TRAINING INSTITUTE

PAWAN HANS HELICOPTER

MUMBAI
MONTHLY TEST
Code Marks Date
AME Tople
Batch
Semester 1O/11/207
AIR DATA INSTRUMENTS
MSO723

indicators work by meauring more static ports

Ainpeed
difference beteen stati pressure, captured through one ar
The
aicaptured through ptot tub
and dynamic pressure due to "ram ore pitof fube
presture, captured through one or me
2) The ditference between static
captured through a static
and dyamic pressure due to "ram ar
pressure and mas. static pressure
3) The difference between max. pitot

in an Airspeed inie s t
and static pressure in casing of
ut essurea flled within aneroid capsule
airspeed indicator
pressure in aneroid capsule of
Z) Pitot pressure is filled within casing and static
airspeed indicator
3) Aneroid capsule is filled with vacuum and case with static pressure

1 in an Aitimet ssure is flled within aneroid capsule and static pressure in casing of
eed indicator
2) Aneroid capsule is fled with vacuum and case with static pressure
J} Aneroid capsule is filled with static pressure and case with vacuum

4. In an altimeter -
1) The shortest hand indicates altitude in tens of thousands of feet, the intermediate
hand, in thousands of feet; and the langest hand, in hundreds of feet if 20t
increments.
21 The intermediate hand indicates altitude in tens of thousands of feet, the shortest
housands of feet; and the longest hand, in hundreds of feet in 20 ft
3) The shortest hand indicates altitude in thousands of feet, the intermediate hand in
hundreds af feet in 20-ft. increments; and the longest hand in tens of thousands of
feet

5. Which of the following are the types of scales used in an instruments-

ithrmic scale
3) Vertical &horizontal scale
6 In an altimeter hysteresis error i s
1) Affects the accuracy of indications The error is caused by the change of
the static pressure port with the relative wind alignment of
2) This error is induced by the aircraft
maintaining a given
period of time, and then suddenly making a large altitudealtitude for an extended
3) Error is that he scale is not change
correctly oriented to standard pressure conditions
 of
consistelement, mete
speed indicatingunit,sectorgear
indicator
vertical element,metering element
typeof sensingelement, coupling boundaries?
Pneumatic
capsule-typesensing element,
performance
7. measuring
1) Acapsule-type
element, speed
2) A
Detecting positionandhigh
3) stabilizer
setting
for number
8.isused
1) Mach
2) Trueairspeed
3) Calibratedairspeed
4) Altitude
calledas
VSI isalso
The 1) Vinometer
9
2) Radiometer
3) Barometer operate?
4) InstantaneousVSI equipment's
frequency at whichaircraft
the
10. What is
1) 350Hz
2) 450Hz
3) 400Hz
4) 40Hz form of IAS?
ENSU

is the full
11. What
1) Implied airspeed
2) Indicated airspeed
3) Incident airspeed
4) Immediate airspeed

12. TAS shows airspeed in

hour
1) Miles per
2) Knots
3) Nautical miles
per hour position
4) Kilometer
always situated at
13. In VSI O is
1) 3'o clock
2) 9'o clock
3) 12'o clock in
Detecting Element is -- the physical quantity or condition
14. The the value of
actually measuresdisplacements
1) Which condition pre
translational or angular of the physical quantity or the
changes in value quantity transmitted by
2) Which detects measured
the
exhibits the value of scale
3) Which
positions of a pointer or index and a
by the relative master instrument of the cockpit?
major or
15. What is the indicator.
1) Radio magnetic director indicator
attitude
2) Electronic situation indicator
horizontal physical quantity?
3) Electronic value of the
measures the
16. Which element
1) Detecting
2) Measuring
3) Coupling indicator, turn &bankindic
Attitude director indicator, heading
17. instrument?
the following type of
1) Gyroscopic instruments
 3) Engith
2) Flightinstruments pressure
static capsule
pitotand
indicator in
pressure capsule
of
airspeed
case andstatic pressureinpressure
case
18.In Pitotpressurein caseandpitotwithstatic
1) pressurein casearefilled -
2)
Static
capsuleand with
filled
3) Both caseare capsule
capsuleand pressureinpressure
caseof
altimeter
caseand staticwith static
19, In Pitotpressurein caseare filled capsule for
1) capsuleand and
vacuum in
diaphragmis used
case
2) Both pressurein extra
3)
Static indicatorone
airspeed
allowable
maximum center is
1) Airspeedpointer
20. In above
speedpointerdrum horizontally-rotatingdrum
Mach
2) Horizontal rotating
3) indicatorThe
airspeed
allowable
maximum
graduated in--increments
21. In
probe-
diameter
1) 2 knots small
long and
2) 6knots associatedwith at high
speed
(1) & it
could
3) 10 knots difficulties prevent
vibration speed as in
What are the
certain
not be
sufficient to
prevent vibrationat high
necessaryfor
anti-icing
22. may to heatingelements
1)
'Stiffness'
be sufficient the
may not accommodate
2)
'Stiffness'
difficult to
also be correct
3) Only 1 is
1&2 are correct.
ENSURE

4) Neither instruments?
OP
RE gyroscopic
23. What are the different
indicator, TBI
1) ADI, heading
ROM

2) ASI,VSI,ALT
indicator, TBI,VSI
3) ADI,heading
measured in terms of--
Vertical speed in aircraft is
24.
minute
1) Feet per
2) Feet per second
3) km per hour
----
plate in pitot static probe is
25. Function of baffle
dirt and dust particles in pitot static p
1) To prevent entry of dust particles as in (1) & fod's
dirt and
2) To prevent entry of
dirt and dust particles
3) To give passage to the
diameter
difficulties associated with long and small
26. What are the certain sufficient to prevent vibration at
high speed
1) 'Stiffness' may not be sufficient to prevent vibration athigh speedas i
not be
2) 'Stiffness' mayaccommodate heatingelements necessary for ant
the
be difficult to
3) Only 1 is correct
4) Neither 1&2 are correct.
 instruments?
gyroscopic 'in
normally
different
Whatare
the indicator,TBI toits
27. ADLheading rotated variable
) ASLVSLALT indicator,TBL,VSI
2)
heading indicator is establishinga
3) ADL
ofthe
the knob thereby variable
indicator, When through 45 establishing&a
director positioned
attitude thereby
n
28 position symbol maybe t6, variabi
aircraft through establishinga
) The
piteh trim reference. positioned thereby
aircraftsymbol maybe through t10,
The trim reference.
2) pitch positioned become
ciogged?
symbolmay be vents
The aircraft
pitch trim reference. inoperative if the static
3) become
instrument(s)will
29 Which
1) Airspeed indicator
and altimeter indicator
indicator speed
2) Airspeed altimeter, vertical
Airspeed,
3)
airspeed indicator represent?
an
the red line on
30. Whatdoes rough air speed
1) Turbulent or
2) Maneuvering speed
speed
3) Never exceed
10 marks
each carries
(attempt any 2)
SUBJECTIVE QUESTIONS--
elements of instruments
1) Explain four basic principle Airspeed indicator in detail.
2) Explain working principle of of
3) Explain working principle three pointer altimeter in detail. detail
Explain working principle of pneumatic type of vertical speed indicator in
)