See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/350467546

Significance of Research Process in Research Work

Preprint · March 2021

DOI: 10.13140/RG.2.2.32664.93445/1

CITATION READS
1 167,111

1 author:

Ajit Singh
Bihar National College
125 PUBLICATIONS 509 CITATIONS

SEE PROFILE

All content following this page was uploaded by Ajit Singh on 01 June 2021.

The user has requested enhancement of the downloaded file.

 Significance of Research Process in Research Work

Ajit Singh
Department of Computer Science
Patna Women's College, Bihar, INDIA
Email: [email protected]

Abstract: Research process consists of a series of steps or actions required for effectively
conducting research while formulating the research problem, extensive literature survey, developing
hypothesis, preparing the research design, determining sample design, collecting data, execution of
the project, analysis of data, hypothesis testing, generalization and interpretation, and preparation of
the report or presentation of the results.
Research encourages scientific and inductive thinking, besides promoting the development of
logical habits of thinking and organisation. According to Clifford woody, research comprises
defining and redefining problems, formulating hypothesis or suggested solutions collecting,
organising and evaluating data, making deductions and reaching conclusions; to determine
whether they fit the formulating hypothesis.

This paper explains the research and it's objective, characteristics, types, method of collecting
primary data, design, hypothesis, sampling and testing with respect to research work.

Keyword: Research, Classification, Design, Sampling, Hypothesis, Testing, Data Collection

1 . INTRODUCTION
Research refers to a search for knowledge. Research is an art of scientific investigation. The
Advanced Learner‟s Dictionary of Current English lays down the meaning of research as, “a
careful investigation or inquiry specially through search for new facts in any branch of
knowledge”.
Redman and Mory define research as a,” Systematized effort to gain new knowledge”. Some
people consider research as a movement, a movement from the known to the unknown.
According to Clifford woody, research comprises defining and redefining problems, formulating
hypothesis or suggested solutions collecting, organising and evaluating data, making deductions
and reaching conclusions; to determine whether they fit the formulating hypothesis.

According to a famous Hudson Maxim, “All progress is born of inquiry. Doubt is often better
than overconfidence, for it leads to inquiry, and inquiry leads to invention”. It brings out the
significance of research, increased amount of which makes the progress possible.
The Research Process is a process of multiple scientific steps in conducting the research work.
Each step is interlinked with other steps. The process starts with the research problem at first.
Then it advances in the next steps sequentially. Generally, a researcher conducts research work
within seven steps. In research work, primarily, you require a Research Proposal. It is because
the proposal approves the research project whether you achieve the ability to conduct research or
not. So when you write a research proposal, present the detailed plans and specific objectives of
your research correctly.

2. OBJECTIVES OF RESEARCH

1. To gain familiarity with a phenomenon or to achieve new insights into it. (exploratory or
formulative research studies)
2. To describe accurately the characteristics of a particular individual, situation or a group.
(descriptive research)
3. To determine the frequency with which something occurs or with which it is associated with
something else. (studies with this object known as diagnostic research)
4. To test a hypothesis of a causal relationship between variables. (such studies are known as
hypothesis testing research}

3. TYPES OF RESEARCH
There are different types of research. The basic ones are as follows.
1. Descriptive Versus Analytical
Descriptive research consists of surveys and fact-finding enquiries of different types. The main
objective of descriptive research is describing the state of affairs as it prevails at the time of study.
The term ‘ex post facto research’ is quite often used for descriptive research studies in social sciences
and business research. The most distinguishing feature of this method is that the researcher has no
control over the variables here. He/she has to only report what is happening or what has happened.
Majority of the ex post facto research projects are used for descriptive studies in which the researcher
attempts to examine phenomena, such as the consumers’ preferences, frequency of purchases,
shopping, etc. Despite the inability of the researchers to control the variables, ex post facto studies
may also comprise attempts by them to discover the causes of the selected problem. The methods of
research adopted in conducting descriptive research are survey methods of all kinds, including
correlational and comparative methods. Meanwhile in the Analytical research, the researcher has to
use the already available facts or information, and analyse them to make a critical evaluation of the
subject.
2. Applied Versus Fundamental
Research can also be applied or fundamental in nature. An attempt to find a solution to an immediate
problem encountered by a firm, an industry, a business organisation, or the society is known as
applied research. Researchers engaged in such researches aim at drawing certain conclusions
confronting a concrete social or business problem. On the other hand, fundamental research mainly
concerns generalizations and formulation of a theory. In other words, “Gathering knowledge for
knowledge’s sake is termed ‘pure’ or ‘basic’ research” (Young in Kothari, 1988). Researches
relating to pure mathematics or concerning some natural phenomenon are instances of
Fundamental Research. Likewise, studies focusing on human behaviour also fall under the
category of fundamental research. Thus, while the principal objective of applied research is to
find a solution to some pressing practical problem, the objective of basic research is to find
information with a broad base of application and add to the already existing organized body of
scientific knowledge
3. Quantitative Versus Qualitative
Quantitative research relates to aspects that can be quantified or can be expressed in terms of
quantity. It involves the measurement of quantity or amount. Various available statistical and
econometric methods are adopted for analysis in such research. Which includes correlation,
regressions and time series analysis etc,. On the other hand, Qualitative research is concerned with
qualitative phenomena, or more specifically, the aspects related to or involving quality or kind. For
example, an important type of qualitative research is ‘Motivation Research’, which investigates into
the reasons for certain human behaviour. The main aim of this type of research is discovering the
underlying motives and desires of human beings by using 7 in-depth interviews. The other techniques
employed in such research are story completion tests, sentence completion tests, word association
tests, and other similar projective methods. Qualitative research is particularly significant in the
context of behavioural sciences, which aim at discovering the underlying motives of human
behaviour. Such research helps to analyse the various factors that motivate human beings to behave
in a certain manner, besides contributing to an understanding of what makes individuals like or
dislike a particular thing. However, it is worth noting that conducting qualitative research in practice
is considerably a difficult task. Hence, while undertaking such research, seeking guidance from
experienced expert researchers is important.
4. Conceptual Versus Empirical
The research related to some abstract idea or theory is known as Conceptual Research.
Generally, philosophers and thinkers use it for developing new concepts or for reinterpreting the
existing ones. Empirical Research, on the other hand, exclusively relies on the observation or
experience with hardly any regard for theory and system. Such research is data based, which
often comes up with conclusions that can be verified through experiments or observation.
Empirical research is also known as experimental type of research, in which it is important to
first collect the facts and their sources, and actively take steps to stimulate the production of
desired information. In this type of research, the researcher first formulates a working
hypothesis, and then gathers sufficient facts to prove or disprove the stated hypothesis. He/she
formulates the experimental design, which according to him/her would manipulate the variables,
so as to obtain the desired information. This type of research is thus characterized by the
researcher’s control over the variables under study. In simple term, empirical research is most
appropriate when an attempt is made to prove that certain variables influence the other variables
in some way. Therefore, the results obtained by using the experimental or empirical studies are
considered to be the most powerful evidences for a given hypothesis.
4. STEPS OF THE RESEARCH PROCESS

Research process consists of series of actions or steps necessary to effectively carry out research
and the desired sequencing of these steps. The chart shown in Figure well illustrates a research
process. The chart indicates that the research process consists of a number of closely related
activities.

Step 1: Identify and defining the Research Problem

The first step in the process is to identify a problem or develop a research question. The research
problem may be something the agency identifies as a problem, some knowledge or information
that is needed by the agency or the desire to identify a recreation trend nationally. However, the
research problem comes up with the ongoing phenomenon or issues. Formulate Your Question :

t or thesis.

A research problem is a statement about an area of concern, a condition to be improved, a

difficulty to be eliminated, or a troubling question that exists in scholarly literature, in theory, or
in practice that points to the need for meaningful understanding and deliberate investigation. In
some social science disciplines the research problem is typically posed in the form of a question.
A research problem does not state how to do something, offer a vague or broad proposition, or
present a value question.

Step 2: Review the Literature

Once the research problem is identified and defined, the next step is to review the existing
research. The researcher must learn more about the topic under investigation. To do this, the
researcher must review the literature related to the research problem. This step provides
foundational knowledge about the problem area. The review of literature also educates the
researcher about what studies have been conducted in the past, how these studies were
conducted, and the conclusions in the problem area.

Get Background Information

 Read about your topic using websites or encyclopedias.

 It introduces you to the topic, helps you to focus on its key elements and can help you
decide to broaden or narrow your focus.
 These sources often include bibliographies that you can “piggyback” to find more
sources on your topic.
In the obesity study, the review of literature enables the programmer to discover horrifying
statistics related to the long-term effects of childhood obesity in terms of health issues, death
rates, and projected medical costs. In addition, the programmer finds several articles and
information from the Centers for Disease Control and Prevention that describe the benefits of
walking 10,000 steps a day.
The information discovered during this step helps the programmer fully understand the
magnitude of the problem, recognize the future consequences of obesity, and identify a strategy
to combat obesity (i.e., walking).

Step 3. Formulating a HYPOTHESIS

“Hypothesis may be defined as a proposition or a set of propositions set forth as an explanation

for the occurrence of some specified group of phenomena either asserted merely as a provisional
conjecture to guide some investigation in the light of established facts” (Kothari, 1988). A
research hypothesis is quite often a predictive statement, which is capable of being tested using
scientific methods that involve an independent and some dependent variables. For instance, the
following statements may be considered:
i. “Students who take tuitions perform better than the others who do not receive tuitions” or,
ii. “The female students perform as well as the male students These two statements are
hypotheses that can be objectively verified and tested. Thus, they indicate that a hypothesis states
what one is looking for. Besides, it is a proposition that can be put to test in order to examine its
validity.

Characteristics Of Hypothesis

A hypothesis should have the following characteristic features: -

i. A hypothesis must be precise and clear. If it is not precise and clear, then the inferences drawn
on its basis would not be reliable.
ii. A hypothesis must be capable of being put to test. Quite often, the research programmes fail
owing to its incapability of being subject to testing for validity. Therefore, some prior study may
be conducted by the researcher in order to make a hypothesis testable. A hypothesis “is tested if
other deductions can be made from it, which in turn can be confirmed or disproved by
observation”
iii. A hypothesis must state relationship between two variables, in the case of relational
hypotheses.
iv. A hypothesis must be specific and limited in scope. This is because a simpler hypothesis
generally would be easier to test for the researcher. And therefore, he/she must formulate such
hypotheses.
v. As far as possible, a hypothesis must be stated in the simplest language, so as to make it
understood by all concerned. However, it should be noted that simplicity of a hypothesis is not
related to its significance.
vi. A hypothesis must be consistent and derived from the most known facts. In other words, it
should be consistent with a substantial body of established facts. That is, it must be in the form of
a statement which is most likely to occur.
vii. A hypothesis must be amenable to testing within a stipulated or reasonable period of time.
No matter how excellent a hypothesis, a researcher should not use it if it cannot be tested within
a given period of time, as no one can afford to spend a life-time on collecting data to test it.

HYPOTHESIS TESTING

Testing a hypothesis refers to verifying whether the hypothesis is valid or not. Hypothesis testing
attempts to check whether to accept or not to accept the null hypothesis. The procedure of
hypothesis testing includes all the steps that a researcher undertakes for making a choice between
the two alternative actions of rejecting or accepting a null hypothesis. The various steps involved
in hypothesis testing are as follows:

1. Making a Formal Statement: This step involves making a formal statement of the null
hypothesis (H0) and the alternative hypothesis (Ha). This implies that the hypotheses should be
clearly stated within the purview of the research problem. For example, suppose a school teacher
wants to test the understanding capacity of the students which must be rated more than 90 per
cent in terms of marks, the hypotheses may be stated as follows: Null Hypothesis H0 : = 100
Alternative Hypothesis H1 : > 100

2. Selecting A Significance Level: The hypotheses should be tested on a pre-determined level of

significance, which should be specified. Usually, either 5% level or 1% level is considered for
the purpose. The factors that determine the levels of significance are:
(a) the magnitude of difference between the sample means;
(b) the sample size:
(c) the variability of measurements within samples; and
(d) whether the hypothesis is directional or non-directional In sum, the level of significance
should be sufficient in the context of the nature and purpose of enquiry.

3. Deciding The Distribution To Use: After making decision on the level of significance for
hypothesis testing, the researcher has to next determine the appropriate sampling distribution.
The choice to be made generally relates to normal distribution and the t-distribution. The rules
governing the selection of the correct distribution are similar to the ones already discussed with
respect to estimation.

4. Selection Of A Random Sample And Computing An Appropriate Value: Another step

involved in hypothesis testing is the selection of a random sample and then computing a suitable
value from the sample data relating to test statistic by using the appropriate distribution. In other
words, it involves drawing a sample for furnishing empirical data.
5. Calculation Of The Probability: The next step for the researcher is to calculate the
probability that the sample result would diverge as far as it can from expectations, under the
situation when the null hypothesis is actually true.

6. Comparing The Probability: Another step involved consists of making a comparison of the
probability calculated with the specified value of α, i.e. The significance level. If the calculated
probability works out to be equal to or smaller than the α value in case of one-tailed test, then the
null hypothesis is to be rejected. On the other hand, if the calculated probability is greater, then
the null hypothesis is to be accepted. In case the null hypothesis H0 is rejected, the researcher
runs the risk of committing the Type I error. But, if the null hypothesis H0 is accepted, then it
involves some risk (which cannot be specified in size as long as H0 is vague and not specific) of
committing the Type II error.

Step 4. RESEARCH DESIGN

There are different types of research designs. They may be broadly categorized as:
 Exploratory Research Design;
 Descriptive and Diagnostic Research Design; and
 Hypothesis-Testing Research Design.

1. Exploratory Research Design

The Exploratory Research Design is known as formulative research design. The main objective
of using such a research design is to formulate a research problem for an in-depth or more
precise investigation, or for developing a working hypothesis from an operational aspect. The
major purpose of such studies is the discovery of ideas and insights. Therefore, such a research
design suitable for such a study should be flexible enough to provide opportunity for considering
different dimensions of the problem under study. The in-built flexibility in research design is
required as the initial research problem would be transformed into a more precise one in the
exploratory study, which in turn may necessitate changes in the research procedure for collecting
relevant data.
Usually, the following three methods are considered in the context of a research design for such
studies. They are
(a) a survey of related literature;
(b) experience survey; and
(c) analysis of ‘insight-stimulating’ instances.

2. Descriptive And Diagnostic Research Design

A Descriptive Research Design is concerned with describing the characteristics of a particular

individual or a group. Meanwhile, a diagnostic research design determines the frequency with
which a variable occurs or its relationship with another variable. In other words, the study
analyzing whether a certain variable is associated with another comprises a diagnostic research
study. On the other hand, a study that is concerned with specific predictions or with the narration
of facts and characteristics related to an individual, group or situation, are instances of
descriptive research studies. Generally, most of the social research design falls under this
category. As a research design, both the descriptive and diagnostic studies share common
requirements, hence they are grouped together. However, the procedure to be used and the
research design need to planned carefully. The research design must also make appropriate
provision for protection against bias and thus maximize reliability, with due regard to the
completion of the research study in an economical manner. The research design in such studies
should be rigid and not flexible. Besides, it must also focus attention on the following:

a) Formulation of the objectives of the study

b) Proper designing of the methods of data collection
c) Sample selection
d) Data collection
e) Processing and analysis of the collected data, and
f) Reporting the findings.

3. Hypothesis-Testing Research Design

Hypothesis-Testing Research Designs are those in which the researcher tests the hypothesis of
causal relationship between two or more variables. These studies require procedures that would
not only decrease bias and enhance reliability, but also facilitate deriving inferences about the
causality. Generally, experiments satisfy such requirements. Hence, when research design is
discussed in such studies, it often refers to the design of experiments.

Characteristics of good Research Design

A good research design often possesses the qualities of being flexible, suitable, efficient, economical
and so on. Generally, a research design which minimizes bias and maximizes the reliability of the
data collected and analysed is considered a good design (Kothari 1988). A research design which
does not allow even the smallest experimental error is said to be the best design for investigation.
Further, a research design that yields maximum information and provides an opportunity of viewing
the various dimensions of a research problem is considered to be the most appropriate and efficient
design. Thus, the question of a good design relates to the purpose or objective and nature of the
research problem studied. While a research design may be good, it may not be equally suitable to all
studies. In other words, it may be lacking in one aspect or the other in the case of some other research
problems. Therefore, no single research design can be applied to all types of research problems. A
research design suitable for a specific research problem would usually involve the following
considerations:
i. The methods of gathering the information;
ii. The skills and availability of the researcher and his/her staff, if any;
iii. The objectives of the research problem being studied;
iv. The nature of the research problem being studied; and
v. The available monetary support and duration of time for the research work.

Various principles of Research Design.

 The Principle of Replication

 The Principle of Randomization
 The Principle of Local Control

1. The Principle Of Replication: According to this principle, the experiment should be repeated
more than once. Thus, each treatment is applied in many experimental units instead of one. This
way the statistical accuracy of the experiments is increased. For example, suppose we are going
to examine the effect of two varieties of wheat. Accordingly, we divide the field into two parts
and grow one variety in one part and the other variety in the other. Then we compare the yield of
the two parts and draw conclusion on that basis. But if we are to apply the principle of
replication to this experiment, then we first divide the field into several parts, grow one variety in
half of these parts and the other variety in the remaining parts. Then we collect the data of yield
of the two varieties and draw conclusion by comparing the same. The result so obtained will be
more reliable in comparison to the conclusion we draw without applying the principle of
replication. The entire experiment can be repeated several times for better results.

2. The Principle Of Randomization: When we conduct an experiment, the principle of

randomization provides us a protection against the effects of extraneous factors. This means that this
principle indicates that the researcher should design or plan the experiment in such a way that the
variations caused by extraneous factors can all be combined under the general heading of ‘chance’.
For example, when a researcher grows one variety of wheat , say , in the first half of the parts of a
field and the other variety he grows in the other half, then it is just possible that the soil fertility may
be different in the first half in comparison to the other half. If this is so the researcher’s result is not
realistic. In this situation, he may assign the variety of wheat to be grown in different parts of the
field on the basis of some random sampling technique i.e., he may apply randomization principle and
protect himself against the effects of the extraneous factors. Therefore, by using the principle of
randomization, he can draw a better estimate of the experimental error [4].

3. The Principle Of Local Control: This is another important principle of experimental designs.
Under this principle, the extraneous factor which is the known source of variability is made to
vary deliberately over as wide a range as necessary. This needs to be done in such a way that the
variability it causes can be measured and hence eliminated from the experimental error. The
experiment should be planned in such a way that the researcher can perform a two-way analysis
of variance, in which the total variability of the data is divided into three components attributed
to treatments (varieties of wheat in this case), the extraneous factor (soil fertility in this case) and
experimental error. In short, through the principle of local control we can eliminate the
variability due to extraneous factors from the experimental error.

Step 5. Primary Data Collection Method

Primary data may be obtained by applying any of the following methods:

1. Direct Personal Interviews.

2. Indirect Oral Interviews.
3. Information from Correspondents.
4. Mailed Questionnaire Methods.
5. Schedule Sent Through Enumerators.

1. Direct Personal Interviews

A face to face contact is made with the informants (persons from whom the information is to be
obtained) under this method of collecting data. The interviewer asks them questions pertaining to the
survey and collects the desired information. Thus, if a person wants to collect data about the working
conditions of the workers of the Tata Iron and Steel Company, Jamshedpur, he would go to the
factory, contact the workers and obtain the desired information. The information collected in this
manner is first hand and also original in character.

The information collected through this method is normally more accurate because interviewer
can clear doubts of the informants about certain questions and thus obtain correct information. In
case the interviewer apprehends that the informant is not giving accurate information, he may
cross-examine him and thereby try to obtain the information.

2. Indirect Oral Interviews

Under this method of data collection, the investigator contacts third parties generally called
‘witnesses’ who are capable of supplying necessary information. This method is generally
adopted when the information to be obtained is of a complex nature and informants are not
inclined to respond if approached directly. For example, when the researcher is trying to obtain
data on drug addiction or the habit of taking liquor, there is high probability that the addicted
person will not provide the desired data and hence will disturb the whole research process.

3. Mailed Questionnaire Method

Under this method, a list of questions pertaining to the survey which is known as ‘Questionnaire’
is prepared and sent to the various informants by post. Sometimes the researcher himself too
contacts the respondents and gets the responses related to various questions in the questionnaire.

SAMPLING DESIGN
A researcher should take into consideration the following aspects while developing a sample
design:
1. Type Of Universe: The first step involved in developing sample design is to clearly define the
number of cases, technically known as the universe. A universe may be finite or infinite. In a
finite universe the number of items is certain, whereas in the case of an infinite universe the
number of items is infinite (i.e., there is no idea about the total number of items). For example,
while the population of a city or the number of workers in a factory comprise finite universes, the
number of stars in the sky, or throwing of a dice represent infinite universe.
2. Sampling Unit: Prior to selecting a sample, decision has to be made about the sampling unit.
A sampling unit may be a geographical area like a state, district, village, etc., or a social unit like
a family, religious community, school, etc., or it may also be an individual. At times, the
researcher would have to choose one or more of such units for his/her study.
3. Source List: Source list is also known as the ‘sampling frame’, from which the sample is to be
selected. The source list consists of names of all the items of a universe. The researcher has to
prepare a source list when it is not available. The source list must be reliable, comprehensive,
correct, and appropriate. It is important that the source list should be as representative of the
population as possible.
4. Size Of Sample: Size of the sample refers to the number of items to be chosen from the universe
to form a sample. For a researcher, this constitutes a major problem. The size of sample must be
optimum. An optimum sample may be defined as the one that satisfies the requirements of
representativeness, flexibility, efficiency, and reliability. While deciding the size of sample, a
researcher should determine the desired precision and the acceptable confidence level for the
estimate. The size of the population variance should be considered, because in the case of a larger
variance generally a larger sample is required. The size of the population should be considered as it
also limits the sample size. The parameters of interest in a research study should also be considered,
while deciding the sample size. Besides, costs or budgetary constraint also plays a crucial role in
deciding the sample size [1].

(a) Parameters Of Interest: The specific population parameters of interest should also be
considered while determining the sample design. For example, the researcher may want to make an
estimate of the proportion of persons with certain characteristic in the population, or may be
interested in knowing some average regarding the population. The population may also consist of
important sub-groups about whom the researcher would like to make estimates. All such factors have
strong impact on the sample design the researcher selects.

(b) Budgetary Constraint: From the practical point of view, cost considerations exercise a major
influence on the decisions related to not only the sample size, but also on the type of sample selected.
Thus, budgetary constraint could also lead to the adoption of a non-probability sample design.

(c) Sampling Procedure: Finally, the researcher should decide the type of sample or the technique
to be adopted for selecting the items for a sample. This technique or procedure itself may represent
the sample design. There are different sample designs from which a researcher should select one for
his/her study. It is clear that the researcher should select that design which, for a given sample size
and budget constraint, involves a smaller error.

Types Of Sample Designs

Sample designs may be classified into different categories based on two factors, namely, the
representation basis and the element selection technique. Under the representation basis, the
sample may be classified as:
I. Non-probability sampling
II. Probability sampling While probability sampling is based on random selection, the
nonprobability sampling is based on ‘non-random’ selection of samples.

I. Non-Probability Sampling: Non-probability sampling is the sampling procedure that does not
afford any basis for estimating the probability that each item in the population would have an
equal chance of being included in the sample. Non-probability sampling is also known as
deliberate sampling, judgment sampling and purposive sampling. Under this type of sampling,
the items for the sample are deliberately chosen by the researcher; and his/her choice concerning
the choice of items remains supreme. In other words, under non-probability sampling the
researchers select a particular unit of the universe for forming a sample on the basis that the
small number that is thus selected out of a huge one would be typical or representative of the
whole population. For example, to study the economic conditions of people living in a state, a
few towns or village may be purposively selected for an intensive study based on the principle
that they are representative of the entire state. In such a case, the judgment of the researcher of
the study assumes prime importance in this sampling design. Quota Sampling: Quota sampling is
also an example of non-probability sampling. Under this sampling, the researchers simply
assume quotas to be filled from different strata, with certain restrictions imposed on how they
should be selected. This type of sampling is very convenient and is relatively less expensive.
However, the samples selected using this method certainly do not satisfy the characteristics of
random samples. They are essentially judgment samples and inferences drawn based on that,
would not be amenable to statistical treatment in a formal way [3].

II. Probability Sampling: Probability sampling is also known as ‘choice sampling’ or ‘random
sampling’. Under this sampling design, every item of the universe has an equal chance of being
included in the sample. In a way, it is a lottery method under which individual units are selected
from the whole group, not deliberately, but by using some mechanical process. Therefore, only
chance would determine whether an item or the other would be included in the sample or not.
The results obtained from probability or random sampling would be assured in terms of
probability. That is, the researcher can measure the errors of estimation or the significance of
results obtained from the random sample. This is the superiority of random sampling design over
the deliberate sampling design. Random sampling satisfies the law of statistical regularity,
according to which if on an average the sample chosen is random, then it would have the same
composition and characteristics of the universe. This is the reason why the random sampling
method is considered the best technique of choosing a representative sample.
Step 6: Carry out the Research Process

While the research design is decided, then the researcher collects data, records information.

The researcher proceeds with the research. Practical difficulties may arise in this stage. For
example, the research method may not suit properly. The interviewer might be unwilling to let
carry out the research as planned. Moreover, a false interpretation could potentially bias the
result of the study. So, when you collect data, you need to know the effective techniques of data
collection in order to gather necessary and relevant information with regard to research [2].

Step 7: Preparing Research Results

Now work out the implications of the data you gathered. Your challenges are not over yet.
Rather problems might just begin! It is hardly easy to clear out the implications of the gathered
materials. While it is possible to clarify the research questions, some investigations are less
conclusive. So, interpret your research results in order to report the findings.

No matter what kind of research you are doing, there comes a moment when your head is full of
ideas that originated from your analysis. Ideally, you’ll write them down as they come to you.
Now you need to convert the mass of those elements and ideas into a written text that makes
sense to the reader and can do justice to your quest.

Step 8: Reporting Research Findings

The final step of the research process outline is to report the research findings. Describe the
significance of the research study. Work out how do they relate to the previous research findings.
Usually, the research report published as a journal article or book. This is the last stage in terms
of the individual research project. Mostly, a research report discusses questions that remained
unanswered & suggest further research in the future in general.

This also signifies how do you write your research paper. You must write your research findings
in a proper way. So, I do suggest going through Research Report Writing Steps with Format.
REFERENCES:

[1]. Singh, A . (2021). Data Science and Human Behaviour Interpretation and Transformation . Journal of Learning
and Teaching in Digital Age , 6 (1) , 1-7 .

[2]. Singh, A. (2021). Communication Coroutines For Parallel Program Using DW26010 Many Core Processor,
Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics , vol. 3, no. 1, pp. 15-20,
Retrieved from DOI: https://doi.org/10.35882/ijeeemi.v3i1.3

[3]. Singh, AK (2020). Applications of IoT in Agricultural System. Acad. Res. J. Agri. Sci. Res. 8(5): 485-491

[4]. Singh, A. (2019). Data Publishing Techniques and Privacy Preserving. International Journal for Information
Security Research (IJISR), Volume 9, Issue 3, pp 881-890.

[5]. Singh A (2019) Architecture of data lake. Int J Sci Res Comput Sci Eng Inf Technol 5(2):411-414.

[6]. Singh, Ajit, Enabling Researchers to Make Their Data Count (March 24, 2019). Available at SSRN:
http://dx.doi.org/10.2139/ssrn.3359161

[7]. Singh, Ajit, Best Approach to Read a Scientific Article (April 16, 2019). Available at SSRN:
http://dx.doi.org/10.2139/ssrn.3372784

[8]. Singh, Ajit, Implementation of the IoT and Cloud Technologies in Education System (May 3, 2019). Available at
SSRN: http://dx.doi.org/10.2139/ssrn.3382475

[9]. Singh, Ajit, Writing Research Proposal for MS/MPHIL/PhD Program (February 9, 2021). Available at SSRN:
http://dx.doi.org/10.2139/ssrn.3782344

[10]. Singh, Ajit, Significant Study of Qualitative Research In Health Care (February 18, 2021).
https://sciforum.net/paper/view/conference/9234, Available at SSRN: https://ssrn.com/abstract=3788090

[11]. Singh, Ajit, An Introduction to Experimental and Exploratory Research (February 20, 2021). Available at SSRN:
https://ssrn.com/abstract=3789360 or http://dx.doi.org/10.2139/ssrn.3789360

[12]. Singh, Ajit, IoT Data Analytics (June 18, 2019). Available at SSRN: https://ssrn.com/abstract=3406041 or
http://dx.doi.org/10.2139/ssrn.3406041

[13]. Singh, Ajit, SMART CITY With IOT and BIG Data (June 18, 2019). Available at SSRN:
https://ssrn.com/abstract=3405839 or http://dx.doi.org/10.2139/ssrn.3405839

[14]. Singh, Ajit, The IoT Applications and Consideration for NoSQL Database (June 5, 2019). Available at SSRN:
https://ssrn.com/abstract=3399649 or http://dx.doi.org/10.2139/ssrn.3399649

[15]. Singh, Ajit, Applications of IoT in Agricultural System (May 31, 2019). Available at SSRN:
https://ssrn.com/abstract=3397022 or http://dx.doi.org/10.2139/ssrn.3397022

[16]. Singh, Ajit, Implementation of the IoT and Cloud Technologies in Education System (May 3, 2019). Available at
SSRN: https://ssrn.com/abstract=3382475 or http://dx.doi.org/10.2139/ssrn.3382475
 [17]. Singh, Ajit, The Internet of Things (IoT) and Cyber Security (June 5, 2019). Available at SSRN:
https://ssrn.com/abstract=3399641 or http://dx.doi.org/10.2139/ssrn.3399641

[18]. Singh, Ajit, The IoT Applications and Consideration for NoSQL Database (June 5, 2019). Available at SSRN:
https://ssrn.com/abstract=3399649 or http://dx.doi.org/10.2139/ssrn.3399649

[19]. Singh, Ajit, SMART CITY With IOT and BIG Data (June 18, 2019). Available at SSRN:
https://ssrn.com/abstract=3405839 or http://dx.doi.org/10.2139/ssrn.3405839

[20]. Singh, Ajit, Significance of NoSQL Databases with the Internet of Things (June 10, 2019). Available at SSRN:
https://ssrn.com/abstract=3401821 or http://dx.doi.org/10.2139/ssrn.3401821

View publication stats