TE100-P1U

1 port USB 2.0 Print Server

Quick Installation Guide

Guide d'installation rapide du

serveur d'impression à 1 port USB 2.0

Druckserver mit 1 USB-2.0-Port

Kurzanleitung zur Installation

Guía de instalación rápida del

servidor de impresora con un puerto USB 2.0

Version 12.14.04

TRENDnet
TRENDware, USA
What's Next in Networking

Copyright
Downloaded from www.Manualslib.com ©2004.
manuals search engine All Rights Reserved. TRENDware International, Inc.
 Table of Contents
English ...................................................................................................... 1
1. Prepare for Installation ...................................................................... 1
2. Product Detail ..................................................................................... 2
3. Hardware Installation ........................................................................ 3
4. Configure the Print Server ................................................................ 4
5. Add the Network Printer to your PC .................................................. 8

Troubleshooting ........................................................................................ 11

Downloaded from www.Manualslib.com manuals search engine

 English QIG
1. Prepare for Installation
Thank you for purchasing TRENDnet's TE100-P1U 1-port USB 2.0 Print
Server.

This guide will help you set up your Print Server. Following the installations
should be quick and easy. If you run into problems, please refer to the
Troubleshooting section. If you need further technical support, please visit
www.TRENDNET.com or call technical support by phone.

Verify Package Contents

Please make sure you have everything in the box:

TE100-P1U
1 port USB 2.0 Print Server
Quick Installation Guide

Guide d'installation rapide du

serveur d'impression à 1 port USB 2.0

Druckserver mit 1 USB-2.0-Port

Kurzanleitung zur Installation

Guía de instalación rápida del

servidor de impresora con un puerto USB 2.0

Version 12.14.04

TRENDnet
TRENDware, USA
What's Next in Networking

Copyright ©2004. All Rights Reserved. TRENDware International, Inc.

TE100-P1U Quick Installation Guide

Driver CD-ROM Power Adapter (5 V, 2.5A)

Minimum System Requirements

1. Pentium 100Mhz or faster processor
2. 8MB RAM or more
3. Windows 95/98/NT/ME/2000/XP/2003, HP-UX, Sun O.S, Solaris, SCO Unix,
AIX, Unixware, Linux, Mac O.S.

Downloaded from www.Manualslib.com manuals search engine 1 English

 2. Product Detail

The Print Server has a RJ-45 connector, and 1 USB 2.0 port. It also has three
LEDS that indicate power, network activity, and printer activity.

Power Adapter Connector

USB Port
RJ-45 Connector

Network LED
Printer LED

Power LED

Downloaded from www.Manualslib.com manuals search engine 2 English

 3. Hardware Installation

1. Power off the Print Server and Printers.

2. Connect the Print Server's printer port to the printers.
3. Connect the RJ45 cable to the LAN port and to your network hub or switch.
4. Plug the AC power adapter into the power connector on the back of the Print
Server.
5. Power on the printer.

3
2

Downloaded from www.Manualslib.com manuals search engine 3 English

 4. Configure the Print Server

NOTE: For MAC Users, change your computers IP address to

192.168.0.X (where X is an available number from 1-253), and enter
192.168.0.1 in your web browser to access the Print Server's Web
Utility.

For Windows Users

1. Insert the TE100-P1U CD-ROM into your computer's CD-ROM drive.
2. Click Install Utility.

3. Click Next.

Downloaded from www.Manualslib.com manuals search engine 4 English

 4. Click Next.

5. Click Yes.

6. Click Finish.

Downloaded from www.Manualslib.com manuals search engine 5 English

 7. Double-click PS-Utility icon.

8. The utility will detect any available Print Servers on the network. Select the
Print Server you need to configure and click Change IP Address.

9. Type in the IP address that applies to your existing network. Type in the
Default Gateway (i.e. your router's local IP address).

Downloaded from www.Manualslib.com manuals search engine 6 English

 10. Click OK.

11. Click Show Web Setup.

12. Please take note and write down the Server Name and the Printer Name.

Print Server's configuration is now complete. For detail information, please

check the User's Guide that's included on the CD-ROM.

Downloaded from www.Manualslib.com manuals search engine 7 English

 5. Add the Network Printer to your PC

For Windows 95/98/ME/2000/XP

Note: If you are using Windows 95/98/ME, then make sure that
NETBEUI is installed before you follow the instructions below. If you are
using Windows 2000/XP, then you can simply add your printer using the
instructions below. For TCP/IP Printing instructions, please consult the
User’s Guide on the CD-ROM for details.

1. For Windows 2000/XP, Click Start Control Panel.

For Windows 95/98/ME, Click Start Settings Control Panel.
2. Double-Click the Printers and Faxes Icon.
3. Click or Double-Click Add Printer.
4. Click Next.

5. Select Network Printer option and click Next.

Downloaded from www.Manualslib.com manuals search engine 8 English

 6. Click the option that allows you to type the printer's name. Type the server
name and the printer name in the following format: \\server
name\printer_name. For example, type \\PS-184149\PS-184149-U1 with
NO SPACES in between them. Click Next.

7. Click OK.

8. Select the appropriate driver for your printer.

Downloaded from www.Manualslib.com manuals search engine 9 English

 9. Click Yes. Click Next.

10. Click Finish.

You have completed adding the printer to your PC. If there is more than 1
printer, please repeat the steps 1~10 until all printers are added to your PC.

Downloaded from www.Manualslib.com manuals search engine 10 English

 Troubleshooting

Q1: I cannot add a network printer after I typed the server name and printer name.
A1: Please double check your hardware connections. Make sure that your printer is connected properly
to the print server and your power adapter is connected properly to a power outlet. (See 3. Hardware
Installation)

Q2: I have double checked my hardware connections and have verified that everything is connected
properly, but I still cannot connect to my printer after I typed in the server name and printer name.
A2: Make sure that you are typing the correct printer name.

Q3: I verified that the hardware installation is correct and typed the correct printer name, but I still cannot
find the network printer.
A3: Make sure that the server name and printer name is entered correctly. There should be no spaces,
and the back slashes that separate the server name and printer name should be this, \\, instead of this, //.
(See 5. Add Network Printer).

Q4: I typed in the server name and printer name correctly and successfully installed the network printer. But
I can't print a test page.
A4: Make sure that the printer is online by turning the printer on. Make sure the power adapter of your
printer is properly connected to a power outlet.

Q5: I successfully added a network printer to my computer, and my printer is receiving power. I can also
print a test page, but I cannot print anything from Microsoft Word or other applications.
A5: Make sure to set the newly installed network printer to your default printer.

Q6: I configured my print server to automatically receive an IP Address from a DHCP server, and now I
cannot go into the print server's web utility.
A6: Open PS-Utility v2.00 (See 4. Configure the Print Server) to locate your Print Server's IP address.
For MAC users, press the Reset button at the back of the TE100-P1U, hold the button for 15 seconds,
release the button, and enter http://192.168.0.1 in a web browser to access the web utility feature.

Q7: I pressed the reset button and held it for 15 seconds. I also typed in http://192.168.0.1 in a web browser,
but I still cannot access my print server.
A7: Make sure to change your IP Address to 192.168.0.xxx where xxx is an available number between 2 to
253.

If you have any questions regarding the TE100-P1U 1-port USB 2.0 Print Server, please contact Trendware
Technical Support Department.

Certifications
This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received including interference that may cause undesired operation.

Downloaded from www.Manualslib.com manuals search engine 11

 TRENDnet
TRENDware, USA
What's Next in Networking

@
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDware’s website at http://www.TRENDNET.com

TRENDnet Technical Support

US/Canada Support Center European Support Center
Contact Contact
Telephone: 1(310) 626-6252 Telephone
Fax: 1(310) 626-6267 Deutsch : +49 (0) 6331 / 268-460
Email: [email protected] Français : +49 (0) 6331 / 268-461
Español : +49 (0) 6331 / 268-462
Tech Support Hours English : +49 (0) 6331 / 268-463
7:30am - 6:00pm Pacific Standard Time Italiano : +49 (0) 6331 / 268-464
Monday - Friday
Dutch : +49 (0) 6331 / 268-465
Fax: +49 (0) 6331 / 268-466
Tech Support Hours
8:00am - 6:00pm Middle European Time
Monday - Friday

TRENDware International, Inc.

3135 Kashiwa Street. Torrance, CA 90505
http://www.TRENDNET.com
Copyright
Downloaded from www.Manualslib.com ©2004.
manuals search engine All Rights Reserved. TRENDware International, Inc.