Made in France

since 1964

PLASMA cutting and

gouging systems
07/2021
 Plasma cutting is one of the most
widely used processes in metallurgy
and manufacturing. Its cutting speed
and precision often give it the edge
over flame cutting.

PLASMA TECHNOLOGY OXYCUTTING technology FOUR CUTTING

Plasma cutting is a localised, fusion-cutting process in The equipment is simple and the user can be up and
ADVANTAGES
which the compressed jet of air pushes the metal to a running quickly. However, this process is rather slow
melting temperature. and only suitable for cutting carbon steel. Oxy-gas is
GYS systems are portable and easy to use, with even not effective on other types of metal such as stainless
steel or aluminium. What’s more, the workpiece must
higher cutting speeds than flame cutting. Due to its
be preheated before cutting, which further reduces
versatility, plasma technology offers the possibility of productivity. Safety concerns arise from the use of
cutting a wide variety of conductive materials up to a acetylene, which is highly flammable and unstable (this
thickness of 57 mm. combustible gas is most commonly used with flame
cutting).
Main uses and applications:
Cutting quality
• Cuts a variety of conductive materials including mild
steel, carbon steel, stainless steel, aluminium, copper,
Main uses and applications:
• Cutting steel for manufacturing Plasma cuts produce less slag (burrs). MECHANISED CNC CUTTING
brass and other ferrous materials. or dismantling it.
The term «CNC» refers to «Computer Numerical Control».
• Straight / bevelled cut • Heating parts for bending, straightening, heat
treatment. The torch’s movement is controlled by a computer on the cutting table
• Automated cutting using a computer program.
• Loosening jammed or rusted
• Highly accurate gouging
parts and bolts
• Drilling Three advantages of automated cutting:
• Sheet metal marking
Consistent and reliable performance
Easy to use Increased productivity
No gas to adjust, no flame to control. Optimised cutting quality.

PLASMA CUTTING OXYCUTTING

Conductive metals
Material(s) Carbon steel only
(Steel, Aluminium, Copper, Brass)
Thickness Up to 57 mm Up to 50 cm More information?
Excellent cutting angularity. Good cutting angularity
Cutting quality There’s more information
Small heat-affected area. Large heat-affected area Productivity
in the brochure.
Fast cutting speed
Slow cutting speed. Cuts more parts, faster and with fewer
Productivity (The preheating time increases secondary operations.
on all thicknesses. the cutting time).
Secondary Grinding and removal of surface
operations
Minimal slag oxidation almost always required.
Operating
costs
Inexpensive (£) Very expensive (£££)

Equipment cost Expensive (££) Inexpensive (£)

Portability Yes Yes

Safety
Gouging Yes, very accurate Yes No flammable gas required, uses only
Safety compressed air.

2 www.gys.fr www.gys.fr 3
 GYS PLASMA cutter range
25 A - 125 A

MANUAL CUTTING MANUAL OR MECHANISED CUTTING

EASYCUT 25 CUTTER 25 K CUTTER 35 KF CUTTER 30 FV EASYCUT 40 CUTTER 45 CT CUTTER 70 CT NEOCUT 105 CUTTER 125A TRI NEOCUT 125

Max. output current 25 A 25 A 35 A 30 A 40 A Max. output current 45 A 70 A 105 A 125 A 125 A

110 V 230 V
Mains voltage 230 V - 1 ph 230 V - 1 ph 230 V - 1 ph 110/230 V - 1 ph 230 V - 1 ph Mains voltage 400 V - 3 ph 400 V - 3 ph 400 V - 3 ph 400 V - 3 ph
1 ph 1 ph

Separation 8 8 15 15 20 Separation 15 30 35 40 57 57
Performance de

Performance de
coupe (mm)

coupe (mm)
Recommended Steel 6 6 10 10 15 Recommended Steel 10 25 25 35 40 40

Drilling - - - - - Drilling 5 12 15 20 25 25

Mechanised cutting - - - - - Mechanised cutting

Internal compressor - - - Internal compressor - - - - -

Automatic Automatic
- - - - - - -
air pressure control air pressure control

Marking - - - - - Marking - - -

Gouging - - - - - Gouging - -

Protection rating IP 21 IP 21 IP 21 IP 21 IP 21 Protection rating IP 23 IP 23 IP 23 IP 23 IP 23

Weight (kg) 7.8 17 30 11 8 Weight (kg) 15 22 33 42 36

Part no. with accessories* 065543 030947 031036 013858 029743 Part no. with accessories* 062962 013841 063112 029910 067448
*Power source + earth clamp *Power source + earth clamp
+ hand-held torch + hand-held torch

Glossary Power Factor Correction (PFC) Mechanised cutting

PFC Can be connected to a CNC cutting table.
Discover the technological features of our products as
PFC technology suppresses spikes and regulates the supply current. MMA
The electrical network is therefore better used, accepting supply voltages between 185 and
well as a brief explanation. 265 V and, therefore, favouring the use of extension cords or power supplies. Another im- Internal air compressor
portant effect is that a power source equipped with this device consumes much less energy Eliminates the need for a nearby compressed air source.
MMA
from the grid and allows it to be used on smaller circuit breakers (e.g. 16 A).
AIR Auto AIR
auto Automatic management of air pressure and flow for optimal cutting.
Flexible Voltage
FV This technology extends the supply voltage range of the PFC
from 85 to 265 V (185 to 265 V for a standard PFC). They can therefore be used on 110 V or Open sheet mode
Ideal for cutting work on perforated sheets.
230 V electrical networks. MMA
Protect 400 Marking mode
P400 Power sources equipped with this technology are able to withstand occasional or permanent Ideal for surface marking and part identification.
voltage variations on the electrical network up to 400 V (lightning, engine-driven sets, load
shedding, etc.).
G
Gougeage
Gouging
Removal of metal in an efficient, precise and clean manner.
Anti-Dust
AD In this type of design, the ventilation corridor is isolated from the electronic parts, which
greatly reduces contact with external dust.
4 www.gys.fr www.gys.fr 5
Single-phase Single-phase
25 A and 35 A Internal compressor 30 A CUTTER range

MMA MMA MMA

15 PFC P400
CUTTER 25 K & 35 KF mm 1
PHASE
230
V O LT S
PFC P400 AD CUTTER 30 FV 15
mm 1
PHASE
110
V O LT S
230
V O LT S FV
Built-in air compressor 35 KF 35 KF
Designed for body shops
With a cutting capacity of up to 15 mm, the CUTTER The CUTTER 30 FV is a 30 A plasma cutter with a 10
25 K and 35 KF are manual plasma cutting machines with a built-in mm steel cutting capacity (15 mm in separation).
compressor. In the absence of compressed air, they are the perfect tool Its HF-free priming system extends the life of the consumables. Designed
for any construction site. for maintenance work, such as car bodywork, it has a very robust
mechanism and a simple interface with flow meter.

■ The internal compressor eliminates the need for an external air

compressor and filter. ■ Easy-to-use control panel with a single potentiometer for
■ Non-contact arc ignition to avoid electromagnetic interference. adjusting the cutting intensity.
■ Equipped with a 4 m torch with trigger safety device to prevent ■ Non-contact arc ignition to avoid electromagnetic interference.
accidental or unintentional triggering. ■ Manual air pressure adjustment (2.5 < 9 bar) with front panel
flow meter.
■ Equipped with a 4 m detachable torch equipped with a safety
device on the trigger to prevent accidental or unintentional
triggering.

MMA

MADE IN FRANCE MADE IN FRANCE

Internal compressor

Specifications CUTTER 25 K CUTTER 35 K Options & Accessoires Specifications CUTTER 30 FV Options & Accessories
230 V MT 25K torch consumables kit 039971 TPT 40 torch consumables kit 039957
Power Supply
1 ph, 50/60 Hz 230 V 110 V
MT 35K torch consumables kit 039964 Power Supply Dehumidifier filter 039728
1 ph, 50/60 Hz 1 ph, 50/60 Hz
Fuse 16 A
Compass kit (Ø 10 >134 cm) 040205 PLASMA 600 trolley 040298
Fuse 16 A 32 A
Current range 5-25 A 10-35 A
Current range 10-30 A Manual plasma torch TPT 40 - 4 m - with consumables 060753
Duty cycle @ 60% 12 A / 84.8 V 26 A / 90.4 V
@ 60% 23 A / 89.2 V 19 A / 87.6 V Compass kit (Ø 10 >134 cm) 040205
EN 60974-1 (40°C) @ 100% 11 A / 84.4 V 20 A / 88 V Duty cycle
EN 60974-1 (40°C) @ 100% 20 A / 88 V 15 A / 86 V
Compresseur (niveau sonore) 60 -70 db
Recommended air flow rate 115 L/min
Dimensions L x W x H 22 x 45 x 31 cm 28 x 52 x 46 cm
Recommended air pressure 2.5 > 9 bar
Weight 17 kg 30 kg
Dimensions L x W x H 45 x 28 x 20 cm
Original torch MT 25K (4 m)
Weight 11 kg

Performance Ordering information Original torch TPT 40 (4 m)

Steel 6 mm 10 mm CUTTER 25 K + accessoires

Recommended cut 030947 Performance Ordering information
(Clean cut) Stainless steel TOPARC MT 25K torch, 4 m + 2 m earth cable
4 mm 8 mm
/ Alu CUTTER 35 KF + accessoires Steel 10 mm CUTTER 30 FV & accessories
031036 Recommended cut 013858
Steel 8 mm 15 mm TOPARC MT 35K torch, 4 m + 2 m earth cable Stainless steel TOPARC TPT 40 torch, 4 m + 2 m earth cable
Maximum cut (Clean cut) 8 mm
(Separation) Stainless steel / Alu
6 mm 10 mm
/ Alu Steel 15 mm
Maximum cut
(Separation) Stainless steel
10 mm
/ Alu

6 www.gys.fr www.gys.fr 7
Single-phase Single-phase
25 A and 40 A EASYCUT range 45 A CUTTER CT range

MMA MMA MMA

20 PFC P400
EASYCUT 25 & 40 mm 1
PHASE
230 V O LT S
CUTTER 45 CT 30
mm 1
PHASE
110V O LT S
230
V O LT S FV AD IP23
CNC
Ultra compact Versatile

The ultra-compact EASYCUT 25 and 40 plasma cutters are ideal for easily The professional-quality, multi-purpose CUTTER 45 CT plasma cutter
cutting all types of metal up to 20 mm thick. With a power rating of up to is characterised by its ability to cut metal up to 30 mm thick. The CNC
40 A, they excel at low-current precision cutting. Ideal for the workshop, interface and the automatic, AT-70, industrial torch allow for a fully
they offer true portability without sacrificing cutting performance. mechanised operation.

■ Three working modes: cutting, trigger-lock cutting and cutting

of perforated sheets.
■ Compact and lightweight, they provide excellent mobility. ■ Pre-wired for use on automatic cutting table (optional CNC-1
analogue kit).
■ Easy-to-use control panel with a single potentiometer for
adjusting the cutting intensity. ■ Non-contact arc ignition to avoid electromagnetic interference.
■ Non-contact arc ignition to avoid electromagnetic interference. ■ Manual air pressure adjustment (4.1 < 6.5 bar) with front bar
graph.
■ Manual air pressure adjustment (2.5 < 6.5 bar) with front bar
graph. ■ MT-70 premium torch designed to withstand impact and heat
(optional).
■ Equipped with a 4 m detachable torch with trigger safety device.

MADE IN FRANCE

Specifications EASYCUT 25 EASYCUT 40 Options & Accessoires Specifications CUTTER 45 CT Options & Accessoires
230 V TPT 40 torch consumables kit 039957 MT-70 torch consumables kit 061613
Power Supply 230 V 110 V
1 ph, 50/60 Hz Power Supply
Dehumidifier filter 039728 1 ph, 50/60 Hz 1 ph, 50/60 Hz TPT 40 torch consumables kit 039957
Fuse 16 A 32 A
PLASMA 600 trolley 040298 Fuse 16 A 32 A Dehumidifier filter 039728
Current range 10-25 A 10-40 A
Manual plasma torch TPT 40 - 4 m - with consumables 060753 Current range 10-45 A 10-30 A MT-70 manual plasma torch - 12 m - without consumables 037519
Duty cycle @ 60% 15 A / 86 V 10 A / 84 V
Compass kit (Ø 10 >134 cm) 040205 41 A / 96.4 V 21 A / 88.4 V Automatic AT-70 plasma torch - 6 m - without consumables 037526
EN 60974-1 (40°C) Duty cycle @ 60%
@ 100% 10 A / 84 V -
EN 60974-1 (40°C) @ 100% 32 A / 92.8 V 17 A / 86.8 V Automatic AT-70 plasma torch - 12 m - without consumables 037533
Recommended air flow rate 115 L/min
Recommended air flow rate 115 L/min 185 L/min CNC-1 Analogue Kit for cutting table connection 039988
Recommended air pressure 2.5 > 6.5 bar
Recommended air pressure 5 > 7 bar Cutting / chamfering / torch guidance kit 038653
Dimensions L x W x H 42 x 15 x 30 cm
Dimensions L x W x H 48 x 37 x 23 cm TPT 40 Plasma Torch Compass Kit (Ø 10 >134 cm) 040205
Weight 7.8 kg 8 kg
Weight 15 kg MT-70 Plasma Torch Compass Kit (Ø 40 > 82 cm) 037984
Original torch TPT 40 (4 m)
Original torch MT-70 (6 m) or TPT 40 (4 m)

Performance EASYCUT 25 EASYCUT 40

Ordering information
230 V 110 V Ordering information
EASYCUT 25 + accessoires Performance MT-70 torch
Steel 6 mm 15 mm 065543
Recommended cut TOPARC TPT 40 torch, 4 m + 2 m earth cable
(Clean cut) Stainless steel CUTTER 45 ct + 2 m earth cable 014787
4 mm 10 mm EASYCUT 40 + accessoires Recommended cut Steel 25 mm 10 mm
/ Alu 013858
TOPARC TPT 40 torch, 4 m + 2 m earth cable (Clean cut) Stainless steel / Alu 15 mm 8 mm CUTTER 45 CT pack + accessories
Steel 8 mm 20 mm
Maximum cut TOPARC MT-70 torch, 6 m + consumables kit 062962
(Separation) Stainless steel Maximum cut Steel 30 mm 15 mm + 2 m earth cable
6 mm 15 mm
/ Alu (Separation) Stainless steel / Alu 20 mm 10 mm CUTTER 45 CT & accessoires
013629
Steel 12 mm 5 mm TOPARC TPT 40 torch, 4 m + 2 m earth cable
Drilling
Stainless steel / Alu 6 mm 3 mm
8 www.gys.fr www.gys.fr 9
Three-phase
70 A CUTTER CT range

MMA MMA

CUTTER 70 CT 35
mm 3
PHASES
400
V O LT S
AD IP23 G
Gougeage
CNC
Portable for industry

The professional-quality, three-phase plasma cutter, CUTTER 70 CT, is

capable of cutting metal up to a thickness of 35 mm. The CNC interface
and the automatic, AT-70, industrial torch allow for a fully mechanised
operation.

■ Easy-to-use control panel with a single potentiometer for adjusting

the cutting intensity.
■ Three working modes: Cutting, trigger-lock cutting and cutting of
perforated sheets.
■ Pre-wired for use on automatic cutting table (optional CNC-1
analogue kit).
■ Non-contact arc ignition to avoid electromagnetic interference.
Performance Specifications CUTTER 70 CT
■ Manual air pressure adjustment (4.1 < 6.5 bar) with front bar graph.
Steel 25 mm
■ MT-70 premium torch designed to withstand impact and heat Recommended cut Work mode Cutting Gouging
(optional). (Clean cut) Stainless steel
18 mm 400 V
/ Alu Power Supply
3 ph, 50/60 Hz
Steel 35 mm
Maximum cut Fuse 16 A
(Separation) Stainless steel
25 mm
/ Alu Current range 20-70 A
Steel 15 mm @ 60% 70 A / 108 V 60 A / 124 V
Duty cycle
Drilling Stainless steel
12 mm EN 60974-1 (40°C) @ 100% 55 A / 102 V 45 A / 118 V
/ Alu
MADE IN FRANCE
Gouging Withdrawal rate 4.8 kg/h Recommended air flow rate 270 L/min
Recommended air pressure 5 > 7 bar
Dimensions L x W x H 52 x 40 x 26 cm
Weight 22 kg
Original torch MT-70 (6 m)

Recommended cut Options & Accessoires

MT-70 torch consumables kit 061613
Steel Dehumidifier filter 039728
Pressure indicator
Trolley 039568
MT-70 manual plasma torch - 12 m - without consumables 037519
Automatic AT-70 plasma torch - 6 m - without consumables 037526
25 mm Automatic AT-70 plasma torch - 12 m - without consumables 037533
CNC-1 Analogue Kit for cutting table connection 039988

Aluminum Filter with stainless steel grid (630 µm filtration) 046580

Solid sheet mode Manual air pressure Cutting / chamfering / torch guidance kit 038653
Mesh sheet mode adjustment
Locked solid sheet mode MT-70 Plasma Torch Compass Kit (Ø 40 > 82 cm) 037984

18 mm
Ordering information
CUTTER 70 CT + 4 m earth cable 013636

Current setting CUTTER 70 CT & accessories

013841
TOPARC MT-70 torch, 6 m + 4 m earth cable

10 www.gys.fr www.gys.fr 11
Three-phase
125 A CUTTER TRI range

MMA MMA MMA

CUTTER 125A TRI 57

mm 3
PHASES
400
V O LT S
AD IP23 AIR
auto G
Gougeage
CNC
Maximum productivity

The CUTTER 125 TRI is a three-phase plasma cutter offering up to

125 A of power with a recommended cutting performance of 40 mm
and a maximum cut of 57 mm. Equipped with automatic air pressure
management, it offers optimal cutting quality throughout the life of the
consumables.

■ Automatic airflow and pressure management.

■ Four working modes: cutting, trigger-lock cutting, cutting of
perforated sheets and gouging.
■ Gouging with maximum shrinkage (specific skid and nozzle in
option).
■ Pre-wired for use on automatic cutting table (optional CNC-1 Performance Specifications CUTTER 125A TRI
analogue kit).
Steel 40 mm Work mode Cutting Gouging
■ Quick torch connection/disconnection. Recommended cut
(Clean cut) Stainless steel 400 V
40 mm Power Supply
■ Wide range of consumables for all thicknesses. / Alu 3 ph, 50/60 Hz
Steel 57 mm
■ Non-contact arc ignition to avoid electromagnetic interference. Maximum cut Fuse 50 A
(Separation) Stainless steel
57 mm Current range 25-125 A
MADE IN FRANCE
■ Mobile with the skate cart (optional). / Alu
Steel 25 mm Duty cycle @ 60% - -
■ Intuitive LCD/TFT display offering excellent readability. Drilling Stainless steel EN 60974-1 (40°C) @ 100% 125 A / 130 V 125 A / 150 V
25 mm
/ Alu
Recommended air flow rate 305 L/min
Gouging Withdrawal rate 12 kg/h
Recommended air pressure 5 > 9 bar
Dimensions L x W x H 31 x 71 x 49 cm
Weight 42 kg
Original torch MT-125 (6 m)

Recommended cut Options & Accessoires

Steel Consumables kit 45 / 65 / 85 A MT-125 torch 039537
Air pressure adjustment (ma- 3.5 inch colour display
nual mode) Consumables kit 85 / 105 A MT-125 torch 064720
Consumables kit 105 / 125 A MT-125 torch 039544
Dehumidifier filter 039728
Solid sheet mode
40 mm Skate trolley + bracket 039575
Mesh sheet mode MT-125 manual plasma torch - without consumables 12 m - 039513
Selecting the 6 m - 038479 12 m - 039520
air pressure mode:< Manual or Automatic Gouging mode Automatic AT-125 plasma torch - without consumables
15 m - 069787 20 m - 069794
Locked solid sheet mode
40 mm CNC-1 Analogue Kit for cutting table connection 039988
Filter with stainless steel grid (630 µm filtration) 046580
Cutting / chamfering / torch guidance kit 038653
Aluminum MT-125 plasma torch kit (Ø 40 > 82 cm) 037984

Ordering information
Current setting Selecting the wor- CUTTER 125A TRI + 4 m earth cable 029897
king mode
CUTTER 125A TRI & accessories
029910
TOPARC MT-125 torch, 6 m + 4 m earth cable

12 www.gys.fr www.gys.fr 13
Three-phase
105 A and 125 A NEOCUT range

MMA MMA MMA MMA

NEOCUT 105 & 125 57

mm 3
PHASES
400
V O LT S
AD IP23 AIR
auto G
Gougeage
CNC
State-of-the-art technology

With a high capacity for manual or mechanised cutting, NEOCUTs are the
ideal solution in industrial environments. Its 100% duty cycle up to 125
A enables it to cut parts up to 57 mm thick. Equipped with automatic air
pressure management, they offer optimal cutting quality throughout the
life of the consumables.

■ Automatic management of pressure and air flow according to the set

current.
■ Six working modes: cutting, trigger-lock cutting, gouging, trigger-
lock gouging, cutting of perforated sheets and marking.
■ Marking mode, ideal for tracing and identifying parts. NEOCUT NEOCUT
Performance 105 125 Specifications NEOCUT 105 NEOCUT 125
■ Non-contact arc ignition to avoid electromagnetic interference. Work mode Cutting Gouging Cutting Gouging
■ Pre-wired for use on automatic cutting table (optional analogue/ Steel 35 mm 40 mm Power Supply 400 V - 3 ph, 50/60 Hz
Recommended cut
digital CNC kit). (Clean cut) Stainless steel
30 mm 40 mm Fuse 32 A 63 A
/ Alu
■ Monitored wear and tear of consumables (nozzle and electrode). Steel 50 mm 57 mm Current range 20-105 A 20-125 A
Maximum cut
■ Easy software updates via USB cable with no tools or disassembly (Separation) Stainless steel Duty cycle @ 60% - 105 A / 142 V - -
40 mm 57 mm
required. / Alu EN 60974-1 (40°C) @ 100% 105 A / 122 V 90 A / 136 V 125 A / 130 V 125 A / 150 V
Steel 20 mm 25 mm
■ OLED display and multilingual interface: easy to use, with all settings Drilling
Recommended air flow rate 305 L/min
Stainless steel
at the touch of a button. 18 mm 25 mm Recommended air pressure 5 > 9 bar
/ Alu
Gouging Withdrawal rate 8 kg/h 12 kg/h Dimensions L x W x H 69 x 40 x 61 cm
Weight 33 kg 36 kg
Original torch MT-125 (6 m)

Options & Accessoires

MADE IN FRANCE
Consumables kit 45 / 65 / 85 A MT-125 torch 039537
Consumables kit 85 / 105 A MT-125 torch 064720
Recommended cut
Consumables kit 105 / 125 A MT-125 torch 039544
NEOCUT 125 NEOCUT 105 Dehumidifier filter 039728
Skate trolley + bracket 037717
Reminder of the Pressure measurement Steel
current mode at the product’s inlet MT-125 manual plasma torch - without consumables 12 m - 039513
6 m - 038479 12 m - 039520
Automatic AT-125 plasma torch without consumables
15 m - 069787 20 m - 069794
40 mm 35 mm 6 m - 067479 12 m - 067486
Automatic AT-160 plasma torch without consumables
Arc voltage 15 m - 069800 20 m - 069817
7.3 bar 150V measurement CNC-1 Analogue Kit for cutting table connection 039988
Digital CNC-2 kit for cutting table connections 064737
125A
5.0 bar 125A Current mea-
surement
40 mm 30 mm
CNC-3 Digital Retrofit Kit
Filter with stainless steel grid (630 µm filtration)
Cutting / chamfering / torch guidance kit
068957
046580
038653

Aluminum
Output pressure reminder Ordering information NEOCUT 105 NEOCUT 125

NEOCUT+ 4 m earth cable 063044 067431

Current setpoint NEOCUT + accessories
063112 067448
TOPARC MT-125 torch, 6 m + 4 m earth cable

14 www.gys.fr www.gys.fr 15
Packs Packs

SINGLE-PHASE PACKS TRIPHASE PACKS

8 mm

10 mm Ohmic

Trolley Connec- Torch

Earth cable Manual torch Diffuser Electrode Hose Nozzle tions Earth cable Manual torch CNC kit Skate trolley Diffuser Electrode Hose Nozzle Deflector
040208 051331 Auto
CUTTER 25 K
CUTTER 70 CT
x1 x3 x3 x1 MT-70, 6 m x1 x1 x1 x1 x1
1 013841 037502 Starter kit
029781 2 m, 10 mm² MT-25K, 4 m
MT-70, 6 m x1 x3 x3 x1 x1
2 014589 037502 Consumables kit 037540
4 m, 10 mm²
MT-70, 12 m x1 x3 x3 x1 x1
Consumables kit 039971 3 014596 037519 Consumables kit 037540
AT-70, 12 m Analog x1 x5 x5 x1 (Ohmic) x1
CUTTER 35 KF 4 014619 037533 039988 037557 037564 037588 037618 037649

x1 x3 x3 x1
CUTTER 125A TRI
MT-125, 6 m x1 x1 x1 x1 x1
029804 2 m, 10 mm² MT-35K, 4 m 1 029910 039506 Starter kit
MT-125, 6 m x1 x3 x6 x1 x1
2 029859 039506
039575
Consumables kit 039964 4 m, 16 mm² Consumables kit 039544
036932 MT-125, 12 m x1 x3 x6 x1 x1
3 029866 039513
039575
Consumables kit 039544
AT-125, 12 m Analog x1 x5 x5 x1 (Ohmic) x1
4 029873 039520 039988 039148 039155 039209 039445 039308

NEOCUT 105
8 mm
MT-125, 6 m x1 x1 x1 x1 x1
1 063112 039506 Starter kit
10 mm Ohmic MT-125, 6 m x2 x3 x6 x3 x3
2 065871 039506
037717
Consumables kit 064720
Connec- Torch 4 m, 16 mm² MT-125, 12 m x2 x3 x6 x3 x3
tions Earth cable Manual torch CNC kit Skate trolley Diffuser Electrode Hose Nozzle Deflector 3 065888 036932
037717
Auto 039513 Consumables kit 064720
AT-125, 12 m Analog x1 x5 x5 x1 (Ohmic) x1
4 065995 039520 039988 039148 039155 039193 039445 039308
CUTTER 45 CT AT-125, 12 m Digital x1 x5 x5 x1 (Ohmic) x1
x1 x1 x1 x1 x1 5 068186 039520 064737 039148 039155 039193 039445 039308
MT-70, 6 m
1 062962 037502 Starter kit

x1 x3 x3 x1 x1
2 062979 2 m, 10 mm²
MT-70, 12 m
037519
NEOCUT 125
Consumables kit 061613
MT-125, 6 m x1 x1 x1 x1 x1
AT-70, 12 m Analog x1 x5 x5 x1 (Ohmic) x1 1 067448 039506 Starter kit
3 062986 037533 039988 037557 037564 037571 037618 037649
MT-125, 6 m x1 x3 x6 x1 x1
2 068193 039506
037717
Consumables kit 039544
4 m, 16 mm² MT-125, 12 m x1 x3 x6 x1 x1
3 068209 036932 039513
037717
Consumables kit 039544
AT-125, 12 m Analog x1 x5 x5 x1 (Ohmic) x1
4 068216 039520 039988 039148 039155 039209 039445 039308
AT-125, 12 m Digital x1 x5 x5 x1 (Ohmic) x1
5 068223 039520 064737 039148 039155 039209 039445 039308

16 www.gys.fr www.gys.fr 17
Accessories
Consumables

ACCESSORIES CUTTING GUIDES CONSUMABLES

Dehumidifier filter TPT compass kit
040205 Compatible with TPT 25K/35K - TPT40 - Z Diffuser Electrode Hose Nozzle
039728 Filter + cartridge
torches Torch model x2 x10 x10 x4 Consumables kit
039735 Cartridge only
040199 Guide carriage only
MT 25K 040182 MT 25K 039971

MT / TPT
040151
MT 35K 040229 MT35K 039964
Trolley Cutting x1 040175 x3 040168 x3 x1
MT 45K
MT compass kit 040212 040236 MT 45K 039957
TPT 40
040208 CUTTER 25 K
051331 CUTTER 35 K 037984 Torch compatible with MT-70 / MT-125
039575 CUTTER 85A / 125A 037977 Guide carriage only
037717 NEOCUT 105 / 125

Diffuser Electrode Hose Nozzle Ohmic nozzle Manual skate Auto deflector Consumables
Torch model Caliber
Dust filter x1 x5 x5 x1 x1 x1 x1 kit
Cutting kit /
x3 x3 037571 short 20-50 A
046580 chamfering / guiding 20-50 A x1 x3 037564 short x1 x1 037625
067196 long 061613

MT-70
CUTTER 70 / 85A / 125A / Cutting 037557 037601
038653 Torch compatible with MT-70 / MT-125 x3 037564 short x3 037588 short - x1 037625 short - 20-70 A
NEOCUT 105/125 70 A x1 x1
067189 long 067202 long 067216 long 037540
Gouging 70 A 037557 037564 037595 037601 037632

CNC linkage kit Precision Cut

039131 039155 039315 039216 039322
45 A
039988 CNC-1 Analogue
45 A x3 039162
064737 CNC-2 Digital 45/65/85 A
068957 CNC-3 Digital Retrofitting 65 A x1 x3 x3 039179 x1 x1
039131 039216 039230 039537
Cutting x3
85 A 039186

MT-125
x1 039155 x3 x1 x1 85/105 A
x3 - -
x1 x3 x1 x1 064720
105 A 039193
039148 x3 039223 039247 105/125 A
x1 x3 x1 x1
125 A x3 039209 039544

TORCHES
65-85 A 039131 039261 039216
Gouging 105 A 039155 039278 039254
039148 039223
125 A 039285
Duty cycle Reference
Reference Series Length Consumables Compatibility
60% 100% number
20-50 A 037571

AT-70
TPT 25 25 A 25 A 4m Includes 068087 CUTTER 25K Cutting 037557 037564 037601 037618 - 037649
70 A 037588
CUTTER 30 FV
TPT 40 40 A 4m Includes 060753
EASYCUT 40
Precision Cut
039315 037496
Manual

6m 037502 CUTTER 45 CT 45 A
MT-70 70 A 50 A
12 m 037519 CUTTER 70 CT 45 A 039131 039162 039216 039339

AT-125
- CUTTER 85A TRI Cutting 65 A 039155 039179 - 039292
6m 039506
CUTTER 125A TRI 85 A 039186
MT-125 125 A 105 A
NEOCUT 105 105 A 039193
12 m 039513 NEOCUT 125 039148 039223 039445 039308
125 A 039209

6m 037526 Precision Cut

CUTTER 45 CT 037516
AT-70 70 A 50 A 45 A
12 m 037533 CUTTER 70 CT
45 A 067523 067578 067592
AT-160

6m 038479 65 A 067530
CUTTER 85A TRI Cutting 067509 037493 - -
12 m 039520 CUTTER 125A TRI 85 A 067547
Automatic

AT-125 125 A 105 A

15 m 069787 NEOCUT 105 105-125 A 067554
- NEOCUT 125 067585 067608
20 m 069794 160 A 067561

6m 067479
12 m 067486
AT-160 160 A 125 A NEOCUT 125
15 m 069800
20 m 069817

18 www.gys.fr www.gys.fr 19
 w w w.gys.fr

GYS 2021 catalogue

Welding & Cutting

GYS FRANCE
1, rue de la Croix des Landes
53941 SAINT-BERTHEVIN - France
Tel : 02 43 01 23 60
www.gys.fr | [email protected]

Made in France
since 1964