Alarm Num

Alarm Na Alarm GroEvent TypDefault SeMeaning

4082 SW fallbacSBTS FCT FCT 4082:
4083 SW fallbacSBTS FCT FCT Source
4082: unit has reached the maximum number of reset attempts, that is
4085 SW fallbacSBTS FCT FCT Source
4082: unit has reached the maximum number of reset attempts, that is
4090 Cell power SBTS FCT AxC TX carTSource unitModule
he Radio has reached the maximum
has detected low TXnumber of reset
power from the attempts, thatMo
Flexi System is
4114 SynchronizSBTS FCT FCT Synchronization is lost when the system module is working as a synchro
4122 GPS receive SBTS FCT GNSS The fault indicates poor GPS antenna installation.
4123 GPS receive SBTS FCT GNSS The GPS receiver is running a site/self survey.
4124 GPS receive SBTS FCT GNSS There is no accurate position stored in the EEPROM.
4125 GPS receive SBTS FCT GNSS The receiver is used in the stored position but has been moved to a new
4126 GPS receivSBTS FCT GNSS The GPS receiver has detected that one or more EEPROM segments ha
4145 Validation oSBTS FCT FCT SW file validation against its signature failed.
4153 Reference S c BTS FCT FCT Phase synchronization has been commissioned at the btsSyncMode, bu
4208 Unit initiali SBTS FCT FCT TRS IP configuring or re-configuring by RROM has failed.
4210 External GP SBTS FCT GNSS External GPS/GNSS receiver module has lost satellite visibility and and i
4231 Internal baSBTS FCT FSP FSM-internal (including DSP expansion cards) baseband bus link synchr
4235 <parameterSBTS FCT Antenna li VSWR major or VSWR minor value set is out of range during commissio
4266 Failure to SBTS FCT FCT There has been a failure to validate the software release signature for th
4267 Failure to SBTS FCT FCT There has been a failure to validate the hash of the questioned SW files
4268 Unsigned sSBTS FCT FCT An unsigned software release has been downloaded to a BTS system m
4269 Failure to SBTS FCT FCT There has been a failure to validate the software signature for the softwa
4270 MHA in by SBTS AISG MHAAISG MHAMHA was unexpectedly set to by-pass mode.
4285 HSDPA user SBTS FSM RAT Not enough #data users licenses is available in Centralized SW License
4286 HSUPA user SBTS FSM RAT Not enough #data users licenses is available in Centralized SW License
4287 LTE users S l BTS FSM RAT Not enough #data users licenses is available in Centralized SW License
4293 IP traffic c SBTS SBTS: FS SBTS: CAPLIM
Licenses are missing since the time ($T) indicated in the fault name. The
4294 SBTS resetSBTS FCT FBB Baseband extension module is inserted into a working SBTS. Manual SB
4297 NTP ServerSBTS FCT TIME Certain NTP server indicate problems with the connections.
4298 ToP refereSBTS FCT FCT Timing over packet is unavailable or usable as a clock source.
4299 Synchronou SBTS FCT FCT Synchronous Ethernet is not available or usable as clock source.
4300 PDH refereSBTS FCT FCT PDH is not available or usable as clock source.
4304 Too long fi SBTS FCT OptIF The used cable between the system module and the radio module excee
4308 Micro DTX SBTSc FSM FR Micro DTX configuration in a radio module has failed.
mber of reset attempts, that is the source unit cannot successfully finish start-up after the SW update.
mber of reset attempts, that is the source unit cannot successfully finish start-up after the SW update.
mberfrom
ower of reset
the attempts, thatModule.
Flexi System is the source
Thereunit
is acannot
failure successfully finish
in the downlink start-up after
transmission the SW update.
path.
odule is working as a synchronization slave system module. This usually indicates that a synchronization master system module has been

but has been moved to a new position.

r more EEPROM segments have been found to be corrupted at reset and had to be set to their factory default settings.

ioned at the btsSyncMode, but PPS and/or ToP reference clock has not become available during timeout, that is, PPS and/or ToP referenc
ROM has failed.
lost satellite visibility and and is currently operating in holdover mode.
rds) baseband bus link synchronization has failed. Frame sync state has not been reached, or link timing is incorrect.
out of range during commissioning.
ftware release signature for the software release that has just been requested to be downloaded to the BTS system module because the in
sh of the questioned SW files for FCT except of Hash Container file or Hash Container Signature file in the software release that has just be
ownloaded to a BTS system module that is currently running a software release that implements software signature checking.
ftware signature for the software release that has been requested to be downloaded to the BTS system module because there is no softwa

ble in Centralized SW License Server. Parameters BTSSCW/numberOfHSDPASet1, BTSSCW/numberOfHSDPASet2, BTSSCW/numberOf

ble in Centralized SW License Server. Parameter BTSSCW/numberOfHSUPASet1 is to be reduced internally.
ble in Centralized SW License Server. # LTE users is not reduced.
ndicated in the fault name. The IP traffic is throttled to the peak rate ($R), at the level ($L) indicated in the fault name. Level denotes a per
o a working SBTS. Manual SBTS reset is required to activate and use this unit.
the connections.
e as a clock source.
sable as clock source.

le and the radio module exceeds the maximal supported length for Micro DTX (max supported link delay 80us, if the radio module is directl
ster system module has been reset or that there is a problem with the optical cable between the master system module and the slave syste

at is, PPS and/or ToP reference clock has been missing during startup.

system module because the information of either Hash Container file or Hash Container Signature file is not present in the downloaded Targ
oftware release that has just been requested to be downloaded to the BTS system module because the hash value of the questioned SW fi
nature checking.
ule because there is no software signature for the release, and only signed software can be installed.

DPASet2, BTSSCW/numberOfHSDPASet3 are to be reduced internally.

lt name. Level denotes a per cent of the maximum IP traffic throughput in a 15-minutes interval before the fault has been raised. For every

s, if the radio module is directly connected to system module or extension baseband module, the longest supported cable length is approx 1
em module and the slave system module.

resent in the downloaded TargetBD.xml, or the verification of the software signature files has failed.
value of the questioned SW file is missing, or SiteOAM fails to verify the hash of the questioned SW file.

ult has been raised. For every expiry of seven days (after missing licenses have been detected) at time($T), the level ($L) decreases by 5%

ported cable length is approx 16 km). eNB power saving, i.e. micro DTX functionality can't be provided any more.
the level ($L) decreases by 5%. When the level ($L) changes then a new alarm is raised.