GHAZIABAD TESTING LABORATORIES PVT. LTD.

, AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT

Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 1 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Permanent Testing
1 BIOLOGICAL- WATER Drinking Water Detection of Coliform IS 15185
2 BIOLOGICAL- WATER Drinking Water Detection of E. coli IS 15185
3 BIOLOGICAL- WATER Ground water/ Surface Water Detection of Coliform IS 15185
4 BIOLOGICAL- WATER Ground water/ Surface Water Detection of E. coli IS 15185
5 BIOLOGICAL- WATER Packaged Drinking Water Detection of Coliform IS 15185
6 BIOLOGICAL- WATER Packaged Drinking Water Detection of E. coli IS 15185
7 BIOLOGICAL- WATER Packaged Natural Mineral Water Detection of Coliform IS 15185
8 BIOLOGICAL- WATER Packaged Natural Mineral Water Detection of E. coli IS 15185
CHEMICAL-
IS: 5182 (Part 25) Cl 1 to
9 ATMOSPHERIC Ambient Air Ammonia as NH3
9
POLLUTION
CHEMICAL-
GTL/CHEM/ENVSOP-58,
10 ATMOSPHERIC Ambient Air Arsenic as As
Issue No.-01, 08.11
POLLUTION
CHEMICAL-
Fine Particulate Matter
11 ATMOSPHERIC Ambient Air IS: 5182 (Part 24)
(PM 2.5)
POLLUTION
CHEMICAL-
Hydrogen Sulphide (as
12 ATMOSPHERIC Ambient Air IS: 5182 (Part 07)
H2S)
POLLUTION
CHEMICAL-
13 ATMOSPHERIC Ambient Air Lead as Pb IS: 5182 (Part 22)
POLLUTION
CHEMICAL-
14 ATMOSPHERIC Ambient Air Nickel as Ni IS: 5182 (Part 26)
POLLUTION
CHEMICAL-
Oxides of Nitrogen as IS: 5182 (Part 6) Cl 1 to
15 ATMOSPHERIC Ambient air
(NO2) 13
POLLUTION
CHEMICAL-
IS: 5182 (Part 9) Cl 1 to
16 ATMOSPHERIC Ambient Air Ozone as O3
10
POLLUTION

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 2 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
IS: 5182 (Part 23) Cl 1 to
17 ATMOSPHERIC Ambient Air Particulate Matter (PM-10)
10
POLLUTION
CHEMICAL-
18 ATMOSPHERIC Ambient Air Sulphur Dioxide as (SO2) IS: 5182 (Part 2) Cl 1to 7
POLLUTION
CHEMICAL-
19 ATMOSPHERIC Ambient Noise Level Ambient Noise IS:9989
POLLUTION
CHEMICAL-
20 ATMOSPHERIC Source Noise Level Source Noise IS:4758
POLLUTION
CHEMICAL-
IS: 11255 (Part 6) Cl 1 to
21 ATMOSPHERIC Stack emission Ammonia as NH3
4
POLLUTION
CHEMICAL-
Hydrogen Sulphide as
22 ATMOSPHERIC Stack emission IS: 11255(Part 4) Cl 1 to 8
H2S
POLLUTION
CHEMICAL-
IS: 11255 (Part 7) Cl 1 to
23 ATMOSPHERIC Stack emission Oxide of Nitrogen (NOX)
7
POLLUTION
CHEMICAL-
24 ATMOSPHERIC Stack emission Particulate Matter as (PM) IS:11255 (Part 1)Cl 1 to 5
POLLUTION
CHEMICAL-
IS: 11255 (Part 2) C 1 to
25 ATMOSPHERIC Stack emission Sulphur Dioxide as (SO2)
11
POLLUTION
CHEMICAL- BUILDING IS 9103 , Cl 9 Table-2
26 Concrete Admixture Ash Content
MATERIAL Annexure E,
CHEMICAL- BUILDING
27 Concrete Admixture Chloride Ion Content IS 6925 Cl 3 to 5
MATERIAL
CHEMICAL- BUILDING IS 9103 Cl 9, Table 2
28 Concrete Admixture Dry Material Content
MATERIAL Annexure-E
CHEMICAL- BUILDING IS 9103 Cl 9, Table-2
29 Concrete Admixture pH Value
MATERIAL Annexure-E,

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 3 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- BUILDING IS 9103 Cl 9, Table-2

30 Concrete Admixture Relative Density
MATERIAL Annexure-E,
CHEMICAL- BUILDING
31 Ordinary Portland Cement Alkali Content IS 4032: Cl 4.12
MATERIAL
CHEMICAL- BUILDING
32 Ordinary Portland Cement Alumina IS:4032: Cl 4.4 and 4.6
MATERIAL
CHEMICAL- BUILDING
33 Ordinary Portland Cement Calcium Oxide IS 4032 Cl 4.7
MATERIAL
CHEMICAL- BUILDING IS 4032 Cl 4.13
34 Ordinary Portland Cement Chloride Content
MATERIAL Amendment- 2
CHEMICAL- BUILDING
35 Ordinary Portland Cement Ferric Oxide IS 4032 Cl 4.4
MATERIAL
CHEMICAL- BUILDING
36 Ordinary Portland Cement Insoluble Residue IS 4032 ,Cl 4.10
MATERIAL
CHEMICAL- BUILDING
37 Ordinary Portland Cement Loss of Ignition IS 4032 ,Cl 4.2
MATERIAL
CHEMICAL- BUILDING
38 Ordinary Portland Cement Magnesium Oxide IS 4032 , Cl 4.8
MATERIAL
CHEMICAL- BUILDING
39 Ordinary Portland Cement Silica IS 4032 ,Cl 4.3
MATERIAL
CHEMICAL- BUILDING
40 Ordinary Portland Cement Sulphuric Anhydride IS 4032 Cl 4.9
MATERIAL
CHEMICAL- BUILDING
41 Portland Pozzolana Cement ,Fly Ash Based Alkali Content IS 4032: Cl 4.12
MATERIAL
CHEMICAL- BUILDING IS 4032: Cl 4.13 ,
42 Portland Pozzolana Cement ,Fly Ash Based Chloride Content
MATERIAL Amendment :2
CHEMICAL- BUILDING
43 Portland Pozzolana Cement ,Fly Ash Based Insoluble Residue IS 4032:, Cl 4.10
MATERIAL
CHEMICAL- BUILDING
44 Portland Pozzolana Cement ,Fly Ash Based Loss of Ignition IS 4032: Cl 4.2
MATERIAL
CHEMICAL- BUILDING
45 Portland Pozzolana Cement ,Fly Ash Based Magnesia IS 4032; Cl 4.8
MATERIAL

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 4 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- BUILDING
46 Portland Pozzolana Cement ,Fly Ash Based Total Sulphur IS 4032:Cl 6.12
MATERIAL
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in Available Alkalies IS 3812 (P-1) : Annexure
47
MATERIAL cement mortar and concrete equivalent Sodium Oxide C
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in
48 Loss of Ignition IS 1727 Cl 5.3
MATERIAL cement mortar and concrete
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in
49 Magnesium Oxide IS 1727-1967 Cl 5.9
MATERIAL cement mortar and concrete
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in IS 3812 (P-1) Cl 6,
50 Reactive Silica
MATERIAL cement mortar and concrete Table-1, Annexure-B ,
CHEMICAL- BUILDING Pulverized Fuel Ash for Use as Pozzolana in
51 Silicon Dioxide IS 1727 , Cl 5.4
MATERIAL cement mortar and concrete
Silicon
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in
52 Dioxide+Aluminum Oxide IS 1727 Cl 5.4 &,5.6 & 5.7
MATERIAL cement mortar and concrete
+ Iron Oxide
IS 3812 (P-1) 2013, Cl 5.1
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in
53 Total Chloride and 6.1, Table-1, IS 4032
MATERIAL cement mortar and concrete
Cl 4.13, amendment;2
CHEMICAL- BUILDING Pulverized Fuel Ash for use as Pozzolana in Total Sulphur as Sulphur
54 IS 1727 Cl 5.10
MATERIAL cement mortar and concrete Trioxide (as SO 3)
IS 4027 (P-1) 1987 Cl 3 to
CHEMICAL- METALS &
55 Code For designation Of Copper & Copper Alloys Copper 4.5, IS 3685:1966 Cl 3 to
ALLOYS
5.4, IS 440:1964 Cl 4
CHEMICAL- METALS &
56 Code For designation Of Copper & Copper Alloys Iron BS EN 15079 Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
57 Code For designation Of Copper & Copper Alloys Lead BS EN 15079, C 5 to 9
ALLOYS
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip,
58 Tungsten ASTM E 415-21
ALLOYS for Cold Forming and Drwaing Purposes
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip,
59 Aluminium ASTM E 415-21
ALLOYS for Cold Forming and Drawing Purposes
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
60 Molybdenum
ALLOYS for Cold Forming and Drawing Purposes ASTM E 415-21

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 5 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
61 Silicon
ALLOYS for Cold Forming and Drawing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,ASTM
62 Carbon
ALLOYS for Cold Forming and Drwaing Purposes E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811 Cl 1.1, ASTM
63 Chromium
ALLOYS for Cold Forming and Drwaing Purposes E415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
64 Copper
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
65 Lead
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
66 Manganese
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
67 Nickel
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
68 Niobium
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl. 1.1,
69 Phosphorus
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
70 Tin
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
71 Titanium
ALLOYS for Cold Forming and Drwaing Purposes ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998, Cl 1.1,
72 Tungsten
ALLOYS for Cold Forming and Drwaing Purposes ASTM E415
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip,
73 Vanadium ASTM E415-21
ALLOYS for Cold Forming and Drwaing Purposes
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
74 Boron
ALLOYS for Cold Forming and Drwaing Purposes r ASTM E415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811 :1998 Cl 1.1,
75 Cobalt
ALLOYS for Cold Forming and Drwaing Purposes r ASTM E 415-21
CHEMICAL- METALS & Cold Reduced Low Carbon Steel Sheet and Strip, IS 8811:1998 Cl 1.1,
76 Sulphur
ALLOYS for Cold Forming and Drwaing Purposes r ASTM E 415-21

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 6 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- METALS &

77 Copper Bismuth IS 440 Cl 7 to 7.4
ALLOYS
CHEMICAL- METALS &
78 Copper Copper IS 440 Cl 4 to 4.1
ALLOYS
GTL/SOP/CU/Chem/01-02
CHEMICAL- METALS &
79 Copper Lead Issue No 1:2017, IS 440:Cl
ALLOYS
9 to 9.5
CHEMICAL- METALS &
80 Copper Oxygen IS 440 Cl 13 to 13.4
ALLOYS
CHEMICAL- METALS & GTL/SOP/CU/Chem/01-02
81 Copper Silver
ALLOYS Issue No 1
CHEMICAL- METALS &
82 Copper & Copper Alloys Bismuth BS EN 15079 Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
83 Copper & Copper Alloys Aluminium BS EN 15079 Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
84 Copper & Copper Alloys Arsenic BS EN 15079, Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
85 Copper & Copper Alloys Cadmium BS EN 15079, Cl 5 to 9
ALLOYS
CHEMICAL- METALS & IS 3685 Cl 7 to 7.4, BS EN
86 Copper & Copper Alloys Manganese
ALLOYS 15079 Cl 5 to 9
CHEMICAL- METALS &
87 Copper & Copper Alloys Nickel BS EN 15079 Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
88 Copper & Copper Alloys Phosphorus BS EN 15079 Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
89 Copper & Copper Alloys Silicon BS EN 15079 C 5 to 9
ALLOYS
CHEMICAL- METALS &
90 Copper & Copper Alloys Silver BS EN 15079 Cl 5 to 9
ALLOYS
CHEMICAL- METALS &
91 Copper & Copper Alloys Tin BS EN 15079 Cl 5 to 9
ALLOYS
IS 3685 Cl 13, IS 4027
CHEMICAL- METALS &
92 Copper & Copper Alloys Zinc (Part-6) Cl 4 to 4.4, BS EN
ALLOYS
15079 Cl 5 to 9

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 7 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- METALS & Hot Rolled Medium and High Tensile Structural IS 228 (P-1) ,Cl 4.5, 5.1,
93 Carbon
ALLOYS Steel 5.5, 5.6, 5.8, 6.4, 6.7
CHEMICAL- METALS & Hot Rolled Medium and High Tensile Structural
94 Manganese IS 228 (P-2) Cl 4 & 5
ALLOYS Steel
CHEMICAL- METALS & Hot Rolled Medium and High Tensile Structural
95 Phosphorus IS 228 (P-3) Cl 4, 5, 6, & 8
ALLOYS Steel
CHEMICAL- METALS & Hot Rolled Medium and High Tensile Structural
96 Silicon IS 228 (P-8) Cl 4
ALLOYS Steel
CHEMICAL- METALS & Hot Rolled Medium and High Tensile Structural
97 Sulphur IS 228 (P-9)Cl 4 & 5
ALLOYS Steel
IS 228 (P-6) 1987 Cl 6 to
CHEMICAL- METALS &
98 Stainless Steel Plates, Sheets and Strips Chromium 7.1, IS 9879:1998 Cl 4 to
ALLOYS
12, ASTM E1086-22 Cl 1.1
CHEMICAL- METALS & IS 9879:1998 Cl 4 to 12,
99 Stainless Steel Plates, Sheets and Strips Manganese
ALLOYS ASTM E1086-22 Cl 1.1
CHEMICAL- METALS & IS 9879:1998 Cl 4 to 12,
100 Stainless Steel Plates, Sheets and Strips Carbon
ALLOYS ASTM E 1086-22 Cl 1.1
CHEMICAL- METALS & IS 9879:1998 Cl 4 to 12,
101 Stainless Steel Plates, Sheets and Strips Copper
ALLOYS ASTM E1086-22 Cl 1.1
IS 228 (P-7) 1987 Cl 5.3 to
CHEMICAL- METALS &
102 Stainless Steel Plates, Sheets and Strips Molybdenum 6, IS 9879:1998 Cl 4 to
ALLOYS
12, ASTM E1086-22 Cl 1.1
IS 228 (P-5) 1987 Cl 6 to
CHEMICAL- METALS &
103 Stainless Steel Plates, Sheets and Strips Nickel 6.7, IS 9879: 1998 Cl 4 to
ALLOYS
12, ASTM E1086 Cl 1.1
CHEMICAL- METALS & IS 9879:1998 Cl 4 to 12,
104 Stainless Steel Plates, Sheets and Strips Phosphorus
ALLOYS ASTM E1086-22 Cl 1.1
CHEMICAL- METALS & IS 9879:1998 Cl 4 to 12,
105 Stainless Steel Plates, Sheets and Strips Silicon
ALLOYS ASTM E1086-22 Cl 1.1
CHEMICAL- METALS & IS 9879:1998 Cl 4 to 12,
106 Stainless Steel Plates, Sheets and Strips Sulphur
ALLOYS ASTM E1086-22 Cl 1.1
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
107 Rods and Sections (for General Engineering Chromium ASTM E1251-17a
ALLOYS
Purposes)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 8 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Wrought Aluminium and Aluminium Alloy Bars,

CHEMICAL- METALS &
108 Rods and Sections (for General Engineering Copper ASTM E1251:17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
109 Rods and Sections (for General Engineering Iron ASTM E 1251:17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
110 Rods and Sections (for General Engineering Lead ASTM E 1251:17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
111 Rods and Sections (for General Engineering Magnesium ASTM E1251-17a Cl 1.1
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
112 Rods and Sections (for General Engineering Manganese ASTM E1251-17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
113 Rods and Sections (for General Engineering Nickel ASTM E1251-17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
114 Rods and Sections (for General Engineering Silicon ASTM E1251-17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
115 Rods and Sections (for General Engineering Tin ASTM E1251-17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
116 Rods and Sections (for General Engineering Titanium ASTM E1251-17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
117 Rods and Sections (for General Engineering Vanadium ASTM E1251-17a
ALLOYS
Purposes)
Wrought Aluminium and Aluminium Alloy Bars,
CHEMICAL- METALS &
118 Rods and Sections (for General Engineering Zinc ASTM E1251-17a
ALLOYS
Purposes)
CHEMICAL-
119 POLLUTION & Soil/ Sediment Arsenic as As USEPA 6020B (SW- 846)
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 9 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
120 POLLUTION & Soil/Sediment Aluminum as Al USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
121 POLLUTION & Soil/Sediment Arsenic as As USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
122 POLLUTION & Soil/Sediment Available Nitrogen IS:14684 Cl 1 to 3,
ENVIRONMENT
CHEMICAL-
123 POLLUTION & Soil/Sediment Available Phosphorous ISO 11263 (E)
ENVIRONMENT
CHEMICAL-
124 POLLUTION & Soil/Sediment Barium as Ba USEPA 6020B (SW-846)
ENVIRONMENT
CHEMICAL-
125 POLLUTION & Soil/Sediment Boron as B USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
126 POLLUTION & Soil/Sediment Bulk Density GTL/CHEM/ENV/SOP-34
ENVIRONMENT
CHEMICAL-
127 POLLUTION & Soil/Sediment Cadmium as Cd USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
128 POLLUTION & Soil/Sediment Calcium as Ca USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
Calcium Carbonate as
129 POLLUTION & Soil/Sediment IS:2720 (P-23)
CaCO3
ENVIRONMENT
CHEMICAL-
130 POLLUTION & Soil/Sediment Chloride as Cl GTL/CHEM/ENV/SOP-41
ENVIRONMENT
CHEMICAL-
131 POLLUTION & Soil/Sediment Chromium as Cr USEPA 6020B (SW- 846)
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 10 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
132 POLLUTION & Soil/Sediment Colour GTL/CHEM/ENV/SOP-48
ENVIRONMENT
CHEMICAL-
133 POLLUTION & Soil/Sediment Copper as Cu USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
Electrical Conductivity
134 POLLUTION & Soil/Sediment IS:14767
(EC)
ENVIRONMENT
CHEMICAL-
135 POLLUTION & Soil/Sediment Iron as Fe USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
136 POLLUTION & Soil/Sediment Lead as Pb USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
137 POLLUTION & Soil/Sediment Magnesium as Mg USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
138 POLLUTION & Soil/Sediment Manganese as Mn USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
139 POLLUTION & Soil/Sediment Mercury as Hg USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
140 POLLUTION & Soil/Sediment Moisture IS 2720 (Part-02)
ENVIRONMENT
CHEMICAL-
141 POLLUTION & Soil/Sediment Molybdenum as Mo USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
142 POLLUTION & Soil/Sediment Nickel as Ni USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
143 POLLUTION & Soil/Sediment Organic Carbon IS:2720 (P-22)
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 11 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
144 POLLUTION & Soil/Sediment Organic matter IS:2720 (P-22)
ENVIRONMENT
CHEMICAL-
145 POLLUTION & Soil/Sediment pH IS: 2720 (P-26)
ENVIRONMENT
CHEMICAL-
146 POLLUTION & Soil/Sediment Porosity GTL/CHEM/ENV/SOP-52
ENVIRONMENT
CHEMICAL-
147 POLLUTION & Soil/Sediment Potassium as K IS: 9497
ENVIRONMENT
CHEMICAL-
148 POLLUTION & Soil/Sediment Potassium as K USEPA 6010C (SW- 846)
ENVIRONMENT
CHEMICAL-
149 POLLUTION & Soil/Sediment Selenium as Se USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
150 POLLUTION & Soil/Sediment Silver as Ag USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
Sodium Absorption Ratio
151 POLLUTION & Soil/Sediment GTL/CHEM/ENV/SOP- 46
as SAR
ENVIRONMENT
CHEMICAL-
152 POLLUTION & Soil/Sediment Sodium as Na USEPA 6010C
ENVIRONMENT
CHEMICAL-
153 POLLUTION & Soil/Sediment Texture GTL/CHEM/ENV/SOP-45
ENVIRONMENT
CHEMICAL-
154 POLLUTION & Soil/Sediment Total Nitrogen IS:14684 Cl 1 to 3
ENVIRONMENT
CHEMICAL-
IS:2720 (P-21)1977,Cl 1
155 POLLUTION & Soil/Sediment Total Soluble Solid
to 3
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 12 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
Total Soluble Sulphate as IS :2720 (Part 27) Cl 3 to
156 POLLUTION & Soil/Sediment
SO 4 4
ENVIRONMENT
CHEMICAL-
157 POLLUTION & Soil/Sediment Vanadium as V USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
Water Holding Capacity
158 POLLUTION & Soil/Sediment GTL/CHEM/ENV/SOP-35
as WHC
ENVIRONMENT
CHEMICAL-
159 POLLUTION & Soil/Sediment Zinc as Zn USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
IS 3025 :(Part 34) Cl 1 to
160 POLLUTION & Waste Water Ammonical Nitrogen
2
ENVIRONMENT
CHEMICAL-
Anionic Detergents as APHA 5540 (C)23rd
161 POLLUTION & Waste Water
MBAS Edition
ENVIRONMENT
CHEMICAL-
Anionic Detergents as
162 POLLUTION & Waste Water IS 3025 (Part 68)
MBAS
ENVIRONMENT
CHEMICAL- Biological Oxygen
IS 3025: (Part 44) Cl 1 to
163 POLLUTION & Waste Water Demand (BOD) at 27 oC
12
ENVIRONMENT for 3days
CHEMICAL-
164 POLLUTION & Waste Water Boron as B IS 3025 (Part 57) Cl 1 to 6
ENVIRONMENT
CHEMICAL-
IS 3025:(Part -40) Cl 1 to
165 POLLUTION & Waste Water Calcium as Ca
5
ENVIRONMENT
CHEMICAL-
Chemical Oxygen IS: 3025 (Part 58) Cl 1 to
166 POLLUTION & Waste Water
Demand (COD) 10
ENVIRONMENT
CHEMICAL-
IS 3025: (Part 32) Cl 1 to
167 POLLUTION & Waste Water Chloride as Cl
2
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 13 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
Chromium (Hexavalent) IS 3025: (Part 52) Cl 1 to
168 POLLUTION & Waste Water
as Cr+6 6
ENVIRONMENT
CHEMICAL-
169 POLLUTION & Waste Water Chromium as Cr+6 IS 3025 (Part 52) Cl 1 to 6
ENVIRONMENT
CHEMICAL-
170 POLLUTION & Waste Water Colour IS 3025 :(Part 4)
ENVIRONMENT
CHEMICAL-
171 POLLUTION & Waste Water Dissolved Oxygen (DO) IS 3025:(Part 38) Cl 1 to 5
ENVIRONMENT
CHEMICAL-
APHA 4500 (F) 23rd
172 POLLUTION & Waste Water Fluoride as F
Edition
ENVIRONMENT
CHEMICAL-
173 POLLUTION & Waste Water Fluoride as F IS 3025:(Part 60) Cl 5
ENVIRONMENT
CHEMICAL-
APHA 3125 (B) 23rd
174 POLLUTION & Waste Water Magnesium as Mg
Edition
ENVIRONMENT
CHEMICAL-
IS 3025:(Part 46) 1994, Cl
175 POLLUTION & Waste Water Magnesium as Mg
6, Reaffirmed
ENVIRONMENT
CHEMICAL-
176 POLLUTION & Waste Water Nitrate as NO3 IS 3025: (Part 34)Cl 3
ENVIRONMENT
CHEMICAL-
177 POLLUTION & Waste Water Odor IS 3025:(Part-5)Cl 1 to 3
ENVIRONMENT
CHEMICAL-
178 POLLUTION & Waste Water Odour IS 3025:(Part-6) Cl 5 to 8
ENVIRONMENT
CHEMICAL-
179 POLLUTION & Waste Water pH IS 3025: (Part-11) Cl 1to 2
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 14 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
180 POLLUTION & Waste Water Phenolic Compound IS 3025: (Part 43)Cl 1 to 6
ENVIRONMENT
CHEMICAL-
181 POLLUTION & Waste Water Phosphorus as P/PO4 IS 3025:(Part-31) Cl 1 to 4
ENVIRONMENT
CHEMICAL-
IS 3025 (Part -26) :1986,
182 POLLUTION & Waste Water Residual Chlorine
Cl 1 to 3
ENVIRONMENT
CHEMICAL-
183 POLLUTION & Waste Water Specific Conductivity IS 3025 (Part 14)
ENVIRONMENT
CHEMICAL-
IS 3025: (Part 24) Cl 1 to
184 POLLUTION & Waste Water Sulphate as SO4 / SO3
4
ENVIRONMENT
CHEMICAL-
185 POLLUTION & Waste Water T. Alkalinity / P. Alkalinity IS 3025: (Part 23)Cl 1 to 9
ENVIRONMENT
CHEMICAL-
Total Dissolved Solids IS: 3025 (Part-16) Cl 1 to
186 POLLUTION & Waste Water
(TDS) 8
ENVIRONMENT
CHEMICAL-
187 POLLUTION & Waste Water Total Hardness IS 3025: (Part-21)Cl 1 to 7
ENVIRONMENT
CHEMICAL-
Total Kjeldahi
188 POLLUTION & Waste Water IS 3025 :(Part 34)Cl 1 to 5
Nitrogen(TKN)
ENVIRONMENT
CHEMICAL-
IS 3025: (Part-17) Cl 1 to
189 POLLUTION & Waste Water Total Suspended Solids
5
ENVIRONMENT
CHEMICAL-
190 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Aluminum as Al USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
191 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Available Nitrogen GTL/CHEM/ENV/SOP-50
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 15 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
Available Phosphorous as
192 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) ISO 11263 (E)
P
ENVIRONMENT
CHEMICAL-
193 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Boron as B USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
194 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Bulk Density GTL/CHEM/ENV/SOP-34
ENVIRONMENT
CHEMICAL-
195 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Calcium as Ca USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
196 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Chloride as Cl GTL/CHEM/ENV/SOP-41
ENVIRONMENT
CHEMICAL-
197 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Chromium as Cr USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
198 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Color GTL/CHEM/ENV/SOP-48
ENVIRONMENT
CHEMICAL-
USEPA 6020B (SW- 846)
199 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Copper as Cu
ICPMS
ENVIRONMENT
CHEMICAL-
200 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Iron as Fe USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
201 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Lead as Pb USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
202 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Loss of ignition as LOI GTL/CHEM/ENV/SOP-49
ENVIRONMENT
CHEMICAL-
203 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Magnesium as Mg USEPA 6020B (SW- 846)
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 16 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
204 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Manganese as Mn USEPA 6020B (SW-846)
ENVIRONMENT
CHEMICAL-
205 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Mercury as Hg USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
206 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Molybdenum as Mo USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
207 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Nickel as Ni USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
USEPA 6010C (SW- 846)
208 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Potassium as K
ICPMS,
ENVIRONMENT
CHEMICAL-
209 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Selenium as Se USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
210 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Silver as Ag USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
211 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Sodium as Na IS 9497
ENVIRONMENT
CHEMICAL-
212 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Sodium as Na USEPA 6010C (SW- 846)
ENVIRONMENT
CHEMICAL-
213 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Texture GTL/CHEM/ENV/SOP-45
ENVIRONMENT
CHEMICAL-
214 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Total Nitrogen GTL/CHEM/ENV/SOP-50
ENVIRONMENT
CHEMICAL-
215 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Vanadium as V USEPA 6020B (SW- 846)
ENVIRONMENT

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 17 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL-
216 POLLUTION & Wastes(Liquid, Slurry/ Sludge/Solids/Semi Solids) Zinc as Zn USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL-
217 POLLUTION & Wastes(Liquid/Slurry/Sludge/ Solid/Semi-Solid) Cadmium as Cd USEPA 6020B (SW- 846)
ENVIRONMENT
CHEMICAL- RESIDUES
218 Drinking Water Aluminum as Al IS 3025 (Part 55)
IN WATER
CHEMICAL- RESIDUES
219 Drinking Water Antimony IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
220 Drinking Water Barium as Ba
IN WATER Edition
CHEMICAL- RESIDUES
221 Drinking Water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
222 Drinking Water Boron as B IS 3025 (Part 57)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B)23rd
223 Drinking Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES
224 Drinking Water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
225 Drinking Water Chromium as Cr IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
226 Drinking Water Chromium as Cr+6 IS 3025 (Part 52)
IN WATER
CHEMICAL- RESIDUES
227 Drinking Water Cobalt IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B)23rd
228 Drinking Water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
229 Drinking Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
230 Drinking Water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES
231 Drinking Water Lead as Pb IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 18 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
232 Drinking Water Lead as Pb APHA 3125(B)23rd Edition
IN WATER
CHEMICAL- RESIDUES APHA 3500 Mg - B, 23rd
233 Drinking Water Magnesium as Mg
IN WATER Edition
CHEMICAL- RESIDUES
234 Drinking Water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
235 Drinking Water Mercury as Hg IS 3025 (Part 48)
IN WATER
CHEMICAL- RESIDUES
236 Drinking Water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125(B) 23rd
237 Drinking Water Molybdenum as Mo
IN WATER Edition
CHEMICAL- RESIDUES
238 Drinking Water Molybdenum as Mo IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
239 Drinking Water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
240 Drinking Water Nickel as Ni
IN WATER Edition
CHEMICAL- RESIDUES APHA 3500-K (B) 23rd
241 Drinking Water Potassium as K
IN WATER Edition
CHEMICAL- RESIDUES
242 Drinking Water Selenium as Se IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
243 Drinking Water Silver as Ag IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3500 ( Na), 23rd
244 Drinking Water Sodium as Na
IN WATER Edition
CHEMICAL- RESIDUES
245 Drinking Water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
246 Drinking Water Total Arsenic as As,
IN WATER Edition
CHEMICAL- RESIDUES
247 Drinking Water Zinc as Zn APHA 3125, 23rd Edition
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 19 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
248 Drinking Water Zinc as Zn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
249 Ground Water Aluminum as Al
IN WATER Edition
CHEMICAL- RESIDUES
250 Ground Water Aluminum as Al IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
251 Ground Water Antimony IS 3025 (P-65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
252 Ground Water Barium as Ba
IN WATER Edition
CHEMICAL- RESIDUES
253 Ground Water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
254 Ground Water Boron as B
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
255 Ground Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES
256 Ground Water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
257 Ground Water Cobalt IS 3025 (P-65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
258 Ground Water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
259 Ground Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
260 Ground Water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
261 Ground Water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
262 Ground Water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
263 Ground Water Manganese as Mn IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 20 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES APHA 3125 (B) 23rd

264 Ground Water Manganese as Mn
IN WATER Edition
CHEMICAL- RESIDUES
265 Ground Water Mercury as Hg IS 3025 (Part 48)
IN WATER
CHEMICAL- RESIDUES
266 Ground Water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
267 Ground Water Molybdenum as Mo
IN WATER Edition
CHEMICAL- RESIDUES
268 Ground Water Molybdenum as Mo IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
269 Ground Water Nickel as Ni
IN WATER Edition
CHEMICAL- RESIDUES
270 Ground Water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
271 Ground Water Selenium as Se
IN WATER Edition
CHEMICAL- RESIDUES
272 Ground Water Selenium as Se IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
273 Ground Water Silver as Ag
IN WATER Edition
CHEMICAL- RESIDUES
274 Ground Water Silver as Ag IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
275 Ground Water T. Chromium as Cr IS 3025 (Part 52)
IN WATER
CHEMICAL- RESIDUES
276 Ground Water T. Chromium as Cr IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
277 Ground Water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
278 Ground Water Zinc as Zn
IN WATER Edition
CHEMICAL- RESIDUES
279 Ground Water Zinc as Zn IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 21 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES APHA 3125 (B) 23rd

280 Industrial Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES
281 Industrial Water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
282 Industrial Water Chromium as Cr IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
283 Industrial Water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
284 Industrial Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
285 Industrial Water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
286 Industrial Water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
287 Industrial Water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
288 Industrial Water Zinc as Zn
IN WATER Edition
CHEMICAL- RESIDUES
289 Industrial Water Zinc as Zn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
290 Irrigation Water Boron as B
IN WATER Edition
CHEMICAL- RESIDUES
291 Irrigation Water Boron as B IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
292 Packaged Drinking Water Chromium as Cr+6 IS 3025 (Part 52)
IN WATER
CHEMICAL- RESIDUES APHA 3125(B), 23rd
293 Packaged Drinking Water Aluminum as Al
IN WATER Edition
CHEMICAL- RESIDUES
294 Packaged Drinking Water Aluminum as Al IS 3025 (Part 55)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
295 Packaged Drinking Water Barium as Ba
IN WATER Edition

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 22 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
296 Packaged Drinking Water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
297 Packaged Drinking Water Boron as B IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
298 Packaged Drinking Water Boron as B IS:3025 (Part 57)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
299 Packaged Drinking Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES
300 Packaged Drinking Water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
301 Packaged Drinking Water Chromium as Cr+6 IS 3025 (Part 52)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
302 Packaged Drinking Water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
303 Packaged Drinking Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
304 Packaged Drinking Water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES APHA 3125(B), 23rd
305 Packaged Drinking Water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
306 Packaged Drinking Water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3500 (Mg-B), 23rd
307 Packaged Drinking Water Magnesium as Mg
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125(B), 23rd
308 Packaged Drinking Water Manganese as Mn
IN WATER Edition
CHEMICAL- RESIDUES
309 Packaged Drinking Water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125(B), 23rd
310 Packaged Drinking Water Mercury as Hg
IN WATER Edition
CHEMICAL- RESIDUES
311 Packaged Drinking Water Mercury as Hg IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 23 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES APHA 3125 (B) 23rd

312 Packaged Drinking Water Molybdenum as Mo
IN WATER Edition
CHEMICAL- RESIDUES
313 Packaged Drinking Water Molybdenum as Mo IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
314 Packaged Drinking Water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3500-K (B) 23rd
315 Packaged Drinking Water Potassium as K
IN WATER Edition
CHEMICAL- RESIDUES
316 Packaged Drinking Water Selenium as Se IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
317 Packaged Drinking Water Silver as Ag IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3500-Na 23rd
318 Packaged Drinking Water Sodium as Na
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125(B),23rd
319 Packaged Drinking Water T.Chromium as Cr
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
320 Packaged Drinking Water Total Arsenic as As
IN WATER Edition
CHEMICAL- RESIDUES
321 Packaged Drinking Water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
322 Packaged Drinking Water Zinc as Zn
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125(B),23rd
323 Packaged Natural Mineral Water Aluminum as Al
IN WATER Edition
CHEMICAL- RESIDUES
324 Packaged Natural Mineral Water Aluminum as Al IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
325 Packaged Natural Mineral Water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
326 Packaged Natural Mineral Water Boron as B IS 3025 (Part 57)
IN WATER
CHEMICAL- RESIDUES
327 Packaged Natural Mineral Water Boron as B IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 24 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES APHA 3125 (B) 23rd

328 Packaged Natural Mineral Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES
329 Packaged Natural Mineral Water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
330 Packaged Natural Mineral Water Chromium as Cr IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
331 Packaged Natural Mineral Water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
332 Packaged Natural Mineral Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
333 Packaged Natural Mineral Water Iron as Fe IS: 3025 (Part-53) Cl -7
IN WATER
CHEMICAL- RESIDUES APHA 3125(B) 23rd
334 Packaged Natural Mineral Water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
335 Packaged Natural Mineral Water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
336 Packaged Natural Mineral Water Manganese as Mn
IN WATER Edition
CHEMICAL- RESIDUES
337 Packaged Natural Mineral Water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
338 Packaged Natural Mineral Water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
339 Packaged Natural Mineral Water Molybdenum as Mo
IN WATER Edition
CHEMICAL- RESIDUES
340 Packaged Natural Mineral Water Molybdenum as Mo IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
341 Packaged Natural Mineral Water Nickel as Ni
IN WATER Edition
CHEMICAL- RESIDUES
342 Packaged Natural Mineral Water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
343 Packaged Natural Mineral Water Selenium as Se
IN WATER Edition

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 25 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
344 Packaged Natural Mineral Water Selenium as Se IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
345 Packaged Natural Mineral Water Silver as Ag
IN WATER Edition
CHEMICAL- RESIDUES
346 Packaged Natural Mineral Water Silver as Ag IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 Cr 23rd
347 Packaged Natural Mineral Water T. Chromium as Cr
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
348 Packaged Natural Mineral Water Total Arsenic as As
IN WATER Edition
CHEMICAL- RESIDUES
349 Packaged Natural Mineral Water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
350 Packaged Natural Mineral Water Zinc as Zn
IN WATER Edition
CHEMICAL- RESIDUES
351 Packaged Natural Mineral Water Zinc as Zn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
352 Potable Water Aluminum as Al
IN WATER Edition
CHEMICAL- RESIDUES
353 Potable Water Aluminum as Al IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
354 Potable Water Barium as Ba
IN WATER Edition
CHEMICAL- RESIDUES
355 Potable Water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
356 Potable Water Boron as B
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
357 Potable Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES
358 Potable Water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
359 Potable Water Copper as Cu
IN WATER Edition

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 26 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
360 Potable Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
361 Potable Water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
362 Potable Water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
363 Potable Water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
364 Potable Water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
365 Potable Water Manganese as Mn
IN WATER Edition
CHEMICAL- RESIDUES
366 Potable Water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
367 Potable Water Molybdenum as Mo
IN WATER Edition
CHEMICAL- RESIDUES
368 Potable Water Molybdenum as Mo IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
369 Potable Water Nickel as Ni
IN WATER Edition
CHEMICAL- RESIDUES
370 Potable Water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
371 Potable Water Selenium as Se
IN WATER Edition
CHEMICAL- RESIDUES
372 Potable Water Selenium as Se IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
373 Potable Water Silver as Ag IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B)23rd
374 Potable Water Silver as Ag
IN WATER Edition
CHEMICAL- RESIDUES
375 Potable Water T. Chromium as Cr IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 27 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
376 Potable Water T. Chromium as Cr IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
377 Potable Water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
378 Potable Water Total Arsenic as As
IN WATER Edition
CHEMICAL- RESIDUES
379 Potable Water Zinc as Zn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES IS: 3025(Part 65) Cl 1 to
380 Surface Water Aluminum as Al
IN WATER 11
CHEMICAL- RESIDUES
381 Surface Water Antimony IS 3025 (P-65)
IN WATER
CHEMICAL- RESIDUES
382 Surface water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
383 Surface water Boron as B IS 3025 (Part 57)
IN WATER
CHEMICAL- RESIDUES
384 Surface water Boron as B IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
385 Surface water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
386 Surface water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES IS: 3025 (Part 52) Cl 1 to
387 Surface Water Chromium as Cr
IN WATER 7
CHEMICAL- RESIDUES
388 Surface Water Cobalt IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
389 Surface water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
390 Surface water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
391 Surface water Iron as Fe IS 3025 (Part 53)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 28 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES APHA 3125 (B) 23rd

392 Surface water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
393 Surface water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
394 Surface water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
395 Surface water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
396 Surface water Molybdenum as Mo IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
397 Surface water Nickel as Ni
IN WATER Edition
CHEMICAL- RESIDUES
398 Surface water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
399 Surface water Selenium as Se
IN WATER Edition
CHEMICAL- RESIDUES
400 Surface water Silver as Ag IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
401 Surface water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
402 Surface water Zinc as Zn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B), 23rd
403 Swimming pool water Aluminum as Al
IN WATER Edition
CHEMICAL- RESIDUES
404 Swimming pool water Aluminum as Al IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
405 Swimming pool water Barium as Ba
IN WATER Edition
CHEMICAL- RESIDUES
406 Swimming pool water Barium as Ba IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES IS 3025 (Part-65) Cl 1 to
407 Swimming pool water Boron as B
IN WATER 11

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 29 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
408 Swimming pool water Cadmium as Cd APHA 3125
IN WATER
CHEMICAL- RESIDUES
409 Swimming pool water Cadmium as Cd IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
410 Swimming pool water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
411 Swimming pool water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
412 Swimming pool water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B), 23rd
413 Swimming pool water Lead as Pb
IN WATER Edition
CHEMICAL- RESIDUES
414 Swimming pool water Lead as Pb IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
415 Swimming pool water Manganese as Mn
IN WATER Edition
CHEMICAL- RESIDUES
416 Swimming pool water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
417 Swimming pool water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B), 23rd
418 Swimming pool water Nickel as Ni
IN WATER Edition
CHEMICAL- RESIDUES
419 Swimming pool water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
420 Swimming pool water Selenium as Se
IN WATER Edition
CHEMICAL- RESIDUES IS: 3025 (Part-65) Cl 1 to
421 Swimming pool water Selenium as Se
IN WATER 11
CHEMICAL- RESIDUES APHA 3125 (B), 23rd
422 Swimming pool water Silver as Ag
IN WATER Edition
CHEMICAL- RESIDUES
423 Swimming pool water Silver as Ag IS 3025 (Part 65)
IN WATER

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 30 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

T. Chromium as Cr as per
APHA 3125 (B), 23rd
CHEMICAL- RESIDUES Edition : 2017, Standard APHA 3125 (B) 23rd
424 Swimming pool water
IN WATER Methods for the Edition
examination of water &
waste water,
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
425 Swimming pool water Zinc as Zn
IN WATER Edition
CHEMICAL- RESIDUES
426 Swimming pool water Zinc as Zn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES IS 3025 (Part-65) Cl 1 to
427 Waste Water Boron as B
IN WATER 11
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
428 Waste Water Cadmium as Cd
IN WATER Edition
CHEMICAL- RESIDUES IS: 3025 (Part-65) Cl 1 to
429 Waste Water Cadmium as Cd
IN WATER 11
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
430 Waste Water Copper as Cu
IN WATER Edition
CHEMICAL- RESIDUES
431 Waste Water Copper as Cu IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES
432 Waste Water Iron as Fe IS 3025 (Part 53)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
433 Waste Water Lead s Pb
IN WATER Edition
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
434 Waste Water Manganese as Mn
IN WATER Edition
CHEMICAL- RESIDUES
435 Waste Water Manganese as Mn IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
436 Waste Water Mercury as Hg
IN WATER Edition
CHEMICAL- RESIDUES
437 Waste Water Mercury as Hg IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
438 Waste Water Nickel as Ni
IN WATER Edition

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 31 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

CHEMICAL- RESIDUES
439 Waste Water Nickel as Ni IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
440 Waste Water Selenium as Se
IN WATER Edition
CHEMICAL- RESIDUES
441 Waste Water T. Chromium as Cr IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125 (B) 23rd
442 Waste Water Total Arsenic
IN WATER Edition
CHEMICAL- RESIDUES
443 Waste Water Total Arsenic as As IS 3025 (Part 65)
IN WATER
CHEMICAL- RESIDUES APHA 3125(B) 23rd
444 Waste Water Zinc as Zn
IN WATER Edition
CHEMICAL- RESIDUES
445 Waste Water Zinc as Zn IS 3025 (Part 65)
IN WATER
IS: 11624 (1986) Cl 4.1.1,
446 CHEMICAL- WATER Irrigation Water Specific conductance IS: 3025 (Part 14 ) 2013,
Cl 1 to 7
Total Dissolved Solid IS 3025 :(Part-16) Cl 1 to
447 CHEMICAL- WATER Irrigation Water
(TDS) 8,
APHA 4500 NH3 (B,C)
448 CHEMICAL- WATER Drinking Water Ammonia as NH3/N
23rd Edition
449 CHEMICAL- WATER Drinking Water Ammonia as NH3/N IS 3025 (Part-34) Cl 3.4
Anionic Detergents as APHA 5540 (C) 23rd
450 CHEMICAL- WATER Drinking Water
MBAS Edition
Anionic Detergents as
451 CHEMICAL- WATER Drinking Water IS 3025 (Part-68) Cl 2
MBAS
452 CHEMICAL- WATER Drinking Water Calcium as Ca IS 3025 (Part-40) Cl 1 to 5
APHA 4500-(Cl) 23rd
453 CHEMICAL- WATER Drinking Water Chloramines as Cl2
Edition
454 CHEMICAL- WATER Drinking Water Chloramines as Cl2 IS 3025 (Part-26) Cl 1 to 4
455 CHEMICAL- WATER Drinking Water Chloride as Cl IS 3025 (Part-32) Cl 1 to 2
IS 3025 (Part-4):1983, Cl
456 CHEMICAL- WATER Drinking Water Color
2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 32 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

APHA 4500 (F) 23rd

457 CHEMICAL- WATER Drinking Water Fluoride as F
Edition
458 CHEMICAL- WATER Drinking Water Fluoride as F IS 3025 (Part-60) Cl 5
459 CHEMICAL- WATER Drinking Water Magnesium as (Mg) IS 3025 (Part-46) Cl 6
460 CHEMICAL- WATER Drinking Water Magnesium as (Mg) IS 3025 (Part-46) Cl 6
461 CHEMICAL- WATER Drinking Water Nitrate as NO3/N IS 3025 (Part-34) Cl 3
462 CHEMICAL- WATER Drinking Water Odour IS 3025 (Part-5) Cl 1 to 3
463 CHEMICAL- WATER Drinking Water Odour IS 3025 (Part-6) Cl 5 to 8
464 CHEMICAL- WATER Drinking Water pH IS 3025 (Part-11) Cl 1 to 2
APHA 5530 (C) 23rd
465 CHEMICAL- WATER Drinking Water Phenolic Compound
Edition
466 CHEMICAL- WATER Drinking Water Phenolic Compound IS 3025 (Part-43) Cl 1 to 6
467 CHEMICAL- WATER Drinking Water Phosphorus as P/PO4 IS 3025 (Part-31) Cl 1 to 4
468 CHEMICAL- WATER Drinking Water Potassium as K IS 3025 (Part-45) Cl 1 to 5
469 CHEMICAL- WATER Drinking Water Residual Chlorine IS 3025 (Part-26) Cl 1 to 3
APHA 4500 SiO2 (C) 23rd
470 CHEMICAL- WATER Drinking Water Silica as SiO2
Edition
471 CHEMICAL- WATER Drinking Water Silica as SiO2 IS 3025 (Part-35) Cl 1 to 3
472 CHEMICAL- WATER Drinking Water Sodium as Na IS 3025 (Part-45) Cl 1 to 5
473 CHEMICAL- WATER Drinking Water Sulphate as SO3 IS 3025 (Part-24) Cl 4
474 CHEMICAL- WATER Drinking Water Sulphide as H2S IS 3025 (Part-29) Cl 1 to2
475 CHEMICAL- WATER Drinking Water Taste IS 3025 (Part-7) Cl 1 to 5
476 CHEMICAL- WATER Drinking Water Taste IS 3025 (Part-7) Cl 1 to 8
Total Alkalinity/ P.
477 CHEMICAL- WATER Drinking Water IS 3025 (Part-23) Cl 1 to 9
Alkalinity
Total Dissolved Solid
478 CHEMICAL- WATER Drinking Water IS 3025 (Part-16) Cl 1 to 8
(TDS)
479 CHEMICAL- WATER Drinking Water Total Hardness IS 3025 (Part-21) Cl 1 to 7

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 33 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Total Suspended Solid

480 CHEMICAL- WATER Drinking Water IS 3025 (Part-17) Cl 1 to 5
(TSS)
481 CHEMICAL- WATER Drinking Water Turbidity IS 3025(Part-10) Cl 1 to 8
482 CHEMICAL- WATER Ground Water Ammonia as NH3 IS 3025 :(Part 34) Cl 3,
APHA 4500 NH3 (B,C)
483 CHEMICAL- WATER Ground water Ammonia as NH3/N
23rd Edition
Anionic Detergents (as APHA 5540 (C) 23rd
484 CHEMICAL- WATER Ground Water
MBAS) Edition
Anionic Detergents (as
485 CHEMICAL- WATER Ground Water IS 3025: (Part 68)
MBAS)
486 CHEMICAL- WATER Ground Water Boron as B IS 3025 (Part 57) Cl 1 to 6
IS 3025: (Part -40) Cl 1 to
487 CHEMICAL- WATER Ground Water Calcium as Ca
5
APHA 4500-(Cl) 23rd
488 CHEMICAL- WATER Ground Water Chloramines as Cl2
Edition
489 CHEMICAL- WATER Ground Water Chloramines as Cl2 IS 3025:(Part 26) Cl 1 to 4
490 CHEMICAL- WATER Ground Water Chloride as Cl IS 3025 (Part 32) Cl 1 to 2
Chromium Hexavalent as IS 3025: (Part 52) Cl 1 to
491 CHEMICAL- WATER Ground Water
Cr+6 7,
492 CHEMICAL- WATER Ground Water Color IS 3025 (Part 4) Cl 2
APHA 4500 (F) 23rd
493 CHEMICAL- WATER Ground Water Fluoride as F
Edition
494 CHEMICAL- WATER Ground Water Fluoride as F IS 3025: (Part 60) Cl 5,
APHA 3500 ( Mg-B) 23rd
495 CHEMICAL- WATER Ground Water Magnesium as Mg
Edition
496 CHEMICAL- WATER Ground Water Magnesium as Mg IS 3025 (Part 46) Cl 6
IS 3025 (Part 39) Cl 1 to 6
497 CHEMICAL- WATER Ground Water Mineral oil
Reaffirmed
498 CHEMICAL- WATER Ground water Nitrate as NO3 IS 3025 (Part 34) Cl 3
499 CHEMICAL- WATER Ground Water Odor IS 3025:(Part-6) Cl 5 to 8
500 CHEMICAL- WATER Ground Water Odor IS 3025: (Part-5) Cl 1 to 3,

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 34 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

501 CHEMICAL- WATER Ground Water pH IS 3025 (Part-11) Cl 1 to 2

APHA 5530 (C) 23rd
502 CHEMICAL- WATER Ground water Phenolic Compound
Edition
IS 3025 :(Part 43) Cl 1 to
503 CHEMICAL- WATER Ground Water Phenolic Compound
6
504 CHEMICAL- WATER Ground Water Phosphorus as P/PO4 IS 3025:(Part-31) Cl 1 to 4
APHA 3500-K (B) 23rd
505 CHEMICAL- WATER Ground Water Potassium as K
Edition
IS 3025: (Part 45) Cl 1
506 CHEMICAL- WATER Ground Water Potassium as K
tot5
IS 3025: (Part 26) Cl 1 to
507 CHEMICAL- WATER Ground Water Residual Chlorine
4,
APHA 4500 SiO2 (C) 23rd
508 CHEMICAL- WATER Ground Water Silica as SiO2
Edition
IS 3025 :(Part 35) Cl 1 to
509 CHEMICAL- WATER Ground Water Silica as SiO2
3
APHA 3500-Na 23rd
510 CHEMICAL- WATER Ground Water Sodium as Na
Edition
IS 3025: (Part 45) Cl 1 to
511 CHEMICAL- WATER Ground Water Sodium as Na
5
512 CHEMICAL- WATER Ground Water Sulphate as SO4 IS 3025:(Part 24) Cl 4
IS 3025 :(Part 29) Cl 1 to
513 CHEMICAL- WATER Ground Water Sulphide as H2S
2
514 CHEMICAL- WATER Ground Water Taste IS 3025-(Part 7) Cl 1 to 5
515 CHEMICAL- WATER Ground Water Taste IS 3025-(Part 8) Cl 1 to 8
516 CHEMICAL- WATER Ground Water Total Alkalinity IS 3025:(Part 23) Cl 1 to 9
Total Dissolved Solid
517 CHEMICAL- WATER Ground Water IS 3025 (Part-16) Cl 1 to 8
(TDS)
518 CHEMICAL- WATER Ground Water Total Hardness IS 3025:(Part-21) Cl 1 to 7
IS :3025 (Part-17) Cl 1 to
519 CHEMICAL- WATER Ground Water Total Solid
5,

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 35 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 3025: (Part-17) Cl 1 to
520 CHEMICAL- WATER Ground Water Total Suspended Solid
5
IS 3025 :(Part 10) Cl 1 to
521 CHEMICAL- WATER Ground Water Turbidity
8
IS 3025: (Part-11) Cl 1 to
522 CHEMICAL- WATER Industrial Water pH
2,
IS 3025: (Part -40) Cl 1 to
523 CHEMICAL- WATER Industrial Water Calcium as Ca
5
IS 3025: (Part 32) Cl 1 to
524 CHEMICAL- WATER Industrial Water Chloride as Cl
2,
IS 3025: (Part 52) Cl 1 to
525 CHEMICAL- WATER Industrial Water Chromium as Cr+6
6,
APHA 4500 F (D) 23rd
526 CHEMICAL- WATER Industrial Water Fluoride as F
Edition
527 CHEMICAL- WATER Industrial Water Fluoride as F IS 3025: (Part 60) Cl 5,
APHA 3500 ( Mg-B) 23rd
528 CHEMICAL- WATER Industrial Water Magnesium as Mg
Edition
529 CHEMICAL- WATER Industrial Water Nitrate as NO3/ N IS 3025 : (Part 34 ) Cl 3
530 CHEMICAL- WATER Industrial Water Phosphorous as PO4 IS 3025:(Part-31) Cl 1 to 4
531 CHEMICAL- WATER Industrial Water Silica as SiO2 IS 3025:(Part 35) Cl 1 to 3
532 CHEMICAL- WATER Industrial Water Sulphate as SO4 IS 3025: (Part 24) Cl 4,
IS 3025: (Part 23) Cl 1 to
533 CHEMICAL- WATER Industrial Water T. Alkalinity
9,
IS 3025 :(Part-16) Cl 1 to
534 CHEMICAL- WATER Industrial Water Total Dissolved Solid
8,
IS: 11624(1986) Cl 5.1.1,
535 CHEMICAL- WATER Irrigation Water Boron as B
IS: 3025 (Part 57) Cl 6
IS: 11624(1986) Cl
536 CHEMICAL- WATER Irrigation Water Bicarbonates 4.1.3,IS: 3025 (Part 51) Cl
1 to 9,
IS:11624(1986) Cl 5.1.1,
537 CHEMICAL- WATER Irrigation Water Calcium as Ca IS 3025 :(Part -40) Cl 1 to
5,

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 36 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS:11624(1986)Cl 4.1.3,
538 CHEMICAL- WATER Irrigation Water Carbonates IS: 3025 (Part 51) Cl 1 to
9,
IS:11624(1986) Cl 4.1.4,
539 CHEMICAL- WATER Irrigation Water Magnesium as Mg APHA 3500 ( Mg-B) 23rd
Edition
IS: 11624(1986) Cl 4.1.4,
540 CHEMICAL- WATER Irrigation Water Magnesium as Mg
IS 3025:(Part 46) Cl 6
IS 3025: (Part-11) Cl 1 to
541 CHEMICAL- WATER Irrigation Water pH
2,
IS: 11624(1986) Cl 4.1.2,
542 CHEMICAL- WATER Irrigation Water Sodium as Na IS 3025: (Part 45) Cl 1 to
5
IS: 11624(1986) Cl 4.1.2,
543 CHEMICAL- WATER Irrigation Water Sodium as Na, APHA 3500-Na,23rd
Edition
IS 3025: (Part 23) Cl 1 to
544 CHEMICAL- WATER Irrigation Water Total Alkalinity
9,
APHA 4500 NH3 (B,C),
545 CHEMICAL- WATER Packaged Drinking Water Ammonia as NH3
23rd Edition
546 CHEMICAL- WATER Packaged Drinking Water Ammonia as NH3 IS :3025 (Part-34) Cl 3.4
Anionic Detergents as APHA 5540 (C), 23rd
547 CHEMICAL- WATER Packaged Drinking Water
MBAS Edition
Anionic Detergents as
548 CHEMICAL- WATER Packaged Drinking Water IS 3025 (Part-68) Cl 2
MBAS
549 CHEMICAL- WATER Packaged Drinking Water Calcium as Ca IS 3025 (Part-40) Cl 1 to 5
550 CHEMICAL- WATER Packaged Drinking Water Chloramines as Cl2 IS 3025:(Part 26) Cl 1 to 4
APHA 4500-Cl, G, 23rd
551 CHEMICAL- WATER Packaged Drinking Water Chloramines as Cl2
Edition
552 CHEMICAL- WATER Packaged Drinking Water Chloride as Cl IS 3025 (Part-32) Cl 1 to 2
553 CHEMICAL- WATER Packaged Drinking Water Color IS 3025 (Part-4) Cl 2
APHA 4500 (F) 23rd
554 CHEMICAL- WATER Packaged Drinking Water Fluoride as F
Edition

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 37 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

555 CHEMICAL- WATER Packaged Drinking Water Fluoride as F IS 3025 (Part-60) Cl 5

556 CHEMICAL- WATER Packaged Drinking Water Nitrate as NO3 IS 3025 (Part-34) Cl 3
557 CHEMICAL- WATER Packaged Drinking Water Odour IS 3025 (Part-5) Cl 1 to 3
558 CHEMICAL- WATER Packaged Drinking Water Odour IS 3025 (Part-6) Cl 5 to 8
559 CHEMICAL- WATER Packaged Drinking Water pH IS 3025 (Part-11) Cl 1 to 2
APHA 5530 (C) 23rd
560 CHEMICAL- WATER Packaged Drinking Water Phenolic Compound
Edition
561 CHEMICAL- WATER Packaged Drinking Water Phenolic Compound IS 3025 (Part 43) Cl 1 to 6
IS :3025 (Part-31) Cl 1 to
562 CHEMICAL- WATER Packaged Drinking Water Phosphorus as PO4
4
IS 3025: (Part 45) Cl 1 to
563 CHEMICAL- WATER Packaged Drinking Water Potassium as K
5
564 CHEMICAL- WATER Packaged Drinking Water Residual Chlorine IS 3025 (Part-26) Cl 1 to 3
565 CHEMICAL- WATER Packaged Drinking Water Silica as SiO2 APHA 4500 C,23rd Edition
566 CHEMICAL- WATER Packaged Drinking Water Silica as SiO2 IS 3025:(Part-35) Cl 1 to 3
567 CHEMICAL- WATER Packaged Drinking Water Sodium as Na IS 3025 (Part 45) Cl 1 to 5
568 CHEMICAL- WATER Packaged Drinking Water Sulphate as SO4 IS 3025 (Part-24) Cl 4
569 CHEMICAL- WATER Packaged Drinking Water Sulphide as H2S IS 3025 (Part 29) Cl 1 to 2
570 CHEMICAL- WATER Packaged Drinking Water Taste IS :3025 (Part-7) Cl 1 to 5
571 CHEMICAL- WATER Packaged Drinking Water Taste IS 3025 (Part-8) Cl 1 to 8
572 CHEMICAL- WATER Packaged Drinking Water Total Alkalinity IS 3025 (Part-23) Cl 1 to 9
Total Dissolved Solid
573 CHEMICAL- WATER Packaged Drinking Water IS 3025 (Part-16) Cl 1 to 8
(TDS)
IS :3025 (Part-21) Cl 1 to
574 CHEMICAL- WATER Packaged Drinking Water Total Hardness
7
IS :3025 (Part-10) Cl 1 to
575 CHEMICAL- WATER Packaged Drinking Water Turbidity
8
APHA 4500 NH3 (B,C)
576 CHEMICAL- WATER Packaged Natural Mineral Water Ammonia as NH3
23rd Edition
577 CHEMICAL- WATER Packaged Natural Mineral Water Ammonia as NH3 IS: 3025 (Part-34) Cl 3.4

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 38 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Anionic Detergents as APHA Standard 5540 (C)

578 CHEMICAL- WATER Packaged Natural Mineral Water
MBAS 23rd Edition
Anionic Detergents as
579 CHEMICAL- WATER Packaged Natural Mineral Water IS 3025 (Part 68) Cl 2
MBAS
580 CHEMICAL- WATER Packaged Natural Mineral Water Boron as B IS 3025 (Part-57) Cl 6
581 CHEMICAL- WATER Packaged Natural Mineral Water Calcium as Ca IS 3025 (Part-40) Cl 1 to 5
APHA 4500-Cl (G) 23rd
582 CHEMICAL- WATER Packaged Natural Mineral Water Chloramines as Cl2
Edition
583 CHEMICAL- WATER Packaged Natural Mineral Water Chloramines as Cl2 IS 3025:(Part 26)
584 CHEMICAL- WATER Packaged Natural Mineral Water Chloride as Cl IS 3025 (Part-32) Cl 1 to 2
585 CHEMICAL- WATER Packaged Natural Mineral Water Chromium as Cr+6 IS 3025(Part-52) Cl 1 to 6
586 CHEMICAL- WATER Packaged Natural Mineral Water Colour IS 3025 (Part-4)1 Cl 2
APHA 4500 (F) 23rd
587 CHEMICAL- WATER Packaged Natural Mineral Water Fluoride as F
Edition
588 CHEMICAL- WATER Packaged Natural Mineral Water Fluoride as F IS 3025(Part-60) Cl 5
APHA 3500 (Mg-B) 23rd
589 CHEMICAL- WATER Packaged Natural Mineral Water Magnesium as Mg
Edition
590 CHEMICAL- WATER Packaged Natural Mineral Water Magnesium as Mg IS 3025 (Part-46) Cl 6
591 CHEMICAL- WATER Packaged Natural Mineral Water Nitrate as NO3 IS 3025(Part 34) Cl 3
592 CHEMICAL- WATER Packaged Natural Mineral Water Odour IS 3025 (Part-5) Cl 1 to 3
593 CHEMICAL- WATER Packaged Natural Mineral Water Odour IS 3025(Part-6) Cl 5 to 8
594 CHEMICAL- WATER Packaged Natural Mineral Water pH IS 3025 (Part-11) Cl 1,2
APHA 5530 (C) 23rd
595 CHEMICAL- WATER Packaged Natural Mineral Water Phenolic Compound
Edition
596 CHEMICAL- WATER Packaged Natural Mineral Water Phenolic Compound IS 3025 (Part-43) Cl 1 to 6
APHA 3500-K (B) 23rd
597 CHEMICAL- WATER Packaged Natural Mineral Water Potassium as K
Edition
598 CHEMICAL- WATER Packaged Natural Mineral Water Potassium as K IS 3025:(Part 45) Cl 1 to 5
IS 3025: (Part 26) Cl 1 to
599 CHEMICAL- WATER Packaged Natural Mineral Water Residual Chlorine
3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 39 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

APHA 4500 SiO2 (C) 23rd

600 CHEMICAL- WATER Packaged Natural Mineral Water Silica as SiO2
Edition
IS: 3025 (Part-35) Cl 1 to
601 CHEMICAL- WATER Packaged Natural Mineral Water Silica as SiO2
3
APHA 3500-Na, 23rd
602 CHEMICAL- WATER Packaged Natural Mineral Water Sodium as Na
Edition
603 CHEMICAL- WATER Packaged Natural Mineral Water Sodium as Na IS 3025 (Part 45) Cl 1 to 5
604 CHEMICAL- WATER Packaged Natural Mineral Water Sulphate as SO4 IS 3025 (Part-24) Cl 4
605 CHEMICAL- WATER Packaged Natural Mineral Water Sulphide as H2S IS 3025 (Part 29) Cl 1 to 2
606 CHEMICAL- WATER Packaged Natural Mineral Water T. Alkalinity IS 3025 (Part 23) Cl 1 to 9
607 CHEMICAL- WATER Packaged Natural Mineral Water Taste IS 3025 (Part-7) Cl 1 to 5
608 CHEMICAL- WATER Packaged Natural Mineral Water Taste IS:3025 (Part 8) Cl 1 to 8
Total Dissolved Solid
609 CHEMICAL- WATER Packaged Natural Mineral Water IS 3025 (Part-16) Cl 1 to 8
(TDS)
IS: 3025 (Part-21) Cl 1 to
610 CHEMICAL- WATER Packaged Natural Mineral Water Total Hardness
7
IS: 3025 (Part-17) Cl 1 to
611 CHEMICAL- WATER Packaged Natural Mineral Water Total Suspended Solid
5
612 CHEMICAL- WATER Packaged Natural Mineral Water Turbidity IS 3025 (Part-10) Cl 1 to 8
APHA 4500 NH3 (B,C)
613 CHEMICAL- WATER Potable Water Ammonia as NH3
23rd Edition
614 CHEMICAL- WATER Potable Water Ammonia as NH3 IS 3025:(Part 34) Cl 3
Anionic Detergents (as APHA 5540 (C) 23rd
615 CHEMICAL- WATER Potable Water
MBAS) Edition
Anionic Detergents (as
616 CHEMICAL- WATER Potable Water IS 3025 (Part 68)
MBAS)
617 CHEMICAL- WATER Potable Water Boron as B IS 3025 (Part 57) Cl 1 to 6
IS 3025: (Part-40) Cl 1 to
618 CHEMICAL- WATER Potable Water Calcium as Ca
5
APHA 4500-(Cl) 23rd
619 CHEMICAL- WATER Potable Water Chloramines as Cl2
Edition

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 40 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

620 CHEMICAL- WATER Potable Water Chloramines as Cl2 IS 3025:(Part 26) Cl 1 to 4

621 CHEMICAL- WATER Potable Water Chloride as Cl IS 3025 (Part 32) Cl 1 to 2
Chromium Hexavalent as
622 CHEMICAL- WATER Potable Water IS 3025 (Part 52) Cl 1 to 6
Cr+6
623 CHEMICAL- WATER Potable Water Color IS 3025 (Part 4) Cl 2
APHA 4500 (F) 23rd
624 CHEMICAL- WATER Potable Water Fluoride as F
Edition
625 CHEMICAL- WATER Potable Water Fluoride as F IS 3025 (Part 60) Cl 5
APHA 3500 ( Mg-B) 23rd
626 CHEMICAL- WATER Potable Water Magnesium as Mg
Edition
627 CHEMICAL- WATER Potable Water Magnesium as Mg IS 3025 (Part 46) Cl 6
IS 3025: (Part 39) Cl 1 to
628 CHEMICAL- WATER Potable Water Mineral oil
6
629 CHEMICAL- WATER Potable Water Nitrate as NO3 IS 3025 (Part 34) Cl 3
630 CHEMICAL- WATER Potable Water Odor IS 3025 (Part-5) Cl 1 to 3
631 CHEMICAL- WATER Potable Water Odor IS 3025 (Part-6) Cl 5 to 8
IS 3025: (Part-11) Cl 1 to
632 CHEMICAL- WATER Potable Water pH
2
APHA 5530 (C) 23rd
633 CHEMICAL- WATER Potable Water Phenolic Compound
Edition
634 CHEMICAL- WATER Potable Water Phenolic Compound IS 3025:(Part 43) Cl 1 to 6
635 CHEMICAL- WATER Potable Water Phosphorus as PO4 IS 3025:(Part-31) Cl 1 to 4
APHA 3500-K (B) 23rd
636 CHEMICAL- WATER Potable Water Potassium as K
Edition
IS 3025:(Part 45) Cl 1 tot
637 CHEMICAL- WATER Potable Water Potassium as K
5
IS 3025: (Part 26)1986, Cl
638 CHEMICAL- WATER Potable Water Residual Chlorine
1 to 4,Reaffirmed
APHA 4500 SiO2 (C) 23rd
639 CHEMICAL- WATER Potable Water Silica as SiO2
Edition
640 CHEMICAL- WATER Potable Water Silica as SiO2 IS: 3025(Part 35) Cl 1 to 3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 41 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

APHA 3500-Na 23rd

641 CHEMICAL- WATER Potable Water Sodium as Na
Edition
642 CHEMICAL- WATER Potable Water Sodium as Na IS 3025:(Part 45) Cl 1 to 5
643 CHEMICAL- WATER Potable Water Sulphate as SO4 IS 3025:(Part 24) Cl 4
644 CHEMICAL- WATER Potable Water Sulphide as H2S IS 3025 (Part 29) Cl 1 to 2
645 CHEMICAL- WATER Potable Water Taste IS 3025 (Part 8) Cl 1 to 8
646 CHEMICAL- WATER Potable Water Taste IS 3025(Part 7) Cl 1 to 5
647 CHEMICAL- WATER Potable Water Total Alkalinity IS 3025 (Part 23) Cl 1 to 9
Total Dissolved Solid
648 CHEMICAL- WATER Potable Water IS 3025 (Part-16) Cl 1 to 8
(TDS)
649 CHEMICAL- WATER Potable Water Total Hardness IS 3025 (Part-21) Cl 1 to 7
Total Suspended Solid
650 CHEMICAL- WATER Potable Water IS 3025(Part-17) Cl 1 to 5
(TSS)
651 CHEMICAL- WATER Potable Water Turbidity IS 3025 (Part 10) Cl 1 to 8
IS: 1070 (1992) Cl 4.2,
652 CHEMICAL- WATER Reagent grade pH IS-3025: (Part-11) Cl 1 to
2
IS 1070( 1992) Cl 4.2,
653 CHEMICAL- WATER Reagent grade water Silica as SiO2 APHA 4500 SiO2 (C) 23rd
Edition
IS: 1070 (1992) Cl 4.2, IS
654 CHEMICAL- WATER Reagent grade water Silica as SiO2
3025:(Part 35) Cl 1 to 3
655 CHEMICAL- WATER Reagent Grade Water Specific Conductance IS 3025 (Part -14)
IS: 1070 ( 1992) Cl 4.2, IS
656 CHEMICAL- WATER Reagent grade water Total Solids
3025:(Part-15) Cl 1 to 7
657 CHEMICAL- WATER Surface water Ammonia as NH3 IS:3025 (Part 34) Cl 1 to 2
Anionic Detergent as APHA 5540 (C) 23rd
658 CHEMICAL- WATER Surface water
MBAS Edition
Biological Oxygen
IS 3025:(Part 44) Cl 1 to
659 CHEMICAL- WATER Surface water Demand (BOD) At 27 °C
12
For 3 Days

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 42 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

660 CHEMICAL- WATER Surface water Boron as B IS 3025 (part 57) Cl 1 to 6

661 CHEMICAL- WATER Surface water Calcium as Ca IS 3025 (Part 40) Cl 1 to 5
Chemical Oxygen IS 3025 (Part 58) Cl 1 to
662 CHEMICAL- WATER Surface water
Demand (COD) 10
663 CHEMICAL- WATER Surface water Chloride as Cl IS 3025:(Part 32) Cl 1 to 2
664 CHEMICAL- WATER Surface water Colour IS 3025:(Part 4)Cl 2
665 CHEMICAL- WATER Surface water Dissolved Oxygen IS 3025:(Part 38) Cl 1 to 5
APHA 4500 (F) 23rd
666 CHEMICAL- WATER Surface water Fluoride as F
Edition
667 CHEMICAL- WATER Surface water Fluoride as F IS 3025:(Part 60) Cl 5
668 CHEMICAL- WATER Surface water Magnesium as Mg IS 3025:(Part 46) Cl 6
669 CHEMICAL- WATER Surface water Nitrate as NO3 IS 3025:(Part 34) Cl 3
670 CHEMICAL- WATER Surface water Ordor IS 3025: (Part-5) Cl 1 to 3
671 CHEMICAL- WATER Surface Water pH IS:3025(Part-11) Cl 1 to 2
IS 3025: (Part 43) Cl 1 to
672 CHEMICAL- WATER Surface water Phenolic Compound
6
673 CHEMICAL- WATER Surface water Phosphorous as PO4 IS 3025:(Part-31) Cl 1 to 4
674 CHEMICAL- WATER Surface water Residual Chlorine IS 3025:(Part 26) Cl 1 to 4
675 CHEMICAL- WATER Surface water Specific Conductivity IS 3025: (Part -14)
676 CHEMICAL- WATER Surface water Sulphate as SO4 IS 3025 (Part 24) Cl 1 to 4
677 CHEMICAL- WATER Surface water T.Alkalinity / P.Alkalinity IS 3025:(Part 23) Cl 1 to 9
678 CHEMICAL- WATER Surface water Total Dissolved Solid IS 3025:(Part-16)Cl 1 to 8
679 CHEMICAL- WATER Surface water Total Suspended Solids IS 3025(Part-17) Cl 1 to 5
680 CHEMICAL- WATER Surface water Turbidity IS 3025:(Part 10) Cl 1 to 8
681 CHEMICAL- WATER Waste water Oil & Grease IS:3025 (Part 39) Cl 1 to 5
IS: 456(2000) Cl 5.4, IS
682 CHEMICAL- WATER Water for construction purpose Chloride as Cl
3025: (Part 32) Cl 1 to 2
IS:456(2000) Cl 5.4, IS:
683 CHEMICAL- WATER Water for construction purpose Inorganic Solids
3025 (Part-18) Cl 1 to 8

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 43 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Neutralization Value
IS 456(2000) Cl 5.4(b) IS
684 CHEMICAL- WATER Water for construction purpose H2SO4 in 100 ml / Total
3025: (Part 23) Cl 1 to 9
Alkalinity
Neutralization Value
IS:456(2000) Cl 5.4(b),
685 CHEMICAL- WATER Water for construction purpose NaOH in 100 ml / Total
IS:3025 (Part 22) Cl 1 to 9
Acidity
IS:456(2000) Cl 5.4, IS:
686 CHEMICAL- WATER Water for construction purpose Organic Solids
3025 (Part 18) Cl 1 to 8
IS:456(2000) Cl 5.4.2, IS
687 CHEMICAL- WATER Water for construction purpose pH 3025: (Part-11)1983,Cl 1
to 2
IS: 456(2000) Cl 5.4, IS
688 CHEMICAL- WATER Water for construction purpose Sulphate as SO3
3025: (Part 24) Cl 4
Total Suspended Solid IS 456(2000) Cl 5.4, IS
689 CHEMICAL- WATER Water for construction purpose
(TSS) 3025: (Part-17) Cl 1 to 5
APHA 4500 NH3 (B,C)
690 CHEMICAL- WATER Water for Swimming Pool Ammonia as NH3
23rd Edition
IS 3025 :(Part 34) 1988 Cl
691 CHEMICAL- WATER Water for Swimming Pool Ammonia as NH3
3, Reaffirmed
Anionic Detergents(as APHA 5540 (C) 23rd
692 CHEMICAL- WATER Water for Swimming Pool
MBAS) Edition
Anionic Detergents(as
693 CHEMICAL- WATER Water for Swimming Pool IS 3025 :(Part 68) Cl
MBAS)
IS 3025 (Part 57) Cl 1 to
694 CHEMICAL- WATER Water for Swimming Pool Boron as B
6, (Reaffirmed
695 CHEMICAL- WATER Water for Swimming Pool Calcium as Ca IS 3025 (Part 40) 1 to 5
APHA 4500-Cl (G) 23rd
696 CHEMICAL- WATER Water for Swimming Pool Chloramines as Cl2
Edition
697 CHEMICAL- WATER Water for Swimming Pool Chloramines as Cl2 IS 3025:(Part 26) Cl 1 to 4
698 CHEMICAL- WATER Water for Swimming Pool Chloride as Cl IS 3025:(Part 32) Cl 1 to 2
699 CHEMICAL- WATER Water for Swimming Pool Chromium as Cr+6 IS 3025 (Part 52) Cl 1 to 7
IS: 3328 (1993) 2.2 & 5.1
700 CHEMICAL- WATER Water for Swimming Pool Colour
IS 3025: (Part 4) Cl 2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 44 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

APHA 4500 (F)23rd

701 CHEMICAL- WATER Water for Swimming Pool Fluoride as F
Edition
702 CHEMICAL- WATER Water for Swimming Pool Fluoride as F IS 3025: (Part 60) Cl 5
703 CHEMICAL- WATER Water for Swimming Pool Magnesium as Mg IS 3025:(Part 46) Cl 6
APHA 3500 ( Mg-B), 23rd
704 CHEMICAL- WATER Water for Swimming Pool Magnesium as Mg
Edition
705 CHEMICAL- WATER Water for Swimming Pool Nitrate as NO3 IS 3025 :(Part 34) Cl 3
706 CHEMICAL- WATER Water for Swimming Pool Odor IS: 3025 (Part-6) Cl 5 to 8
IS: 3328 (1993) 2.2 & 5.1,
707 CHEMICAL- WATER Water for Swimming Pool Odour
IS: 3025 (Part-5) Cl 1 to 3
Oxygen Absorbed in 4 IS: 3328 (1993) 2.2 & 5.1,
708 CHEMICAL- WATER Water for Swimming Pool
hours at 27 °C IS 3025:(Part 63)
IS: 3328 (1993) Cl 2.2 &
709 CHEMICAL- WATER Water for Swimming Pool pH 5.1, IS: 3025 (Part-11) Cl
1 to 2
APHA 5530 (C)23rd
710 CHEMICAL- WATER Water for Swimming Pool Phenolic Compound
Edition
711 CHEMICAL- WATER Water for Swimming Pool Phenolic Compound IS 3025:(Part 43) Cl 1 to 6
712 CHEMICAL- WATER Water for Swimming Pool Phosphorus as PO4 IS 3025 (Part 31)
IS 3025: (Part 45) Cl 1 to
713 CHEMICAL- WATER Water for Swimming Pool Potassium as K
5,
714 CHEMICAL- WATER Water for Swimming Pool Potassium as K APHA 3500-K 23rd Edition
IS: 3328 (1993) 2.2 & 5.1,
715 CHEMICAL- WATER Water for Swimming Pool Residual Chlorine
IS 3025:(Part 26) Cl 1 to 4
APHA 4500 SiO2 (C),23rd
716 CHEMICAL- WATER Water for Swimming Pool Silica as SiO2
Edition
717 CHEMICAL- WATER Water for Swimming Pool Silica as SiO2 S 3025: (Part 35) Cl 1 to 3
APHA 3500-Na 23rd
718 CHEMICAL- WATER Water for Swimming Pool Sodium as Na
Edition
719 CHEMICAL- WATER Water for Swimming Pool Sodium as Na IS 3025:(Part 45) Cl 1 to 5
720 CHEMICAL- WATER Water for Swimming Pool Sulphate as SO4 IS 3025: (Part 24) Cl 4

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 45 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 3025 :(Part 29) Cl 1 to

721 CHEMICAL- WATER Water for Swimming Pool Sulphide as H2S
3,
722 CHEMICAL- WATER Water for Swimming Pool T. Alkalinity IS 3025 (Part 23) Cl 1 to 9
IS: 3328 (1993) 2.2 & 5.1,
723 CHEMICAL- WATER Water for Swimming Pool Taste
IS:3025 (Part 7) Cl 1 to 5
IS: 3328 (1993) 2.2 & 5.1,
724 CHEMICAL- WATER Water for Swimming Pool Taste
IS:3025-(Part 8) Cl 1 to 8
IS: 3328 (1993) 2.2 & 5.1,
Total Dissolved Solid
725 CHEMICAL- WATER Water for Swimming Pool IS 3025 :(Part-16) Cl 1 to
(TDS)
8
IS 3025: (Part-21) Cl 1 to
726 CHEMICAL- WATER Water for Swimming Pool Total Hardness
7
Total Suspended Solid
727 CHEMICAL- WATER Water for Swimming Pool IS 3025:(Part-17) Cl 1 to 5
(TSS)
IS: 3025 (Part 10) Cl 1 to
728 CHEMICAL- WATER Water for Swimming Pool Turbidity
8
Crosslinked Polyethylene Insulated
IS 7098 (P-2) 2011,Cl 19.1
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
729 Annealing (i) a ,IS 10810 (P-1) 1984
& WIRES Working Voltages from 3.3 kV up to and Including
Cl 1 to 11.2
33 kV
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = Measurment of the
ELECTRICAL- CABLES IEC 60502-2 Cl 16.1 a &
730 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables electrical resistance of
& WIRES 16.2
for rated voltages from 6 kV (Um = 7,2 kV) up to conductor
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
Test for determining the IEC 60502-2:2014 Cl
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES mechnical properties of 19.6,,IEC 60811-501
731 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES non -metal sheath before :2012 Cl 4.2.6
for rated voltages from 6 kV (Um = 7,2 kV) up to
& after ageing Elongation Amendment -1
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = Additional ageing test on
ELECTRICAL- CABLES IEC 60502-2:2014 Cl
732 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables piece of complete cable ,
& WIRES 19.7.,IEC 60811-401 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to Tensile Strength
30 kV (Um = 36 kV) .

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 46 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Power cables with extruded insulation and their

accessories for rated voltages from 1 kV (Um = IEC 60502-2:2014 Cl
ELECTRICAL- CABLES Flame spread test on
733 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables 19.16,IEC 60332-1-2:2004
& WIRES single cable.
for rated voltages from 6 kV (Um = 7,2 kV) up to Amd 1
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
IEC 60502-2:2014 Cl
accessories for rated voltages from 1 kV (Um = Heat Shock test on
ELECTRICAL- CABLES 19.11 , IEC
734 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables insulation & non metallic
& WIRES 60811-509:2012 Cl 4,
for rated voltages from 6 kV (Um = 7,2 kV) up to Sheath
amendment 1
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Measurment of the IEC 60502-2:2014 Cl
735 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES External Diameter 17.8,IEC 60811-203 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Shrinkage test on IEC 60502-2:2014 Cl
736 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES insulation 19.18,IEC-60811-502 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Shrinkage test on PE IEC 60502-2:2014 Cl
737 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES outer sheaths 19.22,IEC -60811-503 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Strippability test on
738 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables IEC 60502-2 Cl19.23.2
& WIRES insulation screen
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
Test for determining the
accessories for rated voltages from 1 kV (Um = IEC 60502-2:2014 Cl 19.5
ELECTRICAL- CABLES mechnical properties of
739 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables ,IEC 60811-501, Cl 4.2.6
& WIRES insulation before & after
for rated voltages from 6 kV (Um = 7,2 kV) up to Amendment-1
ageing( Tensile Strength
30 kV (Um = 36 kV),

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 47 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Power cables with extruded insulation and their

accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Water Absorption Test for IEC 60502-2:2014 Cl
740 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES Insulation 19.15,IEC 60811-402 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
Hot set test (%) for
accessories for rated voltages from 1 kV (Um = IEC 60502-2:2014 Cl
ELECTRICAL- CABLES EPR,HEPR, and XLPE
741 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables 19.13 &
& WIRES Insulation and
for rated voltages from 6 kV (Um = 7,2 kV) up to 17.10,IEC-60811-507,Cl 4
Elastomeric sheaths
30 kV (Um = 36 kV).
Power cables with extruded insulation and their Test for determining the
accessories for rated voltages from 1 kV (Um = mechnical properties of IEC 60502-2:2014 Cl 19.6,
ELECTRICAL- CABLES
742 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables non -metal sheath before IEC 60811-501:2012 Cl
& WIRES
for rated voltages from 6 kV (Um = 7,2 kV) up to & after ageing ( Tensile 4.2.6 Amendment-1
30 kV (Um = 36 kV). Strength
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = Pressure test at high IEC 60502-2:2014 Cl 19.9
ELECTRICAL- CABLES
743 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables temperature on insulation ,IEC 60811-508 2012 Cl 4
& WIRES
for rated voltages from 6 kV (Um = 7,2 kV) up to and non metallic sheath Amendment-1
30 kV (Um = 36 kV).
Power cables with extruded insulation and their
IEC 60502-2:2014 Cl
accessories for rated voltages from 1 kV (Um = Conditioning and
ELECTRICAL- CABLES 19.6.3,IEC
744 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables mechnical test Ageing In
& WIRES 60811-401:2012 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to Air Oven
Amendment-1
30 kV (Um = 36 kV).
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Loss of mass on PVC IEC 60502-2:2014 Cl
745 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES sheath 19.8,IEC 60811-409 : Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV).
IS 14255: 1995 Cl 10.1 a,
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Tensile Strength on
746 IS 10810 (P-2) ,Cl 1 to
& WIRES and including 1100 Volts Aluminum Conductor
11.2
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto IS 14255: 1995 Cl 10.4,IS
747 Bending Test
& WIRES and including 1100 Volts 10810 (P-32)
IS 14255: 1995 Cl 10.1 b
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Breaking Load on
748 ,IS 10810 (P-2) Cl 1 to
& WIRES and including 1100 Volts Messanger Conductor
11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 48 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 14255: 1995 Cl 10.1 d

ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
749 Carbon Black Content (iii),IS 10810 (P-32) Cl 1
& WIRES and including 1100 Volts
to 11.3
IS 14255: 1995 Cl 10.1 c
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Carbon Black Content on
750 (vi) 1, IS 10810 (P-32) Cl
& WIRES and including 1100 Volts XLPE Insulation
1 to 11.3
IS 14255:1995 Cl 10.1 a
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
751 Conductor Resistance (III) , IS 10810 (P-5) Cl 1
& WIRES and including 1100 Volts
to 11.2 Table-1
IS 14255:1995 Cl 10.1 b
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Conductor Resistance On
752 (III), IS 10810 (P-5) Cl 1 to
& WIRES and including 1100 Volts Messanger Conductor
11.2 Table-1
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Dispersion In IS 14255: 1995 Cl 10.1 d
753
& WIRES and including 1100 Volts Polyethylene Materials (iii) 2,IS 2530:196 Cl 16.1
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Dispersion In XLPE IS 14255: 1995 Cl 10.1 c
754
& WIRES and including 1100 Volts Materials (vi) 2,IS 2530 Cl 16.1
IS 14255: 1995 Cl 10.1 d
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Elongation at Break on
755 (i),IS 10810 (P-7) , Cl 1 to
& WIRES and including 1100 Volts Insulation
11.2
Elongation Test On
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
756 Messanger Conductor IS 14255; Cl 11.3
& WIRES and including 1100 Volts
(Before Stranding)
IS 14255: 1995 Cl
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
757 High Voltage Test 10.1g,IS 10810 (P-45) Cl 1
& WIRES and including 1100 Volts
to 11.2
IS 14255: 1995 Cl 10.1 c
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
758 Hot Set on load (iii) , IS 10810 (P-30) Cl 1
& WIRES and including 1100 Volts
to 11.2
IS 14255: 1995 Cl 10.1
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Insulation Resistance (
759 f,IS 10810 (P-43) Cl 1 to
& WIRES and including 1100 Volts Volume Resistivity)
11.2
IS 14255: 1995 Cl 10.1 d
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
760 Melt Flow index (MFI) (ii), IS 10810 (P-11) Cl 1
& WIRES and including 1100 Volts
to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 49 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 14255: 1995 Cl 10.1 c

ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
761 Permanent Set (iii),IS 10810 (P-30) Cl 1
& WIRES and including 1100 Volts
to 11.2
IS 14255: 1995 Cl 10.1 c
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto
762 Shrinkage Test (%) iv),IS 10810 (P-12)Cl 1 to
& WIRES and including 1100 Volts
11.3
IS 14255: 1995 Cl 10.1 d
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Tensile Strength on
763 (i),IS 10810 (P-7) Cl 1 to
& WIRES and including 1100 Volts Insulation
11.2
IS 14255: 1995 Cl 10.1
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Tensile strength on
764 c(i) , IS 10810 (P-7) Cl 1
& WIRES and including 1100 Volts Insulation
to 11.2
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Tensile Strength on IS 14255: 1995, IS 10810
765
& WIRES and including 1100 Volts Insulation (P-7) :1984 Cl 1 to 11.2
IS 14255: 1995 Cl 10.1
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Test For Thickness Of
766 e,IS 10810 (P-6) Cl 1 to
& WIRES and including 1100 Volts Insulation
11.2
IS 14255: 1995 Cl 10.1 c
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Thermal Ageing In Air
767 (II) ,IS 10810 (P-11) Cl 1
& WIRES and including 1100 Volts Oven On Insulation
to 11.2
IS 14255: 1995 , ISO
4892-1: 2016, ASTM G
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Ultravoilet Test (UV)
768 154: Cl 1 to 12 Annexure
& WIRES and including 1100 Volts Complete, Elongation
and Appendix, Table-1, 2,
X 2.1, X 3.2
IS 14255: 1995 , ASTM G
Ultravoilet Test (UV)
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto 154: Cl 1 to 12 Annexure
769 Complete, Tensile
& WIRES and including 1100 Volts and Appendix, Table-1, 2,
Strength
X 2.1, X 3.2
IS 14255: 1995 Cl 10.1 c
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto Water Absorption by
770 (v),IS 10810 (P-33) Cl 1 to
& WIRES and including 1100 Volts Gravimetric Method
11.2
ELECTRICAL- CABLES Ariel Bunched Cables -For Working Voltages upto IS 14255:1995 ,IS 10810
771 Wrapping Test
& WIRES and including 1100 Volts (P-3): Cl 1 to 11.2
ELECTRICAL- CABLES Effect Of Cooling On IS 2465 Cl 12.4 (a) & Cl
772 Cable For Motor Vehicles
& WIRES Flexibility 21

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 50 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 2465 :1984 Cl 12.4

ELECTRICAL- CABLES
773 Cable For Motor Vehicles Flamability (b),IS 10810 (P-53) Cl 1 to
& WIRES
11.3
IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES Hot Deformation Test on
774 Cable For Motor Vehicles 4,IS 10810 (P-15) Cl 1 to
& WIRES Insulation and Sheath
11.3
IS 2465 :1984 Cl 12.1
ELECTRICAL- CABLES
775 Cable For Motor Vehicles Persulphate Test (b),IS 10810 (P-4) Cl 1 to
& WIRES
11.3
IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES Shrinkage Test on
776 Cable For Motor Vehicles 6, IS 10810 (P-12) Cl 1 to
& WIRES Insulation and Sheath
11.3
IS 2465 :1984 Cl 12.1
ELECTRICAL- CABLES Tensile Strength on
777 Cable For Motor Vehicles (f),IS 10810 (P-7) Cl 1 to
& WIRES Elastomeric Insulation
11.2
IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES Tensile Strength on
778 Cable For Motor Vehicles 1,IS 10810 (P-7) Cl 1 to
& WIRES Insulation and Sheath
11.2
IS 2465 :1984 Cl 12.1 (f)
ELECTRICAL- CABLES Ageing In Oxygen Bomb
779 Cable For Motor Vehicles 3,IS 10810 (P-16) Cl 1 to
& WIRES on Elastomeric Insulation
11.3
IS 2465 :1984 Cl 12.1
ELECTRICAL- CABLES
780 Cable For Motor Vehicles Conductor Resistance (c),IS 10810 (P-5) Cl 1 to
& WIRES
11.2 Table-1
IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES Elongation at Break on
781 Cable For Motor Vehicles 1, IS 10810 (P-7) Cl 1 to
& WIRES Insulation
11.2
IS 2465 :1984 Cl 12.1 (f)
ELECTRICAL- CABLES Elongation on Elastomeric
782 Cable For Motor Vehicles 1,IS 10810 (P-7) Cl 1 to
& WIRES Insulation
11.2
IS 2465 :1984 Cl 12.4
ELECTRICAL- CABLES
783 Cable For Motor Vehicles Flammability Test (b),IS 10810 (P-53) Cl 1 to
& WIRES
11.3
IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES Heat Shock Test On
784 Cable For Motor Vehicles 5IS 10810 (P-14) Cl 1 to
& WIRES Insulation and Sheath
11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 51 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 2465 :1984 Cl 12.1 (g)

ELECTRICAL- CABLES
785 Cable For Motor Vehicles High Voltage Test ,IS 10810 (P-45) Cl 1 to
& WIRES
11.2
IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES Loss Of Mass In Air Oven
786 Cable For Motor Vehicles 3,IS 10810 (P-10) Cl 1 to
& WIRES on Insulation and Sheath
11.3
Test For Thickness of IS 2465 :1984 Cl 12.1
ELECTRICAL- CABLES
787 Cable For Motor Vehicles Insulation and Sheath and (d),IS 10810 (P-6) Cl 1 to
& WIRES
Other Dimension Checks 11.2
Thermal Ageing In Air IS 2465 :1984 Cl 12.1 (f)
ELECTRICAL- CABLES
788 Cable For Motor Vehicles Oven On Elastomeric 2,IS 10810 (P-11) Cl 1 to
& WIRES
Insulation and Sheath 11.2
Thermal Ageing In Air IS 2465 :1984 Cl 12.1 (e)
ELECTRICAL- CABLES
789 Cable For Motor Vehicles Oven On Insulation and 2,IS 10810 (P-11) Cl 1 to
& WIRES
Sheath 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) Cl 15.1,a
ELECTRICAL- CABLES
790 Sheathed Cables, for Working Voltages upto and Annealing (i),IS 10810 (P-1) Cl 1 to
& WIRES
including 1100 Volts 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Dimensions of Armour
791 Sheathed Cables, for Working Voltages upto and 13.3,IS 10810 (P-36) Cl 1
& WIRES Material
including 1100 Volts to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
792 Sheathed Cables, for Working Voltages upto and Mass Of Zinc Coating 13.6 f,IS 10810 (P-41) Cl 1
& WIRES
including 1100 Volts to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES
793 Sheathed Cables, for Working Voltages upto and Temperature index 16.9,IS 10810 (P-64),Cl 1
& WIRES
including 1100 Volts to 10.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES Thermal Stability Test on
794 Sheathed Cables, for Working Voltages upto and 15.1 e (vii), IS 10810
& WIRES Sheath
including 1100 Volts (P-60): Cl 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC
ELECTRICAL- CABLES Armour Coverage IS 7098 (P-1) 1988, Cl
795 Sheathed Cables, for Working Voltages upto and
& WIRES Percentage 13.1.2 Appendix-C
including 1100 Volts
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Cold Bend Test for Outer
796 Sheathed Cables, for Working Voltages upto and 15.4 a,IS 10810 (P-20) Cl
& WIRES Sheath
including 1100 Volts 1 to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 52 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl

ELECTRICAL- CABLES
797 Sheathed Cables, for Working Voltages upto and Cold Impact Test 15.4 b,IS 10810 (P-21) Cl
& WIRES
including 1100 Volts 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES
798 Sheathed Cables, for Working Voltages upto and Conductor Resistance 15.1 a (iv) IS 10810 (P-5):
& WIRES
including 1100 Volts Cl 1 to 11.2, Table-1
IS 7098 (P-1) :1988 ,Cl
Cross Linked Polyethylene (XLPE) Insulated PVC
ELECTRICAL- CABLES 16.10 ASTM D 2843 Cl 1
799 Sheathed Cables, for Working Voltages upto and Density Of Smoke
& WIRES to 16 Table-1 & 2
including 1100 Volts
Appendix
Cross Linked Polyethylene (XLPE) Insulated PVC Elongation at Break on IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
800 Sheathed Cables, for Working Voltages upto and Armour Wire /Formed 13.6 b,IS 10810 (P-37) cl
& WIRES
including 1100 Volts Wire Strip 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Elongation at Break on
801 Sheathed Cables, for Working Voltages upto and 15.1 d (i) ,IS 10810 (P-7) :
& WIRES Insulation
including 1100 Volts Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES Flame Retardance Test
802 Sheathed Cables, for Working Voltages upto and 16.6, IS 10810 (P-62)::Cl 1
& WIRES On Bunched Cables
including 1100 Volts to 12.1, Annexure-A (6.1)
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988, Cl
ELECTRICAL- CABLES Flame Retardance Test
803 Sheathed Cables, for Working Voltages upto and 16.5, IS 10810 (P-61),Cl 1
& WIRES On Single Cable
including 1100 Volts to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES
804 Sheathed Cables, for Working Voltages upto and Flammability 15.1 h IS 10810 (P-53):Cl
& WIRES
including 1100 Volts 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES
805 Sheathed Cables, for Working Voltages upto and Flammability 15.1 h, IS 10810 (P-53) ,
& WIRES
including 1100 Volts Cl 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES Halogen Acid gas
806 Sheathed Cables, for Working Voltages upto and 16.8 IS 10810 (P-59): Cl 1
& WIRES Evolution Test
including 1100 Volts to 12.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988, Cl
ELECTRICAL- CABLES Heat Shock Test On
807 Sheathed Cables, for Working Voltages upto and 15.1 e (vi) ,IS 10810
& WIRES Sheath
including 1100 Volts (P-14): Cl 1 to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 53 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988, Cl

ELECTRICAL- CABLES
808 Sheathed Cables, for Working Voltages upto and High Voltage Test 15.1 g, IS 10810 (P-45): Cl
& WIRES
including 1100 Volts 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES Hot Deformation Test on
809 Sheathed Cables, for Working Voltages upto and 15.1 e (v), IS 10810
& WIRES Sheath
including 1100 Volts (P-15): 1 Cl 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
810 Sheathed Cables, for Working Voltages upto and Hot Set on load 15.1 d (iii) IS 10810 (P-30)
& WIRES
including 1100 Volts :Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES Insulation Resistance (
811 Sheathed Cables, for Working Voltages upto and 15.1 f,IS 10810 (P-43):Cl 1
& WIRES Volume Resistivity)
including 1100 Volts to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES
812 Sheathed Cables, for Working Voltages upto and Loss Of Mass In Air Oven 15.1 e (iii), IS 10810
& WIRES
including 1100 Volts (P-10): Cl 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES
813 Sheathed Cables, for Working Voltages upto and Oxygen Index Test 16.4 IS 10810 (P-58):,Cl 1
& WIRES
including 1100 Volts to 11
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
814 Sheathed Cables, for Working Voltages upto and Permanent Set 15.1 d (iii), IS 10810
& WIRES
including 1100 Volts (P-30) Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES Resistance Test For
815 Sheathed Cables, for Working Voltages upto and 15.4 c, IS 10810 (P-42):Cl
& WIRES Armour
including 1100 Volts 1 to 11.2, Table-1
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
816 Sheathed Cables, for Working Voltages upto and Resistivity of Steel Wire 13.6 g,IS 10810 (P 42) Cl
& WIRES
including 1100 Volts 1 to 11.2 Table-1
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988, Cl
ELECTRICAL- CABLES
817 Sheathed Cables, for Working Voltages upto and Shrinkage Test 15.1 d (iv) IS 10810
& WIRES
including 1100 Volts (P-12):Cl 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES
818 Sheathed Cables, for Working Voltages upto and Shrinkage Test on Sheath 15.1 e (iv), IS 10810
& WIRES
including 1100 Volts (P-12):Cl 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES
819 Sheathed Cables, for Working Voltages upto and Smoke Density 16.10, IS 10810 (P-63),Cl
& WIRES
including 1100 Volts 1 to 11.2, Annexure-A,

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 54 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Cross Linked Polyethylene (XLPE) Insulated PVC Tensile Strength on IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
820 Sheathed Cables, for Working Voltages upto and Armour Wire /Formed 13.6 a ,IS 10810 (P-37) Cl
& WIRES
including 1100 Volts Wire Strip 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988, Cl
ELECTRICAL- CABLES Tensile Strength on
821 Sheathed Cables, for Working Voltages upto and 15.1 e (i), IS 10810 (P-7)
& WIRES Sheath
including 1100 Volts Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Tensile Strength on
822 Sheathed Cables, for Working Voltages upto and 15.1 a (ii),IS 10810 (P-2)
& WIRES Aluminum Conductor
including 1100 Volts Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Tensile Strength on
823 Sheathed Cables, for Working Voltages upto and 15.1 d (i) IS 10810 (P-7)
& WIRES Insulation
including 1100 Volts :1984 Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Test For Thickness Of
824 Sheathed Cables, for Working Voltages upto and 15.1 c) IS 10810 (P-6) :Cl
& WIRES Insulation and Sheath
including 1100 Volts 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Thermal Ageing In Air
825 Sheathed Cables, for Working Voltages upto and 15.1 d (ii) , IS 10810
& WIRES Oven On Insulation
including 1100 Volts (P-11): Cl 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 , Cl
ELECTRICAL- CABLES Thermal Ageing In Air
826 Sheathed Cables, for Working Voltages upto and 15.1 e (ii) IS 10810 (P-11)
& WIRES Oven On Sheath
including 1100 Volts CL 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Torsion Test For Round
827 Sheathed Cables, for Working Voltages upto and 13.6 c,IS 10810 (P-38)Cl 1
& WIRES Wires
including 1100 Volts to 11.3
IS 7098 (P-1) :1988,ASTM
Cross Linked Polyethylene (XLPE) Insulated PVC Ultravoilet Test (UV)
ELECTRICAL- CABLES G 154 Cl 1 to 12
828 Sheathed Cables, for Working Voltages upto and Complete, Tensile
& WIRES Annexure and Appendix,
including 1100 Volts Strength
Table-1, 2, X 2.1, X 3.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES Uniformity Of Zinc
829 Sheathed Cables, for Working Voltages upto and 13.6 e,IS 10810 (P-40), Cl
& WIRES Coating
including 1100 Volts 1 to 11.2
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 ,Cl
ELECTRICAL- CABLES Water Absorption by
830 Sheathed Cables, for Working Voltages upto and 15.1 d iv, IS 10810 (P-33)
& WIRES Gravimetric Method
including 1100 Volts Cl 1 to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 55 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl

ELECTRICAL- CABLES Winding Test For Formed
831 Sheathed Cables, for Working Voltages upto and 13.6 d,IS 10810 (P-39) Cl
& WIRES Wires
including 1100 Volts 1 to 11.3
Cross Linked Polyethylene (XLPE) Insulated PVC IS 7098 (P-1) :1988 Cl
ELECTRICAL- CABLES
832 Sheathed Cables, for Working Voltages upto and Wrapping 15.1 a (iii),IS 10810 (P3),
& WIRES
including 1100 Volts Cl 1 to 11.2
IS 7098 (P-1) 1984,ASTM
Cross Linked Polyethylene (XLPE) Insulated PVC
ELECTRICAL- CABLES Ultravoilet Test (UV) G 154:Cl 1 to 12
833 Sheathed Cables, for Working Voltages upto and
& WIRES Complete Annexure and Appendix,
including 1100 Volts .
Table-1, 2, X 2.1, X 3.2
Crosslinked Polyethylene Insulated
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Eccentricity and Ovality IS 7098 (P-2) :2011 Cl
834
& WIRES Working Voltages from 3.3 kV up to and Including on Insulation 19.1 (iv)
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
835 Elongation on Sheath 19.1 (vi) a ,IS 10810 (P-7),
& WIRES Working Voltages from 3.3 kV up to and Including
Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Halogen Acid gas
836 19.2.1 (d), IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Evolution Test
(P-59) Cl 1 to 12.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
837 Loss Of Mass In Air Oven 19.1 (vi) e, IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including
(P-10) , Cl 1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Resistance Test For
838 19.3 d, IS 10810 (P-42) Cl
& WIRES Working Voltages from 3.3 kV up to and Including Armour
1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
839 Carbon Black Content 19.1 (vi) h , IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including
(P-32): Cl 1 to 11.3
33 kV

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 56 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Crosslinked Polyethylene Insulated

IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
840 Cold Impact Test 19.4 , IS 10810 (P-21): Cl
& WIRES Working Voltages from 3.3 kV up to and Including
1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2): 2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
841 Conductor Resistance 19.1 d IS 10810 (P-5): Cl 1
& WIRES Working Voltages from 3.3 kV up to and Including
to 11.2 Table-1
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Dimensions of Armour
842 19.1 (ii), IS 10810 (P-36)
& WIRES Working Voltages from 3.3 kV up to and Including Material
Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011, Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Elongation at Break on
843 19.1 (iii),IS 10810 (P-7):Cl
& WIRES Working Voltages from 3.3 kV up to and Including Insulation
1 to 11.2
33 kV
Crosslinked Polyethylene Insulated IS 7098 (P-2) :2011, Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Elongation on Armour 17.6.2, 19.1.3e and
844
& WIRES Working Voltages from 3.3 kV up to and Including Wire /Formed Wire Strip 19.4.5c: , IS 10810 (P-37)
33 kV Cl 1 to 11.2
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
845 Flamability 19.1 (xv), IS 10810 (P-53)
& WIRES Working Voltages from 3.3 kV up to and Including
Cl 1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Flame Retardance Test
846 19.2.1 (b), IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including On Single Cable
(P-61) Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
847 Flammability 19.1 (xv) ,IS 10810 (P-53)
& WIRES Working Voltages from 3.3 kV up to and Including
Cl 1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Heat Shock Test On
848 19.1 (vi) f, IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Sheath
(P-14) Cl 1 to 11.3
33 kV

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 57 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Crosslinked Polyethylene Insulated

IS 7098 (P-2) :2011, Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Hot Deformation Test on
849 19.1 (vi) d ,IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Sheath
(P-15): Cl 1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
850 Hot Set on load 19.1 (iii) d ,IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including
(P-30) Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Insulation Resistance (
851 19.1 (xi), IS 10810 (P-43)
& WIRES Working Voltages from 3.3 kV up to and Including Volume Resistivity)
Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
852 Mass Of Zinc Coating 17.6.6 ,IS 10810 (P-41),Cl
& WIRES Working Voltages from 3.3 kV up to and Including
1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
853 Permanent Set 19.1 (iii) d, IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including
(P-30): Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
854 Resistivity of Steel Wire 17.6.7 , IS 10810 (P-42)
& WIRES Working Voltages from 3.3 kV up to and Including
,Cl 1 to 11.2 Table-1
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
855 Shrinkage Test 19.1 (iii) e IS 10810 (P-12)
& WIRES Working Voltages from 3.3 kV up to and Including
Cl 1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
856 Shrinkage Test on Sheath 19.1 (vi) c, IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including
(P-11) Cl 1 to 11.3
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
857 Temperature index 19.2.2 (d) IS 10810 (P-64)
& WIRES Working Voltages from 3.3 kV up to and Including
:Cl 1 to 10.2
33 kV

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 58 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Crosslinked Polyethylene Insulated

IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Tensile Strength on
858 19.1 b, IS 10810 (P-2): Cl
& WIRES Working Voltages from 3.3 kV up to and Including Aluminum Conductor
1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
Tensile Strength on IS 7098 (P-2) :2011l Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
859 Armour Wire /Formed 17.6. IS 10810 (P-37),Cl 1
& WIRES Working Voltages from 3.3 kV up to and Including
Wire Strip to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Tensile Strength on
860 19.1 (iii) a ,IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Insulation
(P-7):Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 ,Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Tensile Strength on
861 19.1 (vi) a ,IS 10810 (P-7):
& WIRES Working Voltages from 3.3 kV up to and Including Sheath
Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated Test For Strippability Of
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Semi Conducting
862 13.3 Annexure-B, Cl 19.1
& WIRES Working Voltages from 3.3 kV up to and Including Strapable Insulation
(v) a ,
33 kV Screen
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Test For Thickness Of
863 19.1 (iv), IS 10810 (P-6)
& WIRES Working Voltages from 3.3 kV up to and Including Insulation and Sheath
:Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011, Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Thermal Ageing In Air
864 19.1 (iii), IS 10810 (P-11),
& WIRES Working Voltages from 3.3 kV up to and Including Oven On Insulation
Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Thermal Ageing In Air
865 19.1 (vi) b, IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Oven On Sheath
(P-11): Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
Thermal Ageing Test For
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for IS 7098 (P-2) :2011 Cl
866 Complete cable, Variation
& WIRES Working Voltages from 3.3 kV up to and Including 19.1 (vii) h , 20.9 ,
in Elongation
33 kV

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 59 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Crosslinked Polyethylene Insulated

Thermal Ageing Test For
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for IS 7098 (P-2) Cl 19.1&
867 Complete cable, Variation
& WIRES Working Voltages from 3.3 kV up to and Including 20.9
in Tensile Strength
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Torsion Test For Round
868 17.6.3 ,IS 10810 (P-38) Cl
& WIRES Working Voltages from 3.3 kV up to and Including Wires
1 to 11.3
33 kV
Crosslinked Polyethylene Insulated IS 7098 (P-2):2011, A STM
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Ultravoilet Test (UV) G 154: Cl 1 to 12
869
& WIRES Working Voltages from 3.3 kV up to and Including Complete ( Elongation) Annexure and Appendix,
33 kV Table-1, 2, X 2.1, X 3.2
Crosslinked Polyethylene Insulated IS 7098 (P-2) :2011, A
Ultravoilet Test (UV)
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for STM G 154:Cl 1 to 12
870 Complete, Tensile
& WIRES Working Voltages from 3.3 kV up to and Including Annexure and Appendix,
Strength
33 kV Table-1, 2, X 2.1, X 3.2
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Uniformity Of Zinc
871 17.6.5 ,IS 10810 (P-40), Cl
& WIRES Working Voltages from 3.3 kV up to and Including Coating
1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
Volume Resistivity Test IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
872 on Extruded Semi 19.1 (vii) Cl 20.9
& WIRES Working Voltages from 3.3 kV up to and Including
Conducting Screen Annexure-E
33 kV
Crosslinked Polyethylene Insulated
Volume Resistivity Test IS 7098 (P-2) 2011, Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
873 on Extruded Semi 19.1 (v) b, & Cl 20.9
& WIRES Working Voltages from 3.3 kV up to and Including
Conducting Screen Annexure-E
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Water Absorption by
874 19.1 (iii) f , IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Gravimetric Method
(P-33) Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011, Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Winding Test For Formed
875 17.6.4, IS 10810 (P-39) Cl
& WIRES Working Voltages from 3.3 kV up to and Including Wires
1 to 11.3
33 kV

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 60 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Crosslinked Polyethylene Insulated

ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Wrapping Test on IS 7098 (P-2) Cl 19.1 c ,IS
876
& WIRES Working Voltages from 3.3 kV up to and Including Aluminum Wire 10810 (P-3):Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
877 Smoke Density 19.1 (e), IS 10810 (P-63)
& WIRES Working Voltages from 3.3 kV up to and Including
Cl 1 to 11.2
33 kV
Crosslinked Polyethylene Insulated IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for 19.1 (e), IS 13360
878 Density Of Smoke
& WIRES Working Voltages from 3.3 kV up to and Including (P-6/Sec-9) ,Cl 1 to 10
33 kV Table-1 & 2 Appendix
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for
879 Oxygen Index Test 19.2.1 (a), IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including
(P-58) Cl 1 to 11
33 kV
Crosslinked Polyethylene Insulated
IS 7098 (P-2) :2011 Cl
ELECTRICAL- CABLES Thermoplastics Sheathed Cables - Part 2 for Thermal Stability Test on
880 19.1 (vi) g, IS 10810
& WIRES Working Voltages from 3.3 kV up to and Including Sheath
(P-60) Cl 1 to 11.3
33 kV
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables For Working Voltages
881 Annealing a (i) , IS 10810 (P-1) Cl 1
& WIRES From 3.3 kV Upto And Including 33 kV
to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables For Working Voltages Tensile Strength on
882 a (ii), IS 10810 (P-2) :Cl 1
& WIRES From 3.3 kV Upto And Including 33 kV Aluminum Conductor
to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables For Working Voltages Wrapping on Aluminum
883 a (ii),i IS 10810 (P3):Cl 1
& WIRES From 3.3 kV Upto And Including 33 kV Wire
to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Ageing In Air Bomb on
884 c (5), IS 10810 (P-56) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Insulation And Sheath
to 11.3
IS 9968 (P-2) 2002 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
885 Conductor Resistance 22.1a (iv) , IS 10810 (P-5)
& WIRES From 3.3 kV upto and including 33 kV
: Cl 1 to 11.2 , Table-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 61 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 9968 (P-2) 2002 Cl 22.1

ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
886 Diameter of Armour Wire b (i) IS 10810 (P-36):Cl 1
& WIRES From 3.3 kV upto and including 33 kV
to 11.2,
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Elongation (%) on
887 c (2),IS 10810 (P-7) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Insulation and Sheath
to 11.2
Elongation at Break on IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables For Working Voltages
888 Armour Wire /Formed b (ii), IS 10810 (P-37) Cl 1
& WIRES From 3.3 kV Upto And Including 33 kV
Wire Strip to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
889 Flammability Test (n) IS 10810 (P-53): Cl 1
& WIRES From 3.3 kV upto and including 33 kV
to 11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
890 Flammability Test (n) IS 10810 (P-53) Cl 1 to
& WIRES From 3.3 kV upto and including 33 kV
11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Heat Shock Test On
891 c (11) , IS 10810 (P-14):Cl
& WIRES From 3.3 kV upto and including 33 kV Insulation & Sheath
1 to 11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
892 High Voltage Test (k), IS 10810 (P-45) Cl 1
& WIRES From 3.3 kV upto and including 33 kV
to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Hot Set (%) on load on
893 C (5), IS 10810 (P-30) 1 Cl
& WIRES From 3.3 kV upto and including 33 kV Insulation And Sheath
1 to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Hot Set (Permanent Set)
894 c (5), IS 10810 ( P-30) Cl
& WIRES From 3.3 kV upto and including 33 kV On Insulation And Sheath
1 to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
895 Insulation Resistance d,IS 10810 (P-43)Cl 1 to
& WIRES From 3.3 kV upto and including 33 kV
11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
896 Loss Of Mass In Air Oven c (10), IS 10810 (P-10) Cl
& WIRES From 3.3 kV upto and including 33 kV
1 to 11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Mass Of Zinc Coating on
897 b (v),IS 10810 (P-41) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Steel Armour
to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 62 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 9968 (P-2) 2002 Cl 22.1

ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
898 Oil Resistance c (6),IS 10810 (P-31) Cl 1
& WIRES From 3.3 kV upto and including 33 kV
to 11.2
IS 9968 (P-2) 2002 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
899 Persulphate Test 22.1a (v),IS 10810 (P-4)
& WIRES From 3.3 kV upto and including 33 kV
Cl 1 ro 11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Shrinkage Test on
900 C (8),IS 10810 (P-12) Cl 1
& WIRES From 3.3 kV upto and including 33 kV insulation and Sheath
to 11.3
Tear Resistance Test IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
901 (N/mm) for Heavy Duty c (7),IS 10810 (P-17) Cl 1
& WIRES From 3.3 kV upto and including 33 kV
Sheath to 11.3
Tensile Strength on IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
902 Armour Wire /Formed b (ii), IS 10810 (P-37) Cl 1
& WIRES From 3.3 kV upto and including 33 kV
Wire Strip (N/mm²) to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Tensile Strength on
903 c (2), IS 10810 (P-7) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Insulation
to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Test For Thickness Of
904 c (1), IS 10810 (P-6) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Insulation and Sheath
to 11.2
Thermal Ageing In Air IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
905 Oven On Insulation and c (3), IS 10810 (P-11) Cl 1
& WIRES From 3.3 kV upto and including 33 kV
Sheath to 11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Thermal Stability Test on
906 C (12) ,IS 10810 (P-60) Cl
& WIRES From 3.3 kV upto and including 33 kV Sheath
1 to 11.3
Torsion Test For Round IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
907 Wires, Galvanised Steel b(iii) IS 10810 (P-38) Cl 1
& WIRES From 3.3 kV upto and including 33 kV
Wires to 11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Uniformity Of Zinc
908 b (v)10810 (P-40) Cl 1 to
& WIRES From 3.3 kV upto and including 33 kV Coating on Steel Armour
11.2
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Water Absorption
909 (m), IS 10810 (P-28) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Electrical
to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 63 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 9968 (P-2) 2002 Cl 22.1

ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Winding Test For Formed
910 b (iv),IS 10810 (P-39) Cl 1
& WIRES From 3.3 kV upto and including 33 kV Wires
to 11.3
IS 9968 (P-2) 2002 Cl 22.1
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Hot Deformation Test on
911 c (9),IS 10810 (P-15) Cl 1
& WIRES From 3.3 kV upto and including 33 kV. insulation and Sheath
to 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
912 Annealing 21.1IS 10810 (P-1) Cl 1 to
& WIRES upto and including 1100 Volts
11.2 2014
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
913 Conductor Resistance 21.1,IS 10810 (P-5) Cl 1 to
& WIRES upto and including 1100 Volts
11.2 Table-1
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Elongation at Break on
914 21.1(a),IS 10810 (P-7) Cl
& WIRES upto and including 1100 Volts Insulation and Sheath
1 to 11.2
Elongation: on Insulation IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
915 Accelrated Ageing Test by 21.1(c), IS 10810 (P-56)
& WIRES upto and including 1100 Volts
air pressure method Cl 1 to 11.3
Elongation: on Insulation IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
916 Accelrated Ageing Test by 21.1(d),IS 10810 (P-16) Cl
& WIRES upto and including 1100 Volts
Oxygen pressure method 1 to 11.3
Elongation: on Sheath IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
917 Accelrated Ageing Test by 21.1(d),IS10810 (P-16) Cl
& WIRES upto and including 1100 Volts
Oxygen pressure 1 to 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
918 Flammability 21.1 & 22.3,IS 10810
& WIRES upto and including 1100 Volts
(P-53) Cl 1 to 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
919 Flammability 21.1 & 22.3,IS 10810
& WIRES upto and including 1100 Volts
(P-53),Cl 1m to 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
920 High Voltage Test. 12.1 & 22.2,IS 10810
& WIRES upto and including 1100 Volts
(P-45) Cl 1 to 11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
921 Hot Set (Permanent Set) 21.1.(e),IS 10810 ( P-30)
& WIRES upto and including 1100 Volts
Cl 1 to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 64 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 9968 (P-1) :1988 Cl

ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
922 Hot Set on load 21.1.(e),IS 10810 (P-30)
& WIRES upto and including 1100 Volts
Cl 1 to 11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
923 Insulation Resistance 21.1.,IS 10810 (P-43) Cl 1
& WIRES upto and including 1100 Volts
to 11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
924 Oil Resistance 21.1.(f),IS 10810 (P-31) Cl
& WIRES upto and including 1100 Volts
1 to 11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
925 Persulphate Test 21.1.,IS 10810 (P-4) Cl 1
& WIRES upto and including 1100 Volts
ro 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
926 Tear Resistance Test 21.1.(g),IS 10810 (P-17)
& WIRES upto and including 1100 Volts
Cl 1 to 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Tensile Strength on
927 21.1.(a),IS 10810 (P-7) Cl
& WIRES upto and including 1100 Volts Sheath
1 to 11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Tensile Strength on
928 21.1,IS 10810 (P-2) Cl 1 to
& WIRES upto and including 1100 Volts Aluminum Conductor
11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Tensile Strength on
929 21.1.(a),IS 10810 (P-7) Cl
& WIRES upto and including 1100 Volts Insulation
1 to 11.2
Tensile Strength on
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Insulation and Sheath
930 21.1.(d),IS 10810 (P-16)
& WIRES upto and including 1100 Volts Accelrated Ageing Test by
Cl 1 to 11.3
Oxygen pressure method
IS 9968 (P-1):1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Thermal Ageing In Air
931 21.1(b),IS 10810 (P-11) Cl
& WIRES upto and including 1100 Volts Oven On Sheath
1 to 11.2
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Thermal Ageing In Air IS 9968 (P-1) Cl 21.1(b),IS
932
& WIRES upto and including 1100 Volts Oven On Insulation 10810 (P-11) Cl 1 to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 65 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Thermal Ageing In Air

IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Oven On Insulation and
933 21.1.(d)IS 10810 (P-11) Cl
& WIRES upto and including 1100 Volts Sheath Variation in
1 to 11.2
Tensile Strength
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Thickness Of Insulation
934 20.1 ,IS 10810 (P-6):Cl 1
& WIRES upto and including 1100 Volts and Overall Dimensions
to 11.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Thickness Of Sheath and
935 21.1,IS 10810 (P- 6) Cl 1
& WIRES upto and including 1100 Volts Overall Dimensions
to 11.2
IS 9968 (P-1) :1988 ,ASTM
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Ultravoilet Test (UV) G 154 Cl 1 to 12
936
& WIRES upto and including 1100 Volts Complete, Elongation Annexure and Appendix,
Table-1, 2, X 2.1, X 3.2
IS 9968 (P-1) :1988 ,ASTM
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Ultravoilet Test (UV) G 154 Cl 1 to 12
937
& WIRES upto and including 1100 Volts Complete, Elongation Annexure and Appendix,
Table-1, 2, X 2.1, X 3.2
IS 9968 (P-1) :1988 ,ASTM
Ultravoilet Test (UV)
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages G 154: Cl 1 to 12
938 Complete, Tensile
& WIRES upto and including 1100 Volts Annexure and Appendix,
Strength
Table-1, 2, X 2.1, X 3.2
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
939 Water Absorption 21.1,IS 10810 (P-28) Cl 1
& WIRES upto and including 1100 Volts
to 11.3
IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
940 Wrapping (Turns) 21.1,IS 10810 (P-3), Cl 1
& WIRES upto and including 1100 Volts
to 11.2
Tensile Strength: on
IS 9968 (P-1) :1988 2020
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages Sheath Accelrated Ageing
941 Cl 21.1(c),IS 10810 (P-56)
& WIRES upto and including 1100 Volts as per Test by air pressure
Cl 1 to 11.3
method
Elongation: on Sheath IS 9968 (P-1) :1988 Cl
ELECTRICAL- CABLES Elastomer Insulated Cables for working voltages
942 Accelrated Ageing Test by 21.1(c),IS 10810 (P-56) Cl
& WIRES upto and including 1100 Volts.
air pressure method 1 to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 66 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 14494:2019, Cl 26.1 c
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Uniformity Of Zinc
943 (iii),IS 10810 (P-40) Cl 1
& WIRES mines Coating
to 11.2
IS 14494:2019, Cl 26.1 a
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
944 Annealing (i),IS 10810 (P-1) Cl 1 to
& WIRES mines
11.2
IS 14494:2019, Cl 26.1 a
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
945 Conductor Resistance (ii),IS 10810 (P-5) Cl 1 to
& WIRES mines
11.2 Table-1
IS 14494:2019, Cl 26.1 b
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
946 Diameter of Armour Wire (iii),IS 10810 (P-36) Cl 1
& WIRES mines
to 11.2
IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Elongation At Break on
947 (i),IS 10810 (P-7) Cl 1 to
& WIRES mines Insulation
11.2
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Elongation at Break on
948 (i),IS 10810 (P-7) Cl 1 to
& WIRES mines Sheath
11.2
Elongation: on Insulation IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
949 Accelrated Ageing Test by (iii),IS 10810 (P-56) Cl 1
& WIRES mines
air pressure method to 11.3
Elongation: on Sheath IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
950 Accelrated Ageing Test by (ii),IS 10810 (P-56) , Cl 1
& WIRES mines
air pressure method to 11.3
IS 14494:2019, Cl 26.1
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
951 Flammability q,IS 10810 (P-53) Cl 1 to
& WIRES mines
11.3
IS 14494:2019, Cl 26.1
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
952 Flammability q,IS 10810 (P-53) Cl 1 to
& WIRES mines
11.3
IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
953 Hot Set (Permanent Set) (iv), IS 10810 (P-30) Cl 1
& WIRES mines
to 11.2
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
954 Hot Set (Permanent Set) (iii),IS 10810 (P-30)Cl 1 to
& WIRES mines
11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 67 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
955 Hot Set on load (iv),IS 10810 (P-30) Cl 1
& WIRES mines
to 11.2
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
956 Hot Set on load (iii),S 10810 (P-30) Cl 1 to
& WIRES mines
11.2
IS 14494:2019, Cl 26.1 f
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
957 Insulation Resistance ,IS 10810 (P-43) Cl 1 to
& WIRES mines
11.2
IS 14494:2019, Cl 26.1 c
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
958 Mass Of Zinc Coating (iv)IS 10810 (P-40) Cl 1 to
& WIRES mines
11.2
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
959 Oil Resistance (iv),IS 10810 (P-31) Cl 1
& WIRES mines
to 11.2
IS 14494:2019, Cl 26.1
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
960 Resistivity of Steel Wire c(v),IS 10810 (P-42) Cl 1
& WIRES mines
to 11.2
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
961 Tear Resistance Test (v),IS 10810 (P-17) Cl 1 to
& WIRES mines
11.3
Tebnsile Strength and IS 14494:2019, Cl 26.1 c
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
962 Elongation at Break on (i),IS 10810 (P-37) Cl 1 to
& WIRES mines
Armour Wire 11.2
Tensile Strength on
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Sheath Accelrated Ageing
963 (ii),IS 10810 (P-56) Cl 1 to
& WIRES mines Test by air pressure
11.3
method
IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Tensile Strength on
964 (i),IS 10810 (P-7) Cl 1 to
& WIRES mines Insulation
11.2
IS 14494:2019, Cl 26.1 e
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Tensile Strength on
965 (i),IS 10810 (P-7) Cl 1 to
& WIRES mines Sheath
11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 68 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Tensile Strength: on
IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Insulation Accelrated
966 (iii),IS 10810 (P-56)Cl 1 to
& WIRES mines Ageing Test by air
11.3
pressure
Thermal Ageing In Air
IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Oven On Insulation
967 (ii),IS 10810 (P-11) Cl 1 to
& WIRES mines Variation in Tensile
11.2
Strength
Thermal Ageing In Air IS 14494:2019, Cl 26.1 d
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
968 Oven On Insulation (ii),IS 10810 (P-11) Cl 1 to
& WIRES mines
Variation in Elongation 11.2
IS 14494:2019, Cl 26.1 b
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Thickness Of Outer
969 (iv)IS 10810 (P-6) Cl 1 to
& WIRES mines Sheath
11.2
IS 14494:2019, Cl 26.1 b
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
970 Thickness Of Inner Sheath (ii),IS 10810 (P-6) Cl 1 to
& WIRES mines
11.2
IS 14494:2019, Cl 26.1 b
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
971 Thickness Of Insulation (i),IS 10810 (P-6) Cl 1 to
& WIRES mines
11.2
IS 14494:2019, Cl 26.1 c
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in
972 Torsion (ii),IS 10810 (P-38) Cl 1 to
& WIRES mines
11.3
IS 14494:2019, Cl 26.1
ELECTRICAL- CABLES Elastomer Insulated Flexible Cables for use in Water Absorption by
973 p,IS 10810 (P-28) Cl 1 to
& WIRES mines Electrical Method
11.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Elongation at Break on
974 (f) 1,IS 10810 (P-7) Cl 1 to
& WIRES Connections , Part-1 Elastomeric Insulated Cables Sheath
11.2
IS 4289 (P-1) 1984 2021
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Cl 17.1 (f) 3,IS 10810
975 Oil Resistance on Sheath
& WIRES Connections , Part-1 Elastomeric Insulated Cables (P-31) 1984,IEC 60840
Clause 12.5.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Tensile Strength on
976 (e) 1,IS 10810 (P-7) Cl 1
& WIRES Connections , Part-1 Elastomeric Insulated Cables Insulation
to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 69 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 4289 (P-1) 1984 Cl 17.1

ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Ageing In Air Bomb On
977 (f) 2,IS 10810 (P-56) Cl 1
& WIRES Connections , Part-1 Elastomeric Insulated Cables Sheath
to 11.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
978 Ageing In Oxygen Bomb (e) 3,IS 10810 (P-16) Cl 1
& WIRES Connections , Part-1 Elastomeric Insulated Cables
to 11.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
979 Annealing (b),IS 10810 (P-1) Cl 1 to
& WIRES Connections , Part-1 Elastomeric Insulated Cables
11.2
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
980 Conductor Resistance (c),IS 10810 (P-5) Cl 1 to
& WIRES Connections , Part-1 Elastomeric Insulated Cables
11.2 , Table-1
IS 4289 (P-1) 1984 R Cl
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
981 Flammability 17.1 (k),IS 10810 (P-53)
& WIRES Connections , Part-1 Elastomeric Insulated Cables
Cl 1 to 11.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
982 Flammability (k),IS 10810 (P-53) Cl 1 to
& WIRES Connections , Part-1 Elastomeric Insulated Cables
11.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
983 High Voltage (g) and Cl 18.1, ,IS 10810
& WIRES Connections , Part-1 Elastomeric Insulated Cables
(P-45) Cl 1 to 11.2
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
984 Insulation Resistance (h) ,IS 10810 (P-43) Cl 1
& WIRES Connections , Part-1 Elastomeric Insulated Cables
to 11.2
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
985 Persulphate Test (a),IS 10810 (P-4) Cl 1 ro
& WIRES Connections , Part-1 Elastomeric Insulated Cables
11.3
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible IS 4829(P-1) Cl 18.2
986 Static Flexiblity Test
& WIRES Connections , Part-1 Elastomeric Insulated Cables &17.1 (j)
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible
987 Tear Resistance Test (f) 4, IS 10810 (P-17) Cl 1
& WIRES Connections , Part-1 Elastomeric Insulated Cables
to 11.3
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Tensile Strength on
988 (f) 1,IS 10810 (P-7) Cl 1 to
& WIRES Connections , Part-1 Elastomeric Insulated Cables Sheath
11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 70 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 4289 (P-1) 1984 Cl 17.1

ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Thermal Ageing In Air
989 (e) 2,IS 10810 (P-11) Cl 1
& WIRES Connections , Part-1 Elastomeric Insulated Cables Oven On Insulation
to 11.2
IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Flexible Cable for Lifts and other Flexible Thickness Of Insulation
990 (d) ,IS 10810 (P-6):Cl 1 to
& WIRES Connections , Part-1 Elastomeric Insulated Cables and Sheath (mm)
11.2
Flexible Cable for Lifts and other Flexible IS 4289 (P-1) 1984 Cl 17.1
ELECTRICAL- CABLES Elongation at Break on
991 Connections , Part-1 Elastomeric Insulated Cables (e) 1,IS 10810 (P-7) Cl 1
& WIRES Insulation
a to 11.2
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
992 Connections , Part-2 PVC Insulated Circular Annealing (a) i ,IS 10810 (P-1) Cl 1
& WIRES
Cables to 11.2 2014
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl
ELECTRICAL- CABLES
993 Connections , Part-2 PVC Insulated Circular Cold Bend Test 18.4,IS 10810 (P-20) Cl 1
& WIRES
Cables to 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES Heat Shock Test On
994 Connections , Part-2 PVC Insulated Circular (c) iv,IS 10810 (P-14) Cl 1
& WIRES Insulation and Sheath
Cables to 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
995 Connections , Part-2 PVC Insulated Circular Insulation Resistance (e) ,IS 10810 (P-43) Cl 1
& WIRES
Cables to 11.2
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
996 Connections , Part-2 PVC Insulated Circular Loss Of Mass In Air Oven (c) iii, IS 10810 (P-10) Cl 1
& WIRES
Cables to 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES Shrinkage Test on
997 Connections , Part-2 PVC Insulated Circular (c) v,IS 10810 (P-12) Cl 1
& WIRES insulation and Sheath
Cables to 11.3
Flexible Cable for Lifts and other Flexible Thermal Ageing In Air IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
998 Connections , Part-2 PVC Insulated Circular Oven On Insulation and (c) ii,IS 10810 (P-11) Cl 1
& WIRES
Cables Sheath to 11.2
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl
ELECTRICAL- CABLES
999 Connections , Part-2 PVC Insulated Circular Cold Impact Test 18.4,IS 10810 (P-21) Cl 1
& WIRES
Cables to 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
1000 Connections , Part-2 PVC Insulated Circular Conductor Resistance (a) ii,IS 10810 (P-5) Cl 1
& WIRES
Cables to 11.2 , Table-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 71 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
1001 Connections , Part-2 PVC Insulated Circular Flammability (g),IS 10810 (P-53) Cl 1 to
& WIRES
Cables 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
1002 Connections , Part-2 PVC Insulated Circular Flammability (g),IS 10810 (P-53) Cl 1 to
& WIRES
Cables 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES High Voltage Test (Water
1003 Connections , Part-2 PVC Insulated Circular (d) and 19..2 ,IS 10810
& WIRES Immersion)
Cables (P-45) Cl 1 to 11.2
Flexible Cable for Lifts and other Flexible
ELECTRICAL- CABLES IS 4829 (P-2) Cl 19.3 &
1004 Connections , Part-2 PVC Insulated Circular Static Flexiblity Test
& WIRES 18.1 (f)
Cables
Flexible Cable for Lifts and other Flexible Tensile Strength on IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES
1005 Connections , Part-2 PVC Insulated Circular Insulation and Outer (c) i,IS 10810 (P-7) Cl 1 to
& WIRES
Cables Sheath 11.2
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES Test For Thickness Of
1006 Connections , Part-2 PVC Insulated Circular (b) ,IS 10810 (P-6) Cl 1 to
& WIRES Insulation and Sheath
Cables 11.2
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES Thermal Stability Test on
1007 Connections , Part-2 PVC Insulated Circular (c) vi,IS 10810 (P-60) Cl 1
& WIRES Sheath
Cables to 11.3
Flexible Cable for Lifts and other Flexible IS 4289 (P-2) 1984 Cl 18.1
ELECTRICAL- CABLES Elongation on Insulation
1008 Connections , Part-2 PVC Insulated Circular (c) i,IS 10810 (P-7) Cl 1 to
& WIRES and Sheath
Cables. 11.2
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wire
1009 Adhesion Test a IS 3975 Cl 9.3
& WIRES And Tapes For Armouring Of cables
Galvanising (Mass Of Zinc
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wire Coating (g/m²) on Round IS 3975:1999 Cl 9,IS 6745
1010
& WIRES And Tapes For Armouring Of cables Wire, Formed Wire and Cl 3.1.1 and 3.4
Tapes
IS 3975:1999 Cl 8.4,IS
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wire ResistanceTest (For
1011 10810 (P-42)Cl 1 to 11.2
& WIRES And Tapes For Armouring Of cables Round And Formed Wires)
Table-1
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wire Uniformity Of Zinc IS 3975:1999 Cl 9,IS 2633
1012
& WIRES And Tapes For Armouring Of cables Coating Cl 1 to 5

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 72 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wire IS 3975:1999 Cl 8.3,IS
1013 Wrapping Test
& WIRES And Tapes For Armouring Of cables 1755 Cl 1 to 6 Appendix-A
ELECTRICAL- CABLES Low Carbon Galvanised Steel Wires Formed Wires
1014 Dimensions IS 3975 Cl 7.2
& WIRES and Tapes For armouring Of Cables
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wires Dimensions of Formed
1015 IS 3975 Cl 7.3.1
& WIRES And Tapes For Armouring Of cables Wire
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wires IS 3975 1999 Cl 8.1,IS
1016 Elongation
& WIRES And Tapes For Armouring Of cables 1608 (P-1) Cl 1 to 20
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wires IS 3975 1999 Cl 8.1,IS
1017 Tensile Test
& WIRES And Tapes For Armouring Of cables 1608 Cl 1 to 20
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wires
1018 Thickness of Tapes IS 3975 Cl 7.4.1
& WIRES And Tapes For Armouring Of cables
IS 3975 1999 Cl 8.2,IS
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wires Torsion Test For (Round
1019 1717 C 1 to 8 Annexure-A
& WIRES And Tapes For Armouring Of cables Wire only)
;
ELECTRICAL- CABLES Low carbon Galvanised Steel Wires Formed Wires
1020 Width Of Tape IS 3975 Cl 7.4.2
& WIRES And Tapes For Armouring Of cables
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Tensile Strength on IS 692:1994 Cl 24.1 b,IS
1021
& WIRES Voltage Upto and Including 33 kV Aluminum Conductor 10810 (P-2) Cl 1 to 11.2
Thermal Stability Test on IS 692:1994 Cl 24.1 (k)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1022 Extruded PVC Bedding 7,IS 10810 (P-60) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
And Serving 11.3
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated IS 692:1994 Cl 24.1 (3)
1023 Adhesion Test
& WIRES Voltage Upto and Including 33 kV v,IS 3975 Cl 9
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated IS 692:1994 Cl 24.1 a,IS
1024 Annealing
& WIRES Voltage Upto and Including 33 kV 10810 (P-1) Cl 1 to 11.2
IS 692:1994 Cl 24.1 d,IS
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1025 Conductor Resistance 10810 (P-5) Cl 1 to 11.2
& WIRES Voltage Upto and Including 33 kV
Table-1
IS 692:1994 Cl 24.1 h
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Dimensions of Armour
1026 (1),IS 10810 (P-36) Cl 1 to
& WIRES Voltage Upto and Including 33 kV Material (mm)
11.2
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Dripping Test On Bedding IS 692:1994 Cl 24.4 c,IS
1027
& WIRES Voltage Upto and Including 33 kV And Serving 10810 (P-51) Cl 1 to 10

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 73 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Elongation at Break on IS 692:1994 Cl 24.1 h (2)

ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1028 Armour Wire /Formed ii,IS 10810 (P-37) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
Wire Strip 11.2
IS 692:1994 Cl 24.1 h (3)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Elongation at Break on
1029 ii,IS 10810 (P-37) Cl 1 to
& WIRES Voltage Upto and Including 33 kV Tape
11.2
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated IS 692:1994 Cl 24.4 b ,IS
1030 Flammability
& WIRES Voltage Upto and Including 33 kV 10810 (P-53) Cl 1 to 11.3
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated IS 692:1994 Cl 24.4 b,IS
1031 Flammability
& WIRES Voltage Upto and Including 33 kV 10810 (P-53) Cl 1 to 11.3
Heat Shock Test On IS 692:1994 Cl 24.1 (k)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1032 Extruded PVC Bedding 6,IS 10810 (P-14) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
And Serving 11.3
Hot Deformation Test on IS 692:1994 Cl 24.1 (k)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1033 Extruded PVC Bedding 4,IS 10810 (P-15) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
And serving 11.3
IS 692:1994 Cl 24.1 (k) 2
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1034 Loss Of Mass In Air Oven ,IS 10810 (P-10) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
11.3
IS 692:1994 Cl 24.1 (3)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1035 Mass Of Zinc Coating iv,IS 10810 (P-41) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
11.2
IS 692:1994 Cl 24.1 h (2)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1036 Mass Of Zinc Coating vi,IS 10810 (P-41) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
11.2
IS 692:1994 Cl 24.1 h (2)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1037 Resistivity of Steel Wire vii,IS 10810 (P-42) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
11.2 Table-1
Shrinkage Test on IS 692:1994 Cl 24.1 (k) 3
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1038 Extruded PVC Bedding ,IS 10810 (P-12) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
And Serving 11.3
Tensile Strength on IS 692:1994 Cl 24.1 h (2)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1039 Armour Wire /Formed i,IS 10810 (P-37) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
Wire Strip 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 74 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Tensile Strength on IS 692:1994 Cl 24.1 (k) 1

ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1040 Extruded PVC Bedding ,IS 10810 (P-7) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
and Serving 11.2
IS 692:1994 Cl 24.1 h (3)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1041 Tensile Strength on Tape i,IS 10810 (P-37) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
11.2
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Test For Thickness (mm) IS 692:1994 Cl 24.1 f,IS
1042
& WIRES Voltage Upto and Including 33 kV Lead And lead Alloy Sheet 10810 (P-34) Cl 1 to 11.2
Test For Thickness Of
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated IS 692:1994 Cl 24.1 (j) ,IS
1043 Extruded PVC Bedding
& WIRES Voltage Upto and Including 33 kV 10810 (P-6) Cl 1 to 11.2
and Serving
Thermal Ageing In Air IS 692:1994 Cl 24.1 (k)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated
1044 Oven On Extruded PVC 5,IS 10810 (P-11) Cl 1 to
& WIRES Voltage Upto and Including 33 kV
Bedding And Serving 11.2
IS 692:1994 Cl 24.1 h (2)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Torsion Test For Round
1045 iii,IS 10810 (P-38) Cl 1 to
& WIRES Voltage Upto and Including 33 kV Wires
11.3
IS 692:1994 Cl 24.1 h (2)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Uniformity Of Zinc
1046 v,IS 10810 (P-40) Cl 1 to
& WIRES Voltage Upto and Including 33 kV Coating
11.2
Uniformity Of Zinc
IS 692:1994 Reaffirmed
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Coating on Tape
1047 2020 Cl 24.1 h (3) iii,IS
& WIRES Voltage Upto and Including 33 kV (Applicable only for
10810 (P-40) Cl 1 to 11.2
Galvanised Steel Tape)
IS 692:1994 Cl 24.1 h (2)
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Winding Test For Formed
1048 iv,IS 10810 (P-39) Cl 1 to
& WIRES Voltage Upto and Including 33 kV Wires
11.3
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated IS 692:1994 Cl 24.1 b,IS
1049 Wrapping (Turns))
& WIRES Voltage Upto and Including 33 kV 10810 (P-3) Cl 1 tom 11.2
IS 692:1994 Cl 24.1 (k) 1
ELECTRICAL- CABLES Paper Insulated Lead Sheathed Cables For Rated Elongation on Extruded
1050 ,IS 10810 (P-7) Cl 1 to
& WIRES Voltage Upto and Including 33 kV. PVC Bedding and Serving
11.2 Reaffirmed
Polyvinyl Chloride Insulated Unsheathed And
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Additional Ageing Test
1051 and 10, Table-1 (iii) e 6 &
& WIRES flexible Conductor For Rated Voltages Upto And (Complete Cable)
10.9
including 1100 Volts

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 75 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Polyvinyl Chloride Insulated Unsheathed And

ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1052 Ovality IS 694 Cl 9.1
& WIRES flexible Conductor For Rated Voltages Upto And
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) a
1053 Annealing
& WIRES flexible Conductor For Rated Voltages Upto And (1),IS 10810 (P-1) Cl 1 to
including 1100 Volts 11.2
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Tensile Strength on
1054 and 10, Table-1 (iii) d 1,
& WIRES flexible Conductor For Rated Voltages Upto And Sheath
IS 10810 (P-7) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Cold Bend Test for
1055 and 10, Table-1 (iii) c 8, IS
& WIRES flexible Conductor For Rated Voltages Upto And Insulation
10810 (P-20)Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Cold Impact Test on
1056 and 10, Table-1 (iii) c 9,IS
& WIRES flexible Conductor For Rated Voltages Upto And Insulation
10810 (P-21) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1057 Elongation on Insulation and 10, Table-1 (iii) c 1, IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-7) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1058 Elongation on Sheath and 10, Table-1 (iii) d 1,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-7) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1059 Flammability and 10, Table-1 (iii) e 5, IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-53) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) c
1060 Flammability
& WIRES flexible Conductor For Rated Voltages Upto And 10,IS 10810 (P-53) Cl 1 to
including 1100 Volts 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 76 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Polyvinyl Chloride Insulated Unsheathed Ans

IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1061 Flammability test and 10, Table-1 (iii) e 4,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-53) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Halogen Acid gas and 10, Table-1 (iii) c
1062
& WIRES flexible Conductor For Rated Voltages Upto And Evolution Test 13,IS 10810 (P-59) Cl 1 to
including 1100 Volts 12.3
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Heat Shock Test On
1063 and 10, Table-1 (iii) c 5, IS
& WIRES flexible Conductor For Rated Voltages Upto And Insulation
10810 (P-14) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Heat Shock Test On
1064 and 10, Table-1 (iii) d 5,IS
& WIRES flexible Conductor For Rated Voltages Upto And Sheath
10810 (P-14)Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And High Voltage (Water
1065 and 10, Table-1 (iii) e 1,IS
& WIRES flexible Conductor For Rated Voltages Upto And Immersion Test)
10810 (P-45) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1066 High Voltage Test and 10, Table-1 (iii) e 3,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-45) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Hot Deformation Test on
1067 and 10, Table-1 (iii) c 6,IS
& WIRES flexible Conductor For Rated Voltages Upto And insulation
10810 (P-15) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1068 Insulation Resistance and 10, Table-1 (iii) e 2,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-43) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Loss Of Mass In Air Oven
1069 and 10, Table-1 (iii) d 2,IS
& WIRES flexible Conductor For Rated Voltages Upto And on Sheath
10810 (P-10) Cl 1 to 11.3
including 1100 Volts

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 77 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,

ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) c
1070 Oxygen Index Test
& WIRES flexible Conductor For Rated Voltages Upto And 11,IS 10810 (P-58) Cl 1 to
including 1100 Volts 11
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1071 Oxygen Index Test and 10, Table-1 (iii) d 8,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-58) Cl 1 to 11
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) a
1072 Persulphate Test
& WIRES flexible Conductor For Rated Voltages Upto And (5),IS 10810 (P-4) Cl 1 ro
including 1100 Volts 11.3
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Shrinkage Test on
1073 and 10, Table-1 (iii) c 4,IS
& WIRES flexible Conductor For Rated Voltages Upto And insulation
10810 (P-12) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1074 Shrinkage Test on Sheath and 10, Table-1 (iii) d 4,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-12) Cl 1 to 11.3
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1075 Temperature index and 10, Table-1 (iii) d 9,IS
& WIRES flexible Conductor For Rated Voltages Upto And
10810 (P-64) Cl 1 to 10.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) c
1076 Temperature index
& WIRES flexible Conductor For Rated Voltages Upto And 12,IS 10810 (P-64) Cl 1 to
including 1100 Volts 10.2
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Thermal Ageing In Air
1077 and 10, Table-1 (iii) c 3,IS
& WIRES flexible Conductor For Rated Voltages Upto And Oven On Insulation
10810 (P-11) Cl 1 to 11.2
including 1100 Volts
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Thermal Ageing In Air
1078 and 10, Table-1 (iii) d 3,IS
& WIRES flexible Conductor For Rated Voltages Upto And Oven On Sheath
10810 (P-11) Cl 1 to 11.2
including 1100 Volts

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 78 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,

ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) a
1079 Wrapping
& WIRES flexible Conductor For Rated Voltages Upto And (3),IS 10810 (P-3) Cl 1
including 1100 Volts tom 11.2
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) d
1080 Cold Bend Test for Sheath
& WIRES flexible Conductor For Rated Voltages Upto And 12,IS 10810 (P-20) Cl 1 to
including 1100 Volts. 11.3
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) a (4),
1081 Conductor Resistance
& WIRES flexible Conductor For Rated Voltages Upto And IS 10810 (P-5) Cl 1 to 11.2
including 1100 Volts. Table-1
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Halogen Acid gas and 10, Table-1 (iii) d
1082
& WIRES flexible Conductor For Rated Voltages Upto And Evolution Test 10,IS 10810 (P-59) Cl 1 to
including 1100 Volts. 12.3
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Cold Impact Test on and 10, Table-1 (iii) d
1083
& WIRES flexible Conductor For Rated Voltages Upto And Sheath 13,IS 10810 (P-21) Cl 1 to
including 1100 Volts. 11.3
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1084 Density Of Smoke and 10, Table-1 (iii) c
& WIRES flexible Conductor For Rated Voltages Upto And
14,IS 13360 (P-6/Sec-9)
including 1100 Volts.
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And
1085 Density Of Smoke and 10, Table-1 (iii) d
& WIRES flexible Conductor For Rated Voltages Upto And
11,IS 13360 (P-6/Sec-9)
including 1100 Volts.
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And and 10, Table-1 (iii) c
1086 Flammability
& WIRES flexible Conductor For Rated Voltages Upto And 10,IS 10810 (P-53) Cl 1 to
including 1100 Volts. 11.3
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Hot Deformation Test on
1087 and 10, Table-1 (iii) d 6,IS
& WIRES flexible Conductor For Rated Voltages Upto And Sheath
10810 (P-15) Cl 1 to 11.3
including 1100 Volts.

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 79 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Polyvinyl Chloride Insulated Unsheathed Ans

IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Loss Of Mass In Air Oven
1088 and 10, Table-1 (iii) c 2,IS
& WIRES flexible Conductor For Rated Voltages Upto And on Insulation
10810 (P-10) Cl 1 to 11.3
including 1100 Volts.
Polyvinyl Chloride Insulated Unsheathed Ans IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Tensile Strength on and 10, Table-1 (iii) a
1089
& WIRES flexible Conductor For Rated Voltages Upto And Aluminum Conductor (2),IS 10810 (P-2) Cl 1 to
including 1100 Volts. 11.2
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Tensile Strength on
1090 and 10, Table-1 (iii) c 1, IS
& WIRES flexible Conductor For Rated Voltages Upto And Insulation
10810 (P-7) Cl 1 to 11.2
including 1100 Volts.
Polyvinyl Chloride Insulated Unsheathed Ans Test For Overall
IS 694:2010, Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Dimensions and
1091 and 10, Table-1 (iii) b ,IS
& WIRES flexible Conductor For Rated Voltages Upto And Thickness Of Insulation
10810 (P-6) Cl 1 to 11.2
including 1100 Volts. and Sheath
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Thermal Stability Test on
1092 and 10, Table-1 (iii) c 7,IS
& WIRES flexible Conductor For Rated Voltages Upto And Insulation
10810 (P-60)Cl 1 to 11.3
including 1100 Volts.
Polyvinyl Chloride Insulated Unsheathed Ans
IS 694:2010 Cl 1.1, 4.2,
ELECTRICAL- CABLES Sheathed Cables Ans Cords Wirh Rigid And Thermal Stability Test on
1093 and 10, Table-1 (iii) d 7,IS
& WIRES flexible Conductor For Rated Voltages Upto And Sheath
10810 (P-60) Cl 1 to 11.3
including 1100 Volts.
Power Cables With Extruded Insulation And Their
Accessories For Rated Voltage From 1 kV
ELECTRICAL- CABLES Resistivity Of Semi IEC 60502 (P-2) ,Cl
1094 (Um=1.2 kV) Upto 30 kV (Um=36 kV) Part-2
& WIRES Conducting Screen 18.2.10 Annexure-D
Cables For Rated Voltage From 6 kV ( Um 7.2 kV)
Upto 30 kV ( Um =36 kV)
Power cables with extruded insulation and their
Test for determining the
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES mechnical properties of IEC 60502-2 :2014 cl 19.5
1095 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES insulation before & after &IEC 60811-501 Cl 4.2.6
for rated voltages from 6 kV (Um = 7,2 kV) up to
ageing (Elongation )
30 kV (Um = 36 kV)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 80 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Power cables with extruded insulation and their Test on PVC insulation &
accessories for rated voltages from 1 kV (Um = sheath at low
ELECTRICAL- CABLES IEC 60502-2:2014,Cl
1096 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables temperature ( Bending
& WIRES 19.10 IEC 60811-504 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to tests) at low temperature
30 kV (Um = 36 kV) for insulation and sheaths
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = Additional ageing test on IEC 60502-2:2014 Cl 19.7,
ELECTRICAL- CABLES
1097 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables piece of complete cable , IEC 60811-401 :2012 Cl 4
& WIRES
for rated voltages from 6 kV (Um = 7,2 kV) up to Elongation Amendment-1
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
Conditioning and
accessories for rated voltages from 1 kV (Um = IEC 60502-2:2014 Cl
ELECTRICAL- CABLES mechnical test Tensile
1098 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables 19.6.3, & 9.5.3,IEC
& WIRES Strength Ageing In Air
for rated voltages from 6 kV (Um = 7,2 kV) up to 60811-401 Cl 4
Oven
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = Determination of
ELECTRICAL- CABLES IEC 60502-2 Cl 19.20 &
1099 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables hardness of HEPR
& WIRES Annex E
for rated voltages from 6 kV (Um = 7,2 kV) up to Insulation
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Measurment of thickness IEC 60502-2:2014 Cl 19.4
1100 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES of Lead sheath , 17.6.2 & 17.6.3
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Thermal Stability test for IEC 60502-2:2014 Cl
1101 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES PVC Insulation & Sheaths 19.19 ,IEC 60811-405 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV)
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um =
ELECTRICAL- CABLES Measurment Of armour IEC 60502-2: Cl 17.7.1 &
1102 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables
& WIRES wires & tape . 17.7.2 :2014
for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV),

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 81 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Power cables with extruded insulation and their

accessories for rated voltages from 1 kV (Um = Measurment of Carbon
ELECTRICAL- CABLES IEC 60502-2:2014 Cl
1103 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables Black Content of black PE
& WIRES 19.16,IEC 60811-605 Cl 4
for rated voltages from 6 kV (Um = 7,2 kV) up to Over sheath
30 kV (Um = 36 kV),
Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = IEC 60502-2:2014 Cl
ELECTRICAL- CABLES Measurment of thickness
1104 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables 19.2.1, IEC 60811-201 Cl
& WIRES of insulation
for rated voltages from 6 kV (Um = 7,2 kV) up to 4. Amendment -14
30 kV (Um = 36 kV),
Power cables with extruded insulation and their Test on PVC insulation
accessories for rated voltages from 1 kV (Um = and sheath at low IEC 60502-2:2014 Cl
ELECTRICAL- CABLES
1105 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables temperature ( Impact 19.10, IEC 60811-506 Cl 4
& WIRES
for rated voltages from 6 kV (Um = 7,2 kV) up to Test ) at low temperature :2012
30 kV (Um = 36 kV), for insulation and sheaths
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Measurement Of IEC 60502-1 :2021 Cl
1106 Accessories For Rated Voltages From 1 kV Upto
& WIRES Thickness Of Insulation 18.2,IEC 60811-201 Cl 4
30 kV
Power Cables With Extruded Insulation And their IEC 60502-1 :2021 Cl
ELECTRICAL- CABLES
1107 Accessories For Rated Voltages From 1 kV Upto Acid Gas Emission Test 18.15.4,IEC 60754-1 Cl 1
& WIRES
30 kV to 10
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Additional Ageing Test On IEC 60502-1:2021 Cl
1108 Accessories For Rated Voltages From 1 kV Upto
& WIRES Piece Of Complete Cables 18.6,IEC 60811-401 Cl 4
30 kV
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES IEC 60502-1 :2021 Cl
1109 Accessories For Rated Voltages From 1 kV Upto Ageing Treatment
& WIRES 18.5.2,IEC 60811-401 Cl 4
30 kV
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES IEC 60502-1:2021 Cl
1110 Accessories For Rated Voltages From 1 kV Upto Ageing Treatment
& WIRES 18.4.2,IEC 60811-401 Cl 4
30 kV
Power Cables With Extruded Insulation And their Bending Tests At Low
ELECTRICAL- CABLES IEC 60502-1 :2021 Cl
1111 Accessories For Rated Voltages From 1 kV Upto Temperature for
& WIRES 18.8,IEC 60811-504 Cl 4
30 kV Insulation and Sheaths.
Power Cables With Extruded Insulation And their IEC 60502-1 :2021 Cl
ELECTRICAL- CABLES Elongation Before Ageing
1112 Accessories For Rated Voltages From 1 kV Upto 18.4,IEC 60811-501 Cl
& WIRES Treatment
30 kV 4.2.6 Amendment-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 82 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Power Cables With Extruded Insulation And their

ELECTRICAL- CABLES Elongation Before Ageing IEC 60502-1 :2021 Cl 18.5
1113 Accessories For Rated Voltages From 1 kV Upto
& WIRES Treatment ,IEC 60811-501 Cl 4.2.6
30 kV
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Fire Tests- Flame Spread IEC 60502-1:2021 Cl
1114 Accessories For Rated Voltages From 1 kV Upto
& WIRES Test On Single Cable 18.15,IEC 60332-1-2 Cl 4
30 kV
Power Cables With Extruded Insulation And their IEC 60502-1: 2021 Cl
ELECTRICAL- CABLES Flame Spread Test For
1115 Accessories For Rated Voltages From 1 kV Upto 18.15.2,IEC 60332-3-24 Cl
& WIRES Bunched Cables
30 kV 5
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Hardness Shore-A Of IEC 60502-1 Cl 18.19.1
1116 Accessories For Rated Voltages From 1 kV Upto
& WIRES HEPR Annexure-C &
30 kV
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES IEC 60502-1 2021 Cl
1117 Accessories For Rated Voltages From 1 kV Upto Heat Shock Test
& WIRES 18.8,IEC 60811-509 Cl 4
30 kV
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES
1118 Accessories For Rated Voltages From 1 kV Upto High Voltage Test IEC 60502-1 Cl 17.4.1
& WIRES
30 kV
Power Cables With Extruded Insulation And their Hot Set Test (On Load
ELECTRICAL- CABLES IEC 60502-1 :2021 Cl
1119 Accessories For Rated Voltages From 1 kV Upto test) for Cross-Linked
& WIRES 18.12,IEC 60811-507 Cl 4
30 kV Materials
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Hot Set Test for Cross- IEC 60502-1 :2021 Cl
1120 Accessories For Rated Voltages From 1 kV Upto
& WIRES Linked Materials 18.12,IEC 60811-507 Cl 4
30 kV
Power Cables With Extruded Insulation And their Impact Test at Low
ELECTRICAL- CABLES IEC 60502-1 :2021 Cl
1121 Accessories For Rated Voltages From 1 kV Upto Temperature for
& WIRES 18.9,IEC 60811-506 Cl 4
30 kV Insulations and Sheaths
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Loss Of Mass On PVC IEC 60502-1 :2021 Cl
1122 Accessories For Rated Voltages From 1 kV Upto
& WIRES Sheet 18.7,IEC 60811-409: Cl 4
30 kV
Measurement Of Carbon
Power Cables With Extruded Insulation And their Black Content Of Black PE
ELECTRICAL- CABLES IEC 60502-1:2021, Cl
1123 Accessories For Rated Voltages From 1 kV Upto Oversheaths and/or
& WIRES 18.16.,IEC 60811-605 Cl 4
30 kV Mineral Filler in
Polyethylene Compounds

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 83 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Power Cables With Extruded Insulation And their Measurement Of

ELECTRICAL- CABLES IEC 60502-1 :2021 Cl
1124 Accessories For Rated Voltages From 1 kV Upto Thickness Of Non Metallic
& WIRES 18.3,IEC 60811-202 Cl 4.4
30 kV Sheaths
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Oil Emmersion Test For IEC 60502-1:2021 Cl
1125 Accessories For Rated Voltages From 1 kV Upto
& WIRES Elastomer Sheath 18.13,IEC 60811-404 Cl 4
30 kV
Power Cables With Extruded Insulation And their Pressure Test at High
ELECTRICAL- CABLES IEC 60502-1 :2021 Cl
1126 Accessories For Rated Voltages From 1 kV Upto Temperature for
& WIRES 18.8,IEC 60811-508 Cl 4
30 kV Insulation and Sheaths
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Shrinkage Test for IEC 60502-1:2021 Cl
1127 Accessories For Rated Voltages From 1 kV Upto
& WIRES Insulations 18.17,IEC 60811-502 Cl 4
30 kV
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Shrinkage Test for IEC 60502-1:2021 Cl
1128 Accessories For Rated Voltages From 1 kV Upto
& WIRES Sheaths 18.2.1,IEC 60811-503 Cl 4
30 kV
Power Cables With Extruded Insulation And their IEC 60502-1:2021 Cl
ELECTRICAL- CABLES
1129 Accessories For Rated Voltages From 1 kV Upto Smoke Emission Test 18.15.3,IEC 61034-2, Cl 1
& WIRES
30 kV to 9
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Tensile Strength Before IEC 60502-1 :2021 Cl
1130 Accessories For Rated Voltages From 1 kV Upto
& WIRES Ageing Treatment 18.5,IEC 60811-501 Cl 4
30 kV
Test For Determining
Mechanical Properties Of
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Insulation Before And IEC 60502-1 :2021 Cl
1131 Accessories For Rated Voltages From 1 kV Upto
& WIRES After Ageing, Tensile 18.4,IEC 60811 -501
30 kV
Strenth Before Ageing
Treatment
Power Cables With Extruded Insulation And their Water Absorption Test For IEC 60502-1 :2021, Cl
ELECTRICAL- CABLES
1132 Accessories For Rated Voltages From 1 kV Upto Hallogen Free 18.22.2,IEC 60811-402 Cl
& WIRES
30 kV Oversheaths 4
Power Cables With Extruded Insulation And their
ELECTRICAL- CABLES Water Absorption Tests IEC 60502-1 :2021, Cl
1133 Accessories For Rated Voltages From 1 kV Upto
& WIRES (Gravimetric) 18.14,IEC 60811-402 Cl 4
30 kV
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1134 (Part-1) For Working Voltage Upto and Including Conductor Resistance (a) 4,IS 10810 (P-5) Cl 1
& WIRES
1100 Volt to 11.2 Table-1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 84 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 1554 (P-1) 1988 Cl

PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES 16.11,IS 13360
1135 (Part-1) For Working Voltage Upto and Including Density Of Smoke
& WIRES (P-6/Sec-9) Cl 1 to 10
1100 Volt
Table-1 & 2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Dimensions of Armour
1136 (Part-1) For Working Voltage Upto and Including (b) 1 & 13.3,IS 10810
& WIRES Material
1100 Volt (P-36) Cl 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES Flame Retardance Test
1137 (Part-1) For Working Voltage Upto and Including 16.6,IS 10810 (P-61) Cl 1
& WIRES On Single Cable
1100 Volt to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1)988 Cl 15.1
ELECTRICAL- CABLES
1138 (Part-1) For Working Voltage Upto and Including Flammability h,IS 10810 (P-53) Cl 1 to
& WIRES
1100 Volt 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES Halogen Acid gas
1139 (Part-1) For Working Voltage Upto and Including 16.9,IS 10810 (P-59) Cl 1
& WIRES Evolution Test
1100 Volt to 12.3
PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES High Voltage (Water IS 1554 (P-1) 1988 Cl 15.1
1140 (Part-1) For Working Voltage Upto and Including
& WIRES Immersion Test) f,& Cl 16.3
1100 Volt
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Thermal Stability Test on
1141 (Part-1) For Working Voltage Upto and Including d (7),IS 10810 (P-60) Cl 1
& WIRES Sheath
1100 Volt to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1142 (Part-1) For Working Voltage Upto and Including Annealing (a) 1,IS 10810 (P-1) Cl 1
& WIRES
1100 Volt to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES Armour Coverage
1143 (Part-1) For Working Voltage Upto and Including 13.1.2, & Cl 13.1.2,
& WIRES Percentage
1100 Volt Appendix-C
PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES Cold Bend Test for Outer IS 1554 (P-1) Cl 15.4 a,IS
1144 (Part-1) For Working Voltage Upto and Including
& WIRES Sheath 10810 (P-20) Cl 1 to 11.3
1100 Volt
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.4
ELECTRICAL- CABLES
1145 (Part-1) For Working Voltage Upto and Including Cold Impact Test b,IS 10810 (P-21) Cl 1 to
& WIRES
1100 Volt 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 85 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 1554 (P-1) 1988 Cl

PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES 16.11,ASTM-D 2843 Cl 1
1146 (Part-1) For Working Voltage Upto and Including Density Of Smoke
& WIRES to 16 Table-1 & 2
1100 Volt
Appendix
PVC Insulated (Heavy Duty) Electric Cables Elongation at Break on IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1147 (Part-1) For Working Voltage Upto and Including Armour Wire /Formed (b) 2 (ii) & 13.6 ( b),IS
& WIRES
1100 Volt Wire Strip 10810 (P-37) Cl 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Elongation on Insulation
1148 (Part-1) For Working Voltage Upto and Including d (1) ,IS 10810 (P-7) Cl 1
& WIRES and Sheath
1100 Volt to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES Flame Retardance Test
1149 (Part-1) For Working Voltage Upto and Including 16.7,IS 10810 (P-62) Cl 1
& WIRES On Bunched Cables
1100 Volt to 12.1, Annexure-A (6.1)
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1150 (Part-1) For Working Voltage Upto and Including Flammability h,IS 10810 (P-53) Cl 1 to
& WIRES
1100 Volt 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Heat Shock Test On
1151 (Part-1) For Working Voltage Upto and Including d (6),IS 10810 (P-14)Cl 1
& WIRES Sheath
1100 Volt to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1152 (Part-1) For Working Voltage Upto and Including High Voltage Test g,IS 10810 (P-45) Cl 1 to
& WIRES
1100 Volt 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Hot Deformation Test on
1153 (Part-1) For Working Voltage Upto and Including d (4),IS 10810
& WIRES insulation and Sheath
1100 Volt (P-15):1984 Cl 1 to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1154 (Part-1) For Working Voltage Upto and Including Insulation Resistance e,IS 10810 (P-43) Cl 1 to
& WIRES
1100 Volt 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Insulation Resistance (
1155 (Part-1) For Working Voltage Upto and Including e,IS 10810 (P-43) Cl 1 to
& WIRES Volume Resistivity)
1100 Volt 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1156 (Part-1) For Working Voltage Upto and Including Loss Of Mass In Air Oven d (5),IS 10810 (P-10) Cl 1
& WIRES
1100 Volt to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 86 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 1554 (P-1) 1988 Cl 15.1

PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES (b) 2 (vi) & 13.6 ( f),IS
1157 (Part-1) For Working Voltage Upto and Including Mass Of Zinc Coating
& WIRES 10810 (P-41) Cl 1 to 11.2
1100 Volt
Reaffirmed
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES
1158 (Part-1) For Working Voltage Upto and Including Oxygen Index Test 16.5,IS 10810 (P-58) Cl 1
& WIRES
1100 Volt to 11
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.4
ELECTRICAL- CABLES Resistance Test For
1159 (Part-1) For Working Voltage Upto and Including c,IS 10810 (P-42) Cl 1 to
& WIRES Armour
1100 Volt 11.2 Table-1
IS 1554 (P-1) 1988 Cl 15.1
PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES (b) 2 (vi)i & 13.6 ( g),IS
1160 (Part-1) For Working Voltage Upto and Including Resistivity of Steel Wire
& WIRES 10810 (P-42) Cl 1 to 11.2
1100 Volt
Table-1
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Shrinkage Test on
1161 (Part-1) For Working Voltage Upto and Including d (3),IS 10810 (P-12) Cl 1
& WIRES insulation and Sheath
1100 Volt to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES
1162 (Part-1) For Working Voltage Upto and Including Smoke Density 16.11,IS 10810 (P- 63) Cl
& WIRES
1100 Volt 1 to 11.2 Annexure-A
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl
ELECTRICAL- CABLES
1163 (Part-1) For Working Voltage Upto and Including Temperature index 16.10,IS 10810 (P-64) Cl 1
& WIRES
1100 Volt to 10.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Tensile Strength on
1164 (Part-1) For Working Voltage Upto and Including (a) 2,IS 10810 (P-2) Cl 1
& WIRES Aluminum Conductor
1100 Volt to 11.2
PVC Insulated (Heavy Duty) Electric Cables Tensile Strength on IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1165 (Part-1) For Working Voltage Upto and Including Armour Wire /Formed (b) 2 (i) & 13.6 ( a) ,IS
& WIRES
1100 Volt Wire Strip 10810 (P-37) Cl 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables Tensile Strength on IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1166 (Part-1) For Working Voltage Upto and Including Insulation and Outer d (1),IS 10810 (P-7) Cl 1
& WIRES
1100 Volt Sheath to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Test For Thickness Of
1167 (Part-1) For Working Voltage Upto and Including c,IS 10810 (P-6) Cl 1 to
& WIRES Insulation and Sheath
1100 Volt 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 87 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

PVC Insulated (Heavy Duty) Electric Cables Thermal Ageing In Air IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1168 (Part-1) For Working Voltage Upto and Including Oven On Insulation and d (2),IS 10810 (P-11) Cl 1
& WIRES
1100 Volt Sheath to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Torsion Test For Round
1169 (Part-1) For Working Voltage Upto and Including (b) 2 (iii) & 13.6 ( c),IS
& WIRES Wires
1100 Volt 10810 (P-38) Cl 1 to 11.3
IS 1554 (P-1) 1988 ,ASTM
PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES Ultravoilet Test (UV) G 154:Cl 1 to 12
1170 (Part-1) For Working Voltage Upto and Including
& WIRES Complete, Elongation Annexure and Appendix,
1100 Volt
Table-1, 2, X 2.1, X 3.2
IS 1554 (P-1) 1988 , ASTM
PVC Insulated (Heavy Duty) Electric Cables Ultravoilet Test (UV)
ELECTRICAL- CABLES G 154: Cl 1 to 12
1171 (Part-1) For Working Voltage Upto and Including Complete, Tensile
& WIRES Annexure and Appendix,
1100 Volt Strength
Table-1, 2, X 2.1, X 3.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Uniformity Of Zinc
1172 (Part-1) For Working Voltage Upto and Including (b) 2 (v) & 13.6 ( e),IS
& WIRES Coating
1100 Volt 10810 (P-40) Cl 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES Winding Test For Formed
1173 (Part-1) For Working Voltage Upto and Including (b) 2 (iv) & 13.6 ( d),IS
& WIRES Wires
1100 Volt 10810 (P-39) Cl 1 to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-1) 1988 Cl 15.1
ELECTRICAL- CABLES
1174 (Part-1) For Working Voltage Upto and Including Wrapping (Turns) (a) 3,IS 10810 (P-3) Cl 1
& WIRES
1100 Volt tom 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988,Cl 18.1
ELECTRICAL- CABLES
1175 (Part-2) For Working Voltages From 3.3 kV Upto Annealing a (1) IS 10810 (P-1) Cl 1
& WIRES
and Including 11 kV to 11.2
PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES Armour Coverage IS 1554 (P-2) Cl 16.1.2
1176 (Part-2) For Working Voltages from 3.3 kV Upto
& WIRES Percentage Appendic -C
and Including 11 kV
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1177 (Part-2) For Working Voltages from 3.3 kV Upto Conductor Resistance a (4),IS 10810 (P-5) : Cl 1
& WIRES
and Including 11 kV to 11.2 Table-1
PVC Insulated (Heavy Duty) Electric Cables Dimensions of Round IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1178 (Part-2) For Working Voltages from 3.3 kV Upto Steel Wire/Formed Steel b (1),IS 10810 (P-36) Cl 1
& WIRES
and Including 11 kV Wire (Strip) Armour to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 88 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Elongation on Insulation
1179 (Part-2) For Working Voltages from 3.3 kV Upto d (1),IS 10810 (P-7) Cl 1
& WIRES and Sheath
and Including 11 kV to 11.2
PVC Insulated (Heavy Duty) Electric Cables Elongation at Break on IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1180 (Part-2) For Working Voltages from 3.3 kV Upto Armour Wire /Formed b (2) ii,IS 10810 (P-37) Cl
& WIRES
and Including 11 kV Wire Strip 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1181 (Part-2) For Working Voltages from 3.3 kV Upto Flammability n,IS 10810 (P-53) Cl 1 to
& WIRES
and Including 11 kV 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1182 (Part-2) For Working Voltages from 3.3 kV Upto Flammability n,IS 10810 (P-53) Cl 1 to
& WIRES
and Including 11 kV 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Heat Shock Test On
1183 (Part-2) For Working Voltages from 3.3 kV Upto d (6),IS 10810 (P-14) Cl 1
& WIRES Sheath
and Including 11 kV to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Hot Deformation Test on
1184 (Part-2) For Working Voltages from 3.3 kV Upto d (4),IS 10810 (P-15) Cl 1
& WIRES insulation and Sheath
and Including 11 kV to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1185 (Part-2) For Working Voltages from 3.3 kV Upto Insulation Resistance e ,IS 10810 (P-43) Cl 1 to
& WIRES
and Including 11 kV 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Insulation Resistance (
1186 (Part-2) For Working Voltages from 3.3 kV Upto e,IS 10810 (P-43) Cl 1 to
& WIRES Volume Resistivity)
and Including 11 kV 11.2
PVC Insulated (Heavy Duty) Electric Cables IS1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1187 (Part-2) For Working Voltages from 3.3 kV Upto Loss Of Mass In Air Oven d ( 5) ,IS 10810 (P-10) Cl
& WIRES
and Including 11 kV 1 to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1188 (Part-2) For Working Voltages from 3.3 kV Upto Mass Of Zinc Coating b 2 (vi),IS 10810 (P-41) Cl
& WIRES
and Including 11 kV 1 to 11.2 Reaffirmed
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1189 (Part-2) For Working Voltages from 3.3 kV Upto Resistivity of Steel Wire b 2 (vii),IS 10810 (P-42)Cl
& WIRES
and Including 11 kV 1 to 11.2 Table-1
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Shrinkage Test on
1190 (Part-2) For Working Voltages from 3.3 kV Upto d (3),IS 10810 (P-12) Cl 1
& WIRES insulation and Sheath
and Including 11 kV to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 89 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988,Cl 18.1
ELECTRICAL- CABLES Tensile Strength on
1191 (Part-2) For Working Voltages From 3.3 kV Upto a (2) &IS 10810 (P-2)Cl 1
& WIRES Aluminum Conductor
and Including 11 kV to 11.2
PVC Insulated (Heavy Duty) Electric Cables Tensile Strength on IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1192 (Part-2) For Working Voltages from 3.3 kV Upto Armour Wire /Formed b (2) i,IS 10810 (P-37) Cl
& WIRES
and Including 11 kV Wire Strip 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables Tensile Strength on IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1193 (Part-2) For Working Voltages from 3.3 kV Upto Insulation and Outer d (1),IS 10810 (P-7) Cl 1
& WIRES
and Including 11 kV Sheath to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Test For Thickness Of
1194 (Part-2) For Working Voltages from 3.3 kV Upto c , IS 10810 (P-6) Cl 1 to
& WIRES Insulation and Sheath
and Including 11 kV 11.2
PVC Insulated (Heavy Duty) Electric Cables Thermal Ageing In Air IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1195 (Part-2) For Working Voltages from 3.3 kV Upto Oven On Insulation and d (2),IS 10810 (P-11) Cl 1
& WIRES
and Including 11 kV Sheath to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Thermal Stability Test on
1196 (Part-2) For Working Voltages from 3.3 kV Upto d (7),IS 10810 (P-60)
& WIRES Sheath
and Including 11 kV 1984 Cl 1 to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Torsion Test For Round
1197 (Part-2) For Working Voltages from 3.3 kV Upto b 2 (iii),IS 10810 (P-38) Cl
& WIRES Wires
and Including 11 kV 1 to 11.3
IS 1554 (P-2) 1988 ,ASTM
PVC Insulated (Heavy Duty) Electric Cables
ELECTRICAL- CABLES Ultravoilet Test (UV) G 154: Cl 1 to 12
1198 (Part-2) For Working Voltages from 3.3 kV Upto
& WIRES Complete, Elongation Annexure and Appendix,
and Including 11 kV
Table-1, 2, X 2.1, X 3.2
IS 1554 (P-2) 1988,ASTM
PVC Insulated (Heavy Duty) Electric Cables Ultravoilet Test (UV)
ELECTRICAL- CABLES G 154:Cl 1 to 12
1199 (Part-2) For Working Voltages from 3.3 kV Upto Complete, Tensile
& WIRES Annexure and Appendix,
and Including 11 kV Strength
Table-1, 2, X 2.1, X 3.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Uniformity Of Zinc
1200 (Part-2) For Working Voltages from 3.3 kV Upto b 2 (v),IS 10810 (P-40) Cl
& WIRES Coating
and Including 11 kV 1 to 11.2
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Water Absorption by
1201 (Part-2) For Working Voltages from 3.3 kV Upto d (8),IS 10810 (P-33) Cl 1
& WIRES Gravimetric Method
and Including 11 kV to 11.2

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 90 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES Winding Test For Formed
1202 (Part-2) For Working Voltages from 3.3 kV Upto b 2 (iv),IS 10810 (P-39) Cl
& WIRES Wires
and Including 11 kV 1 to 11.3
PVC Insulated (Heavy Duty) Electric Cables IS 1554 (P-2) 1988 Cl 18.1
ELECTRICAL- CABLES
1203 (Part-2) For Working Voltages from 3.3 kV Upto Wrapping a (3),IS 10810 (P-3) Cl 1
& WIRES
and Including 11 kV tom 11.2
IS 9857:1990 Cl 10.1 (a)
ELECTRICAL- CABLES
1204 Welding Cables Annealing 1,IS 10810 (P-1) Cl 1 to
& WIRES
11.2
IS 9857:1990 Cl 10.1 (a)
ELECTRICAL- CABLES
1205 Welding Cables Conductor Resistance 2,IS 10810 (P-5) Cl 1 to
& WIRES
11.2 , Table-1
) IS 9857:1990 Cl 10.1 (c)
ELECTRICAL- CABLES Elongation at Break on
1206 Welding Cables 1, IS 10810 (P-7) Cl 1 to
& WIRES Covering
11.2
Elongation: on Covering IS 9857:1990 Cl 10.1 (c)
ELECTRICAL- CABLES
1207 Welding Cables Accelrated Ageing Test by 3,IS 10810 (P-56) Cl 1 to
& WIRES
air pressure method 11.3
IS 9857:1990 Cl 10.1 (f),
ELECTRICAL- CABLES
1208 Welding Cables Flammability IS 10810 (P-53) Cl 1 to
& WIRES
11.3
ELECTRICAL- CABLES IS 9857:1990 Cl 10.1 (f),IS
1209 Welding Cables Flammability
& WIRES 10810 (P-53) Cl 1 to 11.3
IS 9857:1990 Cl 10.1 (d)
ELECTRICAL- CABLES
1210 Welding Cables High Voltage ,IS 10810 (P-45) Cl 1 to
& WIRES
11.2
IS 9857:1990 Cl 10.1 (c)
ELECTRICAL- CABLES
1211 Welding Cables Hot Set on load 5,IS 10810 (P-30)Cl 1 to
& WIRES
11.2
IS 9857:1990 Cl 10.1 (c)
ELECTRICAL- CABLES Oil Resistance on
1212 Welding Cables 4, IS 10810 (P-31) Cl 1 to
& WIRES Covering
11.2
IS 9857:1990 Cl 10.1 (e),
ELECTRICAL- CABLES
1213 Welding Cables Static Flexibility IS 10810 (P-54) Cl 1 to
& WIRES
11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 91 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 9857:1990 Cl 10.1 (c) 1

ELECTRICAL- CABLES Tensile Strength on
1214 Welding Cables ,IS 10810 (P-7) Cl 1 to
& WIRES Covering
11.2
IS 9857:1990 Cl 10.1 (c)
ELECTRICAL- CABLES Thermal Ageing In Air
1215 Welding Cables 2,IS 10810 (P-11) 1984 Cl
& WIRES Oven On Covering
1 to 11.2
IS 9857:1990 Cl 10.(b)
ELECTRICAL- CABLES
1216 Welding Cables Thickness Of Covering Table-1,IS 10810 (P-6):Cl
& WIRES
1 to 11.2
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for High Voltage (Water IS 8783 (P-4/Sec-1) 1995
1217
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Immersion Test) Cl 4.6
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for
1218 High Voltage Test Cl 4.6,IS 10810 (P-45) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire
to 11.2
IS 8783 (P-4/ sec-1) Cl 4.4
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for
1219 Overall Dimensions Table-1 and 2,4.1 and 4.3
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire
Annexure-A
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for
1220 Annealing test Cl 3.1,IS 10810 (P-1) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire
to 11.2
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for
1221 Conductor Resistance Cl 3.1,IS 10810 (P-5) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire
to 11.2 Table-1
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for 8783 (P-3) Cl 4.1 (i) ,
1222 Dimensions
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Annexure-A
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for
1223 Elongation on Insulation Cl 3.2 ,IS 10810 (P-7) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire
to 11.2
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Heat Shock Test On
1224 Cl 3.2,IS 10810 (P-14) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Insulation
to 11.3
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Hot Deformation Test on
1225 Cl 3.2,IS 10810 (P-15) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire insulation
to 11.3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 92 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

IS 8783 (P-4/ sec-1) 1995

ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Shrinkage Test on
1226 Cl 3.2,IS 10810 (P-12) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire insulation
to 11.3
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Tensile Strength on
1227 Cl 3.2,IS 10810 (P-7) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Insulation
to 11.2
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Test For Thickness Of
1228 Cl 4.1,IS 10810 (P-6) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Insulation
to 11.2
Thermal Ageing In Air
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Oven On Insulation
1229 Cl 3.2,IS 10810 (P-11) Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Tensile Strength Variation
to 11.2
After Ageing
Thermal Ageing In Air
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Oven On Insulation
1230 Cl 3.2,IS 10810 (P-11)Cl 1
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Variation in Elongation At
to 11.2
Break
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for
1231 Visual Examination IS 8783 (P-1) Cl 4.1.2
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire
IS 8783 (P-4/ sec-1) 1995
ELECTRICAL- CABLES Winding Wires For Submersible Motors (P-4) for Water Absorption by
1232 Cl 3.2, IS 10810 (P-33) Cl
& WIRES Indicidual Wire ,Sec-1, HR PVC Insulated Wire Gravimetric Method
1 to 11.2
ELECTRICAL-
Breaking Load Of
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.3.1 &
1233 Individual Aluminum and
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced 14.1 f
Steel Wire
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Breaking Load On Steel IS 398 (P-2) Cl 13.3 1 &
1234
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced Wire 14.1 f
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.6 &
1235 Conductor Resistance
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced 14.1 j
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 93 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.4 &
1236 Ductility Test
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced 14.1g
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.4.1 &
1237 Ductility Test (Torsion)
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced 14.1g
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.7 &14.1
1238 Galvanising Test
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced k
MATERIALS
ELECTRICAL-
Measurement of Diameter
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) 1996 Cl 14.1
1239 Of individual Aluminum,
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced d & IS 10810 (P-2) Cl 13.2
And Steel Wire
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Measurement Of Lay IS 398 (P-2) Cl 13.8 &
1240
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced Ratio 14.1 e
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission
1241 Overall Diameter IS 398 (P-2) Cl 8.2
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.11 &
1242 Stress Strain
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced 14.1 c
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-2) Cl 13.9 &
1243 Surface Condition
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced 14.1 a
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Ulitame Breaking Load On IS 398 (P-2) Cl 13.10 &
1244
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced Complete Conductor 14.1 b
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 94 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Wrapping On Steel and IS 398 (P-2) Cl 13.5 &
1245
CONDUCTING Purpose, Part-2 Galvanised Steel Reinforced Aluminum Wire 14.1 h
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission IS 398 (P-4) Cl 12.2
1246 Breaking Load
CONDUCTING Purposes Reaffirmed
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Conductor Resistance IS 398 (P-4) Cl 12.4
1247
CONDUCTING Purposes Test (ohms/km) Reaffirmed
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission
1248 Diameter Of Wire IS 398 (P-4) Cl 7
CONDUCTING Purposes
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission
1249 Elongation Test IS 398 (P-4) Cl 12.3
CONDUCTING Purposes
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Measurement Of Lay IS 398 (P-4) Cl 9.2 and
1250
CONDUCTING Purposes Ratio b-2.3 Table-3
MATERIALS
ELECTRICAL-
CONDUCTORS & Aluminum Conductor For Overhead Transmission Overall Diameter of IS 398 (P-4) Cl 7.2.1
1251
CONDUCTING Purposes Complete Conductor Table-1
MATERIALS
ELECTRICAL-
Aluminum Conductors For Overhead
CONDUCTORS & IS 398 (P-1) Cl 12.3 &
1252 Transmission Purposes, Aluminum Stranded Breaking Load Test
CONDUCTING 13.1.b
Conductors
MATERIALS
ELECTRICAL-
Aluminum Conductors For Overhead Measurement Of
CONDUCTORS & IS 398 (P-1) Cl 12.2 &13.1
1253 Transmission Purposes, Aluminum Stranded Diameter Of Individual
CONDUCTING a
Conductors Aluminum Wire
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 95 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
Aluminum Conductors For Overhead
CONDUCTORS & Measurement Of Lay IS 398 (P-1) Cl 12.6 &
1254 Transmission Purposes, Aluminum Stranded
CONDUCTING Ratio 13.1 e
Conductors
MATERIALS
ELECTRICAL-
Aluminum Conductors For Overhead
CONDUCTORS & Overall Diameter Of
1255 Transmission Purposes, Aluminum Stranded IS 398 (P-1) Cl 7.2.1
CONDUCTING Complete Conductor
Conductors
MATERIALS
ELECTRICAL-
Aluminum Conductors For Overhead
CONDUCTORS & IS 398 (P-1) Cl 12.5 &
1256 Transmission Purposes, Aluminum Stranded Resistance Test
CONDUCTING 13.1 d
Conductors
MATERIALS
ELECTRICAL-
Aluminum Conductors For Overhead
CONDUCTORS & Wrapping On Aluminum IS 398 (P-1) Cl 12.4 &
1257 Transmission Purposes, Aluminum Stranded
CONDUCTING Wire 13.1 c
Conductors
MATERIALS
ELECTRICAL-
CONDUCTORS & Conductors For Overhead Lines Round Wire BS EN 50182 Cl 6.4.2, ,
1258 Dimensions
CONDUCTING Concentric lay Stranded Conductors 6.5.2 and Table-5
MATERIALS
ELECTRICAL-
BS EN 50182:2001 Cl
CONDUCTORS & Conductors For Overhead Lines Round Wire
1259 Mass Of Zinc Coating 6.5.2 & Table-5 ,IS
CONDUCTING Concentric lay Stranded Conductors
6745:1972 Cl 3.2 and 5
MATERIALS
ELECTRICAL-
CONDUCTORS & Conductors For Overhead Lines Round Wire Nominal DC Resistance
1260 BS EN 50182 Cl 5.10
CONDUCTING Concentric lay Stranded Conductors Test
MATERIALS
ELECTRICAL-
CONDUCTORS & Conductors For Overhead Lines Round Wire
1261 Resistivity BS EN 50182 Cl 6.5.2
CONDUCTING Concentric lay Stranded Conductors
MATERIALS
ELECTRICAL-
CONDUCTORS & Conductors For Overhead Lines Round Wire BS EN 50182 6.4.7 &
1262 Stress Strain Curves
CONDUCTING Concentric lay Stranded Conductors Annexure-C
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 96 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
CONDUCTORS & Conductors For Overhead Lines Round Wire BS EN 50182 Cl 5.3 &
1263 Surface Condition
CONDUCTING Concentric lay Stranded Conductors 6.4.1
MATERIALS
ELECTRICAL-
CONDUCTORS & Conductors For Overhead Lines Round Wire
1264 Tensile Strength BS EN 50182 Cl 6.5.2 a
CONDUCTING Concentric lay Stranded Conductors
MATERIALS
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1265 Carbon Black Content Table-2, SNo-4.2, BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
60811-605, Cl 4.2
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
CONDUCTORS & Related Accessorioes For Rated Voltages Above Compliance With The BS EN 50397-1 Cl 4.2 & Cl
1266
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered design Requirements 6 Table-2, S No-2.1
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1267 Conductor Resistance Table-2, SNo-1.1 & HD
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
605 S3: Cl 3.1.1
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
Construction And
CONDUCTORS & Related Accessorioes For Rated Voltages Above BS EN 50397-1 Cl 6
1268 Dimensions of The
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered Table-2, SNo-3.2, 4.2.1
Conductor
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
CONDUCTORS & Related Accessorioes For Rated Voltages Above Content,Legibility On
1269 BS EN 50397-1 Cl 5
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered Marking
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1270 Durability On Marking BE EN 50397-1 Cl 5.2
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above Gravimetric Water
1271 Table-2, SNo-7.1,BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered Absorption
60811-402, Cl 4.2
MATERIALS Conductors

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 97 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL- Covered Conductors For Overhead Lines And

BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1272 Hot Set Test Table-2, SNo-6.2,BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
60811-507 Cl 4.3
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
Mechanical Properties BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1273 (Elongation) Before Table-2, SNo-4.1a & BS
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
Ageing EN 60811-501 Cl 4.2
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
Mechanical Properties BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1274 ,Tensile Strength After Table-2, SNo-4.1 b &BS
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
Ageing EN 60811-401 Cl 4.2.3.2
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
Mechanical Propertiies BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1275 (Tensile Strength) Before Table-2, SNo-4.1a & BS
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
Ageing EN 60811-501
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1276 Pressure Test Table-2, SNo-6.3,BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
60811-508 Cl 4.3
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
CONDUCTORS & Related Accessorioes For Rated Voltages Above Rated Tensile Strength On BS EN 50397-1 Cl 6
1277
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered Conductor Table-2, SNo-3.1, 4.2.1
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above Resistance to UV Ray
1278 Table-2, SNo-4.3 ASTM G
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered (Tensile Strength)
154 Cl 9
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above Resistance To UV Rays
1279 Table-2, SNo-4.3ASTM G
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered (Elongation )
154 Cl 9
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1280 Shrinkage Test Table-2, SNo-6.1 & BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
60811-502 Cl 4.2
MATERIALS Conductors

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 98 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL- Covered Conductors For Overhead Lines And

BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above Test For Compatibility
1281 Table-2, SNo-5,BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered (Elongation )
60811-401, Cl 4.2.3.4
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above Test For Compatibility
1282 Table-2, SNo-5 & BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered (Tensile Strength )
60811-401, Cl 4.2.3.4
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above
1283 Thickness On Covering Table-2, SNo-2.2,BS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered
60811-201 Cl 4.2
MATERIALS Conductors
ELECTRICAL- Covered Conductors For Overhead Lines And
BS EN 50397-1, 2020 Cl 6
CONDUCTORS & Related Accessorioes For Rated Voltages Above Mechanical Properties
1284 Table-2, SNo-4.1 bBS EN
CONDUCTING 1kV AC and not exceeding 36 kV AC -Covered (Elongation ) After Ageing
60811-401 Cl 4.2.3.2
MATERIALS Conductors.
ELECTRICAL-
CONDUCTORS & Covered Conductors For Overhead Lines Round Lay Ratio And Direction BS EN 50182 Cl 5.5.2 to
1285
CONDUCTING Wire Concentric Lay Stranded Conductors Of Lay 5.5.7 & 6.4.4
MATERIALS
ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic
INSULATING And Glass Insulator For Using Electrical
1286 Bending Test IEC 62155 Cl 7.2.2
MATERIALS & Equipment With Rated Voltage Greater Than
INSULATORS 1000 V
ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic
INSULATING And Glass Insulator For Using Electrical
1287 Compression Test IEC 62155 Cl 7.2.5
MATERIALS & Equipment With Rated Voltage Greater Than
INSULATORS 1000 V
ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic
INSULATING And Glass Insulator For Using Electrical IEC 62155 :2003
1288 Galvanising Test
MATERIALS & Equipment With Rated Voltage Greater Than Table-2,ISO 1459: Cl 5
INSULATORS 1000 V
ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic
INSULATING And Glass Insulator For Using Electrical
1289 Porosity Test IEC 62155 Cl 7.4
MATERIALS & Equipment With Rated Voltage Greater Than
INSULATORS 1000 V

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 99 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic

INSULATING And Glass Insulator For Using Electrical
1290 Temperature Cycle Test IEC 62155 Cl 7.3
MATERIALS & Equipment With Rated Voltage Greater Than
INSULATORS 1000 V
ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic
INSULATING And Glass Insulator For Using Electrical
1291 Tensile Test IEC 62155 Cl 7.2.4
MATERIALS & Equipment With Rated Voltage Greater Than
INSULATORS 1000 V
ELECTRICAL- Hollow Pressurised And Unpressurised Ceramic
INSULATING And Glass Insulators For Using Electrical
1292 Mechanical Failing Load IEC 62155, Cl 7.2
MATERIALS & Equipment With Rated Voltage Greater Than
INSULATORS 1000 V
ELECTRICAL-
Indoor Post Insulators For Organic Materials For
INSULATING
1293 System With Nominal Voltage Greater Than 1000 Temperature Cycle Test IS 9431 Cl 9.12 & 9.1.1 m
MATERIALS &
V Upto And Including 300 kV
INSULATORS
ELECTRICAL-
Indoor Post Insulators For Organic Materials For Test For Mechanical
INSULATING
1294 System With Nominal Voltage Greater Than 1000 Strength in Standard IS 9431 Cl 9.6 & 9.1.1 e
MATERIALS &
V Upto And Including 300 kV Temperature Condition
INSULATORS
ELECTRICAL-
insulators For Overhead Lines -Composite
INSULATING IEC 61109;2008 Cl 12.1e
1295 Suspension And Tension insulator For AC System Galvanising Test
MATERIALS & and 12.5 ,ISO 1459 Cl 5
With A Nominal Voltage
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines -Composite
INSULATING IEC 61109 Cl 10.4.2.1 and
1296 Suspension And Tension insulator For AC System Mechanical Load Test
MATERIALS & 10.4.2.2
With A Nominal Voltage
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines -Composite
INSULATING Verification Of Locking IEC 61109;2008 Cl 12.1 a
1297 Suspension And Tension insulator For AC System
MATERIALS & System ,IEC 60383-1, Cl 22
With A Nominal Voltage
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines With A nominal
INSULATING Electro Mechanical Failing
1298 Voltage Above 1000 V (P-1) Ceramic And Glass IEC 60383-1 Cl 18.1
MATERIALS & Load
Insulator Units For AC Systems
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 100 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
Insulators For Overhead Lines With A nominal
INSULATING IEC 60383-1:1993 ,
1299 Voltage Above 1000 V (P-1) Ceramic And Glass Galvanising Test
MATERIALS & Table-3,ISO 1459 Cl 5
Insulator Units For AC Systems
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines With A nominal
INSULATING
1300 Voltage Above 1000 V (P-1) Ceramic And Glass Mechanical Failing Load IEC 60383-1 Cl 19
MATERIALS &
Insulator Units For AC Systems
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines With A nominal
INSULATING
1301 Voltage Above 1000 V (P-1) Ceramic And Glass Porosity Test IEC 60383-1 Cl 25.1
MATERIALS &
Insulator Units For AC Systems
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines With A nominal
INSULATING
1302 Voltage Above 1000 V (P-1) Ceramic And Glass Temperature Cycle Test IEC 60383-1 Cl 23
MATERIALS &
Insulator Units For AC Systems
INSULATORS
ELECTRICAL-
Insulators For Overhead Lines With A nominal
INSULATING Verification Of Locking
1303 Voltage Above 1000 V (P-1) Ceramic And Glass IEC 60383-1 Cl 22
MATERIALS & System
Insulator Units For AC Systems
INSULATORS
ELECTRICAL-
Pocelain Insulators For Overhead Power Lines
INSULATING
1304 With a Nominal Voltage Upto And Including 1000 Temperature Cycle Test IS 1445:Cl 8.10 & 8.1 e
MATERIALS &
V
INSULATORS
ELECTRICAL-
Pocelain Insulators For Overhead Power Lines
INSULATING
1305 With a Nominal Voltage Upto And Including 1000 Porosity Test IS 1445 Cl 8.11 & 8.1 h
MATERIALS &
V.
INSULATORS
ELECTRICAL-
INSULATING
1306 Porcelain Guy Strain Insulators Mechanical Strength Test IS 5300 Cl 7.1.1 f &7.4
MATERIALS &
INSULATORS
ELECTRICAL-
INSULATING
1307 Porcelain Guy Strain Insulators Porosity Test IS 5300 Cl 7.1.1 g & 7.7
MATERIALS &
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 101 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
INSULATING
1308 Porcelain Guy Strain Insulators Temperature Cycle Test IS 5300 Cl 7.6 & 7.1.1 c
MATERIALS &
INSULATORS
ELECTRICAL-
Porcelain Insulators For Overhead Power Lines
INSULATING
1309 With a Nominal Voltage Upto And Including 1000 Mechanical Failing Test IS 1445 Cl 8.9 & 8.1.f
MATERIALS &
V.
INSULATORS
ELECTRICAL-
INSULATING Porcelain Insulators For Overhead Power Lines 24 Hours Mechanical
1310 IS 731 Cl 10.1.1.i & 10.9
MATERIALS & With Nominal Voltage Greater Than 1000V Strength Test
INSULATORS
ELECTRICAL-
INSULATING Porcelain Insulators For Overhead Power Lines Electro Mechanical Failing
1311 IS 731 Cl 10.7 & 10.1.1.g
MATERIALS & With Nominal Voltage Greater Than 1000V Load
INSULATORS
ELECTRICAL-
INSULATING Porcelain Insulators For Overhead Power Lines IS 731:1971 Cl 10.1.1.n
1312 Galvanising Test
MATERIALS & With Nominal Voltage Greater Than 1000V and 10.12,IS 2633 Cl 4
INSULATORS
ELECTRICAL-
INSULATING Porcelain Insulators For Overhead Power Lines Mechanical Failing Load IS 731 Cl 10.1.1.h,10.7
1313
MATERIALS & With Nominal Voltage Greater Than 1000V Test and 10.8
INSULATORS
ELECTRICAL-
INSULATING Porcelain Insulators For Overhead Power Lines IS 731 Cl 10.1.1.f,10.6,
1314 Temperature Cycle Test
MATERIALS & With Nominal Voltage Greater Than 1000V 10.14, & 10.15
INSULATORS
ELECTRICAL-
INSULATING Porcelain Insulators For Overhead Power Lines
1315 Porosity Test IS 731 Cl 10.1.1.k & 10.11
MATERIALS & With Nominal Voltage Greater Than 1000V.
INSULATORS
ELECTRICAL-
INSULATING Porcelain Post Insulators For System With IS 2544:1973 Cl 9.1.1 m
1316 Galvanising Test
MATERIALS & Nominal Voltage Greater Than 1000 Volts and 9.11, IS 2633 Cl 4
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 102 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL-
INSULATING Porcelain Post Insulators For System With
1317 Porosity Test IS 2544 Cl 9.10 & 9.1.1 k
MATERIALS & Nominal Voltage Greater Than 1000 Volts
INSULATORS
ELECTRICAL-
INSULATING Porcelain Post Insulators For System With IS 2544 Cl 9.8, 9.13, 9.14
1318 Temperature cycle
MATERIALS & Nominal Voltage Greater Than 1000 Volts & Cl 9.1.1 g
INSULATORS
ELECTRICAL-
INSULATING Porcelain Post Insulators For System With Test For Mechanical
1319 IS 2544 Cl 9.6 & 9.1.1 h
MATERIALS & Nominal Voltage Greater Than 1000 Volts Strength
INSULATORS
ELECTRICAL-
Test On Indoor And Outdoor Post Insulators Of
INSULATING IEC 60168:1994 Cl 6.2.f
1320 Ceramic Materials Or Glass For System With Galvanising Test
MATERIALS & ISO 1459 Cl 5
Nominal Voltage Greater Than 1000 Volt
INSULATORS
ELECTRICAL-
Test On Indoor And Outdoor Post Insulators Of
INSULATING Mechanical Failing Load IS/IEC 60168 C 5.2 ,6.2 c
1321 Ceramic Materials Or Glass For System With
MATERIALS & Test & 6.1.1
Nominal Voltage Greater Than 1000 Volt
INSULATORS
ELECTRICAL-
Test On Indoor And Outdoor Post Insulators Of
INSULATING
1322 Ceramic Materials Or Glass For System With Porosity Test IEC 60168 Cl 5.6 & 6.2 e
MATERIALS &
Nominal Voltage Greater Than 1000 Volt
INSULATORS
ELECTRICAL-
Test On Indoor And Outdoor Post Insulators Of
INSULATING IS/IEC 60168 Cl 5.4 & 6.2
1323 Ceramic Materials Or Glass For System With Temperature Cycle Test
MATERIALS & b
Nominal Voltage Greater Than 1000 Volt
INSULATORS
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With
1324 Bending Test IS 9537 (P-3) Cl 9.2.1
ACCESSORIES Plain Conduits Of Insulating Materials
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With
1325 Compression IS 9537 (P-3) :Cl 9.3
ACCESSORIES Plain Conduits Of Insulating Materials
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With IS 9537 (P-3) Cl 7 to 7.3 &
1326 Dimensions Of Conduit
ACCESSORIES Plain Conduits Of Insulating Materials 9
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With Electrical Characteristics
1327 IS 9537 (P-1):Cl 12.1.1
ACCESSORIES Plain Conduits Of Insulating Materials (Electrical Strrength) Volt

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 103 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With

1328 Insulation Resistance IS 9537 (Part 3) Cl 12.1.2
ACCESSORIES Plain Conduits Of Insulating Materials
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With
1329 Length Of Conduit IS 9537 (P-3) Cl 7.3
ACCESSORIES Plain Conduits Of Insulating Materials
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With Maximum Outside
1330 IS 9537 (P-3) Cl 7.1.1
ACCESSORIES Plain Conduits Of Insulating Materials Diameter
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With
1331 Minimum Inside Diameter IS 9573:1983 Cl 7.2
ACCESSORIES Plain Conduits Of Insulating Materials
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With Minimum Outside
1332 IS 9537 Cl 7.1.1
ACCESSORIES Plain Conduits Of Insulating Materials Diameter
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With
1333 Resistance To Heat °C IS 9537 (P-3) Cl 10
ACCESSORIES Plain Conduits Of Insulating Materials
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With Uniformity Of Wall
1334 IS 9537 (P-3) Cl 7.4
ACCESSORIES Plain Conduits Of Insulating Materials Thickness
ELECTRICAL- WIRING Conduits For Electrical Installations Part-3 With
1335 Verification Of Marking IS 9537 (P-3) Cl 6.1
ACCESSORIES Plain Conduits Of Insulating Materials
Copper Test on Rigid Non
Metallic Conduit Fittings ,
Slip Type
Couplers,Socketed Type
Couplers, Clamp Type
ELECTRICAL- WIRING
1336 Fittings for Rigid Non Metallic Conduits Couplers, Normal Type IS 3419Cl 14 & 18.1 g
ACCESSORIES
Bends, slip Type Coupler
Bends,Normal Type
Elbows, Tees Socketed
Type,Spout Type Circular
Boxes
ELECTRICAL- WIRING
1337 Fittings for Rigid Non Metallic Conduits Insulation Resistance IS 3419 Cl 18.1 k & 17.3
ACCESSORIES
ELECTRICAL- WIRING
1338 Fittings for Rigid Non Metallic Conduits Moisture Absorption IS 3419 Cl 12 & 18.1 e
ACCESSORIES
ELECTRICAL- WIRING
1339 Fittings for Rigid Non Metallic Conduits Resistance To Burning IS 3419 Cl 18.1 d & 11
ACCESSORIES
ELECTRICAL- WIRING
1340 Fittings for Rigid Non Metallic Conduits Resistance To Chemical IS 3419 Cl 18.1 f & 13
ACCESSORIES

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 104 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

ELECTRICAL- WIRING
1341 Fittings for Rigid Non Metallic Conduits Resistance To Heat IS 3419 Cl 11 & 18.1 c
ACCESSORIES
ELECTRICAL- WIRING
1342 Fittings for Rigid Non Metallic Conduits Resistance To Impact IS 3419 Cl 18.1 j & 16
ACCESSORIES
ELECTRICAL- WIRING
1343 Fittings for Rigid Non Metallic Conduits Resistance To Oil IS 3419 Cl18.1 h & 15
ACCESSORIES
ELECTRICAL- WIRING Verification & Checking Of
1344 Fittings for Rigid Non Metallic Conduits IS 3419 Cl 5 , 9 & 18.1 b
ACCESSORIES all Dimensions
ELECTRICAL- WIRING
1345 Fittings for Rigid Non Metallic Conduits verification Of Marking IS 3419 Cl 18.1 a ,5 & 8
ACCESSORIES
MECHANICAL-
IS 2185 (P-3):1984 Cl 8.3 ,
1346 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks Bulk Density
IS: 6441 (P-1):Cl 2 to 5
MATERIALS
MECHANICAL-
IS 2185 (P-3):1984: Cl 8.4
1347 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks Compressive Strength
IS: 6441 (P-5): Cl -2 to 5
MATERIALS
MECHANICAL-
IS 2185 (P-3):1984:Cl 8.6 ,
1348 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks Drying Shrinkage
IS: 6441:(P-2) , Cl 2 to 5
MATERIALS
MECHANICAL-
1349 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks Length IS: 2185 (P-3): Cl 8.2
MATERIALS
MECHANICAL-
IS 2185 (P-3):1984: Cl 8.5
1350 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks Thermal Conductivity
IS: 3346: Cl 5 to 7
MATERIALS
MECHANICAL-
IS: 2185 :1984 (P-3)-Cl
1351 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks Width
8.2
MATERIALS
MECHANICAL-
IS: 2185 :1984, (P-3)-Cl
1352 BUILDINGS Autovlaved Cellular (Aerated) Concrete Blocks 2 Height
8.2 Reaffirmed
MATERIALS
MECHANICAL-
1353 BUILDINGS Cement Concrete Flooring Tiles Dimension-Thickness IS 1237, Cl 7 Table-1
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 105 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
1354 BUILDINGS Cement Concrete Flooring Tiles Dimension-Breadth IS 1237, Cl 7 Table-1
MATERIALS
MECHANICAL-
1355 BUILDINGS Cement Concrete Flooring Tiles Dimensions-Length IS 1237, Cl 7 Table-1
MATERIALS
MECHANICAL-
IS 1237 Cl 12.2 Annexure-
1356 BUILDINGS Cement Concrete Flooring Tiles Flatness (mm)
B
MATERIALS
MECHANICAL-
IS 1237 Cl 12.3,
1357 BUILDINGS Cement Concrete Flooring Tiles Perpendicularity
Annexure-C
MATERIALS
MECHANICAL-
IS 1237 Cl 12.5,
1358 BUILDINGS Cement Concrete Flooring Tiles Water Absorption
Annexure-E
MATERIALS
MECHANICAL-
IS 1237 Cl 12.4,
1359 BUILDINGS Cement Concrete Flooring Tiles, Straightness
Annexure-D
MATERIALS
MECHANICAL-
1360 BUILDINGS Chequred Cement Concrete Tiles Dimension- Breadth IS 13801:Cl 7.1, Table-1
MATERIALS
MECHANICAL-
1361 BUILDINGS Chequred Cement Concrete Tiles Dimension: Thickness IS 13801:Cl 7.1, Table-1,
MATERIALS
MECHANICAL-
1362 BUILDINGS Chequred Cement Concrete Tiles Dimension:Length IS 13801:Cl 7.1, Table-1
MATERIALS
MECHANICAL-
IS 13801: Cl 12.2,
1363 BUILDINGS Chequred Cement Concrete Tiles Perpendicularity-
Annexure-C
MATERIALS
MECHANICAL-
IS 13801: Cl 12.3 ,
1364 BUILDINGS Chequred Cement Concrete Tiles Straightness
Annexure--D,
MATERIALS
MECHANICAL-
Surface Flatness of Tile IS 13801:Cl 12.1
1365 BUILDINGS Chequred Cement Concrete Tiles
Surface Annexure B
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 106 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
IS 13801:Cl 12.4,
1366 BUILDINGS Chequred Cement Concrete Tiles Water Absorption
Annexure E,
MATERIALS
MECHANICAL-
IS 383:2016 Cl 5.4.1 ,IS
1367 BUILDINGS Coarse and Fine Aggregate Crushing Value as per
:2386: Part:4:Cl 2
MATERIALS
MECHANICAL-
Materials Finer Than 75 IS 383:2016 Cl 5.2 IS
1368 BUILDINGS Coarse and Fine Aggregate for Concrete
microns IS Sieve 2386 (P-1):Cl 3
MATERIALS
MECHANICAL-
1369 BUILDINGS Coarse and Fine Aggregate for Concrete 10% Fines Value IS 2386 Part-4:Cl 3
MATERIALS
MECHANICAL-
Combined Flakkiness and IS 383:2016, Cl 5.3,
1370 BUILDINGS Coarse and Fine Aggregate for Concrete
Elongation Index IS:2386: (P-1) Cl 4 & 5
MATERIALS
MECHANICAL-
Deleterious Material, Clay IS 383:2016, Cl 5.3,
1371 BUILDINGS Coarse and Fine Aggregate for Concrete
Lumps as per IS:2386:Part:2: Cl 2,
MATERIALS
MECHANICAL-
Grading of Aggregate IS 383:2016, Cl 6.1 and
1372 BUILDINGS Coarse and Fine Aggregate for Concrete
(Sieve Analysis) 6.2 IS:2386 :Part-01:Cl 2.
MATERIALS
MECHANICAL-
IS 383:2016, Cl 5.4.2 IS
1373 BUILDINGS Coarse and Fine Aggregate for Concrete Impact Value
2386 ( P-4 ) Cl 4
MATERIALS
MECHANICAL-
Loss Angels Abrasion IS 383:2016, Cl 5.4.3 ,IS
1374 BUILDINGS Coarse and Fine Aggregate for Concrete
Value 2386 ( P-4 ) Cl 5
MATERIALS
MECHANICAL-
IS 383:2016, IS: 2386
1375 BUILDINGS Coarse and Fine Aggregate for Concrete Organic Impurities
(P-2): Cl 3
MATERIALS
MECHANICAL- IS 383:2016, CPWD
1376 BUILDINGS Coarse and Fine Aggregate for Concrete Silt Content Volume-1, Appendix-C, Cl
MATERIALS 3.1.3.2
MECHANICAL-
IS 383: 2016, Cl 5.5.1 IS:
1377 BUILDINGS Coarse and Fine Aggregate for Concrete Soundness By MgSO4
2386 (P-5): Cl 2 to 7
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 107 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
IS 383:2016, Cl 5.5.1, IS:
1378 BUILDINGS Coarse and Fine Aggregate for Concrete Soundness By Na2SO4
2386 (P-5) Cl 2 to 6
MATERIALS
MECHANICAL- IS 383:2016, Cl 5.7
1379 BUILDINGS Coarse and Fine Aggregate for Concrete Specific Gravity Table-3 , IS 2386 ( P-3 ) Cl
MATERIALS 2
MECHANICAL- IS 383:2016, Cl 5.7
Unit Weight (Bulk
1380 BUILDINGS Coarse and Fine Aggregate for Concrete Table-3 , IS 2386 (P-3), Cl
Density)
MATERIALS 3
MECHANICAL- IS 383:2016, Cl 5.7
1381 BUILDINGS Coarse and Fine Aggregate for Concrete Water Absorption Table-3, IS 2386 ( P-3 ) Cl
MATERIALS 2
MECHANICAL-
IS 1077:1992 , Cl 7.1, IS
1382 BUILDINGS Common Burnt Clay Building Bricks Compressive Strength
3495 ( P-1 ), Cl 4
MATERIALS
MECHANICAL-
1383 BUILDINGS Common Burnt Clay Building Bricks Dimensions-Height IS 1077 :Cl 6
MATERIALS
MECHANICAL-
1384 BUILDINGS Common Burnt Clay Building Bricks Dimensions-Length IS 1077 Cl 6
MATERIALS
MECHANICAL-
1385 BUILDINGS Common Burnt Clay Building Bricks Dimensions-Width IS 1077:Cl 6 , Reaffirmed
MATERIALS
MECHANICAL-
IS 1077:1992 , Cl 7.3 , IS
1386 BUILDINGS Common Burnt Clay Building Bricks Effloresence
3495 ( P-3 ), Cl 4
MATERIALS
MECHANICAL-
IS 1077:1992, Cl 7.2, IS
1387 BUILDINGS Common Burnt Clay Building Bricks Water Absorption
3495 ( P-2 ) Cl 4.1
MATERIALS
MECHANICAL-
1388 BUILDINGS Glass Wool Insulation Thermal Conductivity IS 3346:1980 Reaffirmed
MATERIALS
MECHANICAL-
1389 BUILDINGS Hardened Concrete Splitting Tensile Strength IS: 516 (P-1/Sec.1)-Cl 5
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 108 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
1390 BUILDINGS Hardened Concrete Compressive Strength IS 516 (P-1/Sec-1)
MATERIALS
MECHANICAL-
IS: 9013: 1978, Cl 2,3,5,6
1391 BUILDINGS Hardened Concrete Compressive Strength
and 7
MATERIALS
MECHANICAL-
Depth of penetration of
1392 BUILDINGS Hardened Concrete IS 516 (P-2) Sec-1, Cl-5
water under pressure
MATERIALS
MECHANICAL-
IS: 516 (P-6):2020 Cl 4,5,6
1393 BUILDINGS Hardened Concrete Drying Shrinkage
and 7
MATERIALS
MECHANICAL-
1394 BUILDINGS Hardened Concrete Flexural Strength IS: 516 (P-1/Sec.1)- Cl 4
MATERIALS
MECHANICAL-
IS: 516 (P-6), Cl 4,5,6 and
1395 BUILDINGS Hardened Concrete Moisture Movement
8-
MATERIALS
MECHANICAL-
1396 BUILDINGS Hardened Concrete Water Absorption BS 1881 (P-122): + A1
MATERIALS
MECHANICAL-
1397 BUILDINGS Hollow Steel Section For Structural Use Depth IS: 4923:Cl 10.2
MATERIALS
MECHANICAL-
1398 BUILDINGS Hollow Steel Section For Structural Use Thickness IS: 4923, Cl 10.3
MATERIALS
MECHANICAL-
1399 BUILDINGS Hollow Steel Section For Structural Use Weight IS: 4923, Cl 9, Table 1 & 2
MATERIALS
MECHANICAL-
1400 BUILDINGS Hollow Steel Section For Structural Use Width IS: 4923, Cl 10.2
MATERIALS
MECHANICAL-
Hot Rolled Medium and High Tensile Structural
1401 BUILDINGS Leg Length IS 808 Cl 7
Steel
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 109 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
Hot Rolled Medium and High Tensile Structural
1402 BUILDINGS Mass Per meter IS 808 Cl 7
Steel
MATERIALS
MECHANICAL-
Hot Rolled Medium and High Tensile Structural
1403 BUILDINGS Mass Per Meter S 1730: Cl 4, 5, 6 and 7
Steel
MATERIALS
MECHANICAL-
Hot Rolled Medium and High Tensile Structural
1404 BUILDINGS Thickness IS 808: Cl 7
Steel
MATERIALS
MECHANICAL- IS 269:2015, Table-3, Cl
1405 BUILDINGS Ordinary Portland Cement Compressive Strength 7, IS 4031 ( P-6 ) Cl 3 to
MATERIALS Cl 8
MECHANICAL-
1406 BUILDINGS Ordinary Portland Cement Consistency IS 4031 ( P-4 ) , Cl 3 to 6
MATERIALS
MECHANICAL-
Final and initial Setting IS 269:2015, Cl 7, Table 3
1407 BUILDINGS Ordinary Portland Cement
Time ,IS4031 ( P-5 ) Cl 3 to Cl 6
MATERIALS
MECHANICAL-
Fineness by Blain Air IS 269:2015, Cl 7, Table 3
1408 BUILDINGS Ordinary Portland Cement
Permeability IS 4031 ( P-2 ) Cl 4 & 5
MATERIALS
MECHANICAL-
IS 269:2015, Cl 7, Table
1409 BUILDINGS Ordinary Portland Cement Soundness by Autoclave
3, IS 4031 ( P-3 ) Cl 3 & 6
MATERIALS
MECHANICAL-
IS 269:2015, Cl 7,Table 3,
1410 BUILDINGS Ordinary Portland Cement Soundness by Lechatlier
IS 4031 ( P-3 )
MATERIALS
MECHANICAL-
1411 BUILDINGS Paving Bitumen Ductility IS 73; 2013 , IS 1208 Cl 4
MATERIALS
MECHANICAL-
1412 BUILDINGS Paving Bitumen Flash Point IS 73:2013, IS 1448 (P-69)
MATERIALS
MECHANICAL- IS 73 :2013, Table-1, Cl
1413 BUILDINGS Paving Bitumen Penetration @ 25°C 6.2(i), IS 1203:Cl 3.1 to Cl
MATERIALS 5

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 110 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL- IS 73:2013 , Table-1, Cl

1414 BUILDINGS Paving Bitumen Softening Point 6.2 (vi) IS 1205: Cl 3.1 to
MATERIALS Cl 5
MECHANICAL-
Solubility IS 73:2013 Table-1, Cl 6.2
1415 BUILDINGS Paving Bitumen
inTrichloroethylene (v), IS 1216 Cl 2 to 2.6
MATERIALS
MECHANICAL- IS 1489 (P-1) 2015 Cl 7
Final and initial Setting
1416 BUILDINGS Portland Pozzolana Cement Fly Ash Based Table-2 , IS 4031 (P-5) Cl
Time
MATERIALS 3 to 6
MECHANICAL- IS 1489 (P-1) 2015 Cl 7
1417 BUILDINGS Portland Pozzolana Cement Fly Ash Based Soundness by Autoclave Table-2 , IS 4031 (P-3) Cl
MATERIALS 3&6
MECHANICAL- IS 1489 (P-1):2015 Cl 7
1418 BUILDINGS Portland Pozzolana Cement Fly-Ash Based Compressive Strength, Table-2 IS 4031 (P-6) Cl 3
MATERIALS to 8
MECHANICAL- IS 1489(P-1):2015 Cl 7
1419 BUILDINGS Portland Pozzolana Cement Fly-Ash Based Consistency Table-2 IS 4031 (P-4) Cl 3
MATERIALS to 6
MECHANICAL- IS 1489(P-1):2015 Cl 7
Fineness by Blain Air
1420 BUILDINGS Portland Pozzolana Cement Fly-Ash Based Table-2 IS 4031 (P-2) Cl 4
permeability
MATERIALS and 5 ,
MECHANICAL- IS 1489(P-1):2015 Cl 7
1421 BUILDINGS Portland Pozzolana Cement Fly-Ash Based Soundness by Lechatlier Table-2, IS 4031 (P-3) Cl 3
MATERIALS &5
MECHANICAL-
Length, Table-1, Cl IS 15658:,Table-1, Cl
1422 BUILDINGS Precast Concrete Blocks For Paving
6.2.2.1, Annexure-B 6.2.2.1
MATERIALS
MECHANICAL- IS 15658:,Cl 6.2.5 to
1423 BUILDINGS Precast Concrete Blocks For Paving Compressive Strength 6.2.5.2 & Cl 9.1.4,
MATERIALS Annexure-D
MECHANICAL-
Thickness.Table-2, Cl IS 15658, Cl, 6.2.2.1,
1424 BUILDINGS Precast Concrete Blocks For Paving
6.2.2.1, Annexure-B Annexure-B
MATERIALS
MECHANICAL- Water Absorption,
IS 15658, Cl 6.2.4,
1425 BUILDINGS Precast Concrete Blocks For Paving Table-4, Cl 6.2.4
Annexure-C
MATERIALS Annexure-C

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 111 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
Width Table-2, Cl 6.2.2.1, IS 15658:Table-2, Cl
1426 BUILDINGS Precast Concrete Blocks For Paving
Annexure-B 6.2.2.1, Annexure-B
MATERIALS
MECHANICAL- IS 5758: 2020, Cl 9.2,
Precast Concrete Krebs,Channels,Edgings,
1427 BUILDINGS Compressive Strength Annexure-B, IS 516 P-4)
Quadrants, an other associated fittings
MATERIALS Cl 4 to Cl 8
MECHANICAL-
Precast Concrete Krebs,Channels,Edgings, IS: 5758 Cl 9.2 Annexure-
1428 BUILDINGS Length
Quadrants, an other associated fittings B:
MATERIALS
MECHANICAL-
Precast Concrete Krebs,Channels,Edgings, IS 5758 Cl 9.2, Annexure-
1429 BUILDINGS Thickness
Quadrants, an other associated fittings B:
MATERIALS
MECHANICAL-
Precast Concrete Krebs,Channels,Edgings, IS 5758:Cl 9.4 Annexure-
1430 BUILDINGS Water Absorption
Quadrants, an other associated fittings D
MATERIALS
MECHANICAL-
Precast Concrete Krebs,Channels,Edgings, IS 5758 Cl 9.2, Annexure-
1431 BUILDINGS Width
Quadrants, and other associated fittings B:
MATERIALS
MECHANICAL- IS 15622:2017, Cl 6,
1432 BUILDINGS Pressed Ceramic Tiles Breaking Strength Table-5 (ii) a, IS 13630 :(
MATERIALS P-6 ) Cl 6 to 8:
MECHANICAL- IS 15622:2017, Cl 6,
1433 BUILDINGS Pressed Ceramic Tiles Moisture Expansion Table-5 (ii) d IS 13630: (
MATERIALS P-3 ), Cl 5 to 6.2:
MECHANICAL- IS 15622:2017, Cl 6,
Scratch Hardness of
1434 BUILDINGS Pressed Ceramic Tiles Table-5 (ii) c IS 13630,(
Surface
MATERIALS P-13), Cl 5 to 6
MECHANICAL- IS 15622:2017, Cl 6,
1435 BUILDINGS Pressed Ceramic Tiles Water Absorption Table-5 (ii) a , IS 13630 (
MATERIALS P-2 ) Cl 2.1
MECHANICAL- Particles Retained on 45
IS 3812(P-1):2013, Cl 7
1436 BUILDINGS Pulverized Fuel Ash micron IS Sieve (Wet
Table-2 IS 1727 Cl 6.2.5
MATERIALS Sieving)
MECHANICAL-
IS 3812 (P-1):2013 , Cl 7,
1437 BUILDINGS Pulverized Fuel Ash , Compressive Strength
Table-2 IS 1727, Cl 10
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 112 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
Fineness by Blain Air IS 3812(P-1):2013 Cl 7,
1438 BUILDINGS Pulverized Fuel Ash ,
Permeability Table-2 IS 1727 Cl 6
MATERIALS
MECHANICAL-
IS 12894:2002 , Cl 7.1, IS
1439 BUILDINGS Pulverized Fuel Ash Lime Bricks Compressive Strength
3495 (P-1) Cl 4
MATERIALS
MECHANICAL-
IS 12894:2002 Cl 7.3 IS
1440 BUILDINGS Pulverized Fuel Ash Lime Bricks Effloresence
3498 (P-3) Cl 4
MATERIALS
MECHANICAL-
1441 BUILDINGS Pulverized Fuel Ash Lime Bricks Height IS 12894:Cl 5
MATERIALS
MECHANICAL-
1442 BUILDINGS Pulverized Fuel Ash Lime Bricks Length IS 12894 Cl 5
MATERIALS
MECHANICAL-
1443 BUILDINGS Pulverized Fuel Ash Lime Bricks Width IS 12894;Cl 5
MATERIALS
MECHANICAL-
IS 12894:2002 Cl 7.4 , IS
1444 BUILDINGS Pulverized Fuel Ash Lime Bricks Water Absorption
3495 (P-2) : Cl 4.1
MATERIALS
MECHANICAL-
Steel Tubes Tublars and other Wrought Steel
1445 BUILDINGS Outside Diameter IS: 1239 (P-1): Cl 8
Fittings
MATERIALS
MECHANICAL- IS 1239 (P-1):2004, Cl
Steel Tubes, Tublars and other wrought Steel
1446 BUILDINGS Bend Test 14.2 IS: 2329- Cl 4,5,and
Fittings
MATERIALS 6
MECHANICAL-
Steel Tubes, Tublars and other wrought Steel IS: 1239 (P-1):Cl 8,
1447 BUILDINGS Mass
Fittings Table-3,4 and 5
MATERIALS
MECHANICAL-
Steel Tubes, Tublars and other wrought Steel IS: 1239 (P-1):Cl 8 Table
1448 BUILDINGS Outside Diameter
Fittings 3, 4 & 5
MATERIALS
MECHANICAL-
Steel Tubes, Tublars and other wrought Steel IS: 1239 (P-1) : Cl 8,
1449 BUILDINGS Wall Thickness
Fittings Table-3,4,and 5
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 113 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
MECHANICAL
1450 Cold Reduced Low carbon Steel Sheet & Strip Bend Test IS 1599 Cl 4, 5, 6 and 7
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1451 Cold Reduced Low carbon Steel Sheet & Strip Elongation IS 1608 (P-1) Cl :20
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1452 Cold Reduced Low carbon Steel Sheet & Strip Hardness IS 1586 (P-1) Cl,5,6,7
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1453 Cold Reduced Low carbon Steel Sheet & Strip Hardness IS 1586(P-1 ) Cl 5,6,7
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1454 Cold Reduced Low carbon Steel Sheet & Strip Tensile Strength IS 1608 (P-1) Cl 10.3.3.3
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1455 Cold Reduced Low carbon Steel Sheet & Strip Yield Stress IS 1608 (P-1) Cl 10.3.3.3
PROPERTIES OF
METALS
MECHANICAL-
IS 3052 , Cl 8 IS 3052 ,Cl
MECHANICAL
1456 Cold Rolled Brass Sheets, Strips & Foils Dimensions-Thickness 4, 4.1, 4.2, 4.3, 4.4, 4.5
PROPERTIES OF
and Table-1,2,3,4 & 5
METALS
MECHANICAL-
MECHANICAL IS 410:1977 , Cl 7 & 7.1.1
1457 Cold Rolled Brass Sheets, Strips & Foils Tensile Strength
PROPERTIES OF IS 1608 (P-1), Cl 10.3.3.3
METALS
MECHANICAL-
IS 410:1977, Cl 7.1.3,
MECHANICAL
1458 ColdRolled Brass Sheets, Strips & Foils Bend Test Table-2,IS 1599 Cl 4,5,6 &
PROPERTIES OF
7
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 114 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
IS 410:1977 Cl 7 and
MECHANICAL
1459 ColdRolled Brass Sheets, Strips & Foils Elongation 7.1.1, Table-2 IS 1608
PROPERTIES OF
(P-1), Cl 20
METALS
MECHANICAL-
MECHANICAL IS 410:1977 , Cl 4 IS 410
1460 ColdRolled Brass Sheets, Strips & Foils Freedom From Defects
PROPERTIES OF Cl 4
METALS
MECHANICAL-
IS 278:2009 Cl; 12,
MECHANICAL Breaking Strength Of
1461 Galvanized Steel Barbed Wire For Fencing Table-2, Type-A & Type B
PROPERTIES OF Complete Barbed Wire
IS 1608 (P-1) ,Cl 10.3.3.3
METALS
MECHANICAL-
MECHANICAL IS 278:,Type-A & Type-
1462 Galvanized Steel Barbed Wire For Fencing Diameter Of Line Wire
PROPERTIES OF B,Cl; 5, Table-1
METALS
MECHANICAL-
MECHANICAL
1463 Galvanized Steel Barbed Wire For Fencing Diameter of Point Wire IS 278 2009 , Cl 5 Table-1
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1464 Galvanized Steel Barbed Wire For Fencing Freedom From Defects IS 278 ,Cl 9 to 9.2
PROPERTIES OF
METALS
MECHANICAL-
IS 278:2009 ,Type-A &
MECHANICAL
1465 Galvanized Steel Barbed Wire For Fencing Mass Of Zinc Coating Type-B, Cl; 12.2 to 12.2.2
PROPERTIES OF
IS 6745 Cl 3.2 and 5
METALS
MECHANICAL-
IS 278:2009 ,Type-A &
MECHANICAL
1466 Galvanized Steel Barbed Wire For Fencing Tensile Strength Type-B, Cl;12 Table-2 IS
PROPERTIES OF
1608 (P-1) Cl 10.3.3.3:
METALS
MECHANICAL-
IS 278:2009 ,Type-A &
MECHANICAL
1467 Galvanized Steel Barbed Wire For Fencing Wrapping Test Type-B, Cl;12.3, IS 1755
PROPERTIES OF
Cl 4, 5 & 6
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 115 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
MECHANICAL
1468 Grey Cast Iron Brinell Hardness IS 1500 (P-1)
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL High Strength Deformed Steel Bars and Wires for IS1786:2008 , Cl 9.3 IS
1469 Bend Test
PROPERTIES OF Concrete Reinforcement 1599, Cl 4,5,6 & 7
METALS
MECHANICAL-
MECHANICAL High Strength Deformed Steel Bars and Wires for
1470 Mass Per Meter IS 1786 ,Cl 7.2, Table-2
PROPERTIES OF Concrete Reinforcement
METALS
MECHANICAL-
MECHANICAL High Strength Deformed Steel Bars and Wires for
1471 Rebend Test IS 1786 ,Cl 9.4
PROPERTIES OF Concrete Reinforcement
METALS
MECHANICAL-
IS 1786:2008 Cl 8, Cl
MECHANICAL High Strength Deformed Steel Bars and Wires for
1472 Yield Stress 9.2,IS 1608 (P-1), Cl
PROPERTIES OF Concrete Reinforcement IS 1786:2008 Cl 8, Cl 9.2
10.3.3.2
METALS
MECHANICAL-
MECHANICAL High Strength Deformed Steel Bars and Wires for IS 1786:2008,Cl 5.7, IS
1473 Pullout Test
PROPERTIES OF Concrete Rreinforcement 2770 ( Part-1 ) Cl 2 to 5
METALS
MECHANICAL-
MECHANICAL HighStrength Deformed Steel Bars and Wires For IS 1786:2008 Cl 3.3,8, 9
1474 Elongation
PROPERTIES OF Concrete Reinforcement Table-3 IS 1608 Cl 20
METALS
MECHANICAL-
IS 1786:2008, Cl 8, 9 ,
MECHANICAL HighStrength Deformed Steel Bars and Wires For
1475 Tensile Strength Table-3 IS 1608 (P-1) Cl
PROPERTIES OF Concrete Reinforcement
10.3.3.3
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1476 Bend Test IS 1599 Cl 4, 5, 6 and 7
PROPERTIES OF Steel
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 116 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1477 Charpy Impact IS 1757 (P-1) Cl 6 to 8
PROPERTIES OF Steel
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural Dimensions Steel Round
1478 IS 1732 Cl 4
PROPERTIES OF Steel And Square
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1479 Elongation IS 1608 (P-1), Cl 20
PROPERTIES OF Steel
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural Mass Per meter Steel Bars
1480 IS 1732 Cl 4 Table-1
PROPERTIES OF Steel Round And Square
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1481 Tensile Strength IS 1608 (P-1): Cl 10.3.3.3
PROPERTIES OF Steel
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1482 Thickness IS 1730:Cl 4, 5, 6 and 7
PROPERTIES OF Steel
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1483 Width IS 1730 Cl 6 and 7
PROPERTIES OF Steel
METALS
MECHANICAL-
MECHANICAL Hot Rolled Medium and High Tensile Structural
1484 Yield Stress IS 1608 (P-1), Cl 10.3.2.3
PROPERTIES OF Steel
METALS
MECHANICAL-
IS 432 (P-1) :1982, Cl 8.1
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1485 Elongation. and 9.2 , IS 1608 (P-1) Cl
PROPERTIES OF Hand Drawn Steel Wire for Concrete
20:
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 117 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1486 Mass IS 432 ( P-1 ) Cl 6.2
PROPERTIES OF Hand Drawn Steel Wire for Concrete
METALS
MECHANICAL-
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1487 Nominal Size IS 432 (P-1) 1982, Cl 6 ,
PROPERTIES OF Hand Drawn Steel Wire for Concrete
METALS
MECHANICAL-
IS 432 (P-1) :1982, Cl 8.1,
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1488 Ultimate Tensile Stress 9.2, Table-1 , IS 1608
PROPERTIES OF Hand Drawn Steel Wire for Concrete
(P-1): Cl,10.3.3.3
METALS
MECHANICAL-
IS 432 (P-1) :1982, Cl 8.1,
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1489 Yield Stress 9.2, Table-1, IS 1608
PROPERTIES OF Hand Drawn Steel Wire for Concrete
(P-1), Cl 10.3.3.2
METALS
MECHANICAL-
MECHANICAL Mild Steel and Medium Tensile Steel Bars and IS 432 (P-1) :1982, Cl 8.3
1490 Bend Test
PROPERTIES OF Hand Drawn Steel Wire for Concrete Mild Steel IS 1599 :Cl 4 , 5 6 & 7
METALS
MECHANICAL-
IS 432 (P-2) :1982 Cl 7
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1491 0.2% Proof Stress and 8.2 , IS 1608 (P-1), Cl
PROPERTIES OF Hard Drawn Steel Wire for Concrete
10.3.3.2
METALS
MECHANICAL-
IS 432 (P-2) :1982, Cl 7
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1492 Elongation. and 8.2 ,IS 1608 (P-1), Cl
PROPERTIES OF Hard Drawn Steel Wire for Concrete
20
METALS
MECHANICAL-
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1493 Nominal Size IS 432 ( P- 2)
PROPERTIES OF Hard Drawn Steel Wire for Concrete
METALS
MECHANICAL-
IS 432 (P-2) :1982, Cl 7,
MECHANICAL Mild Steel and Medium Tensile Steel Bars and
1494 Ultimate Tensile Stress 8.2,9.2 IS 1608 (P-1), Cl
PROPERTIES OF Hard Drawn Steel Wire for Concrete
10.3.3.3
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 118 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
MECHANICAL
1495 Mild Steel Wire For General Engineering Purposes Bend Test IS 280: Cl 9.3
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL IS 280:2006 Cl 11.1, IS
1496 Mild Steel Wire For General Engineering Purposes Mass Of Zinc Coating
PROPERTIES OF 6745, Cl 3.1
METALS
MECHANICAL-
MECHANICAL IS 280:2006 ,Cl 9.1 IS
1497 Mild Steel Wire For General Engineering Purposes Tensile Strength
PROPERTIES OF 1608 (P-1) Cl 10.3.3.3:
METALS
MECHANICAL-
MECHANICAL IS 280:2006, Cl 9.2 , IS
1498 Mild Steel Wire For General Engineering Purposes Wrapping Test
PROPERTIES OF 1755 Cl 3,4,5 & 6
METALS
MECHANICAL-
MECHANICAL
1499 Stainless Steel Plates, Sheets and Strips Elongation IS 1608 (P-1) Cl 20
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1500 Stainless Steel Plates, Sheets and Strips Hardness IS 1586 (P-1) Cl 5, 6 & 7
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1501 Stainless Steel Plates, Sheets and Strips Yield Stress IS 1608 (P-1) Cl 10.3.3.2
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL
1502 Stainless Steel Plates, Sheets and Stripsas Tensile Strength IS 1608 (P-1), Cl 10.3.3.3
PROPERTIES OF
METALS
MECHANICAL-
MECHANICAL IS 1161:2014, Cl 11.2, IS
1503 Steel Tubes For Structural Purposes Elongation
PROPERTIES OF 1608 (P-1) Cl 20
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 119 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
MECHANICAL IS 1161 :2014 Cl 11.3.2 IS
1504 Steel Tubes For Structural Purposes Flattening Test
PROPERTIES OF 2328 Cl 4,5,6 & 7
METALS
MECHANICAL-
MECHANICAL IS 1161 :2014 Cl 8 , IS
1505 Steel Tubes For Structural Purposes Mass Of Zinc Coating
PROPERTIES OF 6745 , Cl 12.2, 12.2.2
METALS
MECHANICAL-
MECHANICAL IS 1161 :2014 Cl 11.2 IS
1506 Steel Tubes For Structural Purposes Tensile Strength
PROPERTIES OF 1608 (P-1), Cl 10.3.3.3
METALS
MECHANICAL-
IS 1161 :2014 Cl 6,
MECHANICAL
1507 Steel Tubes For Structural Purposes Weight Table-1, IS 1161 2014, Cl
PROPERTIES OF
6, Table-1
METALS
MECHANICAL-
MECHANICAL IS 1161 :2014 Cl 11.2 IS
1508 Steel Tubes For Structural Purposes Yield Stress
PROPERTIES OF 1608:(P-1), Cl 10.3.3.2
METALS
MECHANICAL-
IS 4454 (Part 1), Cl 9, 9.1
MECHANICAL Steel Wire For Mechanical Springs, Patent and
1509 Dimensions-Diameter and 9.2 , Table-4 &
PROPERTIES OF Cold Drawn , Unalloyed Steel Wire
Table-5 Reaffirmed :
METALS
MECHANICAL-
MECHANICAL Steel Wire For Mechanical Springs, Patent and IS 4454 ( P-1 ) 2001, Cl 8
1510 Freedom From Defects,
PROPERTIES OF Cold Drawn , Unalloyed Steel Wire Reaffirmed :
METALS
MECHANICAL-
MECHANICAL Steel Wire For Mechanical Springs, Patent and IS 4454 (P-1):2001, IS
1511 Mass Of Zinc Coating
PROPERTIES OF Cold Drawn , Unalloyed Steel Wire 6745 , Cl 3.1
METALS
MECHANICAL-
IS 4454 (P-1):2001, ,. Cl
MECHANICAL Steel Wire For Mechanical Springs, Patent and
1512 Tensile Test 10, 10.3, Table-5 IS 1608
PROPERTIES OF Cold Drawn , Unalloyed Steel Wire
(P-1) , Cl 10.3.3.3
METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 120 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
IS 4454 (P-1):2001, Cl
MECHANICAL Steel Wire For Mechanical Springs, Patent and
1513 Torsion Test 10.3 to 10.3.4 Table-6 IS
PROPERTIES OF Cold Drawn , Unalloyed Steel Wire
1717, Cl 4,5,6,7,8
METALS
MECHANICAL-
MECHANICAL Steel Wire For Mechanical Springs, Patent and IS 4454 (P-1):2001, . Cl
1514 Wrapping Test
PROPERTIES OF Cold Drawn , Unalloyed Steel Wire 4,5,6 IS:1755, Cl 4,5,6
METALS
MECHANICAL-
MECHANICAL Un-coated Stress Releived Low Relaxation Seven
1515 Length Of Lay IS 14268 , Annexure-A
PROPERTIES OF Wire (Ply) Strand for Pre-stressed Concrete
METALS
MECHANICAL-
MECHANICAL Un-coated Stress Releived Low Relaxation Seven IS 14268:2022, Cl 6.2.2 ,
1516 0.2% Proof Stress
PROPERTIES OF Wire (Ply) Strand for Pre-stressed Concrete IS 1608 (P-1), Cl 10.3.3.2
METALS
MECHANICAL-
MECHANICAL Un-coated Stress Releived Low Relaxation Seven IS 14268:2022, Cl 6.2.2 IS
1517 Breaking Strength
PROPERTIES OF Wire (Ply) Strand for Pre-stressed Concrete 1608 (P-1) Cl 10.3.3.3
METALS
MECHANICAL-
MECHANICAL Un-coated Stress Releived Low Relaxation Seven
1518 Elongation IS 14268: Cl 6.2.3
PROPERTIES OF Wire (Ply) Strand for Pre-stressed Concrete
METALS
MECHANICAL-
MECHANICAL Un-coated Stress Releived Low Relaxation Seven Nominal Diameter (mm)
1519 IS 14268, Annexure-A
PROPERTIES OF Wire (Ply) Strand for Pre-stressed Concrete of Strand
METALS
MECHANICAL-
MECHANICAL Un-coated Stress Releived Low Relaxation Seven Nominal Mass Per Unit
1520 IS 14268, Annexure-B
PROPERTIES OF Wire (Ply) Strand for Pre-stressed Concrete Length Of Strand
METALS
MECHANICAL-
Chlorinated Polyvinyl Chloride (CPVC) Pipes for IS 15778:2007 Cl 9.6 , IS
1521 PLASTICS AND Density
potable hot and cold water distribution supplies 12235 (P-14) : Cl 5,6,7,8
PLASTIC PRODUCTS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 121 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
Chlorinated Polyvinyl Chloride (CPVC) Pipes for IS 15778:2007 Cl 7.1.1 ,
1522 PLASTICS AND Diameter at any Point
potable hot and cold water distribution supplies IS 12235 (P-1): Cl 4
PLASTIC PRODUCTS
MECHANICAL- IS 15778:2007 Cl 10.1
Chlorinated Polyvinyl Chloride (CPVC) Pipes for
1523 PLASTICS AND Hydrostatic Pressure Table-3 , IS 12235
potable hot and cold water distribution supplies
PLASTIC PRODUCTS (P-8/Sec-1) :2004 Cl 3 to 8
MECHANICAL- IS 15778:2007 Cl 7.1,
Chlorinated Polyvinyl Chloride (CPVC) Pipes for
1524 PLASTICS AND Mean Outside Diameter Table-2 , IS 12235 (P-1) Cl
potable hot and cold water distribution supplies
PLASTIC PRODUCTS 3
MECHANICAL- IS 15778:2007 Cl 10.3,
Chlorinated Polyvinyl Chloride (CPVC) Pipes for Resistance to external
1525 PLASTICS AND Table-4 , IS 4985:Cl 11.2
potable hot and cold water distribution supplies blows
PLASTIC PRODUCTS ,Annexure-C
MECHANICAL-
Chlorinated Polyvinyl Chloride (CPVC) Pipes for IS 15778:2007 Cl 9.4, IS
1526 PLASTICS AND Reversion Test
potable hot and cold water distribution supplies 12235 (P-5/Sec-1 and 2)::
PLASTIC PRODUCTS
MECHANICAL- IS 15778:2007 Cl 10.5
Chlorinated Polyvinyl Chloride (CPVC) Pipes for
1527 PLASTICS AND Tensile Strength at yield Table-3 , IS 12235 (P-13)
potable hot and cold water distribution supplies
PLASTIC PRODUCTS :2004 Cl 3 to 8
MECHANICAL-
Chlorinated Polyvinyl Chloride (CPVC) Pipes for Vicat Softening IS 15778:2007 Cl 9.5 ,IS
1528 PLASTICS AND
potable hot and cold water distribution supplies Temperature 12235 (P-2): Cl 3,4,5
PLASTIC PRODUCTS
MECHANICAL-
Chlorinated Polyvinyl Chloride (CPVC) Pipes for IS 15778:2007 Cl 9.1
1529 PLASTICS AND Visual Appearance
potable hot and cold water distribution supplies Reaffirmed
PLASTIC PRODUCTS
MECHANICAL- IS 15778:2007 Cl 7.1.2
Chlorinated Polyvinyl Chloride (CPVC) Pipes for
1530 PLASTICS AND Wall Thickness Table-2 , IS 12235 (P-1) Cl
potable hot and cold water distribution supplies
PLASTIC PRODUCTS 5
MECHANICAL-
IS 4984: 2016 Cl 8.7, IS:
1531 PLASTICS AND Polyerthylene Pipes For Water Supply Density
13360 (P-3)/Sec-10)
PLASTIC PRODUCTS
MECHANICAL- Hydraulic Characteristics
IS: 4984- Cl 8.1 Table-5,,
1532 PLASTICS AND Polyerthylene Pipes For Water Supply ( Internal Pressure Creep
Annex-E Reaffirmed
PLASTIC PRODUCTS Rupture Test)
MECHANICAL-
Longitudinal Reversion IS: 4984::Cl 8.2 Annexure-
1533 PLASTICS AND Polyerthylene Pipes For Water Supply
Test F
PLASTIC PRODUCTS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 122 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
IS: 4984:Cl 7.4.1.1,
1534 PLASTICS AND Polyerthylene Pipes For Water Supply Mean Outside Diameter
Table-3
PLASTIC PRODUCTS
MECHANICAL-
IS 4984:2016 Cl 8.7, IS:
1535 PLASTICS AND Polyerthylene Pipes For Water Supply Melt Flow Index/Rate
2530:, Cl 7
PLASTIC PRODUCTS
MECHANICAL-
IS: 4984: Cl 7.4.1.2,
1536 PLASTICS AND Polyerthylene Pipes For Water Supply Ovality
Table-3
PLASTIC PRODUCTS
MECHANICAL-
1537 PLASTICS AND Polyerthylene Pipes For Water Supply Wall Thickness IS 4984:Cl 7.4.,Table-4
PLASTIC PRODUCTS
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and Resistance to Sulphuric IS 13592:2013 Cl 9 IS
1538 PLASTICS AND
outside buildings including ventilation and rain Acid 12235 ( P-7 ): Cl 2 to 4
PLASTIC PRODUCTS
water system
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and
1539 PLASTICS AND Diameter at any Point IS 12235 (P-1):, Cl 4
outside buildings including ventilation and rain
PLASTIC PRODUCTS
water system
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and IS 13592:2013 Cl 9, IS
1540 PLASTICS AND Mean Outside Diameter
outside buildings including ventilation and rain 12235 (P-1): Cl 3
PLASTIC PRODUCTS
water system
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and Resistance to external IS 13592:2013 Cl 10.1 ,IS
1541 PLASTICS AND
outside buildings including ventilation and rain blows 12235 (P9) Cl 4,5,7,8 & 9
PLASTIC PRODUCTS
water system
IS 13592:2013 Cl 8.2 , IS
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL- 12235 (P-5/Sec-1 and 2) :
Soil and Waste Dicharge System for inside and
1542 PLASTICS AND Reversion Test Cl of Sec-1 2.2, 4, and
outside buildings including ventilation and rain
PLASTIC PRODUCTS 5:and for Sec-2, Cl 3
water system
Table-2
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and IS 12235 (P-6): Cl 3, 5 and
1543 PLASTICS AND Stress Relief Test
outside buildings including ventilation and rain 6
PLASTIC PRODUCTS
water system

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 123 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

Un Plasticised Polyvinyl Chloride (PVC-U) pipes for

MECHANICAL-
Soil and Waste Dicharge System for inside and IS 13592:2013 Cl 10.2 ,IS
1544 PLASTICS AND Tensile Strength
outside buildings including ventilation and rain 12235 ( P-13) : Cl 3 to 8 )
PLASTIC PRODUCTS
water system
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and Vicat Softening IS 13592:2013 Cl 8.4, IS
1545 PLASTICS AND
outside buildings including ventilation and rain Temperature 12235 (P-2): Cl 3,4,5
PLASTIC PRODUCTS
water system
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and
1546 PLASTICS AND Visual Appearance IS 13592:, Cl 8.1
outside buildings including ventilation and rain
PLASTIC PRODUCTS
water system
Un Plasticised Polyvinyl Chloride (PVC-U) pipes for
MECHANICAL-
Soil and Waste Dicharge System for inside and IS 13592:2013 Cl 7.1, IS
1547 PLASTICS AND Wall Thickness
outside buildings including ventilation and rain 12235 (P-1) : Cl 5
PLASTIC PRODUCTS
water system
MECHANICAL-
IS 4985:2021 Cl 10.6 IS
1548 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies Density
12235 (P-14) : Cl 5,6,7,8
PLASTIC PRODUCTS
MECHANICAL- IS 4985:2021 Cl 7.1.1.2,
1549 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies Diameter at any Point Table-1 &2 ,IS 12235 (
PLASTIC PRODUCTS P-1): Cl 4
MECHANICAL- IS 4985:2021 Cl 11.1,
1550 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies Hydrostatic Pressure Table 6 ,IS 12235 (
PLASTIC PRODUCTS P-8/Sec-1) : Cl 3 to 8
MECHANICAL- IS 4985:2021 Cl 7.1.1.2,
1551 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies Mean Outside Diameter Table-1 & 2, IS 12235
PLASTIC PRODUCTS (P-1) , Cl 3
MECHANICAL-
Resistance to external IS 4985:Cl 11.2,Annexure-
1552 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies
blows C
PLASTIC PRODUCTS
MECHANICAL-
Vicat Softening IS 4985:2021 Cl 10.5 IS
1553 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies
Temperature 12235 ( P-2 ):Cl 3,4,5
PLASTIC PRODUCTS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 124 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL-
1554 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies Visual Appearance IS 4985, Cl 10.1
PLASTIC PRODUCTS
MECHANICAL- IS 4985:2021 Cl 7.1.2,
1555 PLASTICS AND Un Plasticised PVC Pipes for Water Supplies Wall Thickness Table-1 & 2 , IS 12235 (
PLASTIC PRODUCTS P-1): Cl 5
MECHANICAL- SOIL
1556 Soil CBR IS 2720 ( P-16 ) Cl 3 to 8
AND ROCK
MECHANICAL- SOIL Heavy Compaction ( MDD
1557 Soil IS 2720 ( P-8 ) Cl 3 to 7
AND ROCK )
MECHANICAL- SOIL Heavy Compaction ( OMC
1558 Soil IS 2720 ( P-8 ) , Cl 3 to 7
AND ROCK )
MECHANICAL- SOIL
1559 Soil Light Compaction ( MDD ) IS 2720 ( P-7), Cl. 3 to 7
AND ROCK
MECHANICAL- SOIL
1560 Soil Light Compaction ( OMC ) IS 2720 (P-7) Cl 3 to 7
AND ROCK
MECHANICAL- SOIL
1561 Soil Liquid Limit IS 2720 ( P-5 ) Cl 6
AND ROCK
MECHANICAL- SOIL
1562 Soil Plastic Limit IS 2720 ( P-5 ) Cl 7
AND ROCK
MECHANICAL- SOIL
1563 Soil Plasticity Index S 2720 (P-5) , Cl 8
AND ROCK
MECHANICAL- WOOD
Block Boards of BWP and MR Grade, Commercial IS 1659 ,Cl 9 and 9.2.3,
1564 AND WOOD Glue Adhesion
and Decorative Type Annexure-G
PRODUCTS
MECHANICAL- WOOD
Block Boards of BWP and MR Grade, Commercial IS 1659 , Cl 9 and 9.2.4,
1565 AND WOOD Mycological Test,
and Decorative Type Annexure-H,
PRODUCTS
MECHANICAL- WOOD
Block Boards of BWP and MR Grade, Commercial IS 1659 Cl 9, 9.2.2
1566 AND WOOD Resistance To Water
and Decorative Type Amendment-F,
PRODUCTS
MECHANICAL- WOOD
Plywood For General Purposes, BWR and MR Glue Adhesion (Water IS 303:1989 , Cl 11.2, IS
1567 AND WOOD
Grade Resistance Test) 1734 (P-5) :Cl 3 to 6
PRODUCTS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 125 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

MECHANICAL- WOOD
Plywood For General Purposes, BWR and MR IS 303:1989 , Cl 11.3 IS
1568 AND WOOD Moisture Content
Grade 1734 (P-1):Cl 3 to 6 ,
PRODUCTS
MECHANICAL- WOOD
Plywood For General Purposes, BWR and MR IS 303:1989 , Cl 11.2.2 IS
1569 AND WOOD Mycological Test
Grade 1734 (P-5 & 7):Cl 3 to 6
PRODUCTS
MECHANICAL- WOOD
1570 AND WOOD Wood Any Specie Density 1708 (P-2), Cl 2 to 4
PRODUCTS
MECHANICAL- WOOD
1571 AND WOOD Wood Any Specie Moisture Content IS 1708 (P-1) :Cl 2 to 4,
PRODUCTS
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type),
IS 2202(P-1):1999, Cl
1572 AND WOOD Plywood Face pannels, Decorative and Non Dimension - Squareness
5.1,IS 4020 ( P-2 ) Cl 2.4
PRODUCTS Decorative
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type), IS 2202 (P-1):1999, Cl 5.1,
1573 AND WOOD Plywood Face pannels, Decorative and Non Dimension- Height Table-2, IS 4020 ( P-2 ) Cl
PRODUCTS Decorative 2.1
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type), IS 2202(P-1):1999, Cl
1574 AND WOOD Plywood Face pannels, Decorative and Non Dimension Thickness 5.2,Table-3 , IS 4020 (P-2)
PRODUCTS Decorative Cl 2.3
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type), IS 2202 (P-1):1999, Cl
1575 AND WOOD Plywood Face pannels, Decorative and Non Dimension- Width 5.1,Table-2 , IS 4020 ( P-2
PRODUCTS Decorative ) Cl 2.2
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type), IS 2202(P-1):1999, Cl
1576 AND WOOD Plywood Face pannels, Decorative and Non End Immersion Test 11.12 , IS 4020 ( P-13 ) ,Cl
PRODUCTS Decorative 2
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type), IS 2202(P-1):1999,Cl
1577 AND WOOD Plywood Face pannels, Decorative and Non Glue Adhesion Test 11.14 IS 4020 ( P-15 ) ,Cl
PRODUCTS Decorative 2
MECHANICAL- WOOD Wooden Flush Door Shutters (Solid Core Type), IS 2202 (P-1):1999, Cl
1578 AND WOOD Plywood Face pannels, Decorative and Non Knife Test 11.13 , IS 4020 ( P-14 ) C;
PRODUCTS Decorative 2&3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 GHAZIABAD TESTING LABORATORIES PVT. LTD., AO 150, AMRIT STEEL COMPOUND , SOUTH SIDE GT
Laboratory Name :
ROAD INDUSTRIAL AREA, GHAZIABAD, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11707 Page No 126 of 126
Validity 29/05/2023 to 28/05/2025 Last Amended on 29/11/2024

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used

NON-DESTRUCTIVE-
BUILDING MATERIALS
IS 516 (P-5/Sec-1, Cl 2.2,
1579 - REINFORCED Hardened Concrete Ultrasonic Pulse Velocity
2.3, 2.4, 2.5)
CONCRETE
STRUCTURES
NON-DESTRUCTIVE-
BUILDING MATERIALS
IS 516 (P-5/Sec-4) Cl
1580 - REINFORCED Hardened Concrete Rebound Hammer
4,5,6,7,8
CONCRETE
STRUCTURES

NOTE- The Laboratory has demonstrated competence for the stated scope for WATER. This however does not fully cover the
specification requirements of BIS for the Packaged Drinking Water as per IS 14543 and the Packaged Natural Mineral Water
IS 13428.

This is annexure to 'Certificate of Accreditation' and does not require any signature.