VIC-PRESS

FOR SCHEDULE 10S

STAINLESS STEEL PIPE

INDUSTRIAL STRENGTH PRESS-TO-CONNECT SYSTEM

Vic-Press™ for Schedule 10S
5S/10S

INNOVATION
AT A GLANCE
THE VIC-PRESS™ FOR SCHEDULE 10S SYSTEM IS A FLAME-FREE
PRESS SYSTEM THAT JOINS ASTM A-312 PIPE
Available in ½ – 2" | DN15 – DN50 Pre-Lubricated Seal
sizes. IPS pipe wall thickness provides Fittings arrive bagged and pre-lubricated. No
up to 3× superior strength, 2× additional lubrication is required for installation.
superior durability and up to 52%
improved flow over thin-walled tube. Positive Mechanical Interlock
The Vic-Press for Schedule 10S system has the
integrity to stand up to the rigorous demands
of industrial applications by providing a
APPLICATIONS INCLUDE: positive mechanical interlock between
the pipe and the fitting.
Water
• Potable
• Utility
• Demineralized
• Cooling
• Heating
• Raw
• Recirculated
• Eye Wash Stations
• Shower Stations

Process Chemicals
• Mild Acids
• Mild Caustics
• Hydrocarbons
• Paints, Inks and Dyes
• Alcohol
• Salt Solutions
• Lube Oil
• Cutting Oil

Air and Gases

• Compressed Air
• Instrument Air
• Industrial Gases
• Inert Gases
• Air with Oil Vapor
• Vacuum
• Pneumatic Conveyance

 pproved for use on ASTM A-312 off-the-shelf

A
Schedule 5S material. See publications 18.11
and 18.12 for ratings and details.

PB-552 REV G
Insertion Mark Once pressed, Vic-Press™ couplings, fittings and
valves create a permanent joint rated up to 500 psi
A witness mark made by installer prior
to installation allows for visual verification | 3447 kPa | 34 bar and FM Approved to 175 psi |
that the pipe has been fully inserted 1207 kPa | 12 bar.
for proper installation.
This patented press detection technology provides
for easy identification of unpressed joints as a system
is being pressurized. Vic-Press meets ASME B31.1,
B31.3 and B31.9 support requirements as well as
ANSI Class 150 Ratings.
• Standard HNBR seal suitable for a variety of
process and utility applications including air
with oil vapor up to 210°F | 98°C
•  lternative EPDM and Fluoroelastomer seals
A
available, providing temperature ranges of
-30 to 250°F | -34 to 121°C and 20 to 300°F |
-7 to 149°C
•  L Classified in accordance with ANSI/NSF 61
U
up to 180°F | 82°C potable water service and
NSF 372, for grades H and E

Unpressed Joint Seal Pocket

Sized to contain the seal. The seal
pocket position helps protect the
seal during assembly.

Pipe Stop
An internal pipe stop locates pipe position Vic-Press
to ensure positive joining. Installation
Tool
Pressed Joint Seal Pocket
Seal is compressed to provide a leak-free
connection for a variety of wet and dry services.

Housing
Precision formed stainless steel construction
incorporating the pipe stop and seal.

MARK IT FIT IT PRESS IT

victaulic.com/vicpress PB-552 REV G

VIC-PRESS
™

For Schedule 10S Stainless Steel Type 304 download publication 18.12 for complete information
For Schedule 10S Stainless Steel Type 316 download publication 18.11 for complete information
Connection Key
P Press
F Female Thread
M Male Thread
T Plain End
L Flanged
Style P597 Style P586 Style P542 Style P591 Style P543
G Grooved
Style P507 Style P568 Style P562 Style P571 Style P563
Standard Short Tangent 90º Street 45º Elbow 45º Street
Coupling 90º Elbow Elbow (P × P) Elbow
(P × P) (P × P) (P × T) (P × T)

Style P508 Style P592 Style P588 Style P593 Style P596 Style P599
Slip Coupling Style P572 Style P578 Style P573 Style P576 Style P579
(P × P) Tee Tee with Tee with Male Threaded Female Threaded
(P × P × P) Threaded Branch Reducing Branch Adapter Adapter
(P × P × F) (P × P × P) (P × M) (P × F)

Style P561 Style P584 Style P595 Style P565 Style P587 Style P594
Weld Adapter Style P585 Style P575 Style P566 Style P577 Style P574
(P × T) Threaded Flange Adapter Van Stone Transition Concentric
Union (P × L) Flange Adapter Nipple Reducer
(P × P) (P × L) (G × T) (P × P)

Style P540 Style P569 Style P589 PFT510

Style P560 Stainless Steel Ball Valve Brass Body Ball Valve Vic-Press
End Cap (P × P shown) (P × P) Tool
(G × G and P × G also available)

victaulic.com/vicpress

PB-552 6383 REV G 03/2017

Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or
its affiliated entities, in the U.S. and/or other countries. All other trademarks listed herein are the property of their
respective holders, in the U.S. and/or other countries. The terms “Patented” or “Patent Pending” refer to design or
utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.
© 2017 VICTAULIC COMPANY. ALL RIGHTS RESERVED.