Scribd
Upload
4 views

am312PyroelectricInfraredSensor

The AM312 is a digital intelligent passive infrared sensor designed for various applications including motion detection and security systems. It features digital signal processing, temperature compensation, and built-in filters to minimize interference. The manual provides detailed technical specifications, working conditions, and guidelines for optimal installation and usage.

Uploaded by

ennio
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

am312PyroelectricInfraredSensor

The AM312 is a digital intelligent passive infrared sensor designed for various applications including motion detection and security systems. It features digital signal processing, temperature compensation, and built-in filters to minimize interference. The manual provides detailed technical specifications, working conditions, and guidelines for optimal installation and usage.

Uploaded by

ennio
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

SENSOR MANUAL

Pyroelectric Infrared
Radial Sensor

TYPE: AM312
NANYANG SENBA OPTICAL AND ELECTRONIC CO.，LTD.

_________________________________________________________________________
Page 1 of 6 www.nysenba.com
SENSOR MANUAL

Digital Intelligent Passive Infrared Sensor AM312


AM312 is a new digital intelligent PIR sensor. This Smart digital detector
offers a complete motion detector solution,with all electronic circuitry built into
the detector housing. Only a power supply and power-switching components
need to be added to make the entire motion switch.

 Features and Benefits

 Digital signal processing（DSP）


 Two-way differential high impedance sensor input and temperature
compensation
 Built-in filter, screen the interference by other frequency
 Schmidt REL output

 Applications
USB Alarms, PIR motion detection, Intruder detection, Occupancy
detection,
Motion sensor lights, Network camera, Car-security system etc.

 Dimension

Page 2 of 6 www.nysenba.com
SENSOR MANUAL

 Technical Data

1. Maximum Ratings
Min. Max.
Characteristics Symbol Unit Remarks
Value Value
Supply Voltage VDD -0.3 3.6 V
Working
TST -20 85 ℃
Temperature
Current into any pin Into -100 100 mA

Storage Temperature TST -40 125 ℃

2.Working Conditions (T=25°C, Vdd=3V，Except other requirements)


Characteristics Symbol Min. Type Max. Unit Remarks
Supply Voltage VDD 2.7 3 3.3 V
Working Current IDD 12 15 20 μA

Sensitivity
Vsens 120 μV Non-adjustable
Threshold Value

Output REL
Output Low Current IOL 10 mA VOL<1V
Output High Current IOH -10 mA VOH>(VDD-1V)
REL Low Level Output
TOL 2.3 s Non-adjustable
Blockade Time
REL High Level Output
TOH 2.3 s
Delay Time
Oscillator & Filter
Low pass filter cut-off
7 Hz
frequency
High pass filter cut-off
0.44 Hz
frequency
Oscillator frequency on Chip FCLK 64 kHz

Interior Block Diagram

Page 3 of 6 www.nysenba.com
SENSOR MANUAL

 Typical Application

Notes：This is only reference circuit for PIR Sensor AM312.

 Spectral Response of Window Materials

Page 4 of 6 www.nysenba.com
SENSOR MANUAL

Notice:
The typical average transmissivity curve of 5.5μm pass IR filter is figured,
which is vacuumed on silicon filter.

 View of Field

Page 5 of 6 www.nysenba.com
SENSOR MANUAL

X-Y sectional view


Y detecting zone

Notes：1.X-Y sectional view represent the detecting


area。
X 2.Objects with temperature difference can be
Detected in the vertical level.

12m 9 6 3 3 6 9 12m

 Directions for Use


●Pay attention to the mounting direction of the sensor’s element and the size of element
ichnography. Combining with focus of Fresnel lens can achieve a optimal optics design.
●The ex-factory parameter of sensor is gained by testing in the condition of standard
Black Body and the relevant circuit after one minute steadying-time.
●The detecting distance of sensor is a multidimensional function, consisting of ambient
temperature, temperature of moving target , target distance of Fresnel Lens’, ambient
humidity , amplifier gain and comparison voltage.
●The welding shall be made at 4mm above as per the recommendation for lead wire of
sensor seat, and the welding should be completed in the shortest possible time.
●Do not touch the window by hand and the hard things directly.
●Strong shake and static should be avoided.
●100pcs per small package ,3000pcs per large package.

Page 6 of 6 www.nysenba.com

You might also like