Scribd
Upload
17 views6 pages

Digital Electronic 1 Edited

The document is an examination paper for Digital Electronics, consisting of seven questions that cover various topics such as the differences between analog and digital signals, binary arithmetic, Boolean algebra, logic gates, flip-flops, and shift registers. Each question requires detailed answers, calculations, and circuit diagrams. The exam is designed to assess the understanding and application of digital electronic concepts.

Uploaded by

hemantha dalugama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views6 pages

Digital Electronic 1 Edited

The document is an examination paper for Digital Electronics, consisting of seven questions that cover various topics such as the differences between analog and digital signals, binary arithmetic, Boolean algebra, logic gates, flip-flops, and shift registers. Each question requires detailed answers, calculations, and circuit diagrams. The exam is designed to assess the understanding and application of digital electronic concepts.

Uploaded by

hemantha dalugama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Digital Electronic 1 5S1NVQ184

Answer any five questions Three Hours


1.

I. How do analog and digital signals differ in terms of their


susceptibility to noise?
II. Give three real-world examples of devices or systems that
primarily use digital signals?
III. State two limitations of Digital Signals.
IV. Explain about duty cycle, periodic time, NGT and PGT of
clock signal with the help of sketches.
V.
What happen when the input voltage is between minimum
input high voltage (VIH) and maximum input low voltage
(VIL)
(4x5 marks)
2.
I. Add the following numbers.
a) 00110102 + 1110012
b) 10101112 + 10011112
II. Subtract the following numbers
c) 11011- 01011
d) 101- 011
III. Carry out following multiplications
a) 111 x 101
b) 1011 x 1001
IV. Carry out following divisions
a) 110 11
b) 1111 110
V. Convert following decimal numbers to binary
a) 108
b) 249
(4x5 marks)

3.
I. Convert
a) 23748 to its decimal
b) B2F816 to decimal
c) A916 to Binary
d) 011011012 to hexadecimal
II. Find 2’s compliment of
a) 1102
b) 101012
III. Subtract following using 1’s compliment method
a) 10012 – 11012
b) 11012 – 10012
IV. Subtract following using 2’s compliment method
a) 11002 – 10112
b) 100112 – 111002

V. Add following numbers


c) 11002 + 10112
d) 100112 + 111002
(4x5 marks)

4.
I. Simplify the following Boolean expressions using Boolean
algebra.
a)

b)
(4 marks)
II. Simplify the following Boolean expressions using
Karnaugh map.

(4 marks)
III. Develop logic equations for following truth tables
a)
b) (6 marks)

(6 marks)

5.
I. Draw logic symbols and truth tables for following gates
a) Exclusive OR gate
b) Exclusive NOR gate

II.
a) Draw logic circuit to represent Exclusive OR gate and
Exclusive NOR gate using basic logic gates.
b) Draw logic circuit to represent Exclusive OR gate and
Exclusive NOR gate using only NAND gates.

III. Draw practical circuit using diodes and resistors for


following gates.
a) Two input OR gate
b) Three input AND gate
IV. Draw truth table logic diagram and logic symbol for half
adder.
V. Sketch the construction of full adder using two half adders.
(4x5 marks)

6.
I. Explain the term “BISTABLE” or “LATCH”.
II. Draw a simple RS Bistable using “NAND” and “NOR”
sand derive its truth tables.
III. Explain the operation of “CLOCKED SR FLIP FLOP” with
“PRE-SET” and “CLEAR” inputs.
IV. Draw the circuit diagram of the conversion of S-R flip-flop
into D flip-flop and its truth table.
V. Draw truth table for JK flip-flop with outputs for all
synchronous and asynchronous inputs.
(4x5 marks)

7.
I. What is meant by shift registers. (4 marks)
II. What are the four types of shift registers. (4 marks)
III. Draw 4 bit serial in serial out shift register with JK flip-flops.
(4 marks)
IV. Draw the truth table and following waveforms for the
propagation of the logic “1” through the 4 bit register during
five clock pulses for the above question in “III”. (8 marks)

You might also like