शासकिय औद्योगिक प्रशिक्षण संस्था पुसद

TRADE - COPA Test-DECEMBER-2022

NAME:………………………………………………................ROLL NO:-………………………………..
Marks :100 Time : 1 hrs
ALL QUESTIONS ARE COMPULLSORY .
1) Central Processing Unit is a combination of?
1) Control and Storage 2) Control and output Unit
3) Arithmetic logic and input unit 4) Arithmetic logic and control unit
5) None of the above
2) Which Statement is valid?
1) 1 KB =1025 bytes 2) 1 KB = 1024
3)1 MB =1000 Kilobyte 4)1 KB =1000 bytes
5) None of the above
3) Microprocessors can be used to make
1) Computers 2) Digital system
3) Calculators 4) All of the above
5) None of the above
4. A term associated with the comparison of processing speeds of different computer system is?
1) RFTS 2) MPG
3) MIPS 4) CPS
5) None of the above
5. Which of the following memory medium is not used an main memory system?
1) Magnetic core 2) Semi conductor
3) Magnetic tape 4) Both Semi conductor Magnetic tape
5) None of the above
6. The control unit of microprocessor?
1) Stores data in the memory 2) accept input data from keyboard
3) performs arithmetic logic function 4) All of the above
5) None of the above
7. Which of the following are the two main components of the CPU?
1) Control unit and registers 2) Registers and main memory
3) Control unit an ALU 4) ALU and Bus
5) None of the above
8. Different Component of the motherboard of a PC processor unit are liked together by sets or parallel electrical conducting
lines. What are these lines called?
1) Conductor 2) Buses
3) Connectors 4) Connectivity
5) None of these
9. The ALU of a computer respond of the commands coming from?
1) Primary memory 2) Control section
3) External memory 4) Cache memory
5) None of these
10. Instruction and memory address are represented by?
1) Character code 2) binary code
3) binary word 4) parity bit
5) None of these
11. Time during which a job is processed by the computer is?
1) delay time 2) real time
3) execution time 4) down time
5) None of these
12.The term gigabyte refers to?
1) 1042 bytes 2) 1024 kilobytes
3) 1024 megabytes 4) 1024 gigabytes
5) None of these
13. Which of the following processors use RISC technology?
1) 486 dX 2) Power PC
3) 486 SX 4) 6340
5) None of these
14. The ALU of a computer normally contains a number og high speed storage element called?
1) semi conductor memory 2) registers
3) hard disk 4) magnetic disk
5) None of the above
15. What is the responsibility of the logical unit in the CPU of a computer?
1) To produce result 2) To compare number
3) To control flow of information 4) To do Math’s work
5) None of the above
16. The width of processor’s data path is measured in bits. Which of the following common data paths?
1) 8 bits 2) 12 bits
3) 16v bits 4) 32 bits
5) None of these
17. Which of the following control the machine cycle?
1) Control unit 2) Memory unit
3) Logical unit 4) Arithmetic unit
5) None of the above
18. Which of the following executes the computers commands?
1) Arithmetic unit 2) Logic unit
3) Both 1 and 2 4) Control unit
5) None of the above
19. The machine cycle includes?
1) fetch 2) decode
3) execute 4) store
5) None of these
20. Processor speed is affected by?
1) System memory rate 2) System clock rate
3) System run rate 4) booting rate
5) All of the above
21. Part number, part description and number of parts ordered are examples of?
1) Control 2) Output
3) Processing 4) feedback
5) input
22. The simultaneous process of two or more programs by multiple processors is?
1) Multi programming 2) multi tasking
3) time sharing 4) multi processing
5) None of the above
23. Grouping and processing all of firm’s transactions at one time is called?
1) a database management system 2) butch processing
3) a real time system 4) an online system
5) None of the above
24. What is the function of the Central Processing Unit of computer?
1) Creates invoices 2) Performs calculations and processing
3) Deletes data 4) Corrupts the data
5) None of the above
25) Which Statement is valid?
1) 1 KB =1025 bytes 2) 1 KB = 1024 3)1 MB =1000 Kilobyte 4)1 KB =1000 bytes 5) None of the above
 Answers
1. (4) 2. (1) 3. (4) 4. (3) 5. (3) 6. (3)
7. (3) 8. (2) 9. (2) 10. (2) 11. (3) 12. (3)
13. (2) 14. (2) 15. (2) 16. (1) 17. (1) 18. (3)
19. (5) 20. (2) 21. (4) 22. (1) 23. (3) 24. (2)
 शासकिय औद्योगिक प्रशिक्षण संस्था चिखली
चिखली, ता-चिखली, जि-बुलढाणा - ४४३२०१ (महाराष्ट्र)
TRADE NAME- COPA WELDER

पेपर- १
Test-NOVEMBER-2016
NAME:………………………………………………................ROLL NO:-………………………………..
Marks : 30 Time : 1 hrs
TRADE : COPA
ALL QUESTIONS ARE COMPULLSORY WITH NEGATIVE MARK SYSTEM ¼

SOLVE QUESTION BY MAKING DARK APPROPRIATE CIRCLE

1) Central Processing Unit is a combination of?

2) Control and Storage 2) Control and output Unit
3) Arithmetic logic and input unit 4) Arithmetic logic and control unit
5) None of the above
2) Which Statement is valid?
1) 1 KB =1025 bytes 2) 1 KB = 1024
3)1 MB =1000 Kilobyte 4)1 KB =1000 bytes
5) None of the above
3) Microprocessors can be used to make
1) Computers 2) Digital system
3) Calculators 4) All of the above
5) None of the above
4. A term associated with the comparison of processing speeds of different computer system is?
1) RFTS 2) MPG
3) MIPS 4) CPS
5) None of the above
5. Which of the following memory medium is not used an main memory system?
1) Magnetic core 2) Semi conductor
3) Magnetic tape 4) Both Semi conductor Magnetic tape
5) None of the above
6. The control unit of microprocessor?
1) Stores data in the memory 2) accept input data from keyboard
 3) performs arithmetic logic function 4) All of the above
5) None of the above
7. Which of the following are the two main components of the CPU?
1) Control unit and registers 2) Registers and main memory
3) Control unit an ALU 4) ALU and Bus
5) None of the above

8. Different Component of the motherboard of a PC processor unit are liked together by sets or parallel electrical
conducting lines. What are these lines called?
1) Conductor 2) Buses
3) Connectors 4) Connectivity
5) None of these
9. The ALU of a computer respond of the commands coming from?
1) Primary memory 2) Control section
3) External memory 4) Cache memory
5) None of these

10. Instruction and memory address are represented by?

1) Character code 2) binary code
3) binary word 4) parity bit
5) None of these
11. Time during which a job is processed by the computer is?
1) delay time 2) real time
3) execution time 4) down time
5) None of these
12.The term gigabyte refers to?
1) 1042 bytes 2) 1024 kilobytes
3) 1024 megabytes 4) 1024 gigabytes
5) None of these
13. Which of the following processors use RISC technology?
1) 486 dX 2) Power PC
3) 486 SX 4) 6340
5) None of these
14. The ALU of a computer normally contains a number og high speed storage element called?
1) semi conductor memory 2) registers
3) hard disk 4) magnetic disk
5) None of the above
15. What is the responsibility of the logical unit in the CPU of a computer?
1) To produce result 2) To compare number
3) To control flow of information 4) To do Math’s work
5) None of the above
16. The width of processor’s data path is measured in bits. Which of the following common data paths?
1) 8 bits 2) 12 bits
3) 16v bits 4) 32 bits
5) None of these
17. Which of the following control the machine cycle?
1) Control unit 2) Memory unit
3) Logical unit 4) Arithmetic unit
5) None of the above
18. Which of the following executes the computers commands?
1) Arithmetic unit 2) Logic unit
3) Both 1 and 2 4) Control unit
5) None of the above
19. The machine cycle includes?
1) fetch 2) decode
3) execute 4) store
5) None of these
20. Processor speed is affected by?
1) System memory rate 2) System clock rate
3) System run rate 4) booting rate
5) All of the above
21. Part number, part description and number of parts ordered are examples of?
1) Control 2) Output
3) Processing 4) feedback
5) input
22. The simultaneous process of two or more programs by multiple processors is?
1) Multi programming 2) multi tasking
3) time sharing 4) multi processing
5) None of the above
23. Grouping and processing all of firm’s transactions at one time is called?
1) a database management system 2) butch processing
3) a real time system 4) an online system
5) None of the above
24. What is the function of the Central Processing Unit of computer?
1) Creates invoices 2) Performs calculations and processing
3) Deletes data 4) Corrupts the data
5) None of the above