Data Center Controller

ECC800-Pro
Introduction
Huawei ECC800-Pro is the core component for the smart
module local management system, which is used to connect
DCIM and monitoring components. It is intelligent, flexible in
connection, easy to maintain, and reliable. It can be extended
by PoE bus or equipped with expansion cards, and allows all
intelligent monitoring components to be flexibly laid out so
that it can manage the devices inside and outside the smart
module.

Scenario
➢ Inside the data center room. It is used to access third -
party smart devices outside the module and transparently
transmitted to DCIM.

➢ Modular data center scenario. Used to manage smart

devices within a module.

Features & Value

Efficient Simple Reliable
➢ Supports unlocking through the access ➢ Supports local Wi-Fi hotspots and ➢ Dual power inputs and PoE ring
card, password, and fingerprint. mobile terminal connection. network.

➢ Supports PoE bus networking ➢ Key components auto-registration ➢ Intelligent linkage management and
communication, more efficient. and fast delivery. customization.

➢ Mobile operations and maintenanc e by ➢ SNMP protocol for northbound and ➢ Remote alarm notifications by SMS
the APP. centralized management. and email.

Networking Mode
1 For devices outside the module 2 For POE ring network in the module

ECC800-Pro Data Center Controller ECC800-Pro Data Center Controller

RS485 RS485 AI/DI Expansion

Smart ETH gateway Smart ETH gateway
module

AI/DI RS485

Generator Smart Sensor Temperature PDU Sensor Access Skylight UPS Precision Air
set Meter actuator actuator conditioner

★ Need NetEco, and development is required when third-

★ For FusIonModule series solutions
party equipment is connected.
Software Functions
Functions Description

Monitor data center infrastructure in real time, such as power equipment, cooling equipment, sensors, etc.
Device Monitoring
Historical data of devices can be queried.

Allows users to edit the layout, device name, and power connection of the smart module online.
View Management The power distribution link and cooling view can be automatically generated.
The layout, power link, and cooling view of the smart module can be synchronized to the NetEco.

Supports alarm browsing, query, masking, redefinition and threshold setting.

Alarm Management Notification methods include SMS and mail.
Provides alarm cause analysis and handling suggestions.

Mobile Access Allows users to view current alarms, PUE, and device parameters on a tablet.

Supports PUE statistics analysis and historical query for smart modules and allows users to customize the PUE calculation
PUE Management
method.

Supports facial recognition, fingerprint recognition, IC card, and password authentication, remote door opening, and
Security
camera management.

Linkage Supports alarm linkage settings, such as automatic rotation of skylights at high temperature.

Hardware Specifications
Item Description

Processor 1*ARM Cortex A7 32bit processor, 0.6 GHz

Memory 512MB ROM，64MB+1GB Flash Memory

Power Supply Supports single or dual inputs，200V AC～240V ，50Hz/60Hz

Provides 2 WAN ports and two LAN ports with a communication rate of 100 Mbit/s. WAN ports support only single-port
FE Port
communication.
Provides a maximum of 4 RS485 ports with a communication rate of 9600 bit/s by default. Ports COM1 to COM3 (2 of which
RS485 Port(RJ45)
also support AI/DI signal access) can provide 12 V DC power with a rated current of 450 mA.

Provides a maximum of 5 AI/DI ports (2 of which also support RS485 signal access). Each port provides 12V DC power with a
AI/DI Port(RJ45)
maximum current of 100mA.

Provides one DO port, which supports both passive and active. In active mode, 12 V DC/450 mA output is provided. The
DO Port(RJ45)
passive (dry contact) contact capacity is 20 W, the maximum input voltage is 60 V DC, and the rated current is 500 mA.

Wireless Supports Wi-Fi AP(Access Point) with a communication range of 30 m. wireless module supports the configuration of the
Communication power supply switch.

Supports short message sending(SMS) and 4G communication(China Unicom and China Mobile full-frequency), it is compatible
4G
with 3G(WCDMA) and 2G(GSM) communication, and provides a standard SIM card slot.

Operating T&H -20℃~ +50℃, 5% ~ 95%RH

Dimension
442mm*330mm*43.6mm
(Length*Width*Height)

Certification RoHS5, REACH, WEEE

Optional Accessories
Expansion module Smart ETH

Panel Diagram

Provides 8 RS485/AID ports, each port provides 12V DC Provides 2 FE cascading ports with a communication rate of
power. Every two ports form a group and provide 12V 10/100 Mbit/s for ring networking.
Technical specifications
DC@450 mA power. Provides 1 PoE northbound interface for Provides 4 PoE ports with a communication rate of 10/100
ETH or ECC800-Pro access. Mbit/s for connecting to southbound devices.
Dimension
43mm*120mm*200mm 48mm*130mm*100mm
(Height*Width*Depth)

Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.