Jean Neptune Rene
4116 Marchmont Blvd, Land O’Lakes, FL 34638
Phone: (561) 577-2434 Email: jrene3@[Link]
PROFESSIONAL SUMMARY
Detail-oriented and skilled EMC/Wireless Compliance Test Engineer with extensive
experience in ensuring electrical or electronic devices meet global regulatory standards.
Expertise in EMC/EMI testing, RF measurements, and compliance with FCC, ETSI, and
international standards. Proficient in conducting compliance tests, troubleshooting non-
compliance issues, and preparing certification documentation to ensure timely product
launches and smooth certification processes.
KEY SKILLS
• EMC/EMI Testing and Troubleshooting
• Wireless Compliance Testing (FCC, ETSI)
• Emissions and Immunity testing Measurement and Analysis
• Wireless Technologies: Wi-Fi, Bluetooth, LTE, Zigbee
• Regulatory Standards: FCC Part 15, ETSI EN 300 328, EN 301 893
• EMC/EMI Standards Compliance (CISPR and IEC 61000)
• AIM 7351731 Immunity to RFID Readers testing for medical devices
• Test Plan Evaluation & Execution
• Test Equipment: Spectrum Analyzers, Network Analyzers, Signal Generators, RF
Chambers
• Certification Process (FCC, CE Marking, and IECEE CB Scheme for Medical
devices)
• Test Report Documentation.
PROFESSIONAL EXPERIENCE
Senior EMC Engineer
TUV SUD America Tampa FL
March/2024 – Present
• Lead testing for EMC/EMI compliance for a variety of products, including
medical/ITE devices, and equipment for measurement, control laboratory use.
• Collaborate with engineering teams to resolve any test failures and work on
product design changes to achieve regulatory compliance.
• Operate RF testing equipment (spectrum analyzers, signal generators, network
analyzers) to conduct accurate measurements.
• Prepare detailed test reports documenting results and deviations, ensuring
compliance with regulatory standards.
• Continuously monitor and incorporate updates to standards or test methods to
ensure compliance with new and evolving regulations.
EMC Engineer
TUV SUD America Tampa FL
February/2017 – September/2023
• Perform EMC testing (setup, measurements, and documentation of results) in
accordance with applicable standards and test plans.
• Maintain knowledge of proper operational procedures of all relevant test
equipment
• Provide support to customers regarding the application of standards, test
procedures, interpretation of test results, and certification requirements.
• Update Training records with product standards, test procedures,
instrumentation, and technology
• improve lab daily EMC operations: sites check, asset inspection, verifications
characterizations.
EMC/Wireless Compliance Junior Test Engineer
Advanced Compliance Solutions (ACS) Boca Raton FL
September /2014 – February/2017
• Performed FCC 15.107 for Conducted Emissions, FCC 15.109 Radiated
Emissions for non-intentional radiator (Part 15 B) and FCC 15.207 CE and
15.209 RE for intentional radiator (15 C)
• Conducted both conducted (FCC 15.207) and radiated emissions (FCC 15.247/
FCC 15.407, Band Edge and Spurious) or (EN 300 328/ EN 301 893, Spurious)
tests for various wireless technologies, including Wi-Fi, Bluetooth, and LTE
devices.
• Performed. FCC Part 22/24/101, and Part 90 license testing.
• Performed FCC 15.209 Intermodulation emissions measurements.
• Developed and executed test plans based on regulatory guidelines, ensuring that
all required tests were completed efficiently and accurately.
• Extracted Data Package and drew EUT system block diagram for Test Report
documentation.
• Conducted preliminary evaluations (Screening) to evaluate EMC performance.
• Identifying root cause and troubleshooting for compliance failures, implementing
corrective actions and performing retests to achieve compliance.
EDUCATION
Completed the coursework of the Doctor of Philosophy in Electrical Engineering at
Florida Atlantic University (FAU), Boca Raton FL, with emphasize in Wireless
Communication.
Master of Science in Electrical Engineering
Florida Atlantic University, Boca Raton, FL
August/2013
Bachelor of Science in Electrical Engineering
Faculty of Applied Sciences, Port au Prince Haiti
August/2005
• Relevant coursework: Digital Communication Systems, Mobile Communication
Systems, Digital Processing of Signals, Wireless Sensor Network, Wireless
Personal Communication Systems, Vehicular Ad hoc Network (VANET), Fiber
Optic Communication.
• Master Thesis in Electrical engineering; “Performance Analysis of Slotted ALOHA
Protocol in a Weibull Fading
environment”.
TECHNICAL SKILLS
• Testing Tools: Spectrum Analyzers (Keysight, Rohde & Schwarz), EMI receiver,
Network Analyzers, Signal Generators, Oscilloscopes, Anechoic Chambers
• Software: MATLAB, Keysight ADS, R&S®EMC32, ETS-Lindgren's TILE4!, Toyo
IM5RS/ IM5CS
• Wireless Standards: 802.11 (Wi-Fi), Bluetooth, Zigbee, LTE, 5G NR
• Regulations & Standards: FCC Part 15, ETSI EN 300 328, EN 301 893, EN
55032, IEC 61000
• Protocols: Wi-Fi, Bluetooth, Zigbee, LTE, 5G
• Compliance Procedures: CE Marking, FCC Certification, IECE CB Scheme for
Medical
LANGUAGES
Fluent in speaking, writing, and translating French and Creole
PROFESSIONAL AFFILIATIONS
Membership to several Electrical Engineering, Wireless, and EMC groups such as:
IEEE Electromagnetic Compatibility Society, EMC Live, EMC Experts, Academy of
EMC, Engineers in Compliance, Telecoms Professionals: IoT, LTE, M2M, 5G, Internet of
Things, Wireless Communications & Mobile Networks.
* References Available Upon Request *
