MMP-T Motor Protection Catalogue
MMP-T Motor Protection Catalogue
Specifications 12
2 3
Do there
Desire to requirements
down-size
the machine sound
control
panels familiar?
S
help you solve there issues.
Desire to
increase wiring
efficiency
S mall
Down-sizing
S mart wiring
Wiring reduction
Global S tandard
Worldwide coverage
Desire to
meet global
demands
4 5
MOTOR CIRCUIT BREAKERS
Outline
w
on of Lo rs
Integrati ke
circuit b re a When the motor circuit is configured When the motor circuit is configured
voltage a l O v erload
rm in a Low voltage circuit breakers and in a Motor circuit breaker and
and The nctions
Relays fu
Magnetic motor starters Magnetic Contactor
Low voltage
circuit breakers Disconnection Disconnection
Magnetic Contactor
(Released at the same time, New MS-T Series)
Thermal Overload
Relays
Motor control Motor control
(Released at the same time, New MS-T Series)
6 7
MOTOR CIRCUIT BREAKERS
also the motor circuit are required to comply with the standards of the respective countries including UL and EN standards.
The electric wires and devices that make up the motor control circuit (Low Voltage Circuit Breakers, Fuse, Magnetic Contactor,
Thermal Overload Relays) must be protected under a short-circuit condition. In addition, we need to select each device considering
Space-saving design has realized down-sizing of the control panel.
their functions and characteristics. Thus, we have encountered difficulties in realizing the reliable circuit protection at times.
Space saving-applied example
The device to reduce such burden is our "Motor circuit breaker". Undertaking multiple protection roles stated above, the Motor MMP-T series
circuit breaker can not only protect electric wires and load devices from short-circuit accident but also simplify motor circuit
combination. In addition, in North America, a control panel shall be marked with SCCR (short-circuit current rating), but even high Conventional method A method in which a Motor circuit breaker is used
SCCR that cannot be covered by the combination of Low voltage circuit breakers and Magnetic motor starters can be covered
by the use of a Motor circuit breaker.
Connection diagram Connection diagram
Having these advantages tends to increase demand for "Motor circuit breakers".
Inside of the control panel Inside of the control panel
Example: In case of application in North America
Motor circuit general combination Combinations using Motor circuit breakers Type E/F combination
Power supply
When using a Motor circuit
M M M
General motor circuits have many devices Application of a Motor circuit breaker In addition, using the line side terminal adapter
to be combined and are complicated. can integrate the role of path kit and short-circuit indicator unit enables the
disconnection, motor control and Type E/F circuit combination and also enables
motor overload protection, to make branch circuit protection in addition to the
the circuit simple. protection functions of , , and .
In order to connect motor circuit breaker and magnetic contactor, please use the connection conductor unit.
Wiring Combination of Motor circuit breaker and option enables wiring reduction and space saving. This allows us to
reduction & respond to the needs of down-sizing the control panel, which increases the demand for Motor circuit breakers. (For
Space details about wiring reduction & space saving, please refer to the next section. )
saving
8 9
MOTOR CIRCUIT BREAKERS
S Wiring reduction
Using a wiring streamlining terminal facilitates the wiring! As with the combination of Low voltage circuit breakers, Magnetic
Contactor, and Thermal Overload Relays, the combination of Motor circuit
breaker and Magnetic Contactor can prevent secondary disasters.
Low voltage
circuit
breakers
This surely
Screw holder lifts up the screw Insert a round solderless terminal Tighten the screw guards the device
even when
Magnetic short-circuit
Contactor
occurs.
Wiring reduction-applied example MMP-T series
Thermal
Overload
Relays
Electric wire-used wiring example Conductor-joint-unit-used wiring example
ce of
Occurrrte-cnircuit
sho
Electric wire
Connection
conductor
units
Control terminal
section of Magnetic
Contactor
S Global Worldwide coverage
tandard
Acquisition of main international standards can support customers' overseas business. MMP-T series
Both common electric wire-used wiring and unit-used wiring are available! Using the unit facilitates combina-
Certification to various major international standards
Not only major international standards such as IEC, JIS, UL, CE, and CCC but also other national standards
tion with respective devices. In addition, the terminal connected to control terminal of magnetic contactor
are certified. This will help our customers expand their business in foreign countries. This will help our
arranged at the front also facilitates the wiring, thus contributing to improvement of production.
customers expand their business in foreign countries.
Applicable standard Safety certification standard
International Japan European countries China U.S. & Canada
EN
Certification body GB
Standards EC directive
IEC JIS
UL60947-4-1A Type E/F is also covered.
Compliance of the device to UL's Type E/F combination can surely respond to export to the U.S.A. For details, please read refer to Page 16.
10 11
MOTOR CIRCUIT BREAKERS
Specifications
12 13
MOTOR CIRCUIT BREAKERS
100000
UT-RT10
Jointing block unit UT-RT20 A set of the blocks for mechanically connecting two mounting base units.
UT-RT32
10000
The momentary
release characteristic
1 is 1040% to 1560%
of the maximum set
current.
0.1
0.01
100 1000 10000
14 15
MOTOR CIRCUIT BREAKERS
Outline Drawing
14
1 5
M4 threads L1
3
L2
L3
(Captive screws)
50
32
5
1 5
MMP-T32
99
3
L1 L2 L3
Top Hat Rail (35mm)
50
90
72
187
163
12 UT-MT20
M3.5 threads
Test bar 2/T1 4/T2 6/T3 (Captive screws)
(Manual trip)
13.5 13.5 44
60
45
64 S-T12/20
76 6
17 9 6
65
45 84
1 5
14
1 5
3
L2
L1 L3 3
L2
50
L1 L3
50
MMP-T32
MMP-T32
99
97
Top Hat Rail (35mm)
Top Hat Rail (35mm)
191
UT-MT20
167
M3.5 threads
M3.5 threads UT-MT32
(Captive screws)
(Captive screws)
S-T10
S-T32
17 9 6
65
45 84 6
20 12.5 65
45 87
16 17
MOTOR CIRCUIT BREAKERS
Outline Drawing
17
(Self-lifting)
31
62
27
11
107
MMP-T32
28
MMP-T32
UT-MAX(LL)/UT-MAL(LL)
* The diagram above shows two UT-MAX(LL) and/or UT-MAL(LL) in mounted condition.
Dimension A B C
The outline dimensions of UT-MAX(LL) and UT-MAL(LL) are the same. UT-2B4 90 80 45
UT-2B5 102 92 57
UT-3B4/UT-3B5 A UT-3B4/UT-3B5
B
C 33
13.5 13.5
45 59
UT-EP3 UT-EP3
13.5 33
17
31
25
62
39
70
MMP-T32
107
115
MMP-T32
Dimension A B C
UT-3B4 135 125 45
UT-3B5 159 149 57
18 19
MOTOR CIRCUIT BREAKERS
Outline Drawing
UT-CV3 B
45 55
15
UT-RT
36
60
104
17
UT-TU
208
7.7 20
125
160 +0.1
S-T
M4×20 screw 6
35
45 38
97
Dimension A B C Combination Magnetic Contactors
UT-BT20 163 106 116 S-T10/T12/T20 C 9 (The height of rail is 15mm)
UT-BT32 167 104 120 S-T32
20 21
MOTOR CIRCUIT BREAKERS
On basic configuration circuit of NEC (National Electric Code) and application to Motor circuit breaker UL60497-4-1A and Type F
The Clause 430 of NEC (National Electric Code) regulates the basic configuration of an electric motor protection circuit to be as shown in
the following figure. UL standards define several motor circuit configurations, and among them you find Type E and Type F using a Motor Basic circuit An example of Type F circuit using MMS
circuit breaker. A Mitsubishi Motor circuit breaker can be used for path disconnecting, motor control and protection from overload as a
UL 489 Listed UL 489 Listed
single unit, but can also be used as Type E in combination with specific options, and as Type F in combination with Magnetic Contactors. Circuit Breakers Circuit Breakers
Type F
By using a Motor circuit breaker to conform to the motor circuit configuration defined by UL, you can reduce the number of applicable
devices against NEC basic circuit configuration, and further enhance the value of SCCR.
UL60947-4-1A Type E UL60947-4-1A Type E UL60947-4-1A Type E
UL 489 Listed UL 489 Listed UL 489 Listed combination motor controller and combination motor controller and combination motor controller and
Circuit Breakers Circuit Breakers Circuit Breakers the connection conductor unit the connection conductor unit the connection conductor unit
Motor circuit general configuration Configurations using Motor circuit breakers Type E/F configuration
M M M
Type E/F Selection List
[UL60947-4-1A Type E Selection List]
General motor circuits have many devices Application of a Motor circuit breaker In addition, using the line side terminal adapter 3PH 3PH
220-240V 440-480V Combination units
to be combined and are complicated. can integrate the role of path kit and short-circuit indicator unit enables the Motor
Setting range Maximum Maximum rated Maximum Maximum rated SCCR [kA]
disconnection, motor control and Type E/F circuit configuration and also circuit breaker
rated capacity operational current rated capacity operational current Line side terminal Short-circuit
adapter kit indicator unit
motor overload protection, to make enables branch circuit protection in addition (HP) (A) (HP) (A)
0.1 to 0.16 0.16 0.16
the circuit simple. to the protection functions of , , and .
0.16 to 0.25 0.25 No horse 0.25
0.25 to 0.4 No horse 0.4 power settings 0.4
0.4 to 0.63 power settings 0.63 0.63
1
UL60947-4-1A and Type E
0.63 to 1 1 1/2
1 to 1.6 1.6 3/4 1.6
1.6 to 2.5 1/2 2.2 1 2.1 50
MMP-T32 2.5 to 4 1 4 2 3.4 UT-CV3 UT-TU
Since Type E can be used as BCP, it can be used in place of upper
4 to 6.3 1-1/2 6 3 4.8
class BCP. Therefore you will have a further merit of reducing the 5.5 to 8 2 6.8 5 7.6
number of breakers. 7 to 10 3 9.6 5 7.6
9 to 13 3 9.6 7-1/2 11
Basic circuit Type E applicable circuit 12 to 18 5 15.2 10 14
18 to 25 7-1/2 22 15 21
25
BCP: Branch Circuit 24 to 32 10 28 20 27
BCP: Branch Circuit
Fuse Protection Devices Fuse Protection Devices
UL 489 UL 489
[UL60947-4-1A Type F Selection List]
(Fuse or UL 489 Listed Circuit (A device of Type E, fuse or
Listed Circuit Breakers) Listed Circuit 3PH 3PH
UL 489 Listed Circuit Breakers)
Breakers Breakers Current 220-240V Combination 440-480V Combination Connection
Motor
setting Maximum Maximum rated Magnetic Maximum Maximum rated Magnetic conductor SCCR [kA]
circuit breaker
range rated capacity operational current Contactors rated capacity operational current Contactors unit
(HP) (A) (HP) (A)
Fuse Fuse Fuse Fuse 0.1 to 0.16 0.16 S-T10/T12 0.16
0.16 to 0.25 0.25 No horse 0.25
S-T10/T12/
0.25 to 0.4 No horse 0.4 S-T10/T12/ power settings 0.4 UT-MT20
Breaker Breaker Breaker Breaker T20
0.4 to 0.63 power settings 0.63 T20 0.63 for
0.63 to 1 1 1/2 1 S-T10/T12/T20
1 to 1.6 1.6 3/4 1.6
UL60947-4-1A Type E UL60947-4-1A Type E UL60947-4-1A Type E UL60947-4-1A Type E 1.6 to 2.5 1/2 2.2 1 2.1
Motor circuit Motor circuit Motor circuit Motor circuit MMP-T32 UT-MT32 50
breaker breaker breaker breaker
combination combination combination combination 2.5 to 4 1 4 2 3.4 S-T10/T12/
motor controller motor controller motor controller motor controller S-T10/T12/
4 to 6.3 1-1/2 6 3 4.8 T20/T32 for
T20/T32
5.5 to 8 2 6.8 5 7.6 S-T32
M M M M M M M M 7 to 10 3 9.6 5 7.6
9 to 13 3 9.6 7-1/2 11 S-T12/T20/T32
12 to 18 5 15.2 S-T20/T32 10 14
This shows a Type E combination motor controller consist of Motor circuit UL60947-4-1A Type E 18 to 25 7-1/2 22 15 21 S-T32
breaker, line side terminal adapter kit and short-circuit indicator unit.
combination S-T32 UT-MT32
motor controller 24 to 32 10 28 20 27
22 23
MOTOR CIRCUIT BREAKERS
About Warranty
Before purchasing and using our products, please confirm the following product warranty.
High speed, large capacity data processing is now achieved to cope with increasingly
complicated production/manufacturing facilities.
Period and scope of warranty Exemption from warranty related to opportunity or secondary losses.
High speed, high accuracy machine control is achieved by multi-CPU configuration using various
Warranty period Regardless of in or out of warranty period, loss of opportunity and lost earnings
controllers that support iQ Platform.
(1) The warranty period for our products shall be one year after purchase at the customer side caused by the failures of our products, any damages
The support for Ethernet with built-in CPU allows easy connection of a programming tool, GOT.
or delivery to the designated location. However the maximum warranty caused by special situation regardless of our foreseeability, secondary losses,
Lineup of 20 models, ranging from small capacity of 10k steps to large capacity of 1000k steps
period shall be 18 months after production, in consideration that the accident compensation, damages on anything other than our products,
compensation to other jobs, and damages caused by any reasons for which A rich network integrates various FA layers seamlessly.
maximum length of distribution period is to be 6 months after shipping.
(2) This warranty period may not apply in the case where the use we are not held responsible, shall be outside the scope of our compensation. Production Specifications
environment or use conditions specifically impact the life of products. Program capacity 10k steps - 1000k steps
Number of input/output points [X/Y] / 256 points - 4096 points/8192 points
Scope of warranty Applicable areas of our products number of input/output device points[X/Y]
Basic instructions' processing speed (LD instruction) 120ns - 9.5ns
(1) When any failure occurs during the above warranty period which is
(1) The contents of products shown in this catalog are for your selection of External connection interface USB (supported by all models), Ethernet, RS-232, memory card
clearly our responsibility, we will replace or repair the failed portion of Function unit I/O, analogue, high-speed counter, positioning, temperature input, temperature adjustment, network unit
models. When you actually use the product, read the "Instruction Manual"
the product free of charge at the location of purchase or delivery. Unit expansion mode Building block type
carefully beforehand and use correctly. Please note that the external view Network Ethernet, CC-Link IE controller, CC-Link IE field, CC-Link, CC-Link/LT, MELSECNET/H,
Note that the "failure" mentioned here shall not include such items as SSCNET, AnyWire, RS-232, RS-422
or specifications that should not affect the model selection can change
scratches and discoloration which do not affect performance.
without preannouncement. HMI Graphic Operation Terminal GOT2000 Series GT27 Model
(2) In the following cases, even during the warranty period, charged repair
(2) When using a product listed in this catalog, you are required to accept that
services shall be applied.
your use should not lead to any serious accident if by any chance the
Failures caused by inappropriate conditions, environment, handling, To the top of HMIs with further user-friendly, satisfactory standard features.
product develops any failures or errors, and, in the event any failure or
and uses other than those specified in catalogs, instruction manuals
error occurs, backup or fail-safe functions are in place outside the device Comfortable screen operation even if high-load processing (e.g. logging, device data transfer)
or specifications.
by the system. is running. (Monitoring performance is twice faster than GT16)
Failures caused by inappropriate installation.
(3) The products described in this catalog are designed and manufactured as
Failures caused by the design of customer's equipment or software. Actual usable space without using an SD card is expanded to 128MB for more flexible screen design.
general products to be used for general industrial fields. For this reason,
Failures caused by the customer tampering with our products such Multi-touch features, two-point press, and scroll operations for more user-friendliness.
the products described in this catalog should not be used for the
as reworks without our authorization. Outline font and PNG images for clear, beautiful screen display.
applications requiring special quality assurance systems, such as serious
Failures caused by uses of the product other than ordinarily intended.
public uses as atomic power plants and other power plants owned by
Failures caused by force majeure such as fire and abnormal voltage Product Specifications
power companies, railway applications and government and public office Screen size 12.1", 10.4", 8.4" (15" coming soon)
accidents, and natural disasters such as earthquake, wind and flood.
applications. Resolution SVGA, VGA (XGA coming soon)
Failures caused by reasons that were unforeseeable by the level of Intensity adjustment 32-step adjustment
Note, however, that the products shall be applicable to such uses if the use
technology at the time of shipment. Touch panel type Analog resistive film
is limited and the customer agrees not to require specially high quality. Built-in interface RS-232, RS-422/485, Ethernet, USB, SD card
(3) The warranty that is mentioned here shall mean warranty of the unit of
Furthermore, when the customer is investigating application for the uses Applicable software GT Works3
delivery, and any losses induced by the failures of delivered products Input power supply voltage 100 to 240VAC (+10, −15), 24VDC (+25, −20)
where serious impact is foreseen to the human body and assets and
shall be excluded from our warranty.
therefore high reliability for security and control system is required, such as Inverter FR-A800 Series
Failure diagnosis aviation, medical services, railways, combustion and fuel equipment,
In principle, primary failure diagnosis shall be conducted by the customer. manned transportation equipment, entertainment facilities and security
However this job, if requested by the customer, can be performed by us or machines, please contact our representatives and discuss any necessary
High-functionality, high-performance inverter
our service company with charge. In this case, a service fee shall be agreement or specifications. Realize even higher responsiveness during real sensor-less vector control or vector control, and
charged to the customer in accordance with our price list.
achieve faster operating frequencies.
The latest automatic tuning function supports various induction motors and also sensor-less PM motors.
Supply period of spare goods after production stop
Recommendation for renewal due to life The standard model is compatible with EU Safety Standards STO (PLd, SIL2). Add options to
(1) For our Motor circuit breakers, no repairs or supply of spare parts are
Our Motor circuit breakers with contacts and mechanical parts have certain support higher level safety standards.
provided by us.
wear life in line with the number of open/close operations, while our mold (2) For the discontinuation of production, we will announce in such media as
A variety of useful functions provide USB memory support and customization with a PLC function.
components, coil wires, electronic parts and grease have aging degradation "Sales and Service" paper created by us.
Product Specifications
life influenced by the use environment and use conditions.
Inverter capacity 200V class: 0.4kW to 90kW, 400V class: 0.4kW to 500kW
Regarding the use of our Motor circuit breakers, we recommend customers to Control method High-carrier frequency PWM control (Select from V/F, advanced flux vector,
renew the products every 15 years as a rule, provided that the products are real sensor-less vector or PM sensor-less vector control), vector control (when using options)
Output frequency range 0.2 to 590Hz (when using V/F control or advanced flux vector control)
used in line with the number of open/close operations specified by this catalog
Regenerative braking torque 200V class: 0.4K to 1.5K (150% at 3%ED) 2.2K/3.7K (100% at 3%ED) 5.5K/7.5K (100% at 2%ED)
or the instruction manual or under the standard use conditions of Molded Case (Maximum tolerable usage rate) 11K to 55K (20% continuous) 75K or more (10% continuous), 400V class: 0.4K to 7.5K (100% at 2%ED)
Circuit Breakers and Earth-Leakage Circuit Breakers as mentioned by "The 11K to 55K (20% continuous) 75K or more (10% continuous)
Starting torque 200% 0.3Hz (3.7K or less), 150% 0.3Hz (5.5K or more) (when using real sensor-less vector, vector control)
Report on Recommended Renewal Timing for Low Voltage Devices" issued by
Japan Electrical Manufacturers' Association (JEMA).
24 25
MOTOR CIRCUIT BREAKERS
AC Servomotor Mitsubishi General Purpose AC Servomotor MELSERVO J4 Series 3-phase motor High Performance Energy Saving Motor, Super Line Eco Series SF-HR
High-performance servomotor of industry-leading level High grade model, pursuing energy saving
Industry-leading level of basic performance: Speed frequency response (2.5kHz), 4M pulse By design and manufacturing technology pursuing ultimate low loss, industry-leading high efficiency
(4,194,304p/rev) encoder and energy saving have been realized.
Advanced one-touch tuning function allows one-touch adjustment of advanced vibration suppression control II. The advanced flux vector control by our inverter enables 100% constant torque continuous operation of 1:10.
Large capacity drive recorder and machine diagnosis function are implemented. It has achieved The bearing grease life has been prolonged (by a factor of 2.5 compared to our conventional
reduction of maintenance load. products). Allowing maintenance-free operation for a long time.
The lineup of servo-amplifiers with two-axis/three-axis in a body. This has achieved energy saving, Achieved low-noise operation (5 to 6dB reduction compared to our conventional products). The use
space saving, wiring reduction and cost saving. of identical dimensions by the standard motor (with some exceptions) allows easy switching.
Production Specifications Production Specifications
Power unit specifications Single phase/3-phase AC200V Number of poles Two-poles, four-poles, six-poles
Instruction interface SSCNETIII/H, pulse train, analogue Voltage, frequency 200/200/220V 50/60/60Hz EPAct 230V 60Hz
Control mode Position control, speed control, torque control or 400/400/440V 50/60/60Hz EPAct 230V 60Hz
Speed frequency response 2.5kHz Outer cover structure Totally-enclosed fan-cooled type (indoor type, outdoor type)
Tuning functions Advanced one-touch tuning, advanced vibration suppression control II, robust filter, etc. Protection mechanism IP44
Safety functions STO, SS1, SS2, SOS, SLS, SBC, SSM (to be supported by the combination with a motion controller) Motive energy transmission method The two-pole motors of 11kW or higher are only for direct driving, while four poles or higher are used for both direct driving and belt driving.
Supported servomotors Revolving servomotor, linear servomotor, direct drive motor Rotation direction Counterclockwise direction as viewed from the axial end (CCW).
Revolving servomotor capacity range 0.05 - 7kW Efficiency value Domestic 3 ratings: JIS C 4212 efficiency standard value or higher, 230 (460) V 60Hz:EPAct standard value or higher
CNC Mitsubishi Numeric Controller M70V Series Low voltage breaker Mitsubishi No-fuse Breaker, Earth Leakage Breaker WS-V Series
A global standard model pursuing speed and precision The optimum breaker proposal by double specifications, for mechanical equipment uses and
for receiving/distributing equipment uses
With the control by instruction unit being 0.1μm and internal interpolation unit being 1nm, high
precision and smooth mechanical work have been achieved. A general purpose Magnetic Contactor of 10A frame has achieved the smallest size in the industry with a width of 36mm.
Operation and display that do not let one feel the layer structure of the screen, as well as easy Adoption of new breaker technology Expanded ISTAC enables excellent performance of one-rank higher.
program control using standard implementation of Ethernet I/F have been realized. With conformance to various overseas standards, the product supports the global export of power
A compact unit integrating a display and controller being integrated has contributed to boards and machines.
miniaturization of the control panel. By realizing the common use of internal accessory devices, it contributes to shorter delivery time
The lineup of Type A suited for combined lathe and Type B suited for tapping center and reduction in number of inventory items.
Production Specifications Production Specifications
Maximum number of control axes (NC axis + main axis + PLC axis) Type A: 11 axes Type B: 9 axes Frame 32A - 250A frame
Maximum number of paths Type A: 2 paths Type B: 1 path Supported (conforming) standards Support for (conformance to) various standards such as JIS, IEC, GB, UL and /CSA.
Minimum instruction unit 0.1μm Expand the items of UL registration Support for SCCR requirements by expansion of AC480V and high breaker capacity products.
Minimum control unit 1nm Common use of internal accessory devices The conventional three types of internal accessory devices for each A frame have now been unified to one common type.
Maximum program memory capacity Type A: Max.2,000KB (5,120m) Type B: 500KB (1,280m) Common voltage of AC/DC The AC/DC for no-fuse breaker 32A/63A frame have been unified (except for NF63-CVF).
Maximum PLC program memory capacity Type A: 32,000 steps Type B: 20,000 steps Mounting to DIN rail Supported as standard by all models of small size F Style types 32A - 125A frame.
Main functions (for machining center) OMR-DD control (high-speed synchronous tapping function), high-speed high precision control, tool tip control, tilted surface work, etc. Support for finger protection Supports IP20 from the direction of the terminal part front side as standard for all models of
Main functions (for lathe) Milling interpolation, 2-path simultaneous thread cutting, inter-path control axis synchronization, control axis superposition, mixed control, etc. small size F Style types 32A /63A frame.
Robot Industrial Robot MELFA F Series RV-4F Magnetic Starter MS-T Series
High-speed, high-precision, high-function 4kg transportable vertical-multijoint robot Exceed your expectations.
Using the unique driving technology, higher-speed motion has been realized. 10A frame model is over 16% smaller with a width of just 36mm!!
Hand wiring and internal piping have contributed to enhanced tooling performance. New integrated terminal covers.
Expansion of the rotational axis motion range has enabled full utilization of the installation space. Reduce your coil inventory by up to 50%.
Adoption of flap-shape arm has realized an operational area suited to a compact area. Be certified to the highest international levels while work is ongoing to gain other country.
Production Specifications Product specifications
Degree of freedom of motion 6 Frame 10 A to 32 A
Structure Vertical multijoint type Applicable standards Certification to various standards including IEC, JIS, CE, UL, TÜV, CCC.
Installation posture Floor standing, hanging from the ceiling, hanging on the wall (with some restrictions on the motion range at J1) Terminal cover Standard terminal cover improves safety, simplifies ordering, and reduces inventory, etc.
Weight capacity 4kg Improved wiring Wiring and operability are improved with streamlining wiring terminal BC specifications.
Maximum reach diameter 515mm Operation coil rating Wide range of operation coil ratings reduces number of coil types from 14 (N Series) to 7 types and simplifies selection.
Cycle time (load weight) 0.36 sec. (1kg) Option units Diverse lineup includes Auxiliary Contact Unit, Operation Coil Surge Absorber Unit, Mechanical Interlock Unit.
Position repetition accuracy ±0.020mm
Protection specifications IP40 (Clean specification: ISO class 3, oil mist specification: IP67)
26 27