0% found this document useful (0 votes)
734 views59 pages

SikaTop 550 Seal (Formerly MasterSeal 550) - Technical Submittal

The document provides a technical summary of SikaTop® 550 Seal, an acrylic reinforced cementitious waterproof coating, along with information about Master Builders Solutions, their commitment to sustainable construction, and their extensive range of construction chemical products. It includes details on company profiles, ISO certifications, product offerings, and various construction challenges addressed by their solutions. Additionally, it highlights the company's global presence and historical innovations in the construction chemicals industry.

Uploaded by

tekigayathri1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
734 views59 pages

SikaTop 550 Seal (Formerly MasterSeal 550) - Technical Submittal

The document provides a technical summary of SikaTop® 550 Seal, an acrylic reinforced cementitious waterproof coating, along with information about Master Builders Solutions, their commitment to sustainable construction, and their extensive range of construction chemical products. It includes details on company profiles, ISO certifications, product offerings, and various construction challenges addressed by their solutions. Additionally, it highlights the company's global presence and historical innovations in the construction chemicals industry.

Uploaded by

tekigayathri1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 59

Product Submittal

SikaTop® 550 Seal (Formerly MasterSeal® 550)


Acrylic reinforced cementitious, flexible waterproof coating
Contents

This Technical Summary Consists copies of …..

1. Company Profile

2. ISO Certificate

3. Technical Data Sheet

4. Method Statement

5. Material Safety Data Sheets

6. Test Reports

7. Approvals
Company Profile
(CP)
Master Builders Solutions

About Master Builders Solutions


At Master Builders Solutions, We build sustainable
performance for a sustainable future. We combine
economic success with environmental protection and
social responsibility. We are available in 70 countries
where we promoting customer focus, efficient
structures, and fast-decision making.
MBCC Group work on contributing to the success of
our customers in the construction industry around the
globe.
Our portfolio focusses on Concreate Admixtures
Systems and Construction Chemicals Systems

www.master-builders-solutions.sa
www.mbcc-group.com

About Saudi Master Builders Solutions


Saudi Master Builders Solutions has been manufacturing its Construction and Admixture System Solutions
in Kingdom since 2001. These internationally proven, innovative technologies, are supported by global
R&D centers in Germany, USA, China, Japan and the UAE,. They are renowned for their robust, reliable
technical performance even in harsh climatic conditions. Our strong team of sales engineers and chemists
have gained the trust of clients and contractors on many of the Kingdom’s most iconic projects, fulfilling our
mission to help our customers overcome their construction challenges.

Vision We build sustainable performance


Mission become “The best Construction Chemicals Company in the world”

Where to find us…

For further information


www.master-builders-solutions.com/en-sa
[email protected]
Master Builders Solutions

Master Builders Solutions for Sustainable


Construction
The construction industry consumes about half of the
world's energy and natural resources. This can be
reduced, if you use the right chemistry.
For over 100 years Master Builders Solutions have
made construction more environment-friendly, faster
and safer. As a result of our innovative global
technologies, as well as our in-depth knowledge of
local building needs, structures and buildings are
more durable, consume less energy and produce less
CO2 during construction and use.

The Construction Chemicals range sold under the Master Builders Solutions brand are split into two
Strategic Business Units: Admixture Systems consisting of Concrete Admixtures, Cement Additives,
Underground Construction Systems, Curing Compounds, and Mold Release Agents, and Construction
Systems including Concrete Repair, Concrete Protection, Performance Flooring Systems, Performance
Grouts, Sealants, Tile Fixing Systems, Waterproofing Systems, Wall Systems, Wabo Expansion Joints,
Fire Protection, Chemical Anchoring, and Parking Accessories.
Globally, the MBCC Group of the construction chemicals division employs > 7,000 knowledge experts,
and is committed to connecting our contractor, consultant and client customers to the very best
solutions to help them overcome their construction challenges. We operate production sites and sales
centers in more than 70 countries.
Master Builders Solutions

Research and development drives sustainable


solutions
Trostberg , DE (Research,
Cementitious/Admixtures/Specialty)
Trostberg, DE (Global Development,
Admixture/Cementitious)
Augsburg, DE (Cementitious and
Dispersions)
Treviso, IT (Admixtures)

Beechwood, OH
(Admixtures/Cementitious Chigasaki
Dammam (Saudi Arabia (Admixtures)

Shakopee, MN Admixtures/ Cementitous Shanghai


(Resins) /Resins) (Admixtures/Resins/Cem
Dubai entitious)
(E-EB/O, Admixtures/
Cementitous /Resins)

For more than 100 years Master Builders Solutions have been supporting sustainable
construction through a strong commitment to research and development at the global,
regional and local level.

We innovate to create value throughout the life


cycle of buildings:
Construction phase:
Higher productivity, faster progress, lower overall
costs, lower consumption of natural resources,
better energy efficiency, improved health protection
& safety

Use phase:
Extended service life, lower life cycle and
maintenance costs, lower energy usage, better
performance and functionality, higher safety &
comfort

Technical Services Team

Master Builders Solutions has a local Technical


Services Team that provides technical expertise and
recommendations throughout the different project
stages. They reduce the occurrence of application
failure thus allowing our customers to meet their
project deadlines. They also conduct applicator
trainings both on site and at our Master Builders
Solutions Training Center
Master Builders Solutions

Over 100 years of innovation


Since our foundation in Cleveland U.S.A. in 1909 the Master Builders name has been synonymous with
innovation in the field of construction chemicals. Many of these innovations have fundamentally changed
construction practices, while reducing, cost increasing speed, and safety, improving durability and the
long-term sustainability of the industry. The timeline below highlights just some of these technical
milestones

1909 1923 1932 1954


Master Builders, 70000m² Iron Pozzolith first commercial Masterflow 648
Inc. founded in armored floor laid use of admixtures in world‘s first epoxy
Cleveland for Ford Motor Co 3000000m3 Hoover dam resin grout

1911 1927 1941 1968


first Masterplate Embeco world‘s Micro Air world‘s Ucrete the world‘s first
iron armored first expanding first synthetic air polyurethane concrete
floor cement grout entrainer floor, patented by ICI.

1973 1980‘s 1991 1994


Rheobuild 2nd First acrylic based Rheocrete 222+ first Meyco SA first alkali
generation super 3rd generation super organic corrosion free accelerators for
plasticisers plasticisers inhibiting admixture shotcrete

1968 1981 1986 1994


Melment world‘s 1st PCI Flexmoertel Masterflow 928 / 713 Space Shuttle
superplasticiser first flexibilised chemical expansion Endeavour: first
launched by SKW tile adhesive grouts introduced and only concrete
made in space

1997 2006 2016 2017


Delvo patented MasterMatrix MasterEase Xolutec unique
cement hydration Smart Dynamic viscosity control chemistry for
control system Concrete launched for easy pumping concrete protection

2002 2009 2016 2018


Glenium X-Seed MasterFiber CB 2200 Nano particle
ACE Zero Energy revolutionary world‘s first admixtures for precast
and SKY Total nanotechnology chemically bonded concrete?
Performance accelerator structural fiber Geopolymer concretes
Control and coatings?
Master Builders Solutions

Construction challenges solved


The Master Builders Solutions range of products are used to solve construction challenges in all sectors
of the construction industry.

Non- Residential
Buildings Marine Structure Bridges, Rail & Roads

Electronic Industry Power Generation


Chemical Industry
Industry

Pharmaceutical Industry Oil & Gas Industry Mining Industry

Food & Beverage


Residential Buildings Parking Decks
Industry
Master Builders Solutions

Construction challenges solved


The Master Builders Solutions range of products are used to solve construction challenges in all sectors
of the construction industry.

Cement Additives Admixtures Underground


Construction

Concrete Repair &


Tile Fixing Systems Wall Systems / EIFS
Protection Systems

Performance Expansion Control Waterproofing &


Grouts Systems Sealants

Flooring Systems
Master Builders Solutions

Our chemistry is used in almost all industries

Infrastructures

Residential
Buildings
Commercial
Buildings
Master Builders Solutions

Admixtures Systems

Our innovations in admixtures have been adding value


and reliability to concrete construction since the early
1930’s.
We have been at the forefront of every major advance
in concrete admixture technology for over 100 years,
helping our Ready Mix Concrete, Precast and
Manufactured Concrete Product customers
overcome their everyday technical and commercial
challenges.
Our value added products allow high performance
concrete to be reliably produced with improved
workability, viscosity, rheology, pumpability, strength,
and durability with greater sustainability, and less
environmental impact because of the increased use of
Portland cement replacement materials.

Our Admixture Brands include:


Type Name Description

MasterGlenium Advanced polymer solutions for hyper plasticized and


high performance concrete
Value added products

MasterMatrix Rheology control for economic self consolidating concrete

MasterEase Viscosity reducing solutions for improved pumpability and


placement
MasterLife Innovative solutions for increased concrete durability

Master X-Seed Advanced accelerator solutions for concrete

MasterSet Controlling setting time of concrete

MasterRheobuild BNS superplasticizer for high strength concrete


admixtures
Standard

MasterPolyheed Solutions for mid-range concrete

MasterPozzolith Water reducing admixtures

MasterFiber Comprehensive range of fibers for reinforcement


Others

MasterKure Curing compounds

MasterCast Admixtures for manufactured concrete products


Master Builders Solutions

Underground Construction

Underground Construction team are a world


leader in the provision of reliable, customer
oriented solutions focused on the needs of the
tunneling and mining industries. In Saudi
Arabia we also provide a dedicated technical
service for this highly specialized construction
sector. Our innovative chemistries and
technologies are specifically designed to
overcome the specific challenges presented by
the harsh operating conditions found
underground.

Our Underground Construction Systems Brands include:

Name Type Description

MasterRoc SLF Soil Foams for improving performance and reducing


Conditoners wear on TBMs
MasterRoc SLP Soil Soil conditioning stabilizing polymers
Conditoners
MasterRoc ACP Soil Anti clay additives
Conditoners
MasterRoc TSG Tail Sealants Driving and first fill greases and sealants for
for TBMs improved TBM tail shield performance
MasterRoc SA Admixture Alkali free accelerators for sprayed concrete

MasterGlenium Admixture Hyerperformance admixtures for sprayed and


poured concretes
MasterRoc HCA Admixture Extreme set control for concrete on demand

MasterFiber Fiber Wide range of steel and polymer fibers for


optimization of application rates and performance
MasterSeal Waterproofing Polymer modified cementitious sprayed and sheet
applied systems
MasterInject Injection For waterstopping, pre and post injection, ground
systems consolidation etc etc
Master Builders Solutions

Construction Systems

The Master Builders Solutions SBU, Construction


Systems has over 100 years experience of
improving the durability, service lives and
sustainability of buildings and structures.
The comprehensive portfolio allows owners,
engineers, architects and contractors to repair,
protect, waterproof, bond, insulate and strengthen
with compatible products from a single
manufacturer.

Our Construction Systems Brands include:

Name System Type Description

MasterEmaco Concrete repair Cementitious repair mortars, primers,


sacrificial anodes,
MasterBrace Concrete Fiber reinforced strengthening systems, and
strengthening and structural adhesives
structural bonding
further degradation. Our portfolio also
MasterProtect Protective coatings includes sound
Comprehensive solutions
range for rehabilitation
of acrylic, epoxy,
of wharves,
polyurethane bridges, coatings
performance roads, tunnels,
for
buildingsof as
protection well as
concrete andsewers and water
other substrates
retaining structures.
MasterInject Crack injection Structural and non structural crack repair

MasterSeal Waterproofing and Cementitious, bitumen, polyurethane,


Joint Sealing polyurea, liquid and sheet applied
membranes, sealants and coatings
MasterTop Performance Cementitious, epoxy, polyurethane high
flooring systems performance decorative and resilient
screeds toppings and coatings
Ucrete Polyurethane Chemical and heat resistant floors for the
concrete flooring harshest environments
MasterTile Tile fixing systems Adhesives, grouts, waterproofing for fixing
ceramic, porcelain and natural stone tiles
MasterFlow Performance Cementitious, epoxy high performance,
grouting and structural non shrink grouts and anchors
Anchoring
Senergy EIFS systems Comprehensive range for external heat
insulation and protection of structures
Wabo Engineering Expansion joints, pot bearings and other
systems civil engineering products
Master Builders Solutions

Job References : Saudi Arabia


Master Builders Solutions have been used to solve construction challenges on many iconic projects
within the Kingdom of Saudi Arabia

Al Fadhili Gas Program Saudi Arabian Monetary Agency Safe Vault

Luna DLM Training Center Aramco Jizan Refinery

King Abdullah Financial district King Abdul Aziz International Airport


Master Builders Solutions

Job References : Saudi Arabia continued

King Abdullah Sport City Al Jawhara International Riyadh Metro Project

Al-Wajeed strategic water filtration & treatment Kingdom Tower

3rd Expansion of the Holy Haram Makkah & Madina Hajj City
Surrounding Areas, Expansion Building, Piazza
& Mataf
ISO Certificate
(ISOC)
CERTIFICATE
Certificate Registration No.: 12 104 60146/100 TMS / Order No.: 770000041

The Certification Body


of TÜV SÜD Management Service GmbH
certifies that the organization
Sika AG
Zugerstrasse 50
6340 Baar
Switzerland
represented by
MBCC Investments GmbH
Glücksteinallee 69
68163 Mannheim
Germany
at the site

Master Builders Solutions


Saudi Arabia for Manufacturing LLC.
Building No. 3042, Prince Nawwaf street 2nd Industrial City
34326 Dammam
Kingdom of Saudi Arabia
for the scope

The Manufacture, storage, sale and distribution of


construction chemical products, solutions and services
to the construction industry

has established and applies an Environmental Management System.


An audit was performed and has furnished proof
that the requirements according to

DIN EN ISO 14001:2015


are fulfilled.
The certificate is valid in conjunction
with the main certificate from 2024-02-23 until 2024-10-09.

Fred Wenke
Head of Certification Body
Munich, 2024-02-26
CERTIFICATE
Certificate Registration No.: 12 104 60146/117 TMS / Order No.: 770000041

The Certification Body


of TÜV SÜD Management Service GmbH
certifies that the organization
Sika AG
Zugerstrasse 50
6340 Baar
Switzerland
represented by
MBCC Investments GmbH
Glücksteinallee 69
68163 Mannheim
Germany
at the site

Master Builders Solutions Saudi Arabia


for Manufacturing LLC.
The industrial zone, the second and third phases 5234
25752 Rabigh
Kingdom of Saudi Arabia
for the scope

The Manufacture, storage, sale and distribution of


construction Chemical products, solutions and services
to the construction industry

has established and applies an Environmental Management System.


An audit was performed and has furnished proof
that the requirements according to

DIN EN ISO 14001:2015


are fulfilled.
The certificate is valid in conjunction
with the main certificate from 2024-02-23 until 2024-10-09.

Fred Wenke
Head of Certification Body
Munich, 2024-02-26
CERTIFICATE
Certificate Registration No.: 12 100 60146/100 TMS / Order No.: 770000040

The Certification Body


of TÜV SÜD Management Service GmbH
certifies that the organization
Sika AG
Zugerstrasse 50
6340 Baar
Switzerland
represented by
MBCC Investments GmbH
Glücksteinallee 69
68163 Mannheim
Germany
at the site

Master Builders Solutions


Saudi Arabia for Manufacturing LLC.
Building No. 3042, Prince Nawwaf street 2nd Industrial City
34326 Dammam
Kingdom of Saudi Arabia
for the scope

The Manufacture, storage, sale and distribution of


construction chemical products, solutions and services
to the construction industry

has established and applies a Quality Management System.


An audit was performed and has furnished proof
that the requirements according to

DIN EN ISO 9001:2015


are fulfilled.
The certificate is valid in conjunction
with the main certificate from 2024-02-23 until 2024-09-13.

Fred Wenke
Head of Certification Body
Munich, 2024-02-26
CERTIFICATE
Certificate Registration No.: 12 100 60146/118 TMS / Order No.: 770000040

The Certification Body


of TÜV SÜD Management Service GmbH
certifies that the organization
Sika AG
Zugerstrasse 50
6340 Baar
Switzerland
represented by
MBCC Investments GmbH
Glücksteinallee 69
68163 Mannheim
Germany
at the site

Master Builders Solutions Saudi Arabia


for Manufacturing LLC.
Al Othman Business Tower 14th Floor,
King Saud Road, Al Qashlah
34232 Dhahran
Kingdom of Saudi Arabia
for the scope

Management Functions including Sales, HR and Procurement

has established and applies a Quality Management System.


An audit was performed and has furnished proof
that the requirements according to

DIN EN ISO 9001:2015


are fulfilled.
The certificate is valid in conjunction
with the main certificate from 2024-02-23 until 2024-09-13.

Fred Wenke
Head of Certification Body
Munich, 2024-02-26
CERTIFICATE
Certificate Registration No.: 12 100 60146/117 TMS / Order No.: 770000040

The Certification Body


of TÜV SÜD Management Service GmbH
certifies that the organization
Sika AG
Zugerstrasse 50
6340 Baar
Switzerland
represented by
MBCC Investments GmbH
Glücksteinallee 69
68163 Mannheim
Germany
at the site

Master Builders Solutions Saudi Arabia


for Manufacturing LLC.
The industrial zone, the second and third phases 5234
25752 Rabigh
Kingdom of Saudi Arabia
for the scope

The Manufacture, storage, sale and distribution of


construction Chemical products, solutions and services
to the construction industry

has established and applies a Quality Management System.


An audit was performed and has furnished proof
that the requirements according to

DIN EN ISO 9001:2015


are fulfilled.
The certificate is valid in conjunction
with the main certificate from 2024-02-23 until 2024-09-13.

Fred Wenke
Head of Certification Body
Munich, 2024-02-26
Technical Data Sheet
(TDS)
SikaTop® 550 Seal (Formerly MasterSeal ® 550)
Acrylic reinforced cementitious, flexible waterproof coating

DESCRIPTION - High resistance to chloride ion diffusion.


SikaTop® 550 Seal is a two component acrylic modified - Unlike conventional coatings which require a 7-28
cementitious coating that requires only on site mixing to day cure of concrete, SikaTop® 550 Seal can be
form the ideal product to waterproof and resurface applied to 24 hour-old concrete thereby giving
concrete, masonry, and most other construction immediate protection.
materials.
Simply applied by stiff brush, roller, or trowel, it forms a COMPOSITION
waterproof, flexible coating. SikaTop® 550 Seal is composed of specially selected
SikaTop® 550 Seal provides an effective barrier to cements, silica sand and reactive fillers supplied in
waterborne salts and atmospheric gases. powder form together with a liquid component of
Fluid applied, SikaTop® 550 Seal provides a hard blended acrylic copolymers and wetting agents.
wearing, seamless, waterproof membrane for roofs and
foundation protection. TYPICAL PROPERTIES*
Density: 1826kg/m³
TYPICAL APPLICATIONS Toxicity: Non toxic - Suitable for use in
- To reface and even out variations in concrete contact with potable water
surfaces. Initial surface absorption: >95% reduction against
- As a waterproof lining for water retaining structures. control
- For coating seawater channels. Chloride ion diffusivity: Not measurable after 24
- Sealing and coating tie bar holes to ensure water months of testing
tightness. Moisture vapor SD < 1.5m (839μm dft.)
- For waterproofing and protection against brackish transmission (equivalent
water. air layer thickness):
- To provide foundation protection.
- As a waterproof coating for roofs. Tensile Strength (ASTM D 412) ≥ 3 MPa
- As a backing to marble and granite to prevent water
Tensile
ingress and thus alleviate surface staining. ≥ 0.5 MPa
Adhesion Strength (BS EN 14891)
- To provide protection to concrete surfaces from Depth of Water Penetration @ 7 Bar
carbonation and chloride attack. nil
( DIN 1048)
- For use on pedestrian walkways in marine areas.
Abrasion Resistance (ASTM D 4060)
<180 mg
(CS 17 Wheel, 1000 g weight, 1000 cycles)
PACKAGING
SikaTop® 550 Seal is available in 20kg/40kg double
pack.
SikaTop® 550 Seal is available in three standard colors Note: Test results shown above are typical results obtained
: Light Grey(J), White (K) and Grey. when tested at standard laboratory conditions w.r.t test std.

ADVANTAGES STANDARDS
- Waterproof BS 6920 : Part 1 2014 complies with the requirements
- Excellent adhesion. Bonds to porous and non-porous for use in potable water application
surfaces. BS 476: Part 6 : 1989 - Fire tests on building material: &
- Flexible. structures - Method of test for fire propagation for
- Non toxic suitable for contact with potable water. products.
- Suitable for light pedestrian traffic.
- Breathable - whilst repelling water, allows substrate
to breathe.

SikaTop® 550 Seal 1/4


SikaTop® 550 Seal (Formerly MasterSeal ® 550)
Acrylic reinforced cementitious, flexible waterproof coating

CHLORIDE ION DIFFUSIVITY MIXING


SikaTop® 550 Seal provides an effective barrier to SikaTop® 550 Seal is supplied in premeasured units
waterborne salts such as chlorides and sulphates. and should be mixed on site utilizing clean containers.
*independent assessment has shown that even after 12 Slowly add the powder to the liquid and mix, using a
months constant immersion the chloride ion diffusion co- slow speed drill fitted with a suitable paddle. MIX AND
efficient could not be measured for SikaTop® 550 Seal . USE. Do not mix more material than can be used in one
hour.
CHEMICAL RESISTANCE NOTE: Although SikaTop® 550 Seal is supplied in
premeasured packs, part packs can be used by mixing 2
SikaTop® 550 Seal has outstanding wear and weather
volumes of powder to 1 volume of liquid. Mix thoroughly
resistance and good resistance to gasoline, diesel oil,
and keep mixed during application.
sodium hydroxide, calcium chloride, de-icing salts.
DO NOT RE-TEMPER WITH WATER.
SikaTop® 550 Seal coated surfaces exhibit good
resistance to mild acids.
APPLICATION
ANTI CARBONATION COATING Do not apply to dry concrete Saturate concrete surfaces
with clean water whilst still visibly damp, but free of
SikaTop® 550 Seal is an extremely effective barrier to
standing water, apply, using a short, stiff bristle brush or
atmospheric acidic gases which cause carbonation in
roller. Trowel application can be undertaken as
concrete structures. SikaTop® 550 Seal at an applied
necessary. For heavy 6-10mm depressions,
rate of 1.8 kg/m² gives an equivalent air layer thickness
honeycombs etc. use less gauging liquid and mix to the
for carbon dioxide diffusion (R) of 92 meters. The
desired consistency. Where more than one coat is found
accepted minimum value for R is 50m. Testing to
necessary to achieve the desired thickness, apply the
confirm this was carried out independently by Taywood
second or subsequent coats after the previous coat has
Engineering 2005. A report is available on request.
dried.
It is recommended, for general resurfacing, that each
APPLICATION PROCEDURE coat should be a minimum of 1mm thick. Spray
Surface preparation: application is recommended for large areas, details of
As with all coating systems, surface preparation is of suitable equipment can be provided by Master Builders
prime importance. Remove all grease, oil, dust, residual Solutions Technical Service Dept.
curing compound, mold release agent or other
contaminant that could impair adhesion. Laitance should COVERAGE
preferably be removed by light sweep blasting or hydro- 1.826 kg / m² at 1 mm thickness.
jetting. Mechanical wire brushing may be appropriate for
small areas. Spalled concrete should be cut back to
sound concrete and made good with a suitable
SPECIFICATION CLAUSE
cementitious repair mortar such as SikaEmaco® S488.
Conventional concrete curing compounds should be
removed before application. The exception to this is
when Sika® Antisol® 181 has been used. Roofing tiles
should be firmly bedded and grouted before application.

SikaTop® 550 Seal 2/4


SikaTop® 550 Seal (Formerly MasterSeal ® 550)
Acrylic reinforced cementitious, flexible waterproof coating

NOTE QUALITY AND CARE


Where subsequent tiling works are to be carried out on All Master Builders Solutions Products are manufactured
vertical surfaces, contact the local Master Builders under a management system independently certified to
Solutions representative for advice. conform to the requirements of the quality,
environmental and occupational health and safety
SAFETY PRECAUTIONS standards of ISO 9001 and Master Builders Solutions
ESHQ recommendations.
As with all chemical products, care should be taken
* Properties listed are based on laboratory controlled
during use and storage to avoid contact with eyes,
tests.
mouth, skin and foodstuffs. Treat splashes to eyes and
® = Registered trademark of the MBCC-Group in many
skin immediately. If accidentally ingested, seek
countries
immediate medical attention.

STORAGE CONTACT
Should you require any further information, please do
Store out of direct sunlight, clear of the ground on pallets
not hesitate to contact us:
protected from rainfall. Avoid excessive compaction.
Failure to comply with the recommended storage
www.master-builders-solutions.com/en-sa
conditions may result in premature deterioration of the
[email protected]
product or packaging. For specific storage advice
+966 13 853 8600
consult Master Builders Solutions Technical Services
Department.
Master Builders Solutions Saudi Arabia for
NOTE Manufacturing LLC.
Field service, where provided, does not constitute P.O. Box 1884, Al Khobar, KSA
supervisory responsibility. For additional information
contact your local Master Builders Solutions
representative.
Master Builders Solutions reserves the right to have the
true cause of any difficulty determined by accepted test
methods.

LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith
based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in
accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever,
can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the
product must test the product’s suitability for the intended application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery.
Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be
supplied on request.
BASIS OF PRODUCT All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond
DATA our control.
LOCAL Note that as a result of specific local regulations the declared data and recommended uses for this product may vary from country to
RESTRICTIONS country. Consult the local Product Data Sheet for exact product data and uses.

SikaTop® 550 Seal 3/4 Master Builders Solutions Saudi 02-14 / 02-20/ 01-22 / 04-24
Material Safety Data
Sheets
(MSDS)
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

1. PRODUCT AND COMPANY IDENTIFICATION

Product name : SikaTop®-550 Seal Formerly MasterSeal 550

Product code : 000000000050683483

Manufacturer or supplier's details


Company : Master Builders Solutions Saudi Arabia
for Manufacturing LLC.

Address : Dammam 2nd Industrial Area


AL Khobar 31952

Telephone : +966966138121140

Emergency telephone : ChemTel: +1-813-248-0585

Telefax : +966966138121822

Recommended use of the chemical and restrictions on use


Recommended use : Product for construction chemicals

2. HAZARDS IDENTIFICATION

GHS Classification
Not a hazardous substance or mixture.
GHS label elements
Not a hazardous substance or mixture.

Other hazards which do not result in classification


If applicable information is provided in this section on other hazards which do not result in classi-
fication but which may contribute to the overall hazards of the substance or mixture.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance / Mixture : Mixture


Components
No hazardous ingredients

4. FIRST AID MEASURES

General advice : First aid personnel should pay attention to their own safety.
Immediately remove contaminated clothing.

If inhaled : Keep patient calm, remove to fresh air.


If symptoms persist, seek medical advice.
In case of skin contact : After contact with skin, wash immediately with plenty of water
and soap.
Under no circumstances should organic solvent be used.
If irritation develops, seek medical attention.

1/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

In case of eye contact : Wash affected eyes for at least 15 minutes under running
water with eyelids held open, consult an eye specialist.
If swallowed : Immediately rinse mouth and then drink 200-300 ml of water,
seek medical attention.
Do not induce vomiting unless told to by a poison control cen-
ter or doctor.
Most important symptoms : Information, i.e. additional information on symptoms and ef-
and effects, both acute and fects may be included in the GHS labeling phrases available
delayed in Section 2 and in the Toxicological assessments available in
Section 11.
Notes to physician : Treat symptomatically.

5. FIRE-FIGHTING MEASURES

Suitable extinguishing media : Foam


Water spray
Dry powder
Carbon dioxide (CO2)
Unsuitable extinguishing : water jet
media
Hazardous combustion prod- : fumes/smoke
ucts harmful vapours
Carbon oxides
nitrogen oxides
carbon black

Specific extinguishing meth- : The degree of risk is governed by the burning substance and
ods the fire conditions.
If exposed to fire, keep containers cool by spraying with water.
Collect contaminated extinguishing water separately, do not
allow to reach sewage or effluent systems.
Contaminated extinguishing water must be disposed of in
accordance with official regulations.
Special protective equipment : Wear a self-contained breathing apparatus.
for fire-fighters

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protec- : Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
tive equipment and emer- Wear eye/face protection.
gency procedures Use personal protective clothing.
Handle in accordance with good building materials hygiene
and safety practice.

Environmental precautions : Contain contaminated water/firefighting water.


Do not discharge into drains/surface waters/groundwater.

Methods and materials for : Pick up with suitable appliance and dispose of.
containment and cleaning up Dispose of absorbed material in accordance with regulations.

7. HANDLING AND STORAGE

Advice on protection against : The product is neither self-ignitable, nor an explosion hazard,
fire and explosion nor does it promote fires.

2/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

Advice on safe handling : Avoid inhalation of dusts/mists/vapours.


Avoid skin contact.
Ensure adequate ventilation.
No special measures necessary provided product is used
correctly.
Further information on stor- : Keep only in the original container in a cool, dry, well-
age conditions ventilated place away from ignition sources, heat or flame.
Protect from direct sunlight.

Further information on stor- : No decomposition if stored and applied as directed.


age stability

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Ingredients with workplace control parameters


Contains no substances with occupational exposure limit values.
Personal protective equipment
Respiratory protection : Wear respiratory protection if ventilation is inadequate.
Combination filter for gases/vapours of organic, inorganic,
acid inorganic and alkaline compounds (e.g. EN 14387 Type
ABEK).
Hand protection

Remarks : impermeable gloves Synthetic rubber gloves Manufacturer's


directions for use should be observed because of great di-
versity of types.
Eye protection : Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Skin and body protection : Body protection must be chosen based on level of activity and
exposure.
Protective measures : Do not inhale dust/fumes/aerosols.
Avoid contact with the skin, eyes and clothing.
Avoid exposure.
Handle in accordance with good building materials hygiene
and safety practice.
Wearing of closed work clothing is recommended.
Hygiene measures : When using, do not eat, drink or smoke.
Hands and/or face should be washed before breaks and at the
end of the shift.
At the end of the shift the skin should be cleaned and skin-
care agents applied.
Gloves must be inspected regularly and prior to each use.
Replace if necessary (e.g. pinhole leaks).

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : liquid

Color : white

Odor : acrylic-like

Odor Threshold : not determined

pH : 5 - 8 (25 °C)

3/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

Melting point : Not applicable

Boiling point : > 100 °C

Flash point : No data available

Evaporation rate : No data available

Upper explosion limit / Upper : No data available


flammability limit

Lower explosion limit / Lower : No data available


flammability limit

Vapor pressure : No data available

Relative vapor density : No data available

Relative density : No data available

Density : 1,020 g/cm3 (25 °C)

Solubility(ies)
Water solubility : soluble (25 °C)

Solubility in other solvents : No data available

Partition coefficient: n- : not applicable for mixtures


octanol/water
Autoignition temperature : No data available

Decomposition temperature : No decomposition if stored and handled as pre-


scribed/indicated.

Viscosity
Viscosity, dynamic : No data available

Viscosity, kinematic : No data available

Explosive properties : Not explosive

Oxidizing properties : not fire-propagating

10. STABILITY AND REACTIVITY

Reactivity : No hazardous reactions if stored and handled as pre-


scribed/indicated.
Chemical stability : The product is stable if stored and handled as pre-
scribed/indicated.
Possibility of hazardous reac- : The product is stable if stored and handled as pre-
tions scribed/indicated.

4/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

Conditions to avoid : See SDS section 7 - Handling and storage.


Incompatible materials : Strong acids
Strong bases
Strong oxidizing agents
Strong reducing agents
Hazardous decomposition : No hazardous decomposition products if stored and handled
products as prescribed/indicated.

11. TOXICOLOGICAL INFORMATION

Acute toxicity
Not classified based on available information.
Skin corrosion/irritation
Not classified based on available information.
Serious eye damage/eye irritation
Not classified based on available information.
Respiratory or skin sensitization

Skin sensitization
Not classified based on available information.
Respiratory sensitization
Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
Not classified based on available information.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information

Product:
Remarks : Health injuries are not known or expected under normal use.
No data is available on the product itself.
Information given is based on data on the ingredients and the
toxicology of similar products.

5/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

12. ECOLOGICAL INFORMATION

Ecotoxicity

Product:

Ecotoxicology Assessment
Acute aquatic toxicity : This product has no known ecotoxicological effects.

Chronic aquatic toxicity : This product has no known ecotoxicological effects.

Persistence and degradability

Product:
Biodegradability : Remarks: Taking into consideration the properties of several
ingredients, the product is estimated not to be readily biode-
gradable according to OECD classification.

Bioaccumulative potential

Product:
Bioaccumulation : Remarks: No data available.
Discharge into the environment must be avoided.

Mobility in soil
No data available
Other adverse effects

Product:
Additional ecological infor- : Do not discharge product into the environment without control.
mation The product has not been tested. The statements on ecotoxi-
cology have been derived from the properties of the individual
components.

13. DISPOSAL CONSIDERATIONS

Disposal methods
Waste from residues : Observe national and local legal requirements.
Residues should be disposed of in the same manner as the
substance/product.
Contaminated packaging : Contaminated packaging should be emptied as far as possi-
ble; then it can be passed on for recycling after being thor-
oughly cleaned.
Packs that cannot be cleaned should be disposed of in the
same manner as the contents.

14. TRANSPORT INFORMATION

International Regulations

6/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

UNRTDG
Not regulated as a dangerous good
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.

15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.

16. OTHER INFORMATION

Revision Date : 22.11.2023


Full text of other abbreviations

AIIC - Australian Inventory of Industrial Chemicals; ANTT - National Agency for Transport by
Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR -
Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for
Standardisation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with
x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule;
ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with
x% growth rate response; ERG - Emergency Response Guide; GHS - Globally Harmonized Sys-
tem; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer; IATA
- International Air Transport Association; IBC - International Code for the Construction and
Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory con-
centration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemi-
cal Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International
Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - International Or-
ganisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal Con-
centration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Median
Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC - No Observed (Adverse) Effect
Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect
Loading Rate; NOM - Official Mexican Norm; NTP - National Toxicology Program; NZIoC - New
Zealand Inventory of Chemicals; OECD - Organization for Economic Co-operation and Develop-
ment; OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumu-
lative and Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substanc-
es; (Q)SAR - (Quantitative) Structure Activity Relationship; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evalua-
tion, Authorisation and Restriction of Chemicals; SADT - Self-Accelerating Decomposition Tem-
perature; SDS - Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TDG - Trans-
portation of Dangerous Goods; TECI - Thailand Existing Chemicals Inventory; TSCA - Toxic Sub-
stances Control Act (United States); UN - United Nations; UNRTDG - United Nations Recom-

7/8
SAFETY DATA SHEET

SikaTop®-550 Seal Formerly MasterSeal 550


Version Revision Date: SDS Number: Date of last issue: 14.04.2021
1.3 22.11.2023 000000271239 Date of first issue: 23.04.2020

mendations on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumu-
lative; WHMIS - Workplace Hazardous Materials Information System

The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.

UN / EN

8/8
Test Reports
(TR)
Cl•BASF
The Chemical Company

Saudi BASF For Building Materia ls Co Ltd, PO Box 1884, Al Khobar 31952, KSA A,i.l�l�!v"!.,$1.,,,,.<IS_.,..!, SAUDI BASF
;,3-=-tl ,l.;.,J1 01Ji For Building Materials Co. Ltd.
\AM. ·'7'·L>"' P.O. Box 1884
rl\or __..,..;JI
Date : i h November, 2013 42,�1 �_,..JI .s.wi
AI-Khobar 31952
Kingdom of Saudi Arabia
Reference : TD/Lab/LEED/13-0033
�.,J1�1 Head Office
+'-'HAmH-,....,1..,, Tel: +966 3 8121140
An, AmAn,,._,.S't.;, Fax:+966 3 8121822
www.saudi-basf.com
[email protected]

MASTERSEAL® 550 LEED Product Information

MASTERSEAL® 550 is an acrylic reinforced cementitious, flexible waterproof


coating.

Manufacturing Location
Dammam - Kingdom of Saudi Arabia

Recycled Content
Saudi BASF for Building Materials Co. Ltd. certifies that MASTERSEAL® 550
has neither post-consumer nor pre-consumer recycled contents.

VOC Content
SAUDI BASF certifies that the VOC (Volatile Organic Compound) of
MASTERSEAL® 550 is less than 50 g/ltr.

Construction Waste Management


The Packing materials used for MASTERSEAL® 550 are recyclable where
recycling facilities exist.

7
:iJ;�I ,L.4,)1 Jl;,1 �J;,a..JI j1 _,..l;ji I]': J.5_=
For and on behalf of Saudi BASF
Saudi BASF Co. Ltd, for Building :\Hls. Co. Lid.
(2) ( r)
c..l�l3ul��1,�
Jign sh Thakkar Technical Department
Technical Manager - Saudi and Near East

<L--J'J ,••• 11 ��1 as:, • ,11_,......9;;..,J..t-...=....o �J�.:..l.l 4....5�


A Private Company Incorporated with limited liability in the Kingdom of Saudi Arabia
Paid Up Share Capital SR. 8.5 Million J½.; 0� A. o t3-...ll..c....JI JWI __,.i.;
Commercial Registration No.: 2050037620 r-o--rv-n- �J<.#J�J.....-....
Approvals
(AP)
MasterAir® MasterGlenium® MasterRoc®
Complete solutions for air entrained Solutions for hyperplasticized Solutions for underground
concrete concrete construction

MasterBrace® MasterInject® MasterSeal®


Solutions for concrete Solutions for concrete injection Solutions for waterproofing and
strengthening sealing
MasterKure®
MasterCast® Solutions for concrete curing MasterSet®
Solutions for the manufactured Solutions for set control
concrete product industry MasterLife®
Solutions for enhanced durability MasterTile®
MasterCem® Solutions for tile fixing system
Solutions for cement manufacture MasterMatrix®
Advanced rheology control MasterTop®
MasterEase® solutions for self-consolidating Solutions for industrial and
Solutions for reducing concrete concrete commercial floors
viscosity
MasterPel® MasterWeld®
MasterEmaco® Solutions for water tight concrete Adhesive solutions for construction
Solutions for concrete repair
MasterPolyheed® Master X-Seed®
MasterFinish® Solutions for mid-range concrete Advance addelerator solutions for
Solutions for formwork treatment concrete
MasterPozzolith®
MasterFlame® Solutions for water-reduced Ucrete®
Complete firestopping solutions concrete Flooring solutions for harsh
environments
MasterFlow® MasterProtect®
Solutions for precision grouting Solutions for concrete protection

MasterFiber® MasterRheobuild®
Comprehensive solutions for fiber Solutions for high strength concrete
reinforced concrete

Contact Information:
Head Office Riyadh Sales Office
Al-Othman Business Tower 14th Floor, Alamir Mohammed Abdulaziz
King Saud Road, Al Qashlah, Dhahran Str. Olayya Riyadh 12222,
34232, P.O. Box 1884, Al Khobar 31952 Kingdom of Saudi Arabia
Tel: +96613 8538600, 13812 1140 Phone: +966 11 279 0971
Fax : +966 13 832 8671, 13 812 1822 Fax : +966 11 279 0970
Registered Office / Factory Jeddah Sales Office
P.O. Box 1884 AI-Khobar 31952 , Road No. Prince Sultan Street, Zahran Business
58, Hail Street , 2nd Industrial City, Dammam, Center, 13th floor, office 1308.
KSA Tel: +966 12 639 4799 - 12 639 5702
Tel.:+966 13 812 1140 Fax : +966 12 639 4934
Fax:+966138121822

Website

You might also like