C&N INDUSTRIAL(HUITONG - HONGCHENG)
Aluminium 6060 pipe fitting, Aluminium 6060 ELBOW,
ELBOW,Aluminium 6060 Flange,
TEMPER TYPES
The most common temper for 6060 aluminium is:
Commercial 6060
• T5 - Cooled from an elevated temperature shaping
EN 6060
process and artificially aged
Aluminium alloy 6060 is a medium strength heat
treatable alloy with a strength slightly lower than
6005A. It has very good corrosion resistance and very
good weldability plus good cold formability especially in
temper T4. It is commonly used alloy for very • Extrusions
complex cross sections and has very good anodizing
response. GENERIC PHYSICAL PROPERTIES
om
Applications Property Value
Alloy 6060 is typically used for extrusions with complex
Density 2.70 g/cm³
c
cross sections and/or requiring anodising:
g.
~ Architectural sections for windows, doors, curtain Melting Point 655 °C
walls Thermal Expansion 23.4 x10-6 /K
~ Interior fittings, frame systems, lighting, ladders,
railings, fences in
Modulus of Elasticity 69.5 GPa
itt
~ Heat sink sections, electronic modules, electro motor Thermal Conductivity 209 W/m.K
ef
housings
~ Flexible assembly systems, special machinery Electrical Resistivity 54 % IACS
ip
elements Electrical Resistivity 0.032 x10-6 Ω .m
~ Truck and trailer flooring, pneumatic installation,
yp
railway, inside applications
~ Irrigation, heating and cooling pipes
MECHANICAL PROPERTIES
llo
~ Furniture, office equipment.
.a
BS EN 755-2:2008
CHEMICAL COMPOSITION Extrusions
Up to 150mm Dia., 15mm WT tube, 5mm WT profiles
w
BS EN 573-3:2009 Property Value
w
Alloy 6060
Proof Stress 120 Min MPa
w
Element % Present
Tensile Strength 160 Min MPa
Magnesium (Mg) 0.35 - 0.60
Elongation A50 mm 6 Min %
Silicon (Si) 0.30 - 0.60
Hardness Brinell 60 HB
Iron (Fe) 0.10 - 0.30
Elongation A 8 Min %
Zinc (Zn) 0.0 - 0.15
Others (Total) 0.0 - 0.15 Related material
Titanium (Ti) 0.0 - 0.10
Manganese (Mn) 0.0 - 0.10 we can also produce Alloy 6060 fitting, 6061
flange,6061 fitting,5083 flange,5083 fitting, 5086 pipe
Copper (Cu) 0.0 - 0.10 fitting and 5086 flange. 5083 fitting, 6063 pipe fitting
Other (Each) 0.0 - 0.05 and 6063 flange.
Chromium (Cr) 0.0 - 0.05
Aluminium (Al) Balance
Add: Wuliyao Yanshan County,CangZhou City,HeBei Province 061300 Tel /Fax:86-317-6287569
C&N INDUSTRIAL(HUITONG - HONGCHENG)
Aluminium 6060 pipe fitting, Aluminium 6060 ELBOW,
ELBOW,Aluminium 6060 Flange,
c om
g.
in
itt
ef
ip
yp
llo
.a
w
w
w
Add: Wuliyao Yanshan County,CangZhou City,HeBei Province 061300 Tel /Fax:86-317-6287569
Email:
[email protected],
[email protected] www.alloypipefitting.com
Add: Wuliyao Yanshan County,CangZhou City,HeBei Province 061300 Tel /Fax:86-317-6287569
SHANGHAI C&N INDUSTRIAL GROUP LIMITED
Add: 601,Xingchen Building, No.1221 Husong Road, Songjiang District, Shanghai, 201615 China
Tel:+86 021-31267504 Fax:+86 021 31267569 Web:www.cnpipefitting.com
CERTIFICATE OF QUALITY INSPECTION
EN10204 -3.1
Customer Code: CN990 Certificate No.: CN990006PF1
Order No. CN990006 Works No. 006-PF1
Article: Pipe and accessories According to DIN 2605
Material: Alu 6060 Condition in Supply T6
A.Content of the delivery
Quantity
Item Description Heat No.
(Pcs)
1 2000 SMLS 6060 EN755 DIN 2605 90DEG LR ELBOW 110x5 90D (OD108 x 5mm) 23AC87551
2 1500 SMLS 6060 EN755 DIN 2605 90DEG LR ELBOW 100x5 90D 22AD45713
3 1000 SMLS 6060 EN755 DIN 2605 90DEG LR ELBOW 30x5 90D 22AC63147
4 1000 SMLS 6060 EN755 DIN 2605 90DEG LR ELBOW 40x5 90D 22AD55431
B.Chemical analysis
Si％ Fe％ Cu％ Mn％ Mg％ Cr％ Zn％ Ti％ Al％ Other%
Heat No.
0.30~0.60 0.10~0.30 ＜0.10 ＜0.10 0.35~0.60 ＜0.50 ＜0.15 ＜0.10 ＜0.15
23AC87551 0.39 0.15 0.03 0.02 0.45 0.01 0.02 0.01 Remainder 0.03
22AD45713 0.43 0.18 0.02 0.02 0.49 0.02 0.02 0.03 Remainder 0.02
22AC63147 0.41 0.14 0.01 0.01 0.46 0.02 0.01 0.03 Remainder 0.03
22AD55431 0.42 0.17 0.02 0.02 0.51 0.01 0.01 0.02 Remainder 0.03
C.Mechanical properties tests
Yield Strength Tensile Strength Elongation Roughness Impact Test
Heat No. (Mpa) (Mpa) (%)
＞150 ＞190 ＞8
23AC87551 171 235 12 Accept N/A
22AD45713 185 240 12 Accept N/A
22AC63147 170 242 13 Accept N/A
22AD55431 180 245 13 Accept N/A
D.Visual and dimensional inspection:
Item Visual Inspection Dimension Inspection
Conclusion Accept Accept
E.Remark
1, The goods are manufactured according to a quality management system approved and registered to ISO 9001:2015, meet PED 2014/68/EU,Annex
1.Paragraph 4.3
2,These pipe and accessories were manufactured, sampled, tested and inspected accordance with specification, and were found to meet the
requirements,
Lister: Bobby Date: 2023/3/31 Quality Controller:
SHANGHAI C&N INDUSTRIAL GROUP LIMITED
Add: 601,Xingchen Building, No.1221 Husong Road, Songjiang District, Shanghai, 201615 China
Tel:+86 021-31267504 Fax:+86 021 31267569 Web:www.cnpipefitting.com
CERTIFICATE OF QUALITY INSPECTION
EN10204 -3.1
Customer Code: CN990 Certificate No.: CN990006PF2
Order No. CN990006 Works No. 006-PF2
Article: Pipe and accessories According to DIN 2605
Material: Alu 6060 Condition in Supply T6
A.Content of the delivery
Quantity
Item Description Heat No.
(Pcs)
5 1000 SMLS 6060 EN755 DIN 2605 90DEG LR ELBOW 45x5 90D 22AE80271
B.Chemical analysis
Si％ Fe％ Cu％ Mn％ Mg％ Cr％ Zn％ Ti％ Al％ Other%
Heat No.
0.30~0.60 0.10~0.30 ＜0.10 ＜0.10 0.35~0.60 ＜0.50 ＜0.15 ＜0.10 ＜0.15
22AE80271 0.43 0.16 0.02 0.01 0.43 0.01 0.02 0.02 Remainder 0.04
C.Mechanical properties tests
Yield Strength Tensile Strength Elongation Roughness Impact Test
Heat No. (Mpa) (Mpa) (%)
＞150 ＞190 ＞8
22AE80271 177 241 14 Accept N/A
D.Visual and dimensional inspection:
Item Visual Inspection Dimension Inspection
Conclusion Accept Accept
E.Remark
1, The goods are manufactured according to a quality management system approved and registered to ISO 9001:2015, meet PED 2014/68/EU,Annex
1.Paragraph 4.3
2,These pipe and accessories were manufactured, sampled, tested and inspected accordance with specification, and were found to meet the
requirements,
Lister: Bobby Date: 2023/3/31 Quality Controller:
