Manuals+ — User Manuals Simplified.

Shanghai Wanway Digital Technology S20 GPS Tracker User

Manual

Home » Shanghai Wanway Digital Technology » Shanghai Wanway Digital Technology S20 GPS Tracker User
Manual

Wantaway Digital Technology S20 GPS Tracker

User Manual

To ensure quick and correct usage, please read the instruction manual carefully before using it.
 Contents [ hide
1 Product introduction
1.1 Specification
1.2 Device Dimension
1.3 Accessories
1.4 Overview
2 Installation
3 LED Indicator
4 Device features list
5 Access to platform
6 Precautions
7 Solutions to common
problems
8 Warranty policy
9 Warranty Card
10 Documents / Resources
11 Related Posts

Product introduction

Specification

Item Parameter

GSM Frequency 850/1900MHz

Supported location method BDS/GPS/ LBS

Location Accuracy 10m

Light Alarm Yes

Device Dimension 80x50x32mm

Battery Volume 5800mAh

Working Voltage 3.7V

Working Temperature -25 to+85

Weight 227g

Device Dimension
Accessories

Device 1

Charger 1

Cable Power 1

User Manual 1

Certificate Of Competency 1

Overview
 Find the notch and open the device casing

Open the SIM Card shell, insert the SIM Card in the right direction as follows:
Attention: Make sure the device is shut down already, then insert SIM Card

LED Indicator
Power on and Power off
Power on Long press the switch for more than 3 seconds, the main LED indicator quick flashing, which means
working normally, then the LED indicator is extinguished, which means the device enters sleep working mode.
Charging
Open the device silicone plug, connect to external power, red LED indicator long light means device charging,
power LED slow flashing means device full charged.

Installation

1. Check Device
Check device shell and its accessories before installation
2. Install the device
A. Waterproof: Please choose somewhere is waterproof.
Be careful to let the device stay away from the air conditioning outlet to prevent condensate water from
accumulating, which can avoid damaging the service life of the product. B.Shakeproof: Do not install the device
in a position with a large vibration amplitude.
C. Tamper-proof: GPS devices should be away from electronic equipment to prevent signal interference.

3. Installation Precautions
Device magnetic cannot touch somewhere high temperature, for example, car exhaust pipe otherwise will
make magnetic useless.
Please do the payment for the SIM Card per month or per year continuously, the device cannot be used if
overdue.
Device should be tested after the first installation.
The strong magnetic on the back of the device cannot touch the hard disk digital products, which will cause
 damage to the hard disk. If any questions, please contact us for help.

LED Indicator

LED Indicator LED Indicator Status

Long Light: External power supply is charging

Slowly blinking: Power supply or battery full charged

Power LED indicator (Re
d)
Quickly blinking: Low backup battery

No light: LED Indicator is broken or in sleeping mode

Quickly blinking: GSM initialization

GSM LED Indicator (Yell

Slowly blinking: GSM received a normal signal
ow)

No Light: Sleeping mode or no GSM internet

Quickly blinking: Searching signal

Location LED indicator (

Slowly blinking: Signal normal
Blue)

No light: GPS in sleep mode or abnormal working

Device features list

 Main features Description

SOS set or delete 3 SOS numbers can be set or deleted

Over-speed alarm You will receive an alarm if over-speed

The SOS number dials the phone number on the device and immediately
Voice monitoring enters the monitoring state. (note: this function can only be supported by a
voice card)

Geo-fence You will receive an alarm if GPS drives out somewhere limited

You will receive a shock alarm when the car is shocked after turning on its d
Shock alarm
efensive state.

Low battery alarm You will receive a low battery alarm once turn on the low battery notification

Unit set in seconds, default is 10 seconds to locate, which is the most accur
Intelligent
ate model, G-SENSOR control GPS working at the end, working 4 minutes
power-saving mode
each time.

Time interval The unit of time is minutes, and a range of 5-1440 minutes can be set for re
working mode porting

When no GPS or BDS signal is found, the base station is automatically start
GPS/BDS
ed for positioning

Cut-wire alarm Light detection oil dark to light to achieve the alarm dismantling

Free installation Strong magnetic, free of installation

Access to platform

Platform(wanwaygps.com) •Android and IOS APP Trackway

There are two methods to login into the platform or app.

1. Log in by IMEI number(the 15 digits on the back of the device), password: the last 6 digits of the IMEI number.
2. Contact the supplier to create an account for you.

Precautions

Device warranty not including the damage of human factor.

Do not put the device or its built-in battery in water or fire, do not bend or open the battery.
Do not disassemble the device, which may cause damage to the device due to unprofessional handing.
Solutions to common problems

Please contact sales when you cannot handle problems.

Common
Fault description Solutions
problem

Some poor signal areas like basements and

tunnels are not able to acquire GPS Move device to open sky areas.
signals.
Poor signal
Device cannot acquire GPS signal if placed
Please put it in the correct direction or cha
face down or above with metal material lay
nge the installation position
er shielding

Unable to
The backup battery used up Fully charged before using
boot

Cannot connect inte Please contact the SIM Card operator to c

SIM Card no data service
rnet heck the data service

Warranty policy

Special statement
This product is subject to any technical change without prior notice. Product appearance and color are subject to
the real product.

Replacement policy
We can replace a new one for you if the device is not damaged by the human factor.

Warranty Card

Customers Data

Customers Name Telephone

Address

Model Type IMEI number

Purchase Data Invoice No

Company Address

Please reserve the warranty card carefully

FCC Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference,and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC Radiation Exposure Statement:

 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Documents / Resources

Shanghai Wanway Digital Technology S20 GPS Tracker [pdf] User Manual
S20, 2AWBA-S20, 2AWBAS20, S20 GPS Tracker, S20, GPS Tracker

Manuals+, home privacy