Scribd
Upload
13 views4 pages

2020 Dec. ECT205-A

This document is an examination paper for the Third Semester B.Tech Degree in Network Theory from APJ Abdul Kalam Technological University, dated December 2020. It consists of two parts: Part A with 10 short answer questions worth 3 marks each, and Part B with 10 detailed questions from various modules, each worth 14 marks. The questions cover topics such as mesh analysis, Thevenin’s theorem, and transfer functions.

Uploaded by

abhilashabhias112
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views4 pages

2020 Dec. ECT205-A

This document is an examination paper for the Third Semester B.Tech Degree in Network Theory from APJ Abdul Kalam Technological University, dated December 2020. It consists of two parts: Part A with 10 short answer questions worth 3 marks each, and Part B with 10 detailed questions from various modules, each worth 14 marks. The questions cover topics such as mesh analysis, Thevenin’s theorem, and transfer functions.

Uploaded by

abhilashabhias112
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Reg No.

:_______________ Name:__________________________
0800ECT205122002
APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY
Third Semester B.Tech Degree Examination December 2020 (2019 Scheme)

Course Code: ECT205


Course Name: NETWORK THEORY
Max. Marks: 100 Duration: 3 Hours
PART A
Answer all questions. Each question carries 3 marks Marks
1 Explain super mesh analysis (3)
2 Differentiate ideal and practical voltage sources. (3)
3 State Reciprocity theorem (3)
4 What is the significance of Superposition theorem? (3)
5 State initial value and final value theorem (3)
6 Find expression for current when an unit impulse is given to a series RC circuit. (3)
7 Is 𝛼 = a valid function? Justify. (3)

8 What do you mean by open circuit natural frequency and short circuit natural frequency? (3)
9 What are image parameters? (3)
10 The impedance parameters of a two-port network are 6 3 . Find its admittance (3)
3 4
parameters.
PART B
Answer any one full question from each module. Each question carries 14 marks
Module 1
11 a) Find 𝐼 in the network shown using nodal analysis (7)

b) Find voltage across 6Ω resistor using mesh analysis


(7)
0800ECT205122002

12 a) Find voltage across 4Ω resistor using nodal analysis (7)

b) Determine current through 10Ω resistor using mesh analysis

(7)

Module 2
13 a) Find current through 1.6Ω resistor using Thevenin’s Theorem (7)

b) Determine current in (2 + j3 )Ω impedance using superposition theorem


(7)
0800ECT205122002

14 a) Find value of RL for maximum power transfer. Also find the maximum power (7)
transferred.

b) Determine current through 4Ω resistor using superposition theorem.


(7)

Module 3
15 a) In the circuit, the switch is closed at 𝑡 = 0, connecting a source 𝑒 to the RC (8)
circuit. At time 𝑡 = 0 , it is observed that capacitor voltage has the value
𝑉 (0) = 0.5𝑉. For the element values given, determine 𝑉 (𝑡) after converting the
circuit into transformed domain.

b) Determine current flowing through the circuit shown for 𝑡 ≥ 0


(6)

16 a) Find the expression for current through a series RL circuit when a pulse input of (6)
width T and amplitude A is applied across it
b) For the circuit shown switch is closed at t = 0. Find currents 𝑖 (𝑡) 𝑎𝑛𝑑 𝑖 (𝑡) if (8)
initial current through inductor is zero and initial voltage on capacitor is 4V
0800ECT205122002

Module 4
17 a) Obtain the time domain response of the given function using pole zero diagram (8)
( )( )
𝑉(𝑠) =
( )( )

b) Explain the significance of poles and zeros with reference to driving point (6)
functions and transfer functions.
18 a) What are the necessary conditions for transfer function? (6)
b) Determine driving point impedance Z11(s) , transfer impedance Z21(s)and voltage
transfer ratio G21(s) for the network shown (8)

Module 5
19 a) Derive the conditions for reciprocity and symmetry for Z parameters and for (8)
ABCD parameters.
b) Express g parameters in terms of h parameters and T parameters. (6)
20 a) Show that when two 2 port networks are connected in parallel, the resultant Y (6)
matrix is the sum of Y matrices of each individual network.
b) Obtain short circuit admittance parameters of the circuit shown.
(8)

*****

You might also like