ENERGY AUTOMATION PRODUCTS

SIPROTEC 7SX85
Universal Protection Relay
siemens.com/7SX85

Benefit from the advantages ○ The range of functions that can be used in the device is
determined by the specified function class
One device type covers all protection, control and automation
tasks across all voltage levels. ○ If required, simply extend the function point class in a few
minutes via the new SIPROTEC Function Point Manager ap-
The SIPROTEC 7SX85 elegantly supports the versatile operat-
plication
ing processes in the power supply chain, whether in utilities,
industry or infrastructure.
Your benefit with only 1 universal type of device
With the new SIPROTEC 7SX85 universal protection device,
○ Optimization of investment and operating costs
you leverage the full power of the complete SIPROTEC 5 sys-
- Time and cost savings during project planning
tem platform.
- Significant reduction of logistics and spare part costs
When selecting a device, use one of the 3 predefined hard-
○ Full flexibility until shortly before commissioning, easy
ware variants or assemble your desired device from the hard-
function adjustment via the function point manager
ware catalog and add the required functionality:
○ For grid operators: easy adaptation when network condi-
○ 3 predefined standard variants with
tions change after commissioning, e. g. use as line differ-
- 4/4 I/U converter and 11/9 BI/BO or
ential protection instead of distance protection
- 4/4 I/U converter and 7/14 BI/BO or
- 8/0 I/U converter and 7/7 BI/BO ○ For industrial applications: simple addition of necessary
or configure motor or frequency protection functions to the feeder pro-
optional SIPROTEC 7SX85 from the modular hardware cat- tection.
alog to suit your needs
○ For energy producers: Easy adaptation of device functions
○ Max. 443 binary inputs, 225 binary outputs and 64 analog when connecting regenerative feeders
inputs
○ Migration of existing device specific application templates
○ Load the required functions from the extensive and parameterizations (7SA86, etc.)
SIPROTEC 5 function library into the device configuration
○ Optimally suited for retrofit applications
simply by dragging and dropping them with the powerful
DIGSI 5 configuration tool
Areas of application: Automation, control, and monitoring
○ Protection and control of feeders, lines, transformers, ○ Automatic frequency unloading for load shedding in case
motors, generators, and capacitance banks of underfrequency, considering changed feed-in condi-
tions due to decentralized power generation
○ Detection and selective 1-pole and 3-pole tripping of
short-circuits ○ Synchronization of generators (power plant units) with
the power grid or synchronization of 2 power grids for up
○ Detection of ground faults of any type in compensated or
to 4 synchronization points
isolated electrical power systems using the following
functions: 3I0>, V0>, transient ground fault, cos φ, sin φ, ○ Automatics, controls, synchrocheck and protection
dir. detection of intermittent ground faults, harmonic de- against switching faults
tection, and admittance measurement
○ Voltage controller function for two-winding transform-
ers, three-winding transformers and grid coupling trans-
Protection applications:
formers
○ Distance protection with a wide variety of pickup meth-
○ Phasor Measurement Unit (PMU)
ods
○ Differential protection of overhead lines and cables of all
lengths with up to 6 line ends fed from one or more sides Our tip:
○ Protection of motors and generators against thermal Register in the Industry Mall, create an account and benefit
overload of the stator and the rotor due to overcurrent, fully from our SIPROTEC 5 configurator.
cooling problems or restarts
Advantages / benefits for users registered and logged in
○ Monitoring the thermal state and the bearing tempera-
to the Industry Mall:
tures with temperature measurement
○ Personal product list, with automatic storage of the last
○ Detection of idling drives of e. g. pumps and compressors
50 configurations
○ Reverse power protection
○ Insertion of comments (e. g. naming of a branch name
○ Protection of capacitance banks, such as overcurrent, for the configured device)
overload, current unbalance, peak overvoltage, or differ-
○ Automatic saving of the function point calculation
ential protection
○ Visibility of regional list prices (non-logged-in users get
○ Directional reactive power undervoltage protection
the message: Price on request)
(QU protection)
○ Protection against instability due to undervoltage
○ Serial protection communication over different distances
and physical media, such as optical fiber, two-wire con-
nections, and communication networks

Siemens AG
Smart Infrastructure
Electrification & Automation
Mozartstraße 31 C
91052 Erlangen, Germany
Customer Support: http://www.siemens.com/csc

© Siemens 2022. Subject to changes and errors.

For all products using security features of OpenSSL, the following shall apply: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(www.openssl.org), cryptographic software written by Eric Young ([email protected]) and software developed by Bodo Moeller.