Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
Features
• High PD sensitivity for red light
• High speed up to 16 Mbps
• Low power consumption and current dissipation
•+3~+5V power source
Descriptions
The light receiving unit is a standard-package product with connector and opto-electric
component packaged with PD and I/V amplifier IC. The function of unit changes the light signal
into electric signal.
The unit is operated at +3~+5V and the input signal is TTL compatible. The DLR1170 has
a maximum operating speed of 16 Mbps.
Applications
• Audio equipment
• Digital optical data link
• MD
• Sound card
Device Selection Guide
Chip Operating Dissipation Fiber Coupling Light Output
IC LED Voltage Current(mA) (dBm)
Material p(nm) (Vcc) Typ. Min. Typ. Max.
Si 650 2.7~5.5 6.5 -24 - -14.5
1
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
Package Dimensions
Notes: 1.All dimensions are in millimeters.
2.General Tolerance: 0.2mm
Pin Function
1. Vout
2. GND
3. Vcc
Absolute Maximum Ratings( Ta = 25 )
Parameter Symbol Rating Unit
Supply Voltage Vcc 5.5 V
Storage Temperature Tstg -30 to 80
Operating Temperature Topr -20 to 70
Soldering Temperature Tsol 260*
* Soldering time ≤ 5s / 2 times.
2
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
Electro-Optical Characteristics
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Operating Voltage Vcc - 2.7 - 5.5 V
Peak Detective Wavelength λp - - 650 - nm
Transfer Speed NRZ signal 0.1 - 16 Mbps
Receiving Distance Using APF 0.2 - 20 m
Pulse Width Distortion ∆tw 16Mbps NRZ Signal -20 - 20 ns
Input Light power Pi *1 -24 - -14.5 dBm
Dissipation Current Icc *2 - 6 10 mA
High Level Output Voltage VOH 2.4 - - v
Low Level Output Voltage VoL - - 0.4 v
Rise Time tr *3 - - 25 ns
Fall Time tf *3 - - 25 ns
Low High propagation delay tPLH *3 - - 100 ns
time
High Low propagation delay tPHL *3 - - 100 ns
time
Jitter time ∆tj *3 - 1.5 15 ns
The DLR1170 light receiving unit satisfies EIAJ CP-1201 digital audio interface standard.
3
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
Reliability Test Items
Test Number (n)
No. Item Test Condition Samples
Hour/Cycle Failure (c)
1 Soldering Heat 260 ±5 5 sec./2times 22 n=22, c=0
High temp. &
2 Ta=40 , 90%RH 500 22 n=22, c=0
Hum. storage
High temp.
3 Ta=80 500 22 n=22, c=0
storage
Low Temp.
4 Ta=-30 500 22 n=22, c=0
storage
-30 ~ 80
5 Temp. cycling 20 22 n=22, c=0
(30min) (5min) (30min)
High Temp.
6 Ta=60 , Vcc=5V ON 500 22 n=22, c=0
Operation life
Coupling force < 2 kg
Repeated
7 500 times 0.4kg<Detaching 22 n=22, c=0
operation
force <2kg
Terminal Weight: 500 g
8 22 n=22, c=0
Strength(tension) 30 sec./each terminal
Terminal Weight: 500 g
9 22 n=22, c=0
Strength(bending) 2 times/each terminal
Acceleration: 1000m/s2
Mechanical
10 Pulse width: 6 ms 22 n=22, c=0
Shock
3 times/ X,Y,Z direction
Frequency range: 10~55
Hz /sweep 1 min
11 Vibration 22 n=22, c=0
Overallamplitude:1.5 mm
2H./X,Y,Z direction
Icc (dissipation current): CURRENT ATTENUATE DIFFERENCE < 20%
TPLH (propagation L H delay time): DELAY TIME DIFFERENCE < 20%
TPHL (propagation H L delay time): DELAY TIME DIFFERENCE < 20%
Tr (rise time): TIME DIFFERENCE < 20%
Tf (fall time): TIME DIFFERENCE < 20%
4
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
Measuring Method
*1 Maximum receiver input optical power/Minimum receiver input optical power
*2 Current dissipation measuring method
*3 Pulse response and jitter measuring method
5
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
PCB Layout For Electrical Circuit
Notes:
1. Unit: mm
2. Unspecified tolerance: 0.3mm
3. Substrate Thickness:1.6mm
Precautions for Using Method
1.Connect a by-pass capacitor (0.1uF) close to the DLR1170 within 7 mm of the unit lead frame.
2.Connect a by-pass capacitor(30pF) between GND and Vout avoid loading effect.
3. Take proper electrostatic-discharge (ESD) precautions while handling these devices. These
devices are sensitive to ESD.
receiving module
Vcc GND Vout
+5V C 0.1uF C 30pF
SPDIF IN
6
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
Package
Item Quantity Total Size long*width*high
Tray 1 100 pcs 13.5*27*1.8cm
Inner box 20 tray/box 2000 pcs 29*29*18.5 cm
Outer box 2 inner box/outer box 4000 pcs 60*31*21.8 cm
tray
100 pcs/tray
(13.5*27*1.8cm)
20 tray/box(2000pcs)
(29*29*18.5cm)
ITEM NO.:
QTY.: 4000 PCS
N.W.: KGS
G.W.: KGS
MEAS.:60X31X21.8 CM
2 inner box/outer box (4000pcs)
(60*31*21.8cm)
7
Technical Data Sheet- Light Receiving Unit
DATA LINK : DLR1170
REV DESCRIPTION RELEASE DATE
