Scribd
Upload
9 views

rc642_cs_r4_hires

The RC642 Room Controller by Automated Logic offers advanced control for various HVAC equipment with features like local setpoint adjustment, scheduling, and override capabilities. It supports BACnet communication, has a high-contrast LCD, and allows for easy networking with additional sensors. The device is designed for easy installation and maintenance, featuring a robust microprocessor and battery-backed memory for reliable operation.

Uploaded by

bubahaa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

rc642_cs_r4_hires

The RC642 Room Controller by Automated Logic offers advanced control for various HVAC equipment with features like local setpoint adjustment, scheduling, and override capabilities. It supports BACnet communication, has a high-contrast LCD, and allows for easy networking with additional sensors. The device is designed for easy installation and maintenance, featuring a robust microprocessor and battery-backed memory for reliable operation.

Uploaded by

bubahaa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RC642/RC642D

Room Controller

RC642D

RC642

Automated Logic’s RC642 Room Controller provides unprecedented power and flexibility to control a variety of
packaged HV-ac equipment. Attractively packaged, the RC642 mounts directly on interior walls and provides local
setpoint adjustment, schedule and override capabilities. The Room Controller has a large high contrast LCD and
easy-to-use occupant controls. Additional remote RS sensors can easily be networked to the Room Controller for
large spaces.

Key Features and Benefits


• Attractive, low profile enclosure in a neutral color complements any space.
• Powerful zone controller for Fan Coil Unit, Heat Pump, Unit Ventilator, small Roof Top Units and similar
applications.
• Standalone or networked using native BACnet communications over a high speed ARCNET 156 Kbps or
BACnet MS/TP network.
• Precise built-in 10K Ohm thermistor with +0.36 F (0.2 C) standard accuracy and less than 0.18 F (0.01 C)
drift over a ten year span – requires no maintenance or re-calibration.
• Large easy-to-read high contrast LCD displays zone temperature, outside air temperature, heating and
cooling setpoints, time, schedule and local override.
• Uses a high speed 16-bit microprocessor with 1 Mbyte Flash and 512 Kbyte of RAM for unparalleled
performance and flexibility – firmware upgrades are ‘flashed-in’ remotely.
• The RC642 Room Controller is part of a full line of zone controllers which include Universal Inputs, relay
driven Binary Outputs and 0-10V-dc Analog Outputs.
• Battery backed real-time clock for standalone operation and local storage of trend data.
• Rnet port supports Automated Logic’s complimentary line of RS room sensors and provides local access to
the system.
• Built-in control algorithms can easily be selected by DIP switches.
• Custom programmed sequences of operation using Automated Logic’s
powerful graphical programming tool, EIKON®-LogicBuilder.
• Mounts on standard electrical boxes for easy installation. 1150 Roberts Boulevard
Kennesaw, Georgia 30144
770/429-3000
Fax 770/429-3001
www.automatedlogic.com
RC642/RC642D
Specifications

BACnet® Support: Conforms to the Advanced Application Controller (B-AAC) Standard Device Profile as defined in
ANSI-ASHRAE Standard 135-2004 (BACnet) Annex L. Tested to Protocol Revision 9
Communication: The following ports are available on the RC642 module: EIA-485 port for ARCNET 156 Kbps or MS/TP (9600
bps – 76.8 Kbps). Local access port for system start-up and troubleshooting.
RC642D Rnet port: Supports up to four RS sensors for averaging or high/low.
RC642 Rnet port: Supports up to four RS sensors and one RS Pro sensor for averaging or high/low.
Digital Outputs: Six digital outputs, relay contact rated at 1A max @ 24V-ac, configured normally open.
Universal Inputs: Four universal inputs with 10 bit A/D resolution. Two are configurable for dry contact or thermistor; and two
for either dry contact, thermistor or 0-5 V-dc.
Analog Outputs: Two analog outputs, 0-10V-dc with 8-bit resolution, 10mA maximum.
Microprocessor: High speed 16-bit microprocessor with ARCNET communication co-processor.
Memory: 512 Kbyte non-volatile battery-backed RAM, 1 MByte Flash memory, 16-bit memory bus.
Battery: 7 year Lithium BR325 battery provides minimum 10,000 hours of data retention during power outage.
Status Indicators: LED status indicators for EIA-485 communication, running, error and power.
Module Addressing: Rotary dip switches for intuitive network addressing of modules.
Protection: Built in surge and transient protection circuitry for power, communications and I/O.
Listed by: UL916 (Canadian Std C22.2 No. 205-M1983), CE, FCC Part 15 – Subpart B – Class A, CE EN50082-1997
Environmental Operating Range: 0ºF to 130ºF (-17.8ºC to 54.4ºC); 10 -90% relative humidity, non-condensing.
Power Requirements: 24V-ac ± 10%, 26V-dc (25 V min, 30 V max), 50-60Hz, 12VA
Physical: Plastic enclosure, removable screw-type terminal blocks.
Weight: 10.6 oz. (.03 Kg)
Dimensions:

Overall Mounting
Width: 6.8 inches (17.3 cm) 2 inches x 4 inches electrical box U.S.
Height: 4.3 inches (10.9 cm) 4 inches x 4 inches electrical box U.S.
Depth: 1.3 inches (3.3 cm) 35mm BS4662 single gang electrical box
RC642
Automated Logic Corporation . 1150 Roberts Boulevard . Kennesaw, Georgia 30144 . 770/429-3000 . Fax 770/429-3001 . www.automatedlogic.com
© United Technologies Corporation 2013. All rights reserved. Copyright Policy
BACnet is a registered trademark of ASHRAE. All other trademarks are the property of their respective owners. Specifications are subject to change without prior notice.
Automated Logic is a part of UTC Climate, Controls & Security, a unit of United Technologies Corp
Made in the USA RC642_CS_r4

You might also like