Version 2022.2.

1
February 2023

Release notes
Copyright notice
Copyright © 2022 Schlumberger. All rights reserved.

This work contains the confidential and proprietary trade secrets of Schlumberger and may not be copied or stored in an information
retrieval system, transferred, used, distributed, translated or retransmitted in any form or by any means, electronic or mechanical, in
whole or in part, without the express written permission of the copyright owner.

Trademarks & service marks

Schlumberger, the Schlumberger logotype, and other words or symbols used to identify the products and services described herein
are either trademarks, trade names or service marks of Schlumberger and its licensors or are the property of their respective owners.
These marks may not be copied, imitated or used, in whole or in part, without the express prior written permission of Schlumberger.
In addition, covers, page headers, custom graphics, icons, and other design elements may be service marks, trademarks, and/or
trade dress of Schlumberger, and may not be copied, imitated, or used, in whole or in part, without the express prior written
permission of Schlumberger. Other company, product, and service names are the properties of their respective owners.

An asterisk (*) is used throughout this document to designate a mark of Schlumberger.

Security notice
The software described herein is configured to operate with at least the minimum specifications set out by Schlumberger. You are
advised that such minimum specifications are merely recommendations and not intended to be limiting to configurations that may be
used to operate the software. Similarly, you are advised that the software should be operated in a secure environment whether such
software is operated across a network, on a single system and/or on a plurality of systems. It is up to you to configure and maintain
your networks and/or system(s) in a secure manner. If you have further questions as to recommendations regarding recommended
specifications or security, please feel free to contact your local Schlumberger representative.

Schlumberger private – Customer use

Contents

Techlog wellbore software platform 2022 release notes.............................................. 7

Techlog environment .................................................................................................. 8
Operating systems ................................................................................................................................................8
Reminder: Schlumberger license server was upgraded in 2021.2 ........................................................................8
System requirements ............................................................................................................................................8
Printers ..................................................................................................................................................................9
Working with Techlog projects .............................................................................................................................9
What's new in the 2022.2 .......................................................................................... 10
General ................................................................................................................................................................10
Zonation UX improvement ..................................................................................................................................10
Tips and tricks .....................................................................................................................................................10
New interface for Pickett plot (Technology preview) .........................................................................................11
Python .................................................................................................................................................................11
Studio ..................................................................................................................................................................12
Licenses (2022.2.1)..............................................................................................................................................12
Domains ..............................................................................................................................................................12
Petrophysics – Quanti.Elan .................................................................................................................................12
Petrophysics - 3D Petrophysics ...........................................................................................................................12
Petrophysics – Nuclear Magnetic Resonance .....................................................................................................13
Petrophysics – Thin Bed Analysis ........................................................................................................................13
Petrophysics – Environmental Corrections .........................................................................................................13
Geomechanics – Stress inversion ........................................................................................................................13
Geomechanics – Stochastic wellbore stability ....................................................................................................13
What's new in the 2022.1 .......................................................................................... 14
General ................................................................................................................................................................14
Annotations.........................................................................................................................................................14
Qt ........................................................................................................................................................................14
3D plots for ‘basic’ subscriptions (Delfi only) ......................................................................................................14
Python .................................................................................................................................................................14
Studio ..................................................................................................................................................................14
Domains ..............................................................................................................................................................15
Rock physics ........................................................................................................................................................15
Petrophysics – Quanti.Elan .................................................................................................................................15
Petrophysics - 3D Petrophysics ...........................................................................................................................15
Petrophysics – Nuclear Magnetic Resonance .....................................................................................................16
Petrophysics – Environmental corrections .........................................................................................................16
Bug fixes in 2022.2.1 .............................................................................................. 17
Bug fixes in 2022.2 .................................................................................................... 18
Bug fixes in 2022.1 .................................................................................................... 23
Bug fixes in 2022.1.1 ................................................................................................. 26
Bug fixes in 2022.1.2 ................................................................................................. 27

5
Schlumberger private – Customer use
6
Schlumberger private – Customer use
 Techlog 2022.2.1

Techlog wellbore software platform 2022 release

notes
The Techlog wellbore software platform delivers an industry leading desktop solution that
provides petrophysicists, geoscientists and engineers with a fully integrated, interactive, easy to
use analysis tool for interpretation of all wellbore data types (core, logs, images, photos, and so
on). Using Techlog software, these different disciplines can collaborate effectively by accessing
and incorporating the same data into their workflows, helping you to fully capitalizing on previous
data investments.
Details of improvements and additions can be found in the following pages.
The Techlog team
 Techlog 2022.2.1

Techlog environment

Operating systems
Techlog is supported on the following 64-bit architectures workstations:
• Microsoft® Windows 11.
• Microsoft® Windows 10.
• Microsoft® Windows Server® 2012 R2 (64-bit).
• Microsoft® Windows Server® 2016 (64-bit).
Note: Techlog 2021 does not support Microsoft Windows 7 and 8.

Reminder: Schlumberger license server was upgraded in 2021.2

To enable Techlog 2021.2 (and newer versions) and the Schlumberger licensing tool to correctly
set the licensing enviroment, please be aware of the following changes inside the licensing tool:
License file License server License file + license server
(only) (only) (at the same time)
For the license file you must manually
add a free port. You can use Flexnet
No changes. You can leave the port ports: 27000 – 27009, that is,
No changes. You will need to manually 27000@localhost. The “Automatic”
number to: “Automatic” (that is,
set the license server (that is option is not longer valid.
@localhost) or to manually set a port
[email protected]).
number (that is, 27000@localhost). For the lincese server you must
manually set the license server, that is
[email protected].

System requirements
Configuration Minimum Recommended
Operating
Windows 10 (64-bit)
System
Multi-core processor (best with a fast clock speed and Quad-core processor (best with a fast clock speed and high
Processor
high cache) cache)
Memory 16 GB 32 GB
Display Single display 1280 x 1024 pixels Dual display with 1920 x 1200 pixels.
Graphic card NVIDIA Quadro® mid-range card with latest driver version 461.09 or above
Network 100 Mbps 1 Gbps
Disk Storage Hard-Disk Drive (HDD) – 7200 rpm Solid State Drive (SSD)

Note: Techlog can work on 4k and High DPI screen resolution but it is not fully supported.
PTS only: 3D plots are now working in Techlog 2022.1 susbscriptions with no GPU, we still
recommend the use of GPU to gain on performance in local installations.
 Techlog 2022.2.1

Printers
• HP DesignJet (1055CM).
• Epson Stylus Pro.
• Printrex.
• Iterra.
• Standard A4, Letter printers (HP CLJ 3700/4730).

Working with Techlog projects

We do not recommend that you work on a project when a synchronization is being performed
using the One Drive tool, as this can lead to project errors. Any backup tool must be set to perform
the backup at night. Techlog must be closed to avoid having two different tools accesing the
project at the same time.
You cannot move or copy a project when the project is open in Techlog.
Please zip any project (tlp plus associated folders) you want to move to a different location
especially on a network drive.
 Techlog 2022.2.1

What's new in the 2022.2

General
Zonation UX improvement

• Global zonation
o Zone description is now directly visible and editable in the dock window.
o You can now search and filter global zonation.
o Selecting zones now follows Windows default by using ctrl and shift.
o The color scheme of zone selection is improved.
o You can now save global zonation at other levels from the global zonation dock
window.
o There is now improved visibility on active and inactive zonation.
o Deleting the Global zonation now also deletes the zonation dataset.
o Any unused zones in global zonation are now in italics.
• Zone editor
o You can now open the Zone editor from the Global zonation dock window.
o The Zone editor now synchronizes with the Global zonation dock window and the
zonation name is displayed on the title bar.
o You can now drag the zonation dataset on zone editor.
o You can now right-click a zonation dataset to open it in the Zone editor.
o There are now intuitive screen messages in the Zone editor to help you to create
zones.
o The zonation dataset is now saved by contextual action in the Zone editor.
o An imported zonation dataset, if saved through the Zone editor, now also saves the
global zonation.
• Zonation in layout
o Global zonation can also be saved at different levels along with saving the dataset
from LogView.
o Forbidden sign (red circle) that prevent access to the edit have been removed from
a lot of scenarios. This enables a seemless user experience of zone creation
through LogView.
o Zone selection in the plot and LogView are now not lost if you apply or remove the
filter in the Project browser.

Tips and tricks

This new feature, aimed at new and intermediate users, will help you when using Techlog
workflows by highlighting handy tips and tricks.
• It is a new window, which can be docked, displayed, or hidden as required.
• It is contextual to a specific Techlog object (plot, method, and so on).
• It displays different contents for a category of method.
• It is linked to Techlog Help, so you can easily access extra information on a topic.
 Techlog 2022.2.1

Know issue: Blank screen on first time startup: Sometimes due to a mismatch between the
recommended windows resolution and the real resolution Tips and tricks, or the Techlog What’s
New screen is blank, or both. To solve the problem, use the Windows recommended resolution, or
close and re-start Techlog, or both.

New interface for Pickett plot (Technology preview)

The new Pickett-plot has the following features:

• Always on display template to drive the display.
• Easy variable selection from the Data list.
• Dynamic number of water saturation lines.
• Copy (Ctrl + C) equations from the plot’s legend.
• Parameters (a, m, n, and Rw) and display interaction in the plot.
• Graphical adjustment by three graphical points to control the a, m, n, and Rw parameters:
• The red point controls the displacement to all directions of all the Sw lines (Parameters a
and Rw).
• The blue point controls the angle of all the Sw lines (parameter m).
• The yellow point controls the separation between Sw lines (parameter n).
• Hide or display the Data management pane.
• Swap the mode for easy visualization between different wells.
• Undo (Ctrl + Z) and redo (Ctrl + Y) actions.
Note: This is a technology preview, this plot will be enhanced in coming releases to fulfill workflow
integartion with Quanti methods.

Python

API to access and manipulate AWI from Techlog or any python AWI. Using these APIs you can
access information about the different components of AWI and also change them. You can now:
• Manipulate inputs.
• Get the list of parameters.
• Easily access the parameters.
• Get the list of family, unit, and palettes in an AWI.
• Get the ids of LogView generated with AWI.
• Force the layout template mode.
• Define the position of the method in the workflow.
• Save and load workflows or templates.
API available to export Techlog data as .tlpx from (project, import buffer, export buffer, and trash).
New example scripts in the Advanced Tutorial section that shows tl class for automation (2022.2.1)
 Techlog 2022.2.1

Studio

• Rename data in the Repository browser: If you have the required permissions to the
repository, you can now right-click and select Rename to rename an object directly in Studio
via the Repository browser.
• Dip properties displayed in the Repository browser: Dip properties (Azimuth associated
variable, dip height associated variable, classification associated variable, and variable
associated for the quality) are now correctly displayed in the repository browser properties
pane.
• DLIS properties auto-trimmed on import: White space in DLIS properties is now
automatically trimmed during import in Techlog. This prevents character limitations when
sending data to Studio.

Licenses (2022.2.1)

• Update in License: Token-based licensing (License Lib 2023.1) - AppDelivery

Domains

Petrophysics – Quanti.Elan
• Control population of parameters by initialization method: The temperature, pressure and
salinity dependent parameters used by Quanti.Elan, are computed per depth by the
initialization method. Quanti.Elan enables automatic population of these parameters.You
can now control population of these parameters by right-click options on the parameter cell.
Through the option Do not populate from initializations, you desynchronize the parameter
from initialization results, so that the cell value does not change when initialization results
are updated. Through the option Populate from initializations, you synchronize the
parameter with initialization results, so that the cell value gets updated when initialization
results change.
This new functionality enables efficient building of models containing both the initialized
parameters and your customized parameters.
• Copy individual parameter values across Quanti.Elan models: You can now copy an
individual Quanti.Elan parameter value from a zone, to all zones for which a model has
been defined. In a multi well or dataset model, you can copy a Quanti.Elan parameter
value from a zone in a well, to similar zones of all the other wells.

Petrophysics - 3D Petrophysics
• Pixel Inversion Processing with Enhanced Resolution (PIPER) now available for SLB LWD
tools: The PIPER solution is now available for SLB LWD propagation resistivity logs. This
inversion corrects the logs for shoulder bed and dip effect and provides Rt in formations
with apparent dip of up to 70 degrees. It does not require a formation model defined
beforehand. PIPER is currently available to SLB customers, as a processing service only.
High angle well evaluation:
 Techlog 2022.2.1

• Undo in Local Layer Model: You can now undo the editions that you have performed on the
3DPH local layer model. This includes changes done on both layer geometry (boundary
positions, and dips) and layer log properties. You could also redo the actions which were
most recently undone.
• Visualization improvements: The DOI mask visualization and display settings have been
enhanced. This ensures alignment of the mask display with local layer model limits and also
enhances intuitiveness. Aditionally, the display of inversion and forward modeling progress
bars have been enhanced so they no longer are displayed behind other dialog boxes.

Petrophysics – Nuclear Magnetic Resonance

• 2D Map updates: You can now display stacked 2D maps over your desired depth interval.
This helps you to visualize an averaged map and NMR porosity value. You can also assign
display palettes and adjust their limits.

Petrophysics – Thin Bed Analysis

• LowRep develop end points method updates: The Hydrocarbon corrected outputs are now
assigned to consistent families. Additionally, the sand and shale points on the cross plots
are now connected by a line, for improved visualization & correlation.

Petrophysics – Environmental Corrections

• Update of adnVISION Density caliper method: The adnVISION Density caliper

environmental correction method now outputs two density caliper quality indicator arrays
for the OmniSphere DN tool. These arrays give indications of the reliability of the caliper
data around the borehole. Additionally, the method now outputs eight calipers, covering
360 degrees, which factor in photoelectric effect.

Geomechanics – Stress inversion

• Perform inversion of tectonic strains that do honor observations like closure pressure,
breakdown pressure, breakout width, among others: You can now interact with the
posterior plot and trigger the calculation of the wellbore stability to verify how the selected
solution looks in context with the observations.

Geomechanics – Stochastic wellbore stability

• Enhanced single depth calculation within Stochastic wellbore stability: Now there is the
ability to calculate sensitivities around diferent combinations of inclination and azimuth as
well as the default setting taken from the trajectory.
• Update of the Stochastic WBS plugin (2022.2.1).
 Techlog 2022.2.1

What's new in the 2022.1

General
Annotations

• Annotations in LogView now display reference in Date Time.

Qt

• The version of Qt used in Techlog has been updated to 5.15.2. If your plugins are
embedding additional Qt modules for customizing the interface, you must update Qt DLLs
to the same version as Techlog and regenerate your plugin.

3D plots for ‘basic’ subscriptions (Delfi only)

• You can now use 3D plots such as Wellbore Centric Grid, 3D Field viewer, 3D DTS, 3D cross-
plot single and multiwell, 3D Sammon projection and 3D Dendogram (IPSOM) with
subscription with no GPU.

Python

• The Python compiler has been upgraded from 3.6 to 3.9. The compiled python scripts (.pyc)
available in Techlog were recompiled with Python 3.9. If you have any compiled python
scripts (.pyc) being used, please recompile them with new compiler version.
• New API to access and manipulate AWI from Techlog or any python AWI. When using the
API, you will get information about the different components of AWI and you can also change
them. For the details please refer to the User Guide.

Studio

• Improvements to the Send and Retrieve All workflows to improve performance.

• The grouping behaviour has been aligned between Techlog and Studio. When data is
ungrouped in Techlog and updated in Studio, the group will also be removed in Studio and
the Repository browser.
• You can now successfully retrieve a dataset with a different length as a copy without an error
occurring.
• Importing a CRS from Well-Known text or file will now correctly set the Base GCRS name in
the UI.
 Techlog 2022.2.1

Domains
Rock physics

• New workflow of Advanced Rock Modeling (Technology Preview) has been introduced as
with an integrated approach to create rock physics models for determining elastic and
acoustic properties of rocks from petrophysical inputs, such as mineral volume fractions,
porosity, and fluid saturations, directly from interpretations performed using modules such
as Quanti and Quanti-Elan. The rock model workflow can be used both for single as well as
multi-well environment. The functionality also offers an optimization workflow which uses a
simulated annealing inversion algorithm to determine optimum rock model parameters to
propagate to nearby wells in the field.

Petrophysics – Quanti.Elan
• Use of shale resistivity by Dual water Elan equation: In Quanti.Elan, you can now use shale
resistivity (Rsh) , when working with the Dual Water Elan equation. When you choose that
dual water Elan uses the shale resistivity parameter, bound water conductivity is computed
for each clay from the input shale resistivity, and used in the computation accordingly.
• SW, SXO and SWE outputs from Quanti.Elan post processing: Quanti.Elan post processing
now outputs total water saturation in un-invaded and flushed zones. It also outputs
effective water saturation. The same equations as Quanti.Elan are used for computing
these new outputs.
• Quanti.Elan method property to opt for update of either wet or dry clay end points upon
update of wet clay porosity: Upon an update of wet clay porosity in Quanti.Elan, you can
now choose whether the wet or dry clay end points get updated. This is achieved through a
new method property. The default is the update of wet end points.

Petrophysics - 3D Petrophysics
High angle well evaluation:
• Tabular view in 3DPH Local Layer Model: You can now interact with the 3DPH local layer
model through the new tabular view. This window hosts the numerical representation of
the model. It provides an editable and interactive interface , which is in full
synchronization with the model. You can edit individual layer properties, fill up or down a
defined layer property to other layers, show or hide certain layer columns ; and copy the
table content to excel for subsequent use. These improve your 3DPH local layer model
workflow efficiency.

• Support of PeriScope Edge directional anisotropy and Z-measurement channels by Rv Rh

inversion: The Rv Rh inversion in Global Layer Model now accepts the PeriScope Edge
directional anisotropy and Z-measurement channels, as inputs. With the addition of these
new channels, the Rv Rh inversion could be run on any desired combination of PeriScope
Edge conventional resistivity and directional channels. This new capability enhances the
accuracy of inversion outputs, specially the inverted boundary positions and dips. The Rv
Rh inversion is currently available to Schlumberger customers, as a processing service
only.
 Techlog 2022.2.1

Petrophysics – Nuclear Magnetic Resonance

• Single-Depth 2D Map for Schlumberger NMR tools

Through the new NMR Single-depth 2D Map functionality, you are now able to visualize
the 2D maps, resulting from inversions run over Schlumberger MMR tools. The following
maps are supported:
o T1 relaxation time vs. T2 relaxation time (T1T2).
o Diffusion constant vs. T2 relaxation time (DCT2).
o Diffusion constant vs. T1 relaxation time (DCT1).

Petrophysics – Environmental corrections

• Update of ThruBit Spectral Gamma ray method: The ThruBit Spectral Gamma ray
environmental correction method now accepts GR counts spectrums as input, instead of
average elemental yields (which was the case in Techlog 2021.2). This is aimed at alignment
with the filed data acquisition platform (Maxwell). The method also now performs borehole
Potassium correction.
 Techlog 2022.2.1

Bug fixes in 2022.2.1

RTC: PDO - PCAD Mode

Dips: Deletion and display of dips
Low Rep : End points do not get propagated when working with multiple zones
Zonation: Zone disappears when saved using "save as" and then exit editing mode
Zonation: Creating zones in layout needs to be fixed for downward propagation
AIT Environmental Correction: No output generated when enabling "optimization" for mud
resistivity computation
Low Rep : End points do not get propagated when working with multiple zones
Low Rep : One model by zone functionality is off by default
Kmod: Crash while loading model
Family database: By default, always select the same properties
QElan: Fix model in QuantiElan for Qv for WaxmanSmits
Geomechanics: enable Amadei borehole stress solution for Stochastic wellbore stability
calculation with Geomechanics Insights.
Geomechanics: crash of Stress Inversion workflow when Zones are added was fixed.
 Techlog 2022.2.1

Bug fixes in 2022.2

Quanti.Elan combiner: Equation editor - equation input variable name cut upon re-opening the
equation editor.
Structural Dip Analysis: cannot continue to edit/add zones after run save
Structural Dip Analysis: Missing rotated dips in lowermost zone
Wrong display for LWD images in the certain orientation case
Pressing F1 on Dip meters window of log view opens an empty page
Pressing F1 on the Pad Concatenation window from LogView opens an empty page

Python methods in WBI: a Python license is required to open Geology python libraries
WBI - SandSpec: Method takes too long to run (30 minutes) and results are not the one expected
Dip Dataset Manipulation : still not working correctly
NORMALIZATION: refresh issue in display mode
Structural Dip Analysis - Family in output tab incorrect for many parameters
3D viewer crash when no GPU is available
3DPH - Crash when 'select input geometry object' in 'Load global geometry' dialog
3DPH - DOI Mask with 10ft outer radius covers less area than a 10-ft radius local layer model
3DPH - Erase sinusoid mode, then get 2DWT focus, then back in logview, horizontal line loses the
focus
3DPH - Loaded geometry not editable
3DPH - Memory leaks in 3DP Image strip
3DPV - Non-intuitive error message for geometry initialization
3DPV - Not able to change palette for a displayed image
3DPV - Property initialization is disabled if there is no uninvaded Rv or Rh but RMud
3DPV- Saving the session does not work
Add files to gitignore
Annotation: backward compatibility issue (2 object instead of 1)
Area Fill between two variables makes the variable management in properties greyed out for the
second variable
Bad header display for Pretest interpretation plot
Can't see all the zones in the global zonation dock window
Cannot draw trendlines for some projects
Quanti.Elan-Incomplete end points table
Clear the filter when opening a new Global zonation
 Techlog 2022.2.1

Color of zone is same as the adjacent zone when you hover next of a selected zone in global
zonation
Color of zones is lost after renaming of zone
Crash at project opening - from client
Crash when dropping several Zonation dataset
Delfi authentication fail when marshalling nullptr string
Density Wendt acoustic does not pick up the input details
Dip picking doesn't care about caliper unit
DLIS properties are not trimmed causing error when exporting to Studio
Error message not understandable and triggered at wrong time
Error message raised in the Techlog output console related to Studio!?
Error publishing a new Well with Data status=Complete
Export ToDlisPerWell - Python doesn't work
Fix Icon handling logic in the core Find module
Fix TL datalib url for non-prod environments
Forbidden sign when user changes the mouse focus from one zonation track to another
Fracture Stability menu is not under Shale Advisor suite tab
Petrophysic Log Streaming
Generic AWI - Workflow template does not load parameters if saving project parameters is not
enabled when saving the template
Ghost window appears instead of full working TL window
Header cannot correct show for Techlog 2020.1.3
Header Editor- The number of decimal places displayed in Header is too much
High memory allocation on Server during bulk retrieval
if statement as per the TL Guru Helpfile does not work
Import File - CSV will transpose table in Import Wizard
In None or English system, the default horizontal scale for DT is not good.
Incremental build pipeline fails on copy Slb.Techlog.Techdata.Witsml.RTCWrapper64.dll
IPSOM models crashes Techlog
Issue on Onboarded plugins documentation
Lithology patterns not visible in pdf file
Log viewer cannot be scrolled down anymore
Logview rosette track does not keep input information after saving the layout and reopen it
 Techlog 2022.2.1

New UCS and Friction angle computation displays the results in different template and the pre-
existing template vanishes
No Icon for Open in Zone Editor and no Well filter is applied
Null values still being displayed despite having a filter on cross plot
Hyperbolic tangent modelling
Overburden extrapolation method fails to update the control points interactively
PDO - Write back issue
Pore pressure Wizard - Two Fracture gradient methods on-line help display "Oops..."
Properties - Elastic properties - Parameter conflict with UCS method
Python AWI assigns wrong family
PythonAWI displayed wrong output family
Quanti.Elan cross plot - wet end point is editable when a variable is provided to the clay dry end
point
Quanti.Elan initializations: saved parameters not populated in a loaded WF template
Quanti.Elan: Loaded workflow containing variable WCLP - End points not loaded as they were
saved
Quanti.Elan: One model by zone - Use of a variable in one zone impacts results in other zones
Quianti.Elan Combiner probability
Quanti.Elan Combiner does not update the probability track of LogView once it is executed for
the second time without closing LogView
Quanti.Elan Combiner unable to display two or more custom minerals though the volume
fractions are correctly getting computed
Quanti.Elan combiner unable to handle mineral names added by 'Add a mineral/ fluid' feature
Quanti.Elan initializations: When running on multiple datasets, logview does not get populated
for all datasets
Quanti.Elan One model by zone option does not follow the order if multiple zones are added
Quanti.Elan workflow - permittivity family as input generated -9999 in Bound water permittivity
value
Quanti.Elan: Incorrect outputs for repeated zones when using one model by zone
Quanti.Elan: One model by zone: Local differences in results vs. using zonation ALL
Refresh issue for global zonation entity
Regression - Margin reduction while opening contextual menu
Renaming a global zonation switches the zonation selection in the dock window
Reset is done when changing inputs in Kmod
Sequence dip classification is missing in LogView
 Techlog 2022.2.1

What's new- Calculator plug-in

Stereonet plot - Display or Density : Icon disappearing when selecting the type
Strange display in Zone Editor
Structural Dip Analysis: dip rotated are not showing classification
Structural dip removal does not work. Rotated dips not displayed in TL 2021
Summaries: message "The thickness of the zone is not equal..." triggered too often
Summaries: Zonation all Gross not matching the sum of net + not net + unknow
Syncing for 2 zone editors in specific case when user selects the option Propagate to all windows
Techlog - Report Editor Object moves up when edited
Techlog crash at project opening 2 - from client
Techlog crashes when user tries to drag & drop just created zone in the Global Zonation dock
window
The first found Zonation dataset is opened after drag and drop a Well for already opened
Zonation
The mouse cursor flashes and not stop after Normalization[Techlog Preview] is created
The OVB extrapolation method can be stuck by some wrong parameters and auto method won't
resolve the problem
Titles in menu dissappears when I tear off the menu
Token auth not working on delfi
Trendline sections are not deleted
Missing family assignment rule - SHMIN_EMW and SHMAX_EMW
Anisotropic_Geomechanics: Default workflows
Unable to import Data in TL debug (crash in python in debug)
Variable property windows in layout with area fill
Wbi Crash - Image Processing wizzard when canceling the save of plots
When you save the zonation as from logview it is saved in all the datasets and also not saved in
the correct level
Wrong family assignment in Structural Analysis module
Wrong family assignments for Unconventional > Anisotropic properties > Poisson Ratio - linear
law
Wrong scale in headers of Dips
Techlog crash after opening up 3D crossplot single well/multiwell
Zonation dataset disappears from zone editor
Zonation edited from a logview should be displayed with an asterisk in the Global zonation dock
window
 Techlog 2022.2.1

Zone Editor shall not allow same Zonation being created

 Techlog 2022.2.1

Bug fixes in 2022.1

If Zones are created from interactive selection then editing of those zones are not possible
CRASH in Kmod
CRASH Moving dips
Techlog Quanti.Elan doesn't open saved workflow template correctly
Whatsnew not opening on 2022.1
Crash when delfi connection failed
Faulty visualization of partial dips / breakouts / induced fractures on TOH oriented images
DIPS: Main parameters are not longer associated...
3DDTS plugin fails to open
No risk and event display
DLIS export swaps properties
Quanti.Elan : Model created for a dataset which misses selected inputs
Mechanical properties - Parameter conflict between YME and UCS methods
Borehole Shape does not display in normal mode
HRA Tagging - Wrong family assigned to HRA_Tagged output
Normalization - Graphical method is not working anymore
Family assignment was not correct after Data preparation
AWI Workflow template issue
Ocean graphics scene backward, forward, behind functions don't work
Lithology loader disarrange original mineral sequence
Annotations: reference of pointer tails do not update reference when is change in the
logview
Techlog crashes when saving the smooth curves
Changing color during Python execution crashes Techlog
Acoustic Data Preparation - TKO_SFA, COHPR and WF_FAST/SLOW channels from MW are
not copied to prepared dataset
Duplicate + sorting activated not working for box plot
Global zonation still appears after deletion of zonation dataset and global zonation from
project browser
Crash when pressing F7 multiple times quickly in python editor
TL crash when running the WBI/Wizard processing chain
P33 issue in Dip Feature Counting (DFC)
Monte Carlo Summaries expects Reference in feet
Slowness in logview when area fill with zones
Quanti.Elan : wet clay porosity only correctly populated if initialization is run twice
Quanti.Elan:NPHU Equation : Unit of salinity parameter not taken into account
 Techlog 2022.2.1

Summaries: Default flag setting changed!

Quanti.Elan initializations : null values change to zero upon double clicking on the concerned
cells--> wrong computations
Quanti.Elan :variables in constant tool are not taken into account when working with
multiple zones (one model by zone)
BGGM: config file is calling a non-updated .dat
Cannot edit variable from restored logview
Python editor - Async_remote problem
Quanti.Elan : Canadian unit system: The computed WCLP from initializations is high
In PTS 2.0 when Techlog reboot after a crash is not anymore detected as an active app
Parameters picking: + and - mode refresh issue
Quanti.Elan- Incomplete end point table when saving a rock model
Ocean autostart activities not starting on plugin activation
Python scripts not working on PTS (neither editor nor AWI)
Harmonization AWI 4: Open plots with a missing variable
Wrong Family assignment rule for USC-OSDD
Update TVD computation documentation
TVD- Index in True North should display X and Y as well
Lines not displayed in xplot or AA xplot
Quanti.Elan Combiner – Method does not run when loading specific equations
Parameters not preserved while using workflow template
Annotations: text fomat isn't applied during edition
Cannot resize annotation in a xplot
Duplicated keyboard shortcuts
conflict when using service running on port 8080
BUG_cropped display of the calculator interface
Techlog crashes when closing a Python AWI method while it is opening
Issues with printing unsaved Annotations
Python in AWI: New label column breaks dependency function, parameterDict updates
Annotations: selected annotations are not displayed when "display type" is none
Techlog64 2021.2 - MD reference increment is NOT regular related to the data import
Query in batch fix project name
Blacklisted files are included in installer anyway
Dependencies do not work if the dependency function raises a system exit
FuildMixing Method - default units in description leads to confusion
Xplot reference annotation issues
Crossplot duplicate not really working
Pressing F1 on the Pad Concatenation window from LogView opens an empty page
Depth Shift Crash when apply table
If Zones are created from interactive selection then editing of those zones are not possible
 Techlog 2022.2.1

Normalization: error message is not clear

Dip Dataset Manipulation : still not working correctly
Crash on "filter search" when opening a logview template Crash on "filter search" when
opening a logview template
NORMALIZATION: refresh issue in display mode
Structural dip removal does not work. Rotated dips not displayed
Wrong display for LWD images in the certain orientation case
 Techlog 2022.2.1

Bug fixes in 2022.1.1

Quanti.Elan initializations: When running on multiple datasets, logview does not get
populated for all datasets
Too many times same warning about python AWI loading 3DP
Missing Dips when running PIPER with a reference in meters.
Fix a crash in Pickett plotFix a crash in star plot
Fix a crash in box plot
Fix a crash in ProSource Front Office
Fix a crash in header editor
Fix a crash in Structural dip removal
 Techlog 2022.2.1

Bug fixes in 2022.1.2

Text variable in LogView in TL 2021.2