Scribd
Upload
24 views3 pages

Tut 11

This document is a tutorial for a Strength of Materials course, providing questions and answers related to beam deflection, bending stress, and material properties. It includes calculations for maximum slope, deflection, bending stress, and mass of a diver based on given parameters. The tutorial references R.C. Hibbeler's Mechanics of Materials and is intended for students in the Department of Civil Engineering.

Uploaded by

unathimaxaulane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views3 pages

Tut 11

This document is a tutorial for a Strength of Materials course, providing questions and answers related to beam deflection, bending stress, and material properties. It includes calculations for maximum slope, deflection, bending stress, and mass of a diver based on given parameters. The tutorial references R.C. Hibbeler's Mechanics of Materials and is intended for students in the Department of Civil Engineering.

Uploaded by

unathimaxaulane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Department of Civil Engineering / Departement Siviele Ingenieurswese

Strength of Materials 143 / Sterkteleer 143


Tutorial 11 / Tutoriaal 11
2024

Instruction: Complete the following questions during the tutorial session!


Opdrag: Voltooi die volgende vrae gedurende die tutoriaal!

Reference: R.C. Hibbeler, Mechanics of Materials, 11th Edition (SI), Prentice Hall
Question 1 / Vraag 1 Answer / Antwoord
Determine the maximum slope and deflection of the beam. EI is constant.
−𝑴𝟎 𝑳
𝜽𝒎𝒂𝒙 =
Bereken die maksimum helling en defleksie van die balk. EI is konstant. 𝑬𝑰

−𝑴𝟎 𝑳𝟐
𝒗𝒎𝒂𝒙 =
𝟐𝑬𝑰

Question 2 / Vraag 2 Answer / Antwoord


The board weaves between the three smooth fixed posts. If the posts remain
along the same line, determine the maximum bending stress in the board. 𝜎𝑚𝑎𝑥
The board has a width of 150 mm and a thickness of 12 mm. E = 12 GPa. = 11.25 𝑀𝑃𝑎
Assume the displacement of each end of the board relative to the centre is
75 mm.

Die bord weef tussen drie gladde vaste pale. As die pale langs dieselfde lyn
bly, bepaal die maksimum buigspanning in die bord. Die bord het `n breedte
van 150 mm en `n dikte van 12 mm. E = 12 Gpa. Neem aan dat die verplasing
van A en C relatief tot die middel is 75 mm.

Page 1 of 3
Question 3/ Vraag 3 Answer / Antwoord

Determine the maximum deflection of the solid circular shaft. E = 200 GPa, 𝒗𝒎𝒂𝒙
d = 100 mm.
= −𝟏𝟏. 𝟓𝒎𝒎
Bereken die maksimum defleksie van die soliede sirkelvormige as.
E = 200 GPa, d = 100 mm.

Question 4 / Vraag 4 Answer / Antwoord


When the diver stands at end C of the diving board, it deflects downward 87.5
mm. Determine the mass of the diver. E = 10 GPa. 𝒎 = 𝟒𝟕. 𝟖 𝒌𝒈

As die duiker by punt C van die duikplank staan, verplaas dit 87.5 mm
afwaarts. Bepaal die massa van die duiker. E = 10 GPa.

Page 2 of 3
Question 5 / Vraag 5 Answer / Antwoord

Determine the slope at the pinned support, as well as the maximum


𝜽𝒙=𝟎𝒎
deflection of the beam. E = 200 GPa, I = 45 × 106 mm. = 𝟐. 𝟐𝟐 ∗ 𝟏𝟎−𝟒 𝒓𝒂𝒅
𝒗𝒎𝒂𝒙 = −𝟐. 𝟐𝟐𝟒𝒎𝒎

Bereken die helling by die skarnier konneksie, sowel as die maksimum


defleksie van die balk. E = 200 GPa, I = 45 × 106 mm.

Question 6 / Vraag 6 Answer / Antwoord

𝒗𝒙=𝟒𝒎 = 𝟗. 𝟒𝟒𝟒𝒎𝒎
The cantilever beam is subjected to an external moment and a distributed
load as indicated. Determine the deflection of end C. E = 200 GPa,
I = 30 × 106 mm.

Die kantelbalk word aan `n eksterne moment en verspreide las blootgestel.


Bepaal die defleksie by punt C. E = 200 GPa, I = 30 × 106 mm.

Page 3 of 3

You might also like