XSAV11801 Document (2)
XSAV11801 Document (2)
Main
Range of Product Telemecanique Inductive proximity sensors XS
Series name Application
Product or Component Sensor
Type
Sensor Type Inductive proximity sensor
Device Application Rotation monitoring
Sensor name XSA
Sensor design Cylindrical M30
Size 81 mm
Body type Fixed
Detector flush mounting Flush mountable
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
acceptance
Material Metal
Enclosure Material Nickel Plated Brass
Type of output signal Discrete
Wiring Technique 2-wire
[Sn] nominal sensing 0.4 in (10 mm)
distance
Discrete output function 1 NC
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Output circuit type AC/DC
Electrical connection Cable
Cable length 6.6 ft (2 m)
[Us] rated supply 24...210 V DC
voltage 24...240 V AC 50/60 Hz
Neither TMSS Holding nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Switching capacity in 5...200 mA DC
mA 5...350 mA AC
IP degree of protection IP67 conforming to IEC 60529
Complementary
Thread type M30 x 1.5
Detection face Frontal
Front material PPS
Sensing range > 0.31...0.59 in (> 8...15 mm)
Adjustable frequency range 6…150 cyc/mn
Operating zone 0.0000000000…0.3 in (0…8 mm)
Differential travel 3...15% of Fr
Repeat accuracy 3% of Sr
Cable composition 2 x 0.34 mm²
Wire insulation material PVC
Status LED Output state 1 LED red)
Supply voltage limits 20…264 V AC/DC
Maximum residual current 1.5 mA open state
Switching frequency <= 100 Hz
Maximum voltage drop <5.7 V closed)
Run-up delay at power-up 9 s standard
Marking CE
Threaded length 2.6 in (67 mm)
Length 3.2 in (81 mm)
Net Weight 0.7 lb(US) (0.3 kg)
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 1.614 in (4.100 cm)
Package 1 Width 3.740 in (9.500 cm)
Package 1 Length 5.197 in (13.200 cm)
Package 1 Weight 7.972 oz (226.000 g)
Unit Type of Package 2 S02
Number of Units in Package 2 22
Package 2 Height 5.9 in (15 cm)
Package 2 Width 11.8 in (30 cm)
Package 2 Length 15.7 in (40 cm)
Package 2 Weight 11.530 lb(US) (5.230 kg)
Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl
phthalate (DINP), which is known to the State of California to cause cancer,
and Di-isodecyl phthalate (DIDP), which is known to the State of California
to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Circularity Profile
End of Life Information
For all Reach Rohs enquiries contact us at [email protected]
Contractual warranty
Warranty 18 months