NSE4_FGT-7.0.examcollection.premium.exam.
60q
Number: NSE4_FGT-7.0
Passing Score: 800
Time Limit: 120 min
File Version: 1.0
NSE4_FGT-7.0
Fortinet NSE 4 - FortiOS 7.0
Version 1.0
This file was created using VCE Simulator from Avanset.com
18A071942EF52D4BF3A9EA6ABD39648F
Exam A
QUESTION 1
Which two statements about FortiGate FSSO agentless polling mode are true? (Choose two.)
A. FortiGate uses the AD server as the collector agent.
B. FortiGate uses the SMB protocol to read the event viewer logs from the DCs.
C. FortiGate does not support workstation check.
D. FortiGate directs the collector agent to use a remote LDAP server.
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD47732
QUESTION 2
FortiGuard categories can be overridden and defined in different categories. To create a web rating
override for example.com home page, the override must be configured using a specific syntax.
Which two syntaxes are correct to configure web rating override for the home page? (Choose two.)
A. www.exaple.com
B. www.example.com/index.html
C. example.com
D. www.example.com:443
Correct Answer: AC
Section:
Explanation
Explanation/Reference:
Explanation:
When using FortiGuard category filtering to allow or block access to a website, one option is to make a web
rating override and define the website in a different category. Web ratings are only for host names— "no
URLs or wildcard characters are allowed".
QUESTION 3
Refer to the exhibits to view the firewall policy (Exhibit A) and the antivirus profile (Exhibit B).
Exhibit A.
18A071942EF52D4BF3A9EA6ABD39648F
Exhibit B.
18A071942EF52D4BF3A9EA6ABD39648F
Which statement is correct if a user is unable to receive a block replacement message when downloading
an infected file for the first time?
A. The flow-based Inspection is used, which resets the last packet to the user.
B. The volume of traffic being inspected is too high for this model of FortiGate.
C. The firewall policy performs the full content inspection on the file.
D. The intrusion prevention security profile needs to be enabled when using flow-based inspection mode.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
QUESTION 4
Which three options are the remote log storage options you can configure on FortiGate? (Choose three.)
A. FortiSandbox
B. FortiCloud
C. FortiSIEM
18A071942EF52D4BF3A9EA6ABD39648F
D. FortiCache
E. FortiAnalyzer
Correct Answer: BCE
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/265052/logging-and-reporting-
overview
QUESTION 5
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
A. NetAPI polling can increase bandwidth usage in large networks.
B. The NetSessionEnum function is used to track user logouts.
C. The collector agent must search security event logs.
D. The collector agent uses a Windows API to query DCs for user logins.
Correct Answer: B
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/microsites/search.do?
cmd=displayKC&docType=kc&externalId=FD34906&sliceId=1&docTypeID=DT_KCARTICLE_1_1&dialogI
D=210966035&stateId=1%200%20210968009%27)
QUESTION 6
Refer to the exhibit.
18A071942EF52D4BF3A9EA6ABD39648F
An administrator is running a sniffer command as shown in the exhibit.
Which three pieces of information are included in the sniffer output? (Choose three.)
A. Interface name
B. IP header
C. Application header
D. Packet payload
E. Ethernet header
Correct Answer: ABD
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=11186
QUESTION 7
Refer to the exhibits.
Exhibit A.
Exhibit B.
18A071942EF52D4BF3A9EA6ABD39648F
The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of
diagnose sys virtual-wan-link health-check.
Which interface will be selected as an outgoing interface?
A. port2
B. port3
C. port4
D. port1
Correct Answer: D
Section:
Explanation
Explanation/Reference:
Explanation:
The lowest latency link will be chosen, which is port 1.
QUESTION 8
An administrator does not want to report the logon events of service accounts to FortiGate.
What setting on the collector agent is required to achieve this?
A. Add user accounts to the Ignore User List.
B. Add the support of NTLM authentication.
C. Add user accounts to the FortiGate group filter.
D. Add user accounts to Active Directory (AD).
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38828
QUESTION 9
Refer to the exhibit.
18A071942EF52D4BF3A9EA6ABD39648F
The global settings on a FortiGate device must be changed to align with company security policies.
What does the Administrator account need to access the FortiGate global settings?
A. Enable two-factor authentication
B. Change Administrator profile
C. Change password
D. Enable restrict access to trusted hosts.
Correct Answer: B
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD34502
QUESTION 10
Which two statements are true about the Security Fabric rating? (Choose two.)
A. The Security Fabric rating is a free service that comes bundled with all FortiGate devices.
B. Many of the security issues can be fixed immediately by clicking Apply where available.
C. The Security Fabric rating must be run on the root FortiGate device in the Security Fabric.
D. It provides executive summaries of the four largest areas of security focus.
Correct Answer: BC
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.4.0/administration-guide/292634/security-rating
QUESTION 11
An administrator has configured outgoing interface any in a firewall policy.
Which statement is true about the policy list view?
A. Interface Pair view will be disabled.
B. Search option will be disabled.
C. Policy lookup will be disabled.
18A071942EF52D4BF3A9EA6ABD39648F
D. By Sequence view will be disabled.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
QUESTION 12
Refer to the exhibit.
Given the interfaces shown in the exhibit, which two statements are true? (Choose two.)
A. Traffic between port2 and port2-vlan1 is allowed by default.
B. port1-vlan10 and port2-vlan10 are part of the same broadcast domain.
C. port1-vlan1 and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.
D. port1 is a native VLAN.
Correct Answer: CD
Section:
Explanation
Explanation/Reference:
QUESTION 13
A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec
VPN tunnels and static routes.
All traffic must be routed through the primary tunnel when both tunnels are up
The secondary tunnel must be used only if the primary tunnel goes down
In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover
Which two key configuration changes are needed in FortiGate to meet the design requirements? (Choose
two.)
A. Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static
route for the secondary tunnel.
B. Enable Dead Peer Detection.
C. Enable Auto-negotiate and Auto Keep Alive on the phase 2 configuration of both tunnels.
18A071942EF52D4BF3A9EA6ABD39648F
D. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static
route for the secondary tunnel.
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
QUESTION 14
Refer to the exhibit.
The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster.
The override setting is enable for the FortiGate with SN FGVM010000064692.
Which two statements are true? (Choose two.)
A. FortiGate SN FGVM010000065036 HA uptime has been reset.
B. FortiGate devices are not in sync because one device is down.
C. FortiGate SN FGVM010000064692 is the primary because of higher HA uptime.
D. FortiGate SN FGVM010000064692 has the higher HA priority.
Correct Answer: AD
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/666653/primary-unit-selection-with-
override-disabled-default
QUESTION 15
Refer to the exhibits.
Exhibit A shows system performance output.
Exhibit B shows s FortiGate configured with the default configuration of high memory usage thresholds.
18A071942EF52D4BF3A9EA6ABD39648F
Based on the system performance output, which two statements are correct? (Choose two.)
A. FortiGate will start sending all files to FortiSandbox for inspection.
B. FortiGate has entered conserve mode.
C. Administrators cannot change the configuration.
D. Administrators can access FortiGate only through the console port.
Correct Answer: BC
Section:
Explanation
Explanation/Reference:
Reference: https://www.skillfulist.com/fortigate/fortigate-conserve-mode-how-to-stop-it-and-what-it-means/
QUESTION 16
An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in
both sites has been configured as Static IP Address. For site A, the local quick mode selector is
192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?
A. 192.168.3.0/24
B. 192.168.1.0/24
C. 192.168.0.0/8
D. 192.168.2.0/24
Correct Answer: D
Section:
Explanation
Explanation/Reference:
QUESTION 17
Refer to the exhibits.
Exhibit A.
18A071942EF52D4BF3A9EA6ABD39648F
Exhibit B.
18A071942EF52D4BF3A9EA6ABD39648F
The SSL VPN connection fails when a user attempts to connect to it.
What should the user do to successfully connect to SSL VPN?
A. Change the SSL VPN port on the client.
B. Change the Server IP address.
C. Change the idle-timeout.
D. Change the Server IP address.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference:
https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/150494
QUESTION 18
Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.)
A. The client FortiGate requires a client certificate signed by the CA on the server FortiGate.
B. The client FortiGate requires a manually added route to remote subnets.
C. The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VPN.
D. Server FortiGate requires a CA certificate to verify the client FortiGate certificate.
Correct Answer: CD
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.2.9/cookbook/266506/ssl-vpn-with-certificate-
authentication
QUESTION 19
Refer to the exhibit.
18A071942EF52D4BF3A9EA6ABD39648F
The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are
configured in transparent mode.
The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the
internet. The To_Internet VDOM is the only VDOM with internet access and is directly connected to ISP
modem.
With this configuration, which statement is true?
A. Inter-VDOM links are required to allow traffic between the Local and Root VDOMs.
B. A default static route is not required on the To_Internet VDOM to allow LAN users to access the
internet.
C. Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs.
D. Inter-VDOM links are not required between the Root and To_Internet VDOMs because the Root
VDOM is used only as a management VDOM.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD46542
QUESTION 20
Refer to the exhibits.
Exhibit A.
18A071942EF52D4BF3A9EA6ABD39648F
Exhibit B.
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric.
After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?
A. Change the csf setting on Local-FortiGate (root) to set configuration-sync local.
B. Change the csf setting on ISFW (downstream) to set configuration-sync local.
C. Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default.
D. Change the csf setting on ISFW (downstream) to set fabric-object-unification default.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD43820
QUESTION 21
Refer to the exhibit, which contains a session list output.
18A071942EF52D4BF3A9EA6ABD39648F
Based on the information shown in the exhibit, which statement is true?
A. One-to-one NAT IP pool is used in the firewall policy.
B. Destination NAT is disabled in the firewall policy.
C. Port block allocation IP pool is used in the firewall policy.
D. Overload NAT IP pool is used in the firewall policy.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
QUESTION 22
Which two statements are correct about SLA targets? (Choose two.)
A. You can configure only two SLA targets per one Performance SLA.
B. SLA targets are optional.
C. SLA targets are required for SD-WAN rules with a Best Quality strategy.
D. SLA targets are used only when referenced by an SD-WAN rule.
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/382233/performance-sla-sla-
targets
QUESTION 23
Refer to the exhibit, which contains a session diagnostic output.
18A071942EF52D4BF3A9EA6ABD39648F
Which statement is true about the session diagnostic output?
A. The session is in SYN_SENT state.
B. The session is in FIN_WAIT state.
C. The session is in ESTABLISHED state.
D. The session is in FIN_ACK state.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/viewContent.do?externalId=FD30042
QUESTION 24
Which statement is correct regarding the inspection of some of the services available by web applications
embedded in third-party websites?
A. The security actions applied on the web applications will also be explicitly applied on the third-party
websites.
B. The application signature database inspects traffic only from the original web application server.
C. FortiGuard maintains only one signature of each web application that is unique.
D. FortiGate can inspect sub-application traffic regardless where it was originated.
Correct Answer: D
Section:
Explanation
Explanation/Reference:
Reference: https://help.fortinet.com/fortiproxy/11/Content/Admin%20Guides/FPX-
AdminGuide/300_System/303d_FortiGuard.htm
QUESTION 25
Which engine handles application control traffic on the next-generation firewall (NGFW) FortiGate?
A. Intrusion prevention system engine
B. Detection engine
C. Flow engine
D. Antivirus engine
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: http://docs.fortinet.com/document/fortigate/6.0.0/handbook/240599/application-control
QUESTION 26
Why does FortiGate keep TCP sessions in the session table for several seconds, even after both sides
(client and server) have terminated the session?
A. To allow for out-of-order packets that could arrive after the FIN/ACK packets
B. To finish any inspection operations
C. To generate logs
D. To remove the NAT operation
Correct Answer: A
Section:
Explanation
18A071942EF52D4BF3A9EA6ABD39648F
Explanation/Reference:
Explanation:
TCP provides the ability for one end of a connection to terminate its output while still receiving data from
the other end. This is called a half-close. FortiGate unit implements a specific timer before removing an
entry in the firewall session table.
QUESTION 27
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The
administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, what configuration change will bring phase 2 up?
A. On HQ-FortiGate, enable Auto-negotiate.
B. On HQ-FortiGate, enable Diffie-Hellman Group 2.
C. On HQ-FortiGate, set Encryption to AES256.
D. On Remote-FortiGate, set Seconds to 43200.
Correct Answer: C
Section:
Explanation
Explanation/Reference:
Explanation:
Encryption and authentication algorithm needs to match in order for IPSEC be successfully established.
QUESTION 28
Refer to the exhibit.
18A071942EF52D4BF3A9EA6ABD39648F
Examine the intrusion prevention system (IPS) diagnostic command.
Which statement is correct if option 5 was used with the IPS diagnostic command and the outcome was a
decrease in the CPU usage?
A. The IPS engine will continue to run in a normal state.
B. The IPS engine was unable to prevent an intrusion attack.
C. The IPS engine was blocking all traffic.
D. The IPS engine was inspecting high volume of traffic.
Correct Answer: D
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.2.3/cookbook/232929/troubleshooting-high-cpu-
usage
QUESTION 29
An administrator has configured the following settings:
What are the two results of this configuration? (Choose two.)
A. A session for denied traffic is created.
B. Denied users are blocked for 30 minutes.
C. The number of logs generated by denied traffic is reduced.
D. Device detection on all interfaces is enforced for 30 minutes.
Correct Answer: AC
Section:
18A071942EF52D4BF3A9EA6ABD39648F
Explanation
Explanation/Reference:
Reference:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD46328
QUESTION 30
Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?
A. get system performance status
B. get system status
C. get system arp
D. diagnose sys top
Correct Answer: C
Section:
Explanation
Explanation/Reference:
QUESTION 31
Refer to the exhibit.
Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.)
A. There are five devices that are part of the security fabric.
B. There are 19 security recommendations for the security fabric.
C. Device detection is disabled on all FortiGate devices.
D. This security fabric topology is a logical topology view.
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
References:
https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/761085/results
18A071942EF52D4BF3A9EA6ABD39648F
https://docs.fortinet.com/document/fortimanager/6.2.0/new-features/736125/security-fabric-topology
QUESTION 32
A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address
is dynamic. In addition, the remote peer does not support a dynamic DNS update service.
What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN
tunnel to work?
A. Dialup User
B. Static IP Address
C. Pre-shared Key
D. Dynamic DNS
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Explanation:
Dialup user is used when the remote peer's IP address is unknown. The remote peer whose IP address is
unknown acts as the dialup clien and this is often the case for branch offices and mobile VPN clients that
use dynamic IP address and no dynamic DNS
QUESTION 33
An administrator wants to configure Dead Peer Detection (DPD) on IPSEC VPN for detecting dead tunnels.
The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel.
Which DPD mode on FortiGate will meet the above requirement?
A. On Demand
B. Disabled
C. On Idle
D. Enabled
Correct Answer: C
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD40813
QUESTION 34
Which three statements about a flow-based antivirus profile are correct? (Choose three.)
A. IPS engine handles the process as a standalone
B. Flow-based inspection uses a hybrid of scanning modes available in proxy-based inspection.
C. If the virus is detected, the last packet is delivered to the client.
D. Optimized performance compared to proxy-based inspection.
E. FortiGate buffers the whole file but transmits to the client simultaneously.
Correct Answer: BDE
Section:
Explanation
Explanation/Reference:
Reference: https://forum.fortinet.com/tm.aspx?m=192309
QUESTION 35
An administrator has configured a strict RPF check on FortiGate.
18A071942EF52D4BF3A9EA6ABD39648F
Which statement is true about the strict RPF check?
A. The strict RPF check is run on the first sent and reply packet of any new session.
B. Strict RPF checks the best route back to the source using the incoming interface.
C. Strict RPF checks only for the existence of at least one active route back to the source using the
incoming interface.
D. Strict RPF allows packets back to sources with all active routes.
Correct Answer: B
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD33955
QUESTION 36
Refer to the exhibit.
Review the Intrusion Prevention System (IPS) profile signature settings.
Which statement is correct in adding the FTP.Login.Failed signature to the IPS sensor profile?
A. Traffic matching the signature will be silently dropped and logged.
B. The signature setting uses a custom rating threshold.
C. The signature setting includes a group of other signatures.
D. Traffic matching the signature will be allowed and logged.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
QUESTION 37
Refer to the exhibit.
18A071942EF52D4BF3A9EA6ABD39648F
The exhibit shows the IPS sensor configuration.
If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)
A. The sensor will block all attacks aimed at Windows servers.
B. The sensor will gather a packet log for all matched traffic.
C. The sensor will allow attackers matching the NTP.Spoofed.KoD.DoS signature.
D. The sensor will reset all connections that match these signatures.
Correct Answer: AC
Section:
Explanation
Explanation/Reference:
QUESTION 38
Which two attributes are required on a certificate so it can be used as a CA certificate on SSL Inspection?
(Choose two.)
A. The CA extension must be set to TRUE.
B. The issuer must be a public CA.
C. The common name on the subject field must use a wildcard name.
D. The keyUsage extension must be set to keyCertSign.
Correct Answer: AD
Section:
Explanation
Explanation/Reference:
Reference: https://www.reddit.com/r/fortinet/comments/c7j6jg/recommended_ssl_cert/
QUESTION 39
A network administrator has enabled SSL certificate inspection and antivirus on FortiGate. When
18A071942EF52D4BF3A9EA6ABD39648F
downloading an EICAR test file through HTTP, FortiGate detects the virus and blocks the file. When
downloading the same file through HTTPS, FortiGate does not detect the virus and the file can be
downloaded.
What is the reason for the failed virus detection by FortiGate?
A. Antivirus definitions are not up to date.
B. SSL/SSH Inspection profile is incorrect.
C. Antivirus profile configuration is incorrect.
D. Application control is not enabled.
Correct Answer: B
Section:
Explanation
Explanation/Reference:
QUESTION 40
Which two protocols are used to enable administrator access of a FortiGate device? (Choose two.)
A. FortiTelemetry
B. HTTPS
C. SSH
D. FTM
Correct Answer: BC
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.4.0/hardening-your-fortigate/995103/building-
security-into-fortios
QUESTION 41
Refer to the exhibit.
Given the routing database shown in the exhibit, which two statements are correct? (Choose two.)
A. The port3 default route has the lowest metric.
B. There will be eight routes active in the routing table.
C. The port1 and port2 default routes are active in the routing table.
D. The port3 default route has the highest distance.
18A071942EF52D4BF3A9EA6ABD39648F
Correct Answer: CD
Section:
Explanation
Explanation/Reference:
QUESTION 42
Which statement about the policy ID number of a firewall policy is true?
A. It changes when firewall policies are reordered.
B. It defines the order in which rules are processed.
C. It represents the number of objects used in the firewall policy.
D. It is required to modify a firewall policy using the CLI.
Correct Answer: D
Section:
Explanation
Explanation/Reference:
QUESTION 43
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)
A. Operating mode
B. NGFW mode
C. System time
D. FortiGuard update servers
Correct Answer: AB
Section:
Explanation
Explanation/Reference:
QUESTION 44
Refer to the exhibits.
Exhibit A.
18A071942EF52D4BF3A9EA6ABD39648F
Exhibit B.
18A071942EF52D4BF3A9EA6ABD39648F
The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) for
Facebook.
Users are given access to the Facebook web application. They can play video content hosted on Facebook
but they are unable to leave reactions on videos or other types of posts.
Which part of the policy configuration must you change to resolve the issue?
A. Add Facebook in the URL category in the security policy.
B. Additional application signatures are required to add to the security policy.
C. Force access to Facebook using the HTTP service.
D. The SSL inspection needs to be a deep content inspection.
Correct Answer: D
Section:
Explanation
Explanation/Reference:
Explanation:
The lock logo behind Facebook_like.Button indicates that SSL Deep Inspection is Required.
QUESTION 45
When configuring a firewall virtual wire pair policy, which following statement is true?
A. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.
B. Only a single virtual wire pair can be included in each policy.
C. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction
settings.
18A071942EF52D4BF3A9EA6ABD39648F
D. Exactly two virtual wire pairs need to be included in each policy.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48690
QUESTION 46
Refer to the exhibit, which contains a radius server configuration.
An administrator added a configuration for a new RADIUS server. While configuring, the administrator
selected the Include in every user group option.
What will be the impact of using Include in every user group option in a RADIUS configuration?
A. This option places all FortiGate users and groups required to authenticate into the RADIUS server,
which, in this case, is FortiAuthenticator.
B. This option places all users into every RADIUS user group, including groups that are used for the LDAP
server on FortiGate.
C. This option places the RADIUS server, and all users who can authenticate against that server, into
every FortiGate user group.
D. This option places the RADIUS server, and all users who can authenticate against that server, into
every RADIUS group.
Correct Answer: C
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/634373/authentication-servers
QUESTION 47
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard
servers.
18A071942EF52D4BF3A9EA6ABD39648F
Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard
servers for live web filtering?
A. set fortiguard-anycast disable
B. set webfilter-force-off disable
C. set webfilter-cache disable
D. set protocol tcp
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48294
QUESTION 48
Which two configuration settings are synchronized when FortiGate devices are in an active-active HA
cluster? (Choose two.)
A. NTP
B. DNS
C. FortiGate hostname
D. FortiGuard web filter cache
Correct Answer: AB
Section:
Explanation
Explanation/Reference:
QUESTION 49
An administrator wants to configure timeouts for users. Regardless of the user’s behavior, the timer should
start as soon as the user authenticates and expire after the configured value.
Which timeout option should be configured on FortiGate?
A. soft-timeout
B. new-session
C. idle-timeout
D. hard-timeout
E. auth-on-demand
Correct Answer: D
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD37221#:~:text=Hard%20timeout%3A
%20User%20entry%20will,(5%20minutes%20by%20default)
QUESTION 50
Refer to the exhibit showing a debug flow output.
18A071942EF52D4BF3A9EA6ABD39648F
Which two statements about the debug flow output are correct? (Choose two.)
A. The default route is required to receive a reply.
B. A new traffic session is created.
C. A firewall policy allowed the connection.
D. The debug flow is of ICMP traffic.
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.2.3/cookbook/54688/debugging-the-packet-flow
QUESTION 51
Which statement about video filtering on FortiGate is true?
A. Full SSL Inspection is not required.
B. It is available only on a proxy-based firewall policy.
C. It inspects video files hosted on file sharing services.
D. Video filtering FortiGuard categories are based on web filter FortiGuard categories.
Correct Answer: B
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/7.0.0/new-features/190873/video-filtering
QUESTION 52
Which two inspection modes can you use to configure a firewall policy on a profile-based next-generation
firewall (NGFW)? (Choose two.)
A. Full Content inspection
B. Proxy-based inspection
C. Certificate inspection
D. Flow-based inspection
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
QUESTION 53
Which type of logs on FortiGate record information about traffic directly to and from the FortiGate
management IP addresses?
A. System event logs
18A071942EF52D4BF3A9EA6ABD39648F
B. Security logs
C. Forward traffic logs
D. Local traffic logs
Correct Answer: D
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/476970
QUESTION 54
How does FortiGate act when using SSL VPN in web mode?
A. FortiGate acts as an HTTP reverse proxy.
B. FortiGate acts as router.
C. FortiGate acts as DNS server.
D. FortiGate acts as an FDS server.
Correct Answer: A
Section:
Explanation
Explanation/Reference:
Reference: https://pub.kb.fortinet.com/ksmcontent/Fortinet-Public/current/Fortigate_v4.0MR3/fortigate-
sslvpn-40-mr3.pdf
QUESTION 55
Which two statements are correct about NGFW Policy-based mode? (Choose two.)
A. NGFW policy-based mode supports creating applications and web filtering categories directly in a
firewall policy.
B. NGFW policy-based mode can only be applied globally and not on individual VDOMs.
C. NGFW policy-based mode does not require the use of central source NAT policy.
D. NGFW policy-based mode policies support only flow inspection.
Correct Answer: AD
Section:
Explanation
Explanation/Reference:
QUESTION 56
Refer to the exhibits.
The exhibits contain a network diagram, virtual IP, IP pool, and firewall policies configuration.
Exhibit A.
18A071942EF52D4BF3A9EA6ABD39648F
Exhibit B.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
The first firewall policy has NAT enabled using IP Pool.
The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the internet traffic coming from a workstation with the IP
address 10.0.1.10?
A. 10.200.1.100
B. 10.200.1.10
C. 10.200.1.1
D. 10.200.3.1
Correct Answer: C
Section:
Explanation
Explanation/Reference:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD44529
18A071942EF52D4BF3A9EA6ABD39648F
QUESTION 57
Which two statements about antivirus scanning mode are true? (Choose two.)
A. In proxy-based inspection mode, files bigger than the buffer size are scanned.
B. In flow-based inspection mode, files bigger than the buffer size are scanned.
C. In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the
client.
D. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it
to the client.
Correct Answer: CD
Section:
Explanation
Explanation/Reference:
QUESTION 58
Which two statements are true about the FGCP protocol? (Choose two.)
A. Is used to discover FortiGate devices in different HA groups
B. Runs only over the heartbeat links
C. Elects the primary FortiGate device
D. Not used when FortiGate is in Transparent mode
Correct Answer: BC
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/564712/fgcp-fortigate-
clustering-protocol
QUESTION 59
Refer to the web filter raw logs.
18A071942EF52D4BF3A9EA6ABD39648F
Based on the raw logs shown in the exhibit, which statement is correct?
A. The name of the firewall policy is all_users_web.
B. Social networking web filter category is configured with the action set to authenticate.
C. The action on firewall policy ID 1 is set to warning.
D. Access to the social networking web filter category was explicitly blocked to all users.
Correct Answer: B
Section:
Explanation
Explanation/Reference:
QUESTION 60
Refer to the exhibit.
18A071942EF52D4BF3A9EA6ABD39648F
An administrator has configured a performance SLA on FortiGate, which failed to generate any traffic.
Why is FortiGate not sending probes to 4.2.2.2 and 4.2.2.1 servers? (Choose two.)
A. The Detection Mode setting is not set to Passive.
B. Administrator didn’t configure a gateway for the SD-WAN members, or configured gateway is not valid.
C. The configured participants are not SD-WAN members.
D. The Enable probe packets setting is not enabled.
Correct Answer: BD
Section:
Explanation
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortigate/6.4.6/administration-guide/580649/link-health-
monitor
18A071942EF52D4BF3A9EA6ABD39648F
