Fortinet
FCP_FAZ_AD-7.4 Exam
Fortinet Network Security Expert
Questions & Answers
(Demo Version - Limited Content)
Thank you for Downloading FCP_FAZ_AD-7.4 exam PDF Demo
Get Full File:
https://www.certsland.com/fcp-faz-ad-7-4-dumps/
www.certsland.com
Questions & Answers PDF Page 2
Version:6.1
Question: 1
Which two statements regarding ADOM modes are true? (Choose two.)
A. In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advanced
mode, the disk quota of the ADOM is flexible.
B. You can change ADOM modes only through the CLI.
C. In an advanced mode ADOM, you can assign FortiGate VDOMs from a single FortiGate device to
multiple FortiAnalyzer ADOMs.
D. Normal mode is the default ADOM mode.
Answer: C, D
Explanation:
Question: 2
What is the purpose of the FortiAnalyzer command diagnose system print netstat?
A. It provides network statistics for active connections, including the protocols, IP addresses, and
connection states.
www.certsland.com
Questions & Answers PDF Page 3
B. It provides the complete routing table, including directly connected routes.
C. It provides the static DNS table, including the host names and their expiration timers.
D. It provides NTP server information, including server IPs. stratum, poll time, and latency.
Answer: A
Explanation:
The diagnose system print netstat command in FortiAnalyzer provides detailed information on active
network connections, similar to the netstat command found in many operating systems.
Question: 3
Refer to the exhibit.
www.certsland.com
Questions & Answers PDF Page 4
The exhibit shows the creation of a new administrator on FortiAnalyzer.
What are two effects of enabling the choice Match all users on remote server when configuring a
new administrator? (Choose two.)
A. It allows user accounts in the LDAP server to use two-factor authentication.
B. It creates a wildcard administrator using an LDAP server.
C. User Remote-Admin from the LDAP server will be able to log in to FortiAnalyzer at any time.
D. Administrators can log in to FortiAnalyzer using their credentials on the remote LDAP server.
Answer: B, D
Explanation:
Enabling this option allows any user authenticated by the LDAP server to log in to FortiAnalyzer,
effectively creating a wildcard administrator.
Question: 4
The connection status of a new device on FortiAnalyzer is listed as Unauthorized.
What does that status mean?
A. It is a device whose registration has not yet been accepted in FortiAnalvzer.
B. It is a device that has not yet been assigned an ADOM.
C. It is a device that is waiting for you to configure a pre-shared key.
www.certsland.com
Questions & Answers PDF Page 5
D. It is a device that FortiAnalvzer does not support.
Answer: A
Explanation:
The "Unauthorized" status indicates that the device has been discovered or attempted to connect
but has not yet been authorized for management by FortiAnalyzer. It requires an administrator to
approve or authorize the device before it can be fully managed.
Question: 5
Refer to the exhibit.
www.certsland.com
Questions & Answers PDF Page 6
Which image corresponds to the packet capture shown in the exhibit?
A)
B)
C)
www.certsland.com
Questions & Answers PDF Page 7
D)
A. Option A
B. Option B
C. Option C
D. Option D
Answer: A
Explanation:
Chosen image shows the device Remote-FortiGate with the IP 10.200.3.1 and a connection status of
"Connection Up," which is consistent with the packet capture details showing active communication
between the client and server.
Question: 6
Refer to the exhibit.
www.certsland.com
Questions & Answers PDF Page 8
What is the purpose of configuring FortiAnalyzer with the settings displayed in the image?
A. To increase reliability
B. To expand bandwidth
C. To maximize resiliency
D. To improve security
Answer: D
Explanation:
The settings displayed in the image show the creation of a VLAN interface on FortiAnalyzer. The VLAN
ID is set to 100, and it is associated with port 5.
The purpose of configuring a VLAN interface like this is generally: To improve security.
By creating a VLAN, traffic can be segmented into isolated networks, which helps limit access and
enhances security by reducing the broadcast domain and keeping different types of traffic (e.g.,
management, user, and data traffic) separate.
Question: 7
www.certsland.com
Questions & Answers PDF Page 9
What are ofline logs on FortiAnalyzer?
A. Compressed logs, also known as archive logs
B. Logs that are indexed and stored in the SQL database
C. Any logs collected from ofline devices after they boot up
D. Real-time logs that are not yet indexed
Answer: A
Explanation:
Archive logs: When a real-time log file in Archive has been completely inserted, that file is
compressed and considered to be ofline."
https://docs.fortinet.com/document/fortianalyzer/7.4.3/administration-guide/381919/logs
Question: 8
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
A. Logs from registered devices
B. Database snapshot
C. Report information
D. System information
Answer: C, D
Explanation:
www.certsland.com
Questions & Answers PDF Page 10
A FortiAnalyzer system backup includes configurations, report settings, and system information, but
it does not include logs from registered devices or database snapshots. Logs are stored separately
and are not part of the system configuration backup.
Question: 9
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
A. FortiAnalyzer1 and FortiAnalyzer3
www.certsland.com
Questions & Answers PDF Page 11
B. All devices listed can be members.
C. FortiAnalyzer1 and FortiAnalyzer2
D. FortiAnalyzer2 and FortiAnalyzer3
Answer: C
Explanation:
Based on the partial configuration output, the primary factor for determining which devices can be
members of a FortiAnalyzer Fabric is the log-mode setting. Devices with the same log mode can be
part of the same FortiAnalyzer Fabric.
FortiAnalyzer1: Log mode is set to collector.
FortiAnalyzer2: Log mode is set to collector.
FortiAnalyzer3: Log mode is set to analyzer.
Devices with the same log mode can be part of the same fabric. Since FortiAnalyzer1 and
FortiAnalyzer2 both have their log modes set to collector, they can be members of a FortiAnalyzer
Fabric.
Therefore, the correct answer is FortiAnalyzer1 and FortiAnalyzer2.
Question: 10
You finished registering a FortiGate device. After traffic starts to flow through FortiGate, you notice
that only some of the logs expected are being received on FortiAnalyzer.
What could be the reason for the logs not arriving on FortiAnalyzer?
A. FortiGate was added to the wrong ADOM type.
B. This FortiGate model is not fully supported.
C. FortiGate does not have logging configured correctly.
www.certsland.com
Questions & Answers PDF Page 12
D. This FortiGate is part of an HA cluster but it is the secondary device.
Answer: C
Explanation:
This issue can occur if FortiGate is not properly configured to send logs to FortiAnalyzer, such as
incorrect logging settings or filters being applied that prevent certain logs from being sent. It's
important to verify that logging is enabled on FortiGate and that the correct log settings (such as log
severity or log type) are configured for transmission to FortiAnalyzer.
www.certsland.com
Thank You for trying FCP_FAZ_AD-7.4 PDF Demo
https://www.certsland.com/fcp-faz-ad-7-4-dumps/
Start Your FCP_FAZ_AD-7.4 Preparation
[Limited Time Offer] Use Coupon " SAVE20 " for extra 20%
discount on the purchase of PDF file. Test your
FCP_FAZ_AD-7.4 preparation with actual exam questions
www.certsland.com
