii) Insertion iii)
Deletion iv) Traversal.
4. Write a program that implement stack (its
operations) using
i) Arrays ii) Linked list(Pointers).
5. Write a program that implement Queue (its
operations) using
i) Arrays ii) Linked list(Pointers)
6. Write a program that implement Circular
Queue using Arrays

7. Write a program that implements the

following sorting
i) Bubble sort ii) Insertion sort iii)Quick
sort.
8. Write a program to implement the Binary
tree traversal
9. Write a program to convert an expression
from Infix to Postfix
10. Write a program to implements Binary
Search Algorithm.
File and Data Structures Lab Manual 303406

Week 1:

Aim: Write a program that uses functions to perform the following operations on singly linked list i)
Creation ii) Insertion iii) Deletion iv) Traversal.
Source Code:

#include<stdio.h>
#include<conio.h>
#include<stdlib.h>

void insertAtBeginning(int);
void insertAtEnd(int);
void insertBetween(int,int,int);
void display();
void removeBeginning();
void removeEnd();
void removeSpecific(int);

struct Node
{
int data;
struct Node *next;
}*head = NULL;

void main()
{
int choice,value,choice1,loc1,loc2;
clrscr();
while(1){
mainMenu: printf("\n\n****** MENU ******\n1. Insert\n2. Display\n3. Delete\n4. Exit\nEnter your choice:
");
scanf("%d",&choice);
switch(choice)
{
case 1: printf("Enter the value to be insert: ");
scanf("%d",&value);
while(1){
printf("Where you want to insert: \n1. At Beginning\n2. At End\n3. Between\nEnter your
choice: ");
scanf("%d",&choice1);
switch(choice1)
{
case 1: insertAtBeginning(value);
break;
case 2: insertAtEnd(value);
break;
case 3: printf("Enter the two values where you wanto insert: ");
scanf("%d%d",&loc1,&loc2);
insertBetween(value,loc1,loc2);
break;
default: printf("\nWrong Input!! Try again!!!\n\n");
goto mainMenu;
}
File and Data Structures Lab Manual 303406

goto subMenuEnd;
}
subMenuEnd:
break;
case 2: display();
break;
case 3: printf("How do you want to Delete: \n1. From Beginning\n2. From End\n3. Spesific\nEnter your
choice: ");
scanf("%d",&choice1);
switch(choice1)
{
case 1: removeBeginning();
break;
case 2: removeEnd();
break;
case 3: printf("Enter the value which you wanto delete: ");
scanf("%d",&loc2);
removeSpecific(loc2);
break;
default: printf("\nWrong Input!! Try again!!!\n\n");
goto mainMenu;
}
break;
case 4: exit(0);
default: printf("\nWrong input!!! Try again!!\n\n");
}
}
}

void insertAtBeginning(int value)

{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode->data = value;
if(head == NULL)
{
newNode->next = NULL;
head = newNode;
}
else
{
newNode->next = head;
head = newNode;
}
printf("\nOne node inserted!!!\n");
}
void insertAtEnd(int value)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode->data = value;
newNode->next = NULL;
if(head == NULL)
head = newNode;
else
{
struct Node *temp = head;
while(temp->next != NULL)
temp = temp->next;
temp->next = newNode;
File and Data Structures Lab Manual 303406

}
printf("\nOne node inserted!!!\n");
}
void insertBetween(int value, int loc1, int loc2)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode->data = value;
if(head == NULL)
{
newNode->next = NULL;
head = newNode;
}
else
{
struct Node *temp = head;
while(temp->data != loc1 && temp->data != loc2)
temp = temp->next;
newNode->next = temp->next;
temp->next = newNode;
}
printf("\nOne node inserted!!!\n");
}

void removeBeginning()
{
if(head == NULL)
printf("\n\nList is Empty!!!");
else
{
struct Node *temp = head;
if(head->next == NULL)
{
head = NULL;
free(temp);
}
else
{
head = temp->next;
free(temp);
printf("\nOne node deleted!!!\n\n");
}
}
}
void removeEnd()
{
if(head == NULL)
{
printf("\nList is Empty!!!\n");
}
else
{
struct Node *temp1 = head,*temp2;
if(head->next == NULL)
head = NULL;
else
{
while(temp1->next != NULL)
{
temp2 = temp1;
File and Data Structures Lab Manual 303406

temp1 = temp1->next;
}
temp2->next = NULL;
}
free(temp1);
printf("\nOne node deleted!!!\n\n");
}
}
void removeSpecific(int delValue)
{
struct Node *temp1 = head, *temp2;
while(temp1->data != delValue)
{
if(temp1 -> next == NULL){
printf("\nGiven node not found in the list!!!");
goto functionEnd;
}
temp2 = temp1;
temp1 = temp1 -> next;
}
temp2 -> next = temp1 -> next;
free(temp1);
printf("\nOne node deleted!!!\n\n");
functionEnd:
}
void display()
{
if(head == NULL)
{
printf("\nList is Empty\n");
}
else
{
struct Node *temp = head;
printf("\n\nList elements are - \n");
while(temp->next != NULL)
{
printf("%d --->",temp->data);
temp = temp->next;
}
printf("%d --->NULL",temp->data);
}
}

Output
File and Data Structures Lab Manual 303406

Week 2:

Aim: Write a program that uses functions to perform the following operations on doubly linked list i)
Creation ii) Insertion iii) Deletion iv) Traversal.

Source Code:

#include<stdio.h>
#include<conio.h>

void insertAtBeginning(int);
void insertAtEnd(int);
void insertAtAfter(int,int);
void deleteBeginning();
void deleteEnd();
void deleteSpecific(int);
void display();

struct Node
{
int data;
struct Node *previous, *next;
}*head = NULL;

void main()
{
int choice1, choice2, value, location;
clrscr();
while(1)
{
printf("\n*********** MENU *************\n");
printf("1. Insert\n2. Delete\n3. Display\n4. Exit\nEnter your choice: ");
scanf("%d",&choice1);
switch()
{
case 1: printf("Enter the value to be inserted: ");
scanf("%d",&value);
while(1)
{
printf("\nSelect from the following Inserting options\n");
printf("1. At Beginning\n2. At End\n3. After a Node\n4. Cancel\nEnter your choice: ");
scanf("%d",&choice2);
switch(choice2)
{
case 1: insertAtBeginning(value);
break;
case 2: insertAtEnd(value);
break;
case 3: printf("Enter the location after which you want to insert: ");
scanf("%d",&location);
insertAfter(value,location);
break;
case 4: goto EndSwitch;
File and Data Structures Lab Manual 303406

default: printf("\nPlease select correct Inserting option!!!\n");

}
}
case 2: while(1)
{
printf("\nSelect from the following Deleting options\n");
printf("1. At Beginning\n2. At End\n3. Specific Node\n4. Cancel\nEnter your choice: ");
scanf("%d",&choice2);
switch(choice2)
{
case 1: deleteBeginning();
break;
case 2: deleteEnd();
break;
case 3: printf("Enter the Node value to be deleted: ");
scanf("%d",&location);
deleteSpecic(location);
break;
case 4: goto EndSwitch;
default: printf("\nPlease select correct Deleting option!!!\n");
}
}
EndSwitch: break;
case 3: display();
break;
case 4: exit(0);
default: printf("\nPlease select correct option!!!");
}
}
}

void insertAtBeginning(int value)

{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode -> data = value;
newNode -> previous = NULL;
if(head == NULL)
{
newNode -> next = NULL;
head = newNode;
}
else
{
newNode -> next = head;
head = newNode;
}
printf("\nInsertion success!!!");
}
void insertAtEnd(int value)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode -> data = value;
newNode -> next = NULL;
if(head == NULL)
{
newNode -> previous = NULL;
head = newNode;
}
File and Data Structures Lab Manual 303406

else
{
struct Node *temp = head;
while(temp -> next != NULL)
temp = temp -> next;
temp -> next = newNode;
newNode -> previous = temp;
}
printf("\nInsertion success!!!");
}
void insertAfter(int value, int location)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode -> data = value;
if(head == NULL)
{
newNode -> previous = newNode -> next = NULL;
head = newNode;
}
else
{
struct Node *temp1 = head, temp2;
while(temp1 -> data != location)
{
if(temp1 -> next == NULL)
{
printf("Given node is not found in the list!!!");
goto EndFunction;
}
else
{
temp1 = temp1 -> next;
}
}
temp2 = temp1 -> next;
temp1 -> next = newNode;
newNode -> previous = temp1;
newNode -> next = temp2;
temp2 -> previous = newNode;
printf("\nInsertion success!!!");
}
EndFunction:
}
void deleteBeginning()
{
if(head == NULL)
printf("List is Empty!!! Deletion not possible!!!");
else
{
struct Node *temp = head;
if(temp -> previous == temp -> next)
{
head = NULL;
free(temp);
}
else{
head = temp -> next;
head -> previous = NULL;
free(temp);
File and Data Structures Lab Manual 303406

}
printf("\nDeletion success!!!");
}
}
void deleteEnd()
{
if(head == NULL)
printf("List is Empty!!! Deletion not possible!!!");
else
{
struct Node *temp = head;
if(temp -> previous == temp -> next)
{
head = NULL;
free(temp);
}
else{
while(temp -> next != NULL)
temp = temp -> next;
temp -> previous -> next = NULL;
free(temp);
}
printf("\nDeletion success!!!");
}
}
void deleteSpecific(int delValue)
{
if(head == NULL)
printf("List is Empty!!! Deletion not possible!!!");
else
{
struct Node *temp = head;
while(temp -> data != delValue)
{
if(temp -> next == NULL)
{
printf("\nGiven node is not found in the list!!!");
goto FuctionEnd;
}
else
{
temp = temp -> next;
}
}
if(temp == head)
{
head = NULL;
free(temp);
}
else
{
temp -> previous -> next = temp -> next;
free(temp);
}
printf("\nDeletion success!!!");
}
FuctionEnd:
}
void display()
{
File and Data Structures Lab Manual 303406

if(head == NULL)
printf("\nList is Empty!!!");
else
{
struct Node *temp = head;
printf("\nList elements are: \n");
printf("NULL <--- ");
while(temp -> next != NULL)
{
printf("%d <===> ",temp -> data);
}
printf("%d ---> NULL", temp -> data);
}
}

Output
File and Data Structures Lab Manual 303406

Week 3:

Aim: Write a program that uses functions to perform the following operations on circular linked list i)
Creation ii) Insertion iii) Deletion iv) Traversal.

Source Code:

#include<stdio.h>
#include<conio.h>

void insertAtBeginning(int);
void insertAtEnd(int);
void insertAtAfter(int,int);
void deleteBeginning();
void deleteEnd();
void deleteSpecific(int);
void display();

struct Node
{
int data;
struct Node *next;
}*head = NULL;

void main()
{
int choice1, choice2, value, location;
clrscr();
while(1)
{
printf("\n*********** MENU *************\n");
printf("1. Insert\n2. Delete\n3. Display\n4. Exit\nEnter your choice: ");
scanf("%d",&choice1);
switch()
{
case 1: printf("Enter the value to be inserted: ");
scanf("%d",&value);
while(1)
{
printf("\nSelect from the following Inserting options\n");
printf("1. At Beginning\n2. At End\n3. After a Node\n4. Cancel\nEnter your choice: ");
scanf("%d",&choice2);
switch(choice2)
{
case 1: insertAtBeginning(value);
break;
case 2: insertAtEnd(value);
break;
case 3: printf("Enter the location after which you want to insert: ");
scanf("%d",&location);
insertAfter(value,location);
break;
case 4: goto EndSwitch;
File and Data Structures Lab Manual 303406

default: printf("\nPlease select correct Inserting option!!!\n");

}
}
case 2: while(1)
{
printf("\nSelect from the following Deleting options\n");
printf("1. At Beginning\n2. At End\n3. Specific Node\n4. Cancel\nEnter your choice: ");
scanf("%d",&choice2);
switch(choice2)
{
case 1: deleteBeginning();
break;
case 2: deleteEnd();
break;
case 3: printf("Enter the Node value to be deleted: ");
scanf("%d",&location);
deleteSpecic(location);
break;
case 4: goto EndSwitch;
default: printf("\nPlease select correct Deleting option!!!\n");
}
}
EndSwitch: break;
case 3: display();
break;
case 4: exit(0);
default: printf("\nPlease select correct option!!!");
}
}
}

void insertAtBeginning(int value)

{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode -> data = value;
if(head == NULL)
{
head = newNode;
newNode -> next = head;
}
else
{
struct Node *temp = head;
while(temp -> next != head)
temp = temp -> next;
newNode -> next = head;
head = newNode;
temp -> next = head;
}
printf("\nInsertion success!!!");
}
void insertAtEnd(int value)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode -> data = value;
if(head == NULL)
{
head = newNode;
File and Data Structures Lab Manual 303406

newNode -> next = head;

}
else
{
struct Node *temp = head;
while(temp -> next != head)
temp = temp -> next;
temp -> next = newNode;
newNode -> next = head;
}
printf("\nInsertion success!!!");
}
void insertAfter(int value, int location)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode -> data = value;
if(head == NULL)
{
head = newNode;
newNode -> next = head;
}
else
{
struct Node *temp = head;
while(temp -> data != location)
{
if(temp -> next == head)
{
printf("Given node is not found in the list!!!");
goto EndFunction;
}
else
{
temp = temp -> next;
}
}
newNode -> next = temp -> next;
temp -> next = newNode;
printf("\nInsertion success!!!");
}
EndFunction:
}
void deleteBeginning()
{
if(head == NULL)
printf("List is Empty!!! Deletion not possible!!!");
else
{
struct Node *temp = head;
if(temp -> next == head)
{
head = NULL;
free(temp);
}
else{
head = head -> next;
free(temp);
}
printf("\nDeletion success!!!");
File and Data Structures Lab Manual 303406

}
}
void deleteEnd()
{
if(head == NULL)
printf("List is Empty!!! Deletion not possible!!!");
else
{
struct Node *temp1 = head, temp2;
if(temp1 -> next == head)
{
head = NULL;
free(temp1);
}
else{
while(temp1 -> next != head){
temp2 = temp1;
temp1 = temp1 -> next;
}
temp2 -> next = head;
free(temp1);
}
printf("\nDeletion success!!!");
}
}
void deleteSpecific(int delValue)
{
if(head == NULL)
printf("List is Empty!!! Deletion not possible!!!");
else
{
struct Node *temp1 = head, temp2;
while(temp1 -> data != delValue)
{
if(temp1 -> next == head)
{
printf("\nGiven node is not found in the list!!!");
goto FuctionEnd;
}
else
{
temp2 = temp1;
temp1 = temp1 -> next;
}
}
if(temp1 -> next == head){
head = NULL;
free(temp1);
}
else{
if(temp1 == head)
{
temp2 = head;
while(temp2 -> next != head)
temp2 = temp2 -> next;
head = head -> next;
temp2 -> next = head;
free(temp1);
}
else
File and Data Structures Lab Manual 303406

{
if(temp1 -> next == head)
{
temp2 -> next = head;
}
else
{
temp2 -> next = temp1 -> next;
}
free(temp1);
}
}
printf("\nDeletion success!!!");
}
FuctionEnd:
}
void display()
{
if(head == NULL)
printf("\nList is Empty!!!");
else
{
struct Node *temp = head;
printf("\nList elements are: \n");
while(temp -> next != head)
{
printf("%d ---> ",temp -> data);
}
printf("%d ---> %d", temp -> data, head -> data);
}
}

Output:
File and Data Structures Lab Manual 303406

WeeK-4

Aim: Write a program that implement stack (its operations) using (i)Arrays (ii)Linked list(Pointers).

Source Code:

To implement stack using Arrays

#include<stdio.h>
#include<conio.h>

#define SIZE 10

void push(int);
void pop();
void display();

int stack[SIZE], top = -1;

void main()
{
int value, choice;
clrscr();
while(1){
printf("\n\n***** MENU *****\n");
printf("1. Push\n2. Pop\n3. Display\n4. Exit");
printf("\nEnter your choice: ");
scanf("%d",&choice);
switch(choice){
case 1: printf("Enter the value to be insert: ");
scanf("%d",&value);
push(value);
break;
case 2: pop();
break;
case 3: display();
break;
case 4: exit(0);
default: printf("\nWrong selection!!! Try again!!!");
}
}
}
void push(int value){
if(top == SIZE-1)
printf("\nStack is Full!!! Insertion is not possible!!!");
else{
top++;
stack[top] = value;
printf("\nInsertion success!!!");
}
}
void pop(){
if(top == -1)
printf("\nStack is Empty!!! Deletion is not possible!!!");
File and Data Structures Lab Manual 303406

else{
printf("\nDeleted : %d", stack[top]);
top--;
}
}
void display(){
if(top == -1)
printf("\nStack is Empty!!!");
else{
int i;
printf("\nStack elements are:\n");
for(i=top; i>=0; i--)
printf("%d\n",stack[i]);
}
}

Output

To implement stack using Linked list

Source Code:

#include<stdio.h>
#include<conio.h>

struct Node
{
int data;
struct Node *next;
}*top = NULL;

void push(int);
void pop();
void display();

void main()
{
int choice, value;
clrscr();
printf("\n:: Stack using Linked List ::\n");
while(1){
printf("\n****** MENU ******\n");
printf("1. Push\n2. Pop\n3. Display\n4. Exit\n");
printf("Enter your choice: ");
scanf("%d",&choice);
switch(choice){
case 1: printf("Enter the value to be insert: ");
scanf("%d", &value);
push(value);
File and Data Structures Lab Manual 303406

break;
case 2: pop(); break;
case 3: display(); break;
case 4: exit(0);
default: printf("\nWrong selection!!! Please try again!!!\n");
}
}
}
void push(int value)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode->data = value;
if(top == NULL)
newNode->next = NULL;
else
newNode->next = top;
top = newNode;
printf("\nInsertion is Success!!!\n");
}
void pop()
{
if(top == NULL)
printf("\nStack is Empty!!!\n");
else{
struct Node *temp = top;
printf("\nDeleted element: %d", temp->data);
top = temp->next;
free(temp);
}
}
void display()
{
if(top == NULL)
printf("\nStack is Empty!!!\n");
else{
struct Node *temp = top;
while(temp->next != NULL){
printf("%d--->",temp->data);
temp = temp -> next;
}
printf("%d--->NULL",temp->data);
}
}

Output:
File and Data Structures Lab Manual 303406

Week 5:

Aim: Write a program that implement Queue (its operations) using (i)Arrays (ii)Linked list(Pointers).

To implement Queue using Arrays

Source Code

#include<stdio.h>
#include<conio.h>
#define SIZE 10

void enQueue(int);
void deQueue();
void display();

int queue[SIZE], front = -1, rear = -1;

void main()
{
int value, choice;
clrscr();
while(1){
printf("\n\n***** MENU *****\n");
printf("1. Insertion\n2. Deletion\n3. Display\n4. Exit");
printf("\nEnter your choice: ");
scanf("%d",&choice);
switch(choice){
case 1: printf("Enter the value to be insert: ");
scanf("%d",&value);
enQueue(value);
break;
case 2: deQueue();
break;
case 3: display();
break;
case 4: exit(0);
default: printf("\nWrong selection!!! Try again!!!");
}
}
}
void enQueue(int value){
if(rear == SIZE-1)
printf("\nQueue is Full!!! Insertion is not possible!!!");
else{
if(front == -1)
front = 0;
rear++;
queue[rear] = value;
printf("\nInsertion success!!!");
}
}
void deQueue(){
File and Data Structures Lab Manual 303406

if(front == rear)
printf("\nQueue is Empty!!! Deletion is not possible!!!");
else{
printf("\nDeleted : %d", queue[front]);
front++;
if(front == rear)
front = rear = -1;
}
}
void display(){
if(rear == -1)
printf("\nQueue is Empty!!!");
else{
int i;
printf("\nQueue elements are:\n");
for(i=front; i<=rear; i++)
printf("%d\t",queue[i]);
}
}

Output:

To implement Queue Using Linked Lists

Source Code:

#include<stdio.h>
#include<conio.h>

struct Node
{
int data;
struct Node *next;
}*front = NULL,*rear = NULL;

void insert(int);
void delete();
void display();

void main()
{
int choice, value;
clrscr();
printf("\n:: Queue Implementation using Linked List ::\n");
while(1){
printf("\n****** MENU ******\n");
printf("1. Insert\n2. Delete\n3. Display\n4. Exit\n");
printf("Enter your choice: ");
scanf("%d",&choice);
File and Data Structures Lab Manual 303406

switch(choice){
case 1: printf("Enter the value to be insert: ");
scanf("%d", &value);
insert(value);
break;
case 2: delete(); break;
case 3: display(); break;
case 4: exit(0);
default: printf("\nWrong selection!!! Please try again!!!\n");
}
}
}
void insert(int value)
{
struct Node *newNode;
newNode = (struct Node*)malloc(sizeof(struct Node));
newNode->data = value;
newNode -> next = NULL;
if(front == NULL)
front = rear = newNode;
else{
rear -> next = newNode;
rear = newNode;
}
printf("\nInsertion is Success!!!\n");
}
void delete()
{
if(front == NULL)
printf("\nQueue is Empty!!!\n");
else{
struct Node *temp = front;
front = front -> next;
printf("\nDeleted element: %d\n", temp->data);
free(temp);
}
}
void display()
{
if(front == NULL)
printf("\nQueue is Empty!!!\n");
else{
struct Node *temp = front;
while(temp->next != NULL){
printf("%d--->",temp->data);
temp = temp -> next;
}
printf("%d--->NULL\n",temp->data);
}
}

Output:
File and Data Structures Lab Manual 303406

Week 6:

Aim: Write a program that implement Circular Queue (its operations) using Arrays.

Source Code:

#include<stdio.h>
#include<conio.h>
#define SIZE 5

void enQueue(int);
void deQueue();
void display();

int cQueue[SIZE], front = -1, rear = -1;

void main()
{
int choice, value;
clrscr();
while(1){
printf("\n****** MENU ******\n");
printf("1. Insert\n2. Delete\n3. Display\n4. Exit\n");
printf("Enter your choice: ");
scanf("%d",&choice);
switch(choice){
case 1: printf("\nEnter the value to be insert: ");
scanf("%d",&value);
enQueue(value);
break;
case 2: deQueue();
break;
case 3: display();
break;
case 4: exit(0);
default: printf("\nPlease select the correct choice!!!\n");
}
}
}
void enQueue(int value)
{
if((front == 0 && rear == SIZE - 1) || (front == rear+1))
printf("\nCircular Queue is Full! Insertion not possible!!!\n");
else{
if(rear == SIZE-1 && front != 0)
rear = -1;
cQueue[++rear] = value;
printf("\nInsertion Success!!!\n");
if(front == -1)
front = 0;
}
}
void deQueue()
{
File and Data Structures Lab Manual 303406

if(front == -1 && rear == -1)

printf("\nCircular Queue is Empty! Deletion is not possible!!!\n");
else{
printf("\nDeleted element : %d\n",cQueue[front++]);
if(front == SIZE)
front = 0;
if(front-1 == rear)
front = rear = -1;
}
}
void display()
{
if(front == -1)
printf("\nCircular Queue is Empty!!!\n");
else{
int i = front;
printf("\nCircular Queue Elements are : \n");
if(front <= rear){
while(i <= rear)
printf("%d\t",cQueue[i++]);
}
else{
while(i <= SIZE - 1)
printf("%d\t", cQueue[i++]);
i = 0;
while(i <= rear)
printf("%d\t",cQueue[i++]);
}
}
}

Output:
File and Data Structures Lab Manual 303406

Week 7:

Aim: Write a program that implements the following Sorting a. Bubble Sorting b. Insertion Sort c.
Quick sort

Source Code: To implements Bubble Sorting

#include <stdio.h>

int main()
{
int array[100], n, c, d, swap;

printf("Enter number of elements\n");

scanf("%d", &n);

printf("Enter %d integers\n", n);

for (c = 0; c < n; c++)

scanf("%d", &array[c]);

for (c = 0 ; c < n - 1; c++)

{
for (d = 0 ; d < n - c - 1; d++)
{
if (array[d] > array[d+1])
{
swap = array[d];
array[d] = array[d+1];
array[d+1] = swap;
}
}
}

printf("Sorted list in ascending order:\n");

for (c = 0; c < n; c++)

printf("%d\n", array[c]);

return 0;
}

Output:

Source Code: To implements Insertion Sorting

File and Data Structures Lab Manual 303406

#include <stdio.h>

int main()
{
int n, array[1000], c, d, t, flag = 0;

printf("Enter number of elements\n");

scanf("%d", &n);

printf("Enter %d integers\n", n);

for (c = 0; c < n; c++)

scanf("%d", &array[c]);

for (c = 1 ; c <= n - 1; c++) {

t = array[c];

for (d = c - 1 ; d >= 0; d--) {

if (array[d] > t) {
array[d+1] = array[d];
flag = 1;
}
else
break;
}
if (flag)
array[d+1] = t;
}

printf("Sorted list in ascending order:\n");

for (c = 0; c <= n - 1; c++) {

printf("%d\n", array[c]);
}

return 0;
}

Source Code: To implements Quick Sorting

#include <stdio.h>

// function to swap elements

void swap(int *a, int *b) {
int t = *a;
*a = *b;
*b = t;
}

// function to find the partition position

int partition(int array[], int low, int high) {

// select the rightmost element as pivot

int pivot = array[high];
File and Data Structures Lab Manual 303406

// pointer for greater element

int i = (low - 1);

// traverse each element of the array

// compare them with the pivot
for (int j = low; j < high; j++) {
if (array[j] <= pivot) {

// if element smaller than pivot is found

// swap it with the greater element pointed by i
i++;

// swap element at i with element at j

swap(&array[i], &array[j]);
}
}

// swap the pivot element with the greater element at i

swap(&array[i + 1], &array[high]);

// return the partition point

return (i + 1);
}

void quickSort(int array[], int low, int high) {

if (low < high) {

// find the pivot element such that

// elements smaller than pivot are on left of pivot
// elements greater than pivot are on right of pivot
int pi = partition(array, low, high);

// recursive call on the left of pivot

quickSort(array, low, pi - 1);

// recursive call on the right of pivot

quickSort(array, pi + 1, high);
}
}

// function to print array elements

void printArray(int array[], int size) {
for (int i = 0; i < size; ++i) {
printf("%d ", array[i]);
}
printf("\n");
}

// main function
int main() {
int data[] = {8, 7, 2, 1, 0, 9, 6};

int n = sizeof(data) / sizeof(data[0]);

printf("Unsorted Array\n");
printArray(data, n);

// perform quicksort on data

quickSort(data, 0, n - 1);
File and Data Structures Lab Manual 303406

printf("Sorted array in ascending order: \n");

printArray(data, n);
}

Output:

Week 8:

Aim: Write a program to implements binary tree traversal

Source Code:

#include <stdio.h>
#include <conio.h>
#include <malloc.h>
struct node
{
struct node *left;
int data;
struct node *right;
};

void main()
{
void insert(struct node **,int);
void inorder(struct node *);
void postorder(struct node *);
void preorder(struct node *);

struct node *ptr;

int no,i,num;

ptr = NULL;
ptr->data=NULL;
clrscr();

printf("\nProgram for Tree Traversal\n");

printf("Enter the number of nodes to add to the tree.<BR>\n");
scanf("%d",&no);

for(i=0;i<no;i++)
{
printf("Enter the item\n");
scanf("%d",&num);
insert(&ptr,num);
}

//getch();
printf("\nINORDER TRAVERSAL\n");
inorder(ptr);

printf("\nPREORDER TRAVERSAL\n");
preorder(ptr);

printf("\nPOSTORDER TRAVERSAL\n");
postorder(ptr);
File and Data Structures Lab Manual 303406

getch();
}

void insert(struct node **p,int num)

{
if((*p)==NULL)
{
printf("Leaf node created.");
(*p)=malloc(sizeof(struct node));
(*p)->left = NULL;
(*p)->right = NULL;
(*p)->data = num;
return;
}
else
{
if(num==(*p)->data)
{
printf("\nREPEATED ENTRY ERROR VALUE REJECTED\n");
return;
}
if(num<(*p)->data)
{
printf("\nDirected to left link.\n");
insert(&((*p)->left),num);
}
else
{
printf("Directed to right link.\n");
insert(&((*p)->right),num);
}
}
return;
}

void inorder(struct node *p)

{
if(p!=NULL)
{
inorder(p->left);
printf("\nData :%d",p->data);
inorder(p->right);
}
else
return;
}

void preorder(struct node *p)

{
if(p!=NULL)
{
printf("\nData :%d",p->data);
preorder(p->left);
preorder(p->right);
}
else
return;
}
File and Data Structures Lab Manual 303406

void postorder(struct node *p)

{
if(p!=NULL)
{
postorder(p->left);
postorder(p->right);
printf("\nData :%d",p->data);
}
else
return;
}

Output:
File and Data Structures Lab Manual 303406

Week 9:

Aim: Write a program to convert an expression Infix to Postfix.

Source Code:

#include<stdio.h>

#include<math.h>

#include<string.h>

#include <stdlib.h>

#define MAX 20

void push(int);

char pop();

void infix_to_prefix();

int precedence (char);

char stack[20],infix[20],prefix[20];

int top = -1;

int main()

printf("\nINPUT THE INFIX EXPRESSION : ");

scanf("%s",infix);

infix_to_prefix();

return 0;

// method that pushes the elements onto the character stack

void push(int pos)

if(top == MAX-1)

printf("\nSTACK OVERFLOW\n");
File and Data Structures Lab Manual 303406

else {

top++;

stack[top] = infix[pos];

}}

// method that removes character from stack and returns them

char pop()

char ch;

if(top < 0)

printf("\nSTACK UNDERFLOW\n");

exit(0);

else

ch = stack[top];

stack[top] = '\0';

top--;

return(ch);

return 0;

// method that converts String from infix to prefix

// all the strings are assumed to be valid expressions

void infix_to_prefix()

int i = 0,j = 0;
File and Data Structures Lab Manual 303406

strrev(infix); // Reverse the infix expression

while(infix[i] != '\0')

// if an alphabet is found then copy it to the output string

if(infix[i] >= 'a' && infix[i] <= 'z')

prefix[j] = infix[i];

j++;

i++;

// In the reversed string, closing bracket will be found first so put it in the stack

else if(infix[i] == ')' || infix[i] == '}' || infix[i] == ']')

push(i);

i++;

// if an opening bracket is found, then

else if(infix[i] == '(' || infix[i] == '{' || infix[i] == '[') /* when closing bracket is found */

if(infix[i] == '(')

while(stack[top] != ')') /* pop till opening bracket is found */

prefix[j] = pop();

j++;

pop();

i++;

else if(infix[i] == '[')

File and Data Structures Lab Manual 303406

while(stack[top] != ']') /* pop till corresponding opening bracket is found */

prefix[j] = pop();

j++;

pop();

i++;

else if(infix[i] == '{')

while(stack[top] != '}') /*pop till corresponding opening bracket is found*/

prefix[j] = pop();

j++;

pop();

i++;

}}

else

// if the stack if empty, then we simply put the operator in stack

if(top == -1)

push(i);

i++;

// if the precedence of operator is less than the stack top then

else if( precedence(infix[i]) < precedence(stack[top]))

{
File and Data Structures Lab Manual 303406

prefix[j] = pop(); // pop the stack top and add it to the prefix string

j++;

// if you have an operator that has precedence greater than operator

while(precedence(stack[top]) > precedence(infix[i])){

prefix[j] = pop(); // Pop the operator

j++;

if(top < 0) {

break;

}}

push(i);

i++;

// if the precedence of operator is greater than or equal to the stack top

else if(precedence(infix[i]) >= precedence(stack[top]))

push(i); // Push it onto the stack

i++;

}}}

// At the end remove all the operators from the stack

while(top != -1)

prefix[j] = pop();

j++;

// Reverse the final string before output

strrev(prefix);

prefix[j] = '\0';

printf("EQUIVALENT PREFIX NOTATION : %s ",prefix);

}
File and Data Structures Lab Manual 303406

/* Function to return precedence of operators */

int precedence(char alpha)

if(alpha == '+' || alpha =='-')

return(1);

if(alpha == '*' || alpha =='/')

return(2);

return 0;

Output:
File and Data Structures Lab Manual 303406

Week 10:

Aim: Write a program to implements Binary Search Algorithm

Source Code:

#include<stdio.h>
#include<conio.h>

void main()
{
int first, last, middle, size, i, item, list[100];

printf("Enter the size of the list: ");

scanf("%d",&size);

printf("Enter %d integer values in Assending order\n", size);

for (i = 0; i < size; i++)

scanf("%d",&list[i]);

printf("Enter value to be search: ");

scanf("%d", &item);

first = 0;
last = size - 1;
middle = (first+last)/2;

while (first <= last) {

if (list[middle] < item)
first = middle + 1;
else if (list[middle] == item) {
printf("Element found at index %d.\n",middle);
break;
}
else
last = middle - 1;

middle = (first + last)/2;

}
if (first > last)
printf("Element Not found in the list.");
getch();
}

Output:

Signature of Faculty: