Scribd
Upload
14 views4 pages

5415R 馬達 Hall Sensor

The SS552MT is a magnetoresistive position sensor designed for low gauss operation with a sensing distance of over one inch. It features a digital current sinking output, omnipolar functionality, and is suitable for various applications such as cylinder position sensing and elevator sensors. The sensor is provided in a surface-mount package for automated assembly and operates effectively in a wide temperature range.

Uploaded by

weisan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views4 pages

5415R 馬達 Hall Sensor

The SS552MT is a magnetoresistive position sensor designed for low gauss operation with a sensing distance of over one inch. It features a digital current sinking output, omnipolar functionality, and is suitable for various applications such as cylinder position sensing and elevator sensors. The sensor is provided in a surface-mount package for automated assembly and operates effectively in a wide temperature range.

Uploaded by

weisan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Magnetoresistive Position Sensors

SS552MT Surface Mount Sensor SS552MT Series


FEATURES
• Low gauss operation can
extend sensing distance to
one inch or more,
depending upon size
• Digital current sinking
output
• Omnipolar – can be
operated with either north
or south magnetic pole
• 0 kHz to over 100 kHz SS552MT is a digital position sensor in an SOT-89 style surface-mount
operating speed package with omnipolar magnetic action. The sensor has magnetoresistive
• Surface-mount package material integrated on silicon and encapsulated in a plastic package. The
allows automated, lower integrated circuit provides a digital output in response to very low magnetic
cost assembly fields. Though this signal is identical to our digital Hall effect sensors, it can
• Small size be achieved by magneto-resistive sensors at much greater sensor-to-
magnet distances.

Surface-mount packages are mounted directly on the electrical traces on the


TYPICAL APPLICATIONS PC board and attached by an automatic solder reflow operation which
• Cylinder position sensing requires no holes, so it reduces the cost of the PC board. These packages
in pneumatic cylinders are supplied on tape and reel and can be automatically placed on PC boards
• Elevator sensor by use of pick-and-place equipment.
• Lid sensor for laptop
SS552MT Series is operated by magnetic fields (North or South) parallel to
computers
the sensor package.
• Position sensor for material
handling equipment
NOTE: Due to the inherent high sensitivity of these sensors, stray magnetic
• Geartooth sensor for fields which are parallel to the IC may affect operation.
industrial or automotive
applications

WARNING WARNING
PERSONAL INJURY
MISUSE OF DOCUMENTATION
DO NOT USE these
products as safety or • The information presented in this product sheet is for reference only. Do
emergency stop devices or not use this document as a product installation guide.
in any other application • Complete installation, operation, and maintenance information is provided
where failure of the product in the instructions supplied with each product.
could result in personal Failure to comply with these instructions could result in death or
injury. serious injury.
Failure to comply with
these instructions could
result in death or serious
injury.

Sensing and Control


Magnetoresistive Position Sensors
SS552MT Surface Mount Sensor SS552MT Series

ELECTRICAL SPECIFICATIONS over 3.8 Vdc to 30 Vdc and -40 °C to 150 °C [-40 °F to 302 °F]
unless otherwise noted
Min. Typ. Max. Remarks
Supply Current (without load) – 6 mA 11 mA Max. operated
at 25°C, with 16 V supply 10 mA Max. released
Supply Voltage 3.8 Vdc 30 Vdc
Output Voltage (operated) – 0.25 V 0.40 V Sinking 20 mA max.
Output Leakage Current (released) – 10 µA Leakage into sensor output
Output Switching Time Rise – 0.2 µs 1.5 µs 10% to 90%, 1600 Ω, 20 pF load
Fall 0.1 µs 1.5 µs 90% to 10%, 1600 Ω, 20 pF load

MAGNETIC CHARACTERISTICS OVER 3.8 TO 30 VDC SUPPLY VOLTAGE


Temperature Range Max. Operate Min. Release Max. Differential
-25 to 85°C [-13 to 185°F] 25 gauss 5 gauss 7 gauss
-40 to 150°C [-40 to 302°F] 25 gauss 4 gauss 8 gauss

ABSOLUTE MAXIMUM RATINGS* BLOCK DIAGRAM


Supply Voltage (Vs) -0.5 Vdc to 30 Vdc CURRENT SINKING OUTPUT (NPN)
Voltage Externally 30 Vdc max. (OFF cond. only)
Applied to Output -0.5 Vdc min. (OFF or ON
cond.)
Output ON Current 20 mA max.
Temperature -40 °C to 150 °C
[-40 °F to 302 °F]
Magnetic Flux No limit—circuit cannot be
damaged by magnetic
overdrive

*Absolute maximum ratings are the extreme limits


the device will withstand without damage to the
device. However, the electrical and mechanical
characteristics are not guaranteed as the maximum
limits (above recommended operating conditions) are
approached, nor will the device necessarily operate
at absolute maximum ratings.

2 Honeywell • Sensing and Control


Magnetoresistive Position Sensors
SS552MT Surface Mount Sensor SS552MT Series
MOUNTING DIMENSIONS

TAPE DIMENSIONS (for reference only) mm/in REEL DIMENSIONS (for reference only) mm/in

NOTE: This product is sold in tape and reel form only, per EIA STD
481. There are 1,000 parts per reel.

Honeywell • Sensing and Control 3


Magnetoresistive Position Sensors
SS552MT Surface Mount Sensor SS552MT Series
ORDER GUIDE
Part number Description
SS552MT Magnetoresistive surface mount sensor

WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as While we provide application assistance personally,
being free of defective materials and faulty through our literature and the Honeywell web site, it
workmanship. Contact your local sales office for is up to the customer to determine the suitability of
warranty information. If warranted goods are the product in the application.
returned to Honeywell during the period of coverage, For application assistance, current specifications, or
Honeywell will repair or replace without charge those name of the nearest Authorized Distributor, contact a
items it finds defective. The foregoing is Buyer’s nearby sales office. Or call:
sole remedy and is in lieu of all other warranties, 1-800-537-6945 USA
expressed or implied, including those of 1-800-737-3360 Canada
merchantability and fitness for a particular 1-815-235-6847 International
purpose. FAX
Specifications may change without notice. The 1-815-235-6545 USA
information we supply is believed to be accurate and INTERNET
reliable as of this printing. However, we assume no www.honeywell.com/sensing
responsibility for its use. [email protected]

Sensing and Control


Honeywell
11 West Spring Street
Freeport, Illinois 61032
005851-EN IL50 GLO 1103 Printed in USA
Copyright 2003 Honeywell International Inc. www.honeywell.com/sensing

You might also like