hange E hange E
XC di XC di
F- t F- t
Product Data Sheet
PD
PD
or
or
!
!
W
W
O
O
N
N
Y
Y
U
U
B
B
to
to
k
k
CRAYSEAL 32-17
lic
lic
ww
ww
om
om
C
C
w c w c
.p
d f- x e. .p
d f- x e.
chang chang
Product Description:
Cray seal 32-17 is an aqua based, Anti-fungal sealant for low, medium and high pressure or high velocity
– metal, fiberglass and flexible heating and air conditioning air ducts, forming a durable seal against air
leakage.
Appication
HVAC Application
It is also used as an adhesive to metal, aluminum, Ceramic, Concrete, mild steel, etc.
Conforms to ASTM C-411 (Hot Surface Performance of High Temperature Thermal Insulation)
Conforms to ASTM C-732 (Aging Effects of Artificial Weathering on Latex Sealants)
Conforms to ASTM D-2202 (Slump Test)
It does not contain Asbestos, Lead or Mercury compounds
It can be applied using a wide variety of power extrusion equipment suitable for use with water
base sealant.
Advantages
Non-Flammable
Excellent adhesion & High strength
Highly resistance to extreme temperature changes and aging.
Suitable to Middle East climatic conditions
Excellent anti fungal property
Highly Elastic
Resistance to oil or grease
Mildly resistance to diluted alkalis and acids
Direction For Use
The surface should be clean, dry, oil-free and sounded (To clean surface use power blower). Apply by
power extrusion or trowel uniformly a 2” wide coat over the joint @ 2 to 2.2 gal/100 ft2. Total coverage
40-55 ft2/gal. Allow the completed joint to dry at least 24 hours above 25°C before pressure testing. High
humidity (70%) and or cooler temp. may retard drying. Total WFT to be 30-35 mils.
Storage
Store under cover, protect from direct sunlight and high temperature ( > 30°C).
Shelf life is up to 12 months in unopened container when stored as directed.
Technical Specification
Base Synthetic resin
Color White / Grey
Appearance Smooth paste
Density, kg/L 1.65 -1.75
Viscosity Flow (ASTM C 639) Non- Sag
Service Temperature, °C + 5 °C - +85°C
Bead Consistency Non-Sag bead free of air bubbles
Cleaning Clean all tools with warm water & soap when wet. Mineral spirit when dry.
www.focusair.net
hange E hange E
XC di XC di
F- t F- t
PD
PD
PRODUCT DATA SHEET
or
or
!
!
W
W
O
O
N
N
Y
Y
U
U
B
B
to
to
k
k
lic
lic
ww
ww
om
om
C
C
w c w c
.p
d f- x e. .p
d f- x e.
chang chang
Health and Safety
As with all chemicals, caution should always be exercised. Protective clothing such as gloves and goggles should be worn.
INHALATION: Inhalation of vapor or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis,
shortness of breath, headache, nausea, and vomiting. Immediately shift the victim to fresh air, and, if needed immediately start
artificial respiration. Give oxygen if breathing is labored. Get emergency medical help.
EYE CONTACT: Flush eyes with water for 15 minutes and call for medical help.
INGESTION: Causes nausea, vomiting, and loss of consciousness. If accidentally swallowed do not induce vomiting rather call for
medical help immediately.
SKIN CONTACT: Flush with water or soap and water until all traces have been removed. Seek medical attention if required.
WARRANTY
The information given is based on our knowledge and performance of the material. Every precaution is taken in the manufacture
of the product and responsibility is limited to the quality of supplies with no guarantee of results in the field, as manufacturer has
no control over site conditions or execution of work.
An ISO 9001 : 2008 Certified Company
P.O. Box 37945,
DUBAI
United Arab Emirates
www.focusair.net
hange E hange E
XC di XC di
F- t F- t
Product Data Sheet
PD
PD
or
or
!
!
W
W
O
O
N
N
Y
Y
U
U
B
B
to
to
k
k
CRAYCOAT 30-36 AF
lic
lic
ww
ww
om
om
C
C
w c w c
.p
d f- x e. .p
d f- x e.
chang chang
Product Description:
Craycoat 30-36 AF is a flexible adhesive and coating, forming a durable seal against air leakage. It can be
used where the humidity level had to be sustained at or above 90%.
Appication
It can be applied easily by brush, roller and airless
Spray (please contact your equipment supplier followed by product viscosity mention in data).
It has excellent water, chemical, abrasion and U.V resistance.
Recommend to be used on metal duct in outdoors and
indoors thermal insulation systems.
Can be use as atop coat of normal coating to protect from fungal.
Advantages
Good Adhesion.
Water resistance
Non-toxic & non-flammable.
UV Resistance.
Chemical Resistance
Antifungal & Antibacterial.
Suitable to Middle East climatic condition.
Direction For Use
The surface should be clean, dry, and free from oil, grease and loose particle. Apply a tack coat of adhesive
@ 3- 5 m2/li. After applying tack coat immediately imbed the selected lagging fabric smoothly in to the
wet coating. Apply two finish coat of adhesive @ 4 - 5 m2/li. It is very important to ensure that each coat
of adhesive is totally cured before the next coat is applied. The dry film thickness will vary with fabric
selected.
Storage
Store under cover, protect from direct sunlight and high temperature (> 35°C).
Shelf life is up to 12 months in unopened container when stored as directed.
Technical Specification
Base Selective Synthetic resin
Appearance Thixotropic like paste
Solid Content, % @ 150°C, 30 mins 59 - 65
Viscosity, Cps @25ºC, S6, rpm 20 22,000 - 36,000
Density, kg/L 1.64 – 1.72
Coverage, m2/L @ 150 – 210 DFT 3.0 – 5.0
Bonding Time, min @20°C,50% RH 45
Drying Time, hr As per ASTM D 1640-03 3–5
Service Temp, °C Up to 100
www.focusindustries.net
hange E hange E
XC di XC di
F- t F- t
PD
PD
PRODUCT DATA SHEET
or
or
!
!
W
W
O
O
N
N
Y
Y
U
U
B
B
to
to
k
k
lic
lic
ww
ww
om
om
C
C
w c w c
.p
d f- x e. .p
d f- x e.
chang chang
Health and Safety
As with all chemicals, caution should always be exercised. Protective clothing such as gloves and goggles should be worn.
INHALATION: Inhalation of vapor or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and
shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air, and, if needed immediately start artificial
respiration. Give oxygen if breathing is labored. Get emergency medical help.
EYE CONTACT: Flush eyes with water for 15 minutes and call for medical help.
INGESTION: Causes nausea, vomiting, and loss of consciousness. If accidentally swallowed do not induce vomiting rather call for
medical help immediately.
SKIN CONTACT: Flush with water or soap and water until all traces have been removed. Seek medical attention if required.
WARRANTY
The information given is based on our knowledge and performance of the material. Every precaution is taken in the manufacture of the
product and responsibility is limited to the quality of supplies with no guarantee of results in the field, as manufacturer has no control
over site conditions or execution of work.
Focus Industries LLC
New Industrial Area
Umm Al Thuoob - Umm Al Quawain
United Arab Emirates
www.focusindustries.net
hange E hange E
XC di XC di
F- t F- t
Product Data Sheet
PD
PD
or
or
!
!
W
W
O
O
N
N
Y
Y
U
U
B
B
to
to
k
k
CRAYBOND 81-10
lic
lic
ww
ww
om
om
C
C
w c w c
.p
d f- x e. .p
d f- x e.
chang chang
Product Description:
Craybond 81-10 is an inflammable, one component adhesive based on synthetic modified rubber with
special tackifier and additives.
Appication
Ideal for use in applications where fiber glass and other type of insulation are bonded to the interior or
exterior of metal duct system
It can be used for most porous & non-porous surfaces
It can be applied easily by brush, roller & pressure feeding equipment evenly on both surfaces
Advantages
Excellent bonding strength
Excellent water & alkali resistance
Good chemical resistant
Excellent heat resistant
Suitable for Middle East climate conditions
Direction For Use
The surface should be clean, dry, and free from oil, grease and loose particles. For fibrous wool & GI sheet,
apply adhesive evenly with any suitable equipment and wait for 5 to 10 minutes before bonding the glass
wool. For other substrates, after applying the adhesive wait until solvent is fully evaporated and assemble
the surface by applying normal hand pressure.
Storage
Store under covered area, protect from direct sunlight and high temperature (> 35°C)
Shelf life is up to 12 months in unopened container when stored as directed.
Technical Specification
Base Synthetic rubber
Color Green, Yellow and Amber Red
Viscosity, Cps @25ºC, S 3, rpm 20 300 - 700
Solid Content, % @110°C, 2 hrs 38 ± 3
Density, kg/L 0.87 – 0.93
Coverage, m2/L Per coat 4.9 – 7.0
Flash Point, °C < 10
Service Temp, °C -20 to +90
Open Time, min 5 - 20
Solubility Aromatic Solvent
Cleaning Clean all tools immediately with aromatic solvent
www.focusair.net
hange E hange E
XC di XC di
F- t F- t
PD
PD
PRODUCT DATA SHEET
or
or
!
!
W
W
O
O
N
N
Y
Y
U
U
B
B
to
to
k
k
lic
lic
ww
ww
om
om
C
C
w c w c
.p
d f- x e. .p
d f- x e.
chang chang
Health and Safety
As with all chemicals, caution should always be exercised. Protective clothing such as gloves and goggles should be worn.
INHALATION: Inhalation of vapor or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and
shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air, and, if needed immediately start artificial
respiration. Give oxygen if breathing is labored. Get emergency medical help.
EYE CONTACT: Flush eyes with water for 15 minutes and call for medical help.
INGESTION: Causes nausea, vomiting, and loss of consciousness. If accidentally swallowed do not induce vomiting rather call for
medical help immediately.
SKIN CONTACT: Flush with water or soap and water until all traces have been removed. Seek medical attention if required.
WARRANTY
The information given is based on our knowledge and performance of the material. Every precaution is taken in the manufacture
of the product and responsibility is limited to the quality of supplies with no guarantee of results in the field, as manufacturer has
no control over site conditions or execution of work.
An ISO 9001 : 2008 Certified Company
P.O. Box 37945,
DUBAI
United Arab Emirates
www.focusair.net
