Alcatel-Lucent Intelligent Services Access Manager FX

F A N T - F 4 8 0 G N etwork T ermination card | R elease 4 . 3

The Alcatel-Lucent ISAM FANT-F Network Termination card is an ISAM controller board that provides service
and network intelligence in the access node. It is used in Alcatel-Lucent 7360 ISAM FX shelves, providing a
480-Gb/s switching matrix, making it the ideal controller for fiber deployments. The Alcatel-Lucent ISAM
FANT-F Network Termination card supports up to 40 Gb/s connections to each line card slot.

The FANT-F Network Termination Features

card provides four configurable
Small Form Factor Pluggable (SFP)+ • 480 Gb/s switching matrix
cages supporting 10 Gb/s, and 1-Gb/s (bidirectional)
links for subtending, direct user or • Active-active redundancy
network interfaces. Optional hardware • Supports 40-Gb/s connection to
variants are available for applications each line card slot (FX-4 and FX-8)
requiring high-stability clock, building
• Supports 20-Gb/s connection to
integrated timing source (BITS)
each line card slot (FX-16)
interface and Syn­chronous Ethernet
(SyncE). The FANT-F Network Termi­ • 4 x 10 Gigabit Ethernet (GE) network
nation card runs the same field-proven links with 1 + 1 link redundancy
IP protocol stack as the Alcatel-Lucent • Subtending and aggregation support
aggregation routers, supporting Ethernet, • Optional hardware variants with
IPv4, IPv6 and Multi-Protocol Label BITS/SyncE with high stability clock,
Switching (MPLS). BITS and SyncE clock recovery
• MPLS forwarding with enhanced
Two FANT-F Network Termination routing support: Routing Information
cards can be run in Active-Active Protocol (RIP), Open Shortest Path
redundancy mode, ensuring system First (OSPF), Border Gateway Protocol
reliability and providing a total (BGP) and Intermediate System-to-
system switching capacity of 960 Gb/s Intermediate System (IS-IS)
and delivering up to 80 Gb/s to each • Powerful, embedded Application
line card slot. Each card is equipped Enablement processor
with an Application Enablement
• Industrial hardened
Processor, providing a future-ready
platform enabling application
intelligence innovations.
Benefits • Reduces number of aggregation • Positions operator for future
network ports required, through application-intelligence innovations
• Offers non-blocking architecture self-aggregation feature using Application Enablement
• Delivers 99.999% availability • Supports clock-critical applications: Processor
• Supports Carrier Ethernet services voice, leased lines and mobile • Deploys in indoor and outdoor
• Provides fast recovery of critical backhauling environments
services with MPLS

Technical specifications • Dynamic Host Configuration • Alarm management • Protection: ITU-T K.20/K.45
Protocol (DHCP) relay, multiple ¬ Severity handling • Safety: IEC 60950-1/EN60950-1
instances
¬ Lists: current, snapshot, delta • EMC and ESD
External interfaces • Access control lists, denial of
service protection ¬ Logs ¬ ETS 300 386 V1.3.3 (2005-04)
• 4 ports optical 10 Gigabit/
¬ Filtering for telecommunication network
1 Gigabit interface • Malicious MAC-move protection equipment
• Optical and electrical connection • Lawful intercept • Troubleshooting counters
¬ GR-1089-CORE
through SFP and SFP+ standards • IP Ping and traceroute
• Billing and accounting support • European directive 2002/95/EC
• 1 port electrical • Central processing unit (CPU)
• Hubbing support on the restriction of the use of
10/100/1000BASE-T port and memory load
• Ethernet ring connectivity certain hazardous substances
(RJ-45 connector)
• SFP digital diagnostics (RoHS)
• 2 ports BITS interface: only on • Support for central broadband
remote access server (BRAS) and • Performance monitoring
BITS variant; 1 port in, 1 port
distributed service-edge models • Protocol tracing Operating conditions
out, using ITU-T G.703 (RJ45
connectors (ANSI interfaces • Point-to-Point Protocol (PPP) ¬ DHCP • -5°C to +45°C (23°F to 113°F)
available on sperate GFC unit) connectivity to single or inlet/ambient temperature range,
¬ Address Resolution when used in fully populated
• 1 port local craft management multiple systems Protocol (ARP) Alcatel-Lucent 7360 ISAM racks
(LCM) interface using RS-232 • Up to 32,000 subscribers per ¬ IGMP (with more than one shelf)
(RJ-45 connector) system (16,000 in L3 deployment)
¬ Output to CLI, syslog or • -40°C to +65°C (-40°F to +149°F)
• 1 Alarm CutOff (ACO) button
local file inlet/ambient temperature range,
for alarm cut off and lamp test Deployment
• Offline migration system when used in standalone Alcatel-
interfaces, for example, signaling
• Simple Network Management configuration Lucent 7360 ISAM FX shelves
and communication (ANSI ACO
Protocol (SNMP) • Over-temperature sensors and
available on sperate GFC unit)
¬ SNMPv1 (RFC 1157) Eco-sustainability over-temperature shutdown
Forwarding ¬ SNMPv2 (RFC 1909-1910) • Switch ports can be selectively • 5% and 85% RH
¬ SNMPv3 (RFC 3410-3418) powered down (Relative Humidity)
• Ethernet bridging
• Command-line interface • GR-3108-CORE for operating
• Virtual local area network
(CLI): telnet (RFC 854), Standards compliance temperature and humidity for
(VLAN) stacking for residential
Secure Shell (SSH) Class 2 equipment
and business access • Environmental
• Transaction Language 1 (TL1): • Compliant with environmental
• 802.3ad trunking: Link ¬ ETS 300 019-1-1 storage –
with or without SSH requirements as described in
Aggregation Control Class 1.1 (weather-protected, ATT-TP-76200
Protocol (LACP) • FTP: partly temperature-controlled
locations) • Support for tropical environments
• Multiple Spanning Tree Protocol ¬ File Transfer Protocol (FTP) (50°C, 99% RH)
(MSTP), Rapid Spanning Tree (RFC 959) ¬ ETS 300 019-1-2 transport –
Protocol (RSTP) and Spanning Class 2.3 (packed, public
¬ Trivial File Transfer Protocol Dimensions
Tree Protocol (STP) support transportation)
(TFTP)
• 4,095 VLAN IDs, VLAN stacking ¬ ETS 300 019-1-3 stationary • Height: 405 mm
¬ Secure Shell File Transfer
(Q in Q), 128,000 move, add and use – Class 3.1E (temperature- • Width
Protocol (SFTP), for backup and
change (MAC) addresses controlled locations), when
restore and software download ¬ Top: 225 mm
• MPLS used in fully populated Alcatel-
• Simple Network Time Protocol Lucent 7360 ISAM racks (with ¬ Bottom: 205 mm
• L3 forwarding (IPv4) (SNTP) more than one shelf) • Board-to-board pitch: 30 mm
• RIP v2, OSPF v2, BGP v4, • Syslog: CLI screen, external ¬ ETS 300 019-1-3 stationary use
IS-IS routing protocols server, local file – Class 3.3 (not temperature-
• Multicast forwarding, high- • Loopback interface controlled locations), when
performance Internet Group used in standalone Alcatel-
• CLI and TL1 operator authentication:
Management Protocol (IGMP) Lucent 7360 ISAM shelves
local or Remote Access Dial-In
processing, IGMP proxy
User Server (RADIUS) based ¬ NEBS Level 3 compliant
• IP Quality of Service (QoS) (SR-3580)
¬ GR-63-CORE

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo

are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility
for inaccuracies contained herein. Copyright © 2011 Alcatel-Lucent. All rights reserved.
CPG1076101176 (01)