Scribd
Upload
54 views2 pages

MasterTop 314ULv3

MasterTop® 314UL is a solvent-free, self-leveling epoxy-based underlay designed for industrial flooring, offering excellent mechanical properties and chemical resistance. It can be applied in thicknesses of 1.0 mm to 5 mm and is suitable for various industries including automotive, pharmaceuticals, and food production. The product requires proper surface preparation and has a curing time of 7 days for full chemical and mechanical resistance.

Uploaded by

sunilbauchkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views2 pages

MasterTop 314ULv3

MasterTop® 314UL is a solvent-free, self-leveling epoxy-based underlay designed for industrial flooring, offering excellent mechanical properties and chemical resistance. It can be applied in thicknesses of 1.0 mm to 5 mm and is suitable for various industries including automotive, pharmaceuticals, and food production. The product requires proper surface preparation and has a curing time of 7 days for full chemical and mechanical resistance.

Uploaded by

sunilbauchkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MasterTop® 314UL

Self Levelling epoxy -based underlay for industrial flooring.

DESCRIPTION Tensile strength (BS 6319 15 MPa at 7 days


MasterTop 314UL is a solvent-free self levelling, part 7)
three components system comprises of resin, Hardness, Shore D (ASTM D > 85
hardener and fillers. It can be applied between 1.0 2240)
mm to 5 mm thickness where floor needs levelling Adhesive bond strength to > 1.5 MPa
before the application of industrial flooring. concrete (Concrete Fail)
MasterTop 341UL is chemical resistant and has (ASTM D4541)
excellent mechanical properties
Application Thickness 1.0 mm to 5 mm
RECOMMENDED USES
MasterTop 314UL is recommended as a underlays APPLICATION
for industrial resin floors, where excellent
mechanical properties and chemical resistance are
essential. It is ideal for: Surface Preparation
 Automotive manufacturing The compressive strength of the substrate shall not
 Pharmaceutical labs and clean rooms be less than 25 MPa. The concrete slab in contact
 Manufacturing and storage areas with the ground must have a vapour barrier installed
 Electronics and electrical industry in compliance with DIN 18195 or equivalent. The
 Chemical Industry moisture content of the substrate shall not be higher
 Textile and paper mills than 4% throughout. The temperature of the
 Food & beverage production substrate must be at least 3⁰C above the current
dew point temperature.
FEATURES AND BENEFITS Remove oil, grease and wax contaminants by
scrubbing with industrial grade detergent or
 Solvent-free
degreasing compounds followed by mechanical
 Chemical, abrasion and impact resistant - cleaning. Cement laitance, loose particles, mould
Withstands chemical and mechanical attack. release agents, curing membranes and other
Lower maintenance cost. contaminants must be removed from the surface by
 Non-slip - Safe working areas. shot blasting, grinding or similar method followed by
 Impervious (at lower Aggregate content) – vacuum cleaning. The bond strength of the
prevents staining substrate must be at least 1.5 MPa. For filing up
 Pre-proportioned, consistent surface irregularities such as honeycombs, use a
MasterEmaco repair mortar.
PROPERTIES Any joints in the base concrete, for eg: construction
joint should be brought to the finished surface and
Mixed density 1.85 kg/litre suitably sealed.
Pot Life 25 mins
Curing Time PRIMER (MasterTop P1620)
Foot Traffic 24 hours
Vehicular traffic 48 hours Mixing
Chemical Resistance 7 days Use a low electric drill fitted with a paint mixer or a
Over Coating Time wing type paddle. Mix Part A of MasterTop 314UL
Minimum 18 Hours with MasterTop 314UL Part B for 1 minutes until the
mix is uniform and free of streaks. Continue to mix
Maximum 48 Hours slowly adding MasterTop Filler F 30. Mix for a
Compressive strength 50 MPa at 1 day
further 2 - 3 minutes until a uniform mass and colour
(ASTM C109) 70 MPa at 7 days is obtained.
Flexural strength (BS 6319 15 MPa at 7 days
part 3)
Placing

Page 1 of 2
MasterTop® 314UL
Thickness (in mm) Coverage (Sqm per Pack)
Depending on the substrate condition, apply 5.5 to 1.0 12.95
6.5 m2/kg of the primer, using a roller or squeegee. 1.5 8.60
2.0 6.45
BODY COAT
3.0 4.32
Mixing
Mix MasterTop 314UL Part A with MasterTop
314UL Part B and mix for at least 2 minutes until the PACKAGING
mix is uniform and free of streaks. Continue to mix MasterTop 314UL Part A 5.00 kg/pail
slowly adding MasterTop Filler F 30. Mix for a
further 3 minutes until a uniform mass and colour is MasterTop 314UL Part B Part B 1.94 kg/pail
obtained. MasterTop Filler F30 17.06 kg/bag
Placing
The mixed MasterTop 314 UL shall be applied to SHELF LIFE
the prepared and primed surface without any delay MasterTop 314UL has a shelf life of 12 months.
using a trowel / depth set rake to achieve desired
thickness. Rolling should commence immediately Store out of direct sunlight, clear of the ground on
with spike roller in order to release any entrapped pallets protected from rainfall.
air from the mix and also to blend out any trowel
mark.
PRECAUTIONS
Curing
It is highly recommended to use necessary PPE
Waiting times between MasterTop P1620 and (Gloves, mask etc.,) during installation of the
MasterTop 314UL should not be less than 16 product. In case of Incidents of direct inhalation,
hours and not more than 48 hours. Where extended causing dizziness/giddiness, loss of
over coating times are envisaged then the cured consciousness, contact with eyes etc, seek
primer reactivated by lightly abrading the surface immediate medical advice. The requirements may
and solvent wiping. MasterTop 314UL should be vary depending on the application areas. Please
protected from traffic and spillage for at least 48 ensure to have proper ventilation while working in
hours. Full chemical and mechanical resistance is confined areas. Contact Master Builders Solutions
obtained after 7 days. representative in case you need further details or
Application of subsequent resin topping shall be refer to the material safety datasheet of the product
commenced after 24 Hrs but not later than 48 Hrs to know more.
after the installation of MasterTop 314UL .
Refer TDS no : MasterTop 314UL/03/04/2021
ESTIMATING DATA
A 24.00 kg unit of MasterTop 314UL on fair faced
primed substrate can cover:

® = registered trademark of a MBCC Group member in many countries of the world

STATEMENT OF The technical information and application advice given in this Master Builders Solutions publication are based on the
RESPONSIBILITY present state of our best scientific and practical knowledge. As the information herein is of a general nature, no
(Disclaimer) assumption can be made as to a product's suitability for a particular use or application and no warranty as to its
accuracy, reliability or completeness either expressed or implied is given other than those required by law. The user is
responsible for checking the suitability of products for their intended use.

NOTE Field service where provided does not constitute supervisory responsibility. Suggestions made by Master Builders
Solutions either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not Master Builders Solutions, are responsible for carrying out procedures appropriate to a specific
application.
Master Builders Solutions India Private Limited
Registered office: Plot No D-126,
TTC Industrial Area, MIDC,
Shiravane, Navi Mumbai - 400706,
Maharashtra, India
Tel: +91 8657906776
E-mail: [email protected]
www.master-builders-solutions.com/en-in

You might also like