Scribd
Upload
5 views

BIOS and EC update method

This document provides instructions for updating the BIOS and EC of a product, including steps for both Windows and Shell methods. Users are advised to download the latest BIOS and EC files from the official website and follow specific procedures to ensure successful updates. Important notes include not interrupting the power during the update process and configuring BIOS settings appropriately.

Uploaded by

Constellation Underground
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

BIOS and EC update method

This document provides instructions for updating the BIOS and EC of a product, including steps for both Windows and Shell methods. Users are advised to download the latest BIOS and EC files from the official website and follow specific procedures to ensure successful updates. Important notes include not interrupting the power during the update process and configuring BIOS settings appropriately.

Uploaded by

Constellation Underground
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

How to update BIOS and EC

*Check your product model and download the latest BIOS and EC files from the official website.*
The product you purchased and the product model can be seen at the bottom (below picture)
For example, the product model below is B100

Please go to the official website support page to download the BIOS or EC file.
web address：https://www.bosgamepc.com/pages/bios-download-center
Windows update method
【Update Method】indicates the runnable file and platform.（windows or Shell）
Example: Model B95/B100.
BIOS: The downloaded file is DNB20_B95_BIOS.zip, after unzip, please double click and run
"F.bat" to start auto update BIOS.

Run the file as follows; please click on "More info", then mouse click on "Run anyway".

As shown in the picture, the BIOS is starting to be flashed


(Note: Please do not cut off the power and move any devices during this process)

After updating the BIOS, please press "ESC" or "DEL" to enter the BIOS page, and then press
"F3" or "F9" to confirm loading the default settings.
EC ：The downloaded file is WIN EC-DNB20-1.09.zip, after unzip, please double click and
run "FEC.bat" to start the automatic update of EC.
Run the file as follows; please click on "More info", then mouse click on "Run anyway".

As shown in the picture below, the EC is starting to be flashed


(Note:Please do not cut off the power and move any devices during this process)
“Shell” update method
1. Prepare a USB drive
2. Download the "rufus" software tool
https://www.mediafire.com/file_premium/lx6xq4lhdx4tuti/rufus-4.2p.exe/file
3. Run rufus to format the disk as "FAT32".

4. Unzip the downloaded file and copy it to a USB flash drive


(as shown in the picture below, including the EFI file)

5. Press the "ESC" or "DEL" key to enter the BIOS，


[Security]→[Secure Boot]→Secure Boot [Enabled] change to [Disabled] ,
Please save and exit
6. Plug in the USB flash disk and press "F7" to select the USB flash disk to boot into the Shell.

7. The program automatically flashes the BIOS or EC


(Note: Do not turn off the power or move any equipment during this process).

please wait patiently for the update to complete。


*8* If your page does not automatically run the BIOS or EC flashing , but jumps to the following page
8.1 In this interface, enter the command to find the U disk: enter "fs0:" Enter, then enter
"dir" to enter, compare the file is your U disk file, if not, fs1, fs2, fs3 ......Try again.Until you
see this BIOS or EC file
8.2 Then input: “type XXX.NSH” ,Press “Enter”,
8.3 Until this interface appears: updated BIOS or EC Rom successfully! and finall

You might also like