Directional valve with flow control function in normal position (07/2017)

Directional valve with flow control functionality

(WE42P06HMC1P)
Nominal size ISO 4401-03-02-0-05 (NB06/CETOP3)

General description
WE42P06HMC1 valves are directional valves with a flow control function when deenergized.

Advantages
• Maximum operating pressure: 350 bar
• When used as a pilot valve for a cartridge, the result is a very soft opening
characteristic combined with a very fast closing capability.
• Compact, cost-efficient design thanks to the integrated flow control function.
• Changing of the solenoid coil is fast, simple and possible without any oil contact.
• A single solenoid electrical connector according to ISO 4400
• Modular design allows for combinations with sandwich plates and DRE control covers.

WHAT MOVES YOUR WORLD Seite 1 MOOG

Notes
Technische Daten

WHAT MOVES YOUR WORLD Page 2 MOOG

Applications
Technische Daten

Applications
The WE42P06HMC1P valve can be used as both a primary flow control valve from P→T for
a maximum controlled flow of 4 L/min and as a pilot valve for cartridge control applications.

Pilot valve applications are possible when used in combination with a DRE control cover.
With the solenoid deenergized, the spring centered normal position results in a controlled
flow from P→T.

Depending upon the size of the orifice in the control spool an oil flow of 0,25 L/min to
approximately 4 L/min will be removed, independent of pressure, from the cartridge control
volume. This will result in a slow, controlled, constant velocity opening of the cartridge
element which will make a soft loading and unloading of the hydraulic system possible. An
example of an application using a soft unloading pilot valve is shown on page 6, Figure 3.

control spool orifice

Figure 1: Location of the control spool orifice

* DRE control covers available upon request

WHAT MOVES YOUR WORLD Page 3 MOOG

 Specifications
Technische Daten

General Data Value Units Specifications

Valve design - - Direct controlled spool valve
Mounting style - - Manifold mount
Mounting orientation - - preferably solenoid pointing down
Port sizing - - ISO 4401-03-02-0-05
min. °C -20
Ambient temperature range
max. °C +60
Weight m kg 1,6
Hydraulic
P,A,B MPa 35
Max. operating pressure
T MPa 21
Max. flow 30 (P→A or P→B)
Qmax L/min
4 (max. controlled P→T)
NBR: mineral oil based hydraulic fluids,
HFA-,HFB,HFC hydraulic fluids.
Seal material : Hydraulic fluid FKM: Mineral oil based hydraulic fluids;
- -
(NBR is standard) HFD hydraulic fluids
Seals for other hydraulic fluids available
upon request
min. °C -30 (NBR) / -10 (FKM)
Hydraulic fluid temperature range
max. °C +80 (NBR + FKM)
min. mm²/s 2,8
Viscosity range
max. mm²/s 380
Max. allowable contamination of the
Fluid cleanliness (ISO Code) - - hydraulic fluid according to ISO 4406 (C),
Class 20/18/15
Electric
Operating voltage DC V 24
Acceptable supply voltage
tolerance - % ±10
Max. switching frequency Cycles/h - 10.000
Duty cycle % 100
Lifetime-expectancy
- - 107
(number of switching cycles)
Protection class (EN 60529) - - IP 65
Solenoid connector plug - - ISO 4400 type connector plug
Solenoid type - - Solenoid switching in oil
Power consumption max. W 30
Max. solenoid coil temperature max. °C 155
On ms 30...50
Response time *
Off ms 30...100

* measured with a viscosity of ν = 32 mm²/s

WHAT MOVES YOUR WORLD Page 4 MOOG

Pressure-Flow
Technische Daten
Characteristics

Pressure - Flow characteristics

The WE42P06HMC1P directional valve can provide a pressure independent flow control of
up to 4 L/min depending on the size of the orifice in the control spool. Selection of the proper
orifice size for the flow desired can be done using Figure 2.
In addition to the pressure independent flow characteristics, Figure 2 demonstrates a further
advantage of this valve. In order to achieve a flow of approximately 2,5 L/min with a Δp=300
bar, a conventional orifice configuration would require a 0,6 mm orifice. With the directional
valve it is possible to achieve the same flow control using a 1,5 mm orifice in the control
spool. As a result of this larger orifice size, the entire hydraulic system is therefore less prone
to failure.

Figure 2: Control characteristics as a function of the control spool orifice size

WHAT MOVES YOUR WORLD Page 5 MOOG

Example
Technische
Application
Daten

Use as an unloading valve

Figure 3 shows an example of the directional valve
used as an unloading pilot valve in a cartridge
application. When used in combination with a
pressure limiting pilot valve and a DRE control cover
it is possible to achieve a very soft, pressure
independent, unloading without any loss of closing
speed. The soft unloading characteristic can be seen
in Figure 4.
In general, this directional valve can be used as a
pilot valve wherever a soft unloading characteristic is
desired.

Figure 3: Use as an unloading valve

Unloading function
Pressure unloading A →B in relation to control signal and time, measured at t = 45°C

Figure 4: Comparison of unloading characteristics

WHAT MOVES YOUR WORLD Page 6 MOOG

Mounting
Technische
Dimensions
Daten

4 mounting screws
ISO 4762-M5x30-12.9
Torque 8 Nm
Not included in delivery, please
refer to the accessories on page 10

Required surface
quality of the
mating part
Gegenstückes

Mounting surface according

to ISO 4401-03-02-0-05

WHAT MOVES YOUR WORLD Page 7 MOOG

Ordering
Technische
Information
Daten

N - W E 4 2 P 06 H MC1P B O B N 0 / ...

Seal material
Options
N NBR
V FKM K_ For example: K06 = 0,6 mm
orifice
in spool
Valve type
Electrical connector
W Directional valve
0 According to ISO 4400
(without mating plug)
Operation
E Directly controlled
Solenoid type

Number of ports N Wet solenoid with emergency

manual control
4 4 ports
O Wet solenoid without
emergency manual control
Number of positions
2 2 switching positions Solenoid operating voltage
B 24 VDC
Mounting
P Subplate Pilot oil supply
O None, direct operated
Nominal size
06 ISO 4401-03-02-0-05 Solenoid configuration
A A-side, spring centered spool
Series B B-side, spring centered spool
H Series
Function
Flow control function P T
MC1P
in normal position

WHAT MOVES YOUR WORLD Page 8 MOOG

Common Order
Technische Numbers
Daten

Order Number (NBR)

Type Code Order Number
without an orifice in the control spool
N-WE42P06HMC1PAOBN0/K99 X820-MC1PA-000N01
N-WE42P06HMC1PBOBN0/K99 X820-MC1PB-000N01
Ø 0,6 mm orifice in the control spool
N-WE42P06HMC1PAOBN0/K06 X820-MC1PA-002N01
N-WE42P06HMC1PBOBN0/K06 X820-MC1PB-001N01
Ø 0,8 mm orifice in the control spool
N-WE42P06HMC1PAOBN0/K08 X820-MC1PA-003N01
N-WE42P06HMC1PBOBN0/ K08 X820-MC1PB-002N01

*Please use Figure 2 on page 5 when selecting an orifice size. For mounting information and
order numbers see page 10.

Seal kit *
Pos. Qty. Description Order Number
- 1 Complete seal kit NBR (Pos.1+2) X820DMC_000N00
1 4 O-Ring NBR 9,25 x 1,78
2 2 O-Ring NBR 17,17 x 1,78

*Seal materials for other hydraulic fluid types available upon request

2 Figure 5: seal locations

WHAT MOVES YOUR WORLD Page 9 MOOG

Accessories
Technische Daten

Accessories
(must be ordered separately)
Pos. Description Order Number
Mounting screws ISO 4762-M5x30-12.9
1 X784-10514
Torque [Nm] 8 ±0,4
2 Plug X820 X784-94000

Available control spool orifices*

Orifice – metric ISO 4026-M5x5x0,6 X784-90506
Orifice – metric ISO 4026-M5x5x0,8 X784-90508
Orifice – metric ISO 4026-M5x5x1,0 X784-90510
3
Orifice – metric ISO 4026-M5x5x1,2 X784-90512
Orifice – metric ISO 4026-M5x5x1,5 X784-90515
Orifice – metric ISO 4026-M5x5x2,0 X784-90520

*additional orifices available upon request

Pos. 3
permanently secured
2,5 mm hex
Torque =2,5 ± 0,1 Nm

Pos. 2
Figure 6: accessory locations

WHAT MOVES YOUR WORLD Page 10 MOOG

Global support
Technische Daten

As a recognized leader in motion control

technologies, Moog offers a full range of services to
support our products and ensure that they meet the
expectations of customers. Moog experts are the
best at helping customers select the right products
and ensuring that they run reliably for a long time.

When it is time for new machine commissioning,

refurbishment or routine maintenance, our
engineers can help to optimize machine
performance, minimize downtime and ensure the
smooth application of our products.

Moog Authentic Repair Service is designed to

provide the highest quality repair services using
original equipment parts, the latest design
specifications, and highly trained technicians. this
ensures that our repaired products will run as well
as when they were new.

With facilities in over 25 countries, Moog is

committed to offering convenient local service
to our customers.

Visit www.moog.com/industrial/worldwide to find the

location nearest you for application engineering,
repair, or field services.

FOR MORE INFORMATION VISIT

http://www.moog.com/industrial

WHAT MOVES YOUR WORLD Page 11 MOOG

MORE PRODUCTS. MORE SUPPORT.
Moog designs a range of motion control products to complement those featured in this document. Moog also provides
service and support for all of our products. For more information, contact the Moog facility closest to you.

Australia India Russia

+61 3 9561 6044 +91 80 4057 6666 +7 8 31 713 1811
Service + 61 3 8545 2140 Service +91 80 4057 6604 Service +7 8 31 764 5540
[email protected] [email protected] [email protected]
[email protected] [email protected] [email protected]

Brazil Ireland Singapore

+55 11 3572 0400 +353 21 451 9000 +65 677 36238
[email protected] [email protected] Service +65 651 37889
[email protected] [email protected]
[email protected]
Italy
Canada +39 0332 421 111
+1 716 652 2000 Service 800 815 692 South Africa
[email protected] [email protected] +27 12 653 6768
[email protected] [email protected]
China
+86 21 2893 1600 Japan Spain
Service +86 21 2893 1626 +81 46 355 3767 +34 902 133 240
[email protected] [email protected] [email protected]
[email protected] [email protected]
Sweden
France Korea +46 31 680 060
+33 1 4560 7000 +82 31 764 6711 [email protected]
Service +33 1 4560 7015 [email protected]
[email protected] [email protected]
[email protected] Turkey
+90 216 663 6020
Luxembourg [email protected]
Germany +352 40 46 401
+49 7031 622 0 [email protected]
Service +49 7031 622 197 United Kingdom
[email protected] +44 (0) 1684 858000
[email protected] The Netherlands Service +44 (0) 1684 278369
+31 252 462 000 [email protected]
[email protected] [email protected]
Hong Kong [email protected]
+852 2 635 3200
[email protected] USA
+1 716 652 2000
[email protected]
[email protected]

For product information, visit www.moog.com/industrial

For service information, visit www.moogglobalsupport.com

Moog is a registered trademark of Moog Inc. and its subsidiaries.

All trademarks as indicated herein are the property of Moog Inc. and its subsidiaries.
©2017 Moog Inc. All rights reserved. All changes are reserved.

Directional valve with flow control functionality (WE42P06HMC1P)

Moog Luxembourg/Rev.B, July 2017

WHAT MOVES YOUR WORLD