Geometry & Trigonometry Test.
Geometry & Trigonometry Test.
40
GEOMETRY & TRIGONOMETRY ASSESSMENT
Answer four questions. At least one question must be chosen from each section.
47o y
z
b) Determine, giving a reason for EACH of your answers, the values of l, m, n and o.
n [4]
o
l m
(i) (ii)
A
2x
35c
25cm 7x
75cm
c) The figure below is a circle with a radius of 70cm. A sector is drawn from the centre, O.
Find the area of the shaded region. [4]
O 70cm
35o
3. a. A ladder of length 1.5m leans against a wall at an angle of 67° to the floor.
How far up the wall does the ladder reach? [2]
b. The ladder slips, as shown in the diagram, so the top of the ladder is 45cm above the ground.
What is the angle between the ladder and the wall? [2]
9cm
x
y
65o
2cm z
b) From the top of a cliff 40 m high, the angle of depression of an object is 34o.
G
(i) Find the length of BD. [2]
E D (ii) Find the angle of elevation of H from B [3]
F C
4 cm
x 1 2 cm
A
y
3 cm
B
5.
(a) Given the following diagrams, not drawn to scale, find the lengths of the sides labelled x. [4]
(i) (ii)
20m
x x
42m
m
55o 82o
45o 35mm
(b) Given the following diagrams, not drawn to scale, find the sizes of the angles labelled θ. [5]
(i) (ii)
θ
59cm
44cm 62m
θ 78o
57cm 56m
R
S
(b) A plane takes off from Airport A on a Bearing of 065°. It flies for 800km and lands at Airport B.
The plane then takes off and flies on a bearing 300° for 1000km and lands at Airport C.
The plane now returns directly to Airport A.