ANALYSIS OF RATE

Providing circumferencial Butt welded joints by electrical arc welding to API pipe having following dia. of pipe,wall thickness,welded in requisite numbers of weld runs so as to achieve the minimum
effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of ADVANI Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS 814-
1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
S.No. Description Qty. Rate Unit Amount in INR
1) MATERIALS:-
80.00 mmdia MSERW pipe 1015.4461 109.00 Kg 110683.62
Wall thickness 4.80
Dia of pipe 80.00
heving wall thickness of 4.80 mm Outer dia of pipe 88.90 TOTAL 110683.62
Wt. of pipe 9.9554 Kg/Rmt. Excise duty Exempted 0.00 = (+) 0.00
TOTAL 110683.62
Add C.S.T. @ 0.00 110683.62 = (+) 0.00
Add HP Vat @ 0.00 110683.62 = (+) 0.00
Add Inspection charges @ 0.00 110683.62 = (+) 0.00
Total 110683.62
2) Welding of pipes by special rods conforming to relevant codes
No. of Butt weld joints. 17.00 Nos
No. of Layers 3.00 Nos
Outer diameter of pipe 8.89 1424.37 5.00 / cms 7121.85 B)
Manual / Machanical Handing charges of pipes with Cran,
winch crab, chain pulleys, wire ropes etc. at site of work 110683.62 1.00 % 1106.84
1% cost of pipe i.e. on Rs. 110683.62 Total (B to C) 8228.69 C)
3) Provision Of DPT Test 474.79 4 per cm 1899.16
Total:- 10127.85 D)
Total:- (C+D) 10127.85
Add 10 % C.P.on all amount 10127.85 = (+) 1012.78
Add 5 % OHC.on all amount 10127.85 = (+) 101.28
Cost for 17.00 joints Total 11241.91
Cost per joints 661.29
Add labour cess 1.00 % = 5.96
667.25
Add GST @ 18% 119.03
Total:- 786.28
Say Rs. 786.30