Xitanium
LED driver
Datasheet
Xitanium FULL Prog LED Xtreme drivers
Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
9290 028 52206
Xitanium FULL Prog LED Xtreme drivers
Philips Xitanium Full Programmable LED drivers are specifically designed to deliver the highest performance, protection and configurability.
The portfolio offers both central and standalone dimming protocols further increasing the energy savings and CO2 reductions achieved with
LED lighting. The Xtreme technology ensures maximum robustness and protection combined with a very long lifetime.
In this product family Philips introduces new drivers in a compact form factor with state-of-the-art features, which offer high value for both
OEM customers and end-users. The products can replace the existing programmable outdoor LED drivers and will bring significant
improvement in programming, assembly into a luminaire and electrical performance.
Benefits Features Application
• Ultimate robustness, offering peace of mind and lower • High surge protection (CM/DM) • Road and street lighting
maintenance costs • Long lifetime and robust protection against moisture, vibration and temperature • Area lighting
• Fully programmable LED-drivers designed for the new • Configurable operating windows (AOC) • Tunnel lighting
digital and connected lighting world • Multiple control interfaces: DALI, AmpDim, 1-step and 3-step LineSwitch • Industrial lighting
• Extended diagnostics via MultiOne • Autonomous dimming via integrated DynaDimmer
• Easy to design-in, configure and install for Class I and • Adjustable thermal protection for driver (DTL) and LED module (MTP)
Class II applications • Constant Light Output (CLO)
• Energy savings through high efficiency and via multiple • Adjustable Start-up Time (AST)
dimming options • Adjustable Light Output (ALO)
• End-Of-Life indicator (EOL)
• Communication through mains via coded commands
• Compliant per DALI Part 251/252/253 (select models)
June 2021
Electrical input data
Specification item Value Unit Condition
Rated input voltage range 202...254 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 47...63 Hz Performance range
Rated input current 1.03 A @ rated output power @ rated input voltage
Max. input current 1.2 A @ rated output power @ minimum performance input voltage
Rated input power 240 W @ rated output power @ rated input voltage
Efficiency 93.5 % @ rated output power @ rated input voltage @ max. Uout
Rated input voltage DC range 186...250 Vdc Performance range
Rated input current DC range 0.81 Adc Performance range
Input voltage AC range 80...264 Vac Safety operational range
Input frequency AC range 45...66 Hz Safety operational range
Input voltage DC range 168...275 Vdc Safety operational range
Standby Power 0.45 W
Isolation input to output Double
Electrical output data
Specification item Value Unit Condition
Regulation method Constant Current
Output voltage 125...350 Vdc
Output voltage max. 430 V Maximum voltage at open load
Output current 0.07...1.05 A
Output current min programmable 200 mA
Output current min dimming 70 mA
Output current tolerance ± 3 %
Output current ripple LF ≤4 % Ripple = peak / average @ < 3kHz
Output current ripple HF ≤4 %
Output PstLM ≤ 0.05 In entire operating window
Output SVM ≤ 0.07 In entire operating window
Output power 8.8...220 W
Electrical data controls input
Specification item Value Unit Condition
Control method AmpDim, DALI, Dynadimmer, Output current amplitude dimming. Please refer to design-in
guide at www.philips.com/oem for more controllability details.
LineSwitch 3-step, LineSwitch
single-step
Dimming range 10...100 % For latest DALI certification status please visit
www.digitalilluminationinterface.org/products
LineSwitch: Vlow: < 160Vac Vhigh: 170 ... 264Vac
Isolation controls input to output Double acc. IEC61347-1
2/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
Wiring and Connections
Specification item Value Unit Type
Input wire cross-section 0.5...1.5 / 20...16 mm2 / AWG solid / stranded wire
Input wire strip length 8.5...9.5 mm
Output wire cross-section 0.5...1.5 / 20...16 mm2 / AWG solid / stranded wire
Output wire strip length 8.5...9.5 mm
Control wire cross-section 0.5...1.5 / 20...16 mm2 / AWG solid / stranded wire
Control wire strip length 8.5...9.5 mm
Maximum cable length 2.5 m CISPR15: between driver and LED module
Maximum NTC output cable length 0.6 m
Insulation
Insulation per IEC61347-1 Mains + LineSwitch EQUI LED + NTC DALI
Mains + LineSwitch Reinforced Reinforced Reinforced
EQUI Reinforced Basic Reinforced
LED + NTC Reinforced Basic Reinforced
DALI Reinforced Reinforced Reinforced
3/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
Dimensions and weight
Specification item Value Unit Tolerance (mm)
Length (A1) 170 mm
Mounting hole distance (A2) 160 mm
Width (B1) 100 mm
Width (B2) 90 mm
Height (C1) 40 mm
Mounting hole diameter (D1) 4.2 mm
Weight 975 gram
Logistical data
Specification item Value
Product name Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
EOC 871951430138200
Logistic code 12NC 9290 028 52206
EAN1 (GTIN) 8719514301382
EAN3 (box) 8719514301399
Pieces per box 9
Operational temperatures and humidity
Specification item Value Unit Condition
Ambient temperature -40...+55 ºC Higher ambient temperature allowed as long as Tcase-max is not
exceeded
Tcase-max 90 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Maximum housing temperature 120 ºC In case of a failure, inherent by design
Relative humidity 10...90 % Non-condensing
4/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
Lifetime
Specification item Value Unit Condition
Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum
failures = 10%
Storage temperature and humidity
Specification item Value Unit Condition
Ambient temperature -40...+85 ºC
Relative humidity 5...95 % Non-condensing
Programmable features
Specification item Available Default setting Condition
Set Adjustable Output Current (AOC) Programmable, SimpleSet 700 mA
LED Module Temperature Protection (MTP) Yes OFF
Driver Temperature Limit (DTL) Yes ON
Adjustable Light Output (ALO) Yes OFF
Constant Light Output (CLO) Yes OFF
Adjustable Start-up Time (AST) Yes 1s
Integrated Dynadimmer Yes OFF 5-step, light turn-off possible
LineSwitch single-step Yes ON
LineSwitch 3-step Yes OFF
AmpDim Yes OFF
Min Dim Level Yes 10 %
DC emergency (DCemDim) Yes ON Default: AOC = 15%. EOFx = 10 ... 60%. No external DC rated fuse
required. Internal fuse rating: T6.3A 250VAC/DC.
End Of Life indicator (EOL) Yes OFF
Coded Mains Yes OFF
OEM Write Protection (OWP) Yes OFF
Luminaire Info (DALI part 251) Yes —
5/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
Features
Specification item Value Condition
Open load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Overpower protection Yes Automatic recovering
Hot wiring No
Suitable for fixtures with protection class I and II per IEC60598
Overtemperature protection Yes Automatic recovering
Energy metering (DALI part 252) Yes Accuracy = 10%
Diagnostics (DALI part 253) Yes
Inrush Limiter type SoftStart
Inrush current
Specification item Value Unit Condition
Inrush current Ipeak 11.5 A Input voltage 230V
Inrush current Twidth 1320 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 10 pcs Indicative value
MCB type Rating Relative number of drivers (based on inrush) MCB Rating Number of drivers (based on rated output power)
B 10A 6 C 10A 6
B 13A 8 C 13A 8
B 16A 10 C 16A 10
B 20A 12 C 20A 13
B 25A 15 C 25A 16
C 10A 10 D 10A 6
C 13A 13 D 13A 8
C 16A 17 D 16A 10
C 20A 20 D 20A 13
C 25A 26 D 25A 16
Fusing information:
This driver is equipped with a SoftStart inrush current limiter. As a consequence, the limit on the number of drivers connected to an MCB/melting fuse is based on either the aggregate inrush
current or the steady-state input current and defined by whatever limit is reached first.
Driver touch current / protective conductor current
Specification item Value Unit Condition
Typical Touch Current (ins. Class II) 0.28 mA peak Acc. IEC61347-1. LED module contribution not included
Typical Protective Conductor Current (ins. Class I) 0.2 mA rms Acc. IEC60598-1. LED module contribution not included
Surge immunity
Specification item Value Unit Condition
Mains surge immunity (diff. mode) 6 kV L-N, Ls-L, Ls-N, acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 10 kV L/N/Ls - EQUI 10kV acc. EN61547; 8kV acc. IEC61000-4-5, 12 Ohm
1.2/50us,8/20us
Control surge immunity (diff. mode) 1 kV DALI - DALI, acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 6 kV DALI - EQUI acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 8 kV DALI - L/N/Ls acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
6/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
Application Info
Specification item Value
Approval marks CCC / CE / DALI 2 / Double-insulated Built-in / EAC / EL / ENEC / UA / WEEE
Ingress Protection classification (IP) 20
Application Outdoor
Mounting Type Built-in
Graphs
Operating window
Thermal Guard
7/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
Mains Guard
Power factor versus output power
Efficiency versus output power
8/9 Xi FP 220W 0.2-1.0A SNLDAE 230V C170 sXt
THD versus output power
©2021 Signify Holding, IBRS 10461, 5600 VB, NL. All rights reserved.
UK importer address: Signify Commercial UK Limited, 3, Guildford Business Park, GU2 8XG.
The information provided herein is subject to change without notice. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document
is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their
respective owners.
Date of release: June 16, 2021 v2
www.philips.com/oem
