Scribd
Upload
17 views

Flashing_tutorial-G1_EN-V2.07-20241008

This document provides a step-by-step tutorial for flashing the G1 player firmware, applicable to English G1 models. It includes instructions for downloading, unzipping the firmware and flash tool, configuring the flash tool, and successfully flashing the device. Additional support information is provided for troubleshooting and contacting customer service.

Uploaded by

abutalibdush
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Flashing_tutorial-G1_EN-V2.07-20241008

This document provides a step-by-step tutorial for flashing the G1 player firmware, applicable to English G1 models. It includes instructions for downloading, unzipping the firmware and flash tool, configuring the flash tool, and successfully flashing the device. Additional support information is provided for troubleshooting and contacting customer service.

Uploaded by

abutalibdush
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Flashing tutorial

(Applicable models: English G1)

1. Download and Unzip Firmware and Flash Tool


1) Click the link below to download the "G1-EN-V2.07-20241008" file from Google driver.
https://drive.google.com/file/d/1LFsL_uHUt3LUEKUrsit-nlhad-1QdMoP/view?usp=drive_link

2) Unzip the downloaded “G1-EN-V2.07-20241008”, you will get the following 3 files.
- Download the whole file and then unzip it! It won't work without unzipping! If you don't have an unzip tool, download

https://www.win-rar.com/ or other unzipping tool.

- How to unzip: Right mouse click on the file and select Unzip.

After unzipping you will see the following files:


- Flash Tool：Named “SP_Flash_Tool_exe_Windows_v5.1904”
- Firmware: Named “MX3W_EN-V2.07-20241008”
- Tutorial Video: Named “Flashing tutorial”

2. Run and Configure Flash Tool


1) In the flash tool folder, find and double-click "Flash_tool.exe" to run it.
Note: After unzipping, the “Flash_tool.exe” file may be mistakenly deleted because it is judged as an unknown source

file by the Windows Security Center or third-party security software. If so, please temporarily turn off Windows

protection detection or third-party security software before unzipping. You can also set Flash_tool.exe as a trusted

program in Windows protection detection or third-party security software.For win10, please visit Settings>>Update

and Security>>Windows Security Center>>Virus and Threat Protection, find "Protection History", then find

"Flash_tool.exe" and restore it.

2) Find the "Download" tab in the flash tool window, and click the button “choose” on
the right side of the "Download-Agent" input box, then find "MTK_AllInOne_DA.bin"
in the flash tool folder and choose to open it. As follows:
3) Click the button “choose” on the right side of the "Scatter-loading File" input box,
then find "MT6753_Android_scatter" in the firmware folder and choose to open it.
As follows:
4) Click and select the "Format All + Download" option in the flash type drop-down box.
As shown below:

3. Flash G1 player
1) Click the button “Download”. The update tool will be waiting for the device to connect.
2) Next, turn off G1 player and connect it to your computer with the supplied USB-C
cable. The update tool will automatically recognize the connected device and start
formatting and updating the firmware. You can see the percentage of completion
through the color progress bar below, until 100% complete.

Once done, the flashing tool will pop up a prompt. As shown below

Note:

·Please make sure that the G1 player is turned off and then connected to the computer, otherwise it will not be able to

flash normally.

·If there is no response from the progress bar after connecting to the computer, it means that the Flash tool does not

recognize the G1 player. Most cases are caused by the lack of the correct MTK USB driver on the computer.

If you are win10 or win11, please download the following driver on your computer and try again.

https://www.wooabc.cn/download/MTPUSBDriverForWin10.rar
If you have other versions of Windows, please contact us for the corresponding driver.

At this point, the firmware update is complete.

For more help or to schedule a remote assistance appointment, please contact us via
email and we will get back to you as soon as possible.
Online support: [email protected]

You might also like