Scribd
Upload
9 views

Manual_Software

This instruction manual provides detailed guidance on the setup and operation of RS232 communication with a meter, including hardware and software requirements. It covers steps for wiring, data recording, downloading data, and converting it for use in Excel and graphing applications. Additionally, it explains sampling rates and how to analyze voltage data over specified time periods.

Uploaded by

José de Arimatéia Alves Vieira Filho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

Manual_Software

This instruction manual provides detailed guidance on the setup and operation of RS232 communication with a meter, including hardware and software requirements. It covers steps for wiring, data recording, downloading data, and converting it for use in Excel and graphing applications. Additionally, it explains sampling rates and how to analyze voltage data over specified time periods.

Uploaded by

José de Arimatéia Alves Vieira Filho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

Instruction Manual

RS232 Wiring Hardware..........................................................................2


Hardware Requirements and Setup........................................................3
Software Requirements and Setup……..................................................4
Communicating Operation……………..................................................8
Run Software.............................................................................................8
Data Record……………………………….............................................9
Download Data........................................................................................10
SD Card…………………………………………………………………11
Data Convert...........................................................................................12
Apply for Excel…...…………………....................................………….12
Apply for Graph…...…..……………………………....……………….14
Sampling Time..…...……………………………………..…………….16
Real Time Clock…..………………………………………………….17
Single Record…………………………………….....…………………..18
30-minutes Maximum / Minimum / Average……………………….19
30-minutes Average of Maximum / Minimum / Average……………20
24-hours Voltage Analysis………………………………………….….21

Page 1 / 18
 RS232 Wiring Hardware
PC Interface Cable Meter side of PC Interface Cable The RS-232 “Optical” plug
side of the PC Interface Cable connects to the meter’s RS-232 “Optical” jack. Refer to
the diagram below for wiring information.

Computer’s Serial Port side of Interface Cable

The RS-232 “DB-9” side of the PC Interface Cable connects to the PC’s COM port.
Refer to the diagram below for wiring information. Note that a SERIAL to USB
Adapter may be used.

RS232 Default Settings When RS-232 communication enabled ,the default RS-232
settings are
Baud Rate 19200
Parity None
Data bits 8
Stop bit 1

Page 2 / 18
 HARDWARE REQUIREMENTS AND SETUP
PC HardWare Requirements :
HDD, CD Rom, 486 PC or above, with an available COM port
EGA or higher monitor
4M bytes or more memorysize

PC HardWare Setup :
1) Switch off all power related to the PC
2) Connect the DB9 (female) end of the supplied RS-232 cable to available COM
port
3) Switch on all related power
4) Connect the fiber end of the supplied RS-232 cable to the meter

Page 3 / 18
Software Requirements and Setup
1) Start up windows 98//XP//7//8//10 operating system
2) Close all other application
3) Insert disk in CD drive

4) To install USB driver, click .

Page 4 / 18
5) To install meter software, Click . Setup program will run
automatically.

1.

2.

Page 5 / 18
Click “Next”

3.

Click “Install”

4.

Page 6 / 18
5.

Click “Finish”

Page 7 / 18
 Communication Operation
Run the software

1. Click icon.

Select as available COM Port then click OK


2. Main software screen

Page 8 / 18
 Data Record
Save to H.D.D.

Click button. The dialog box shown below will appear.

Input a file name and then Click to begin saving data to the file just
named.

Page 9 / 18
 Download data

Click button. The Open window, shown below, appears.

Input the file that was selected earlier and the click to read.

Page 10 / 18
 SD Card

Click button. The Data Logger window, shown below, will open.

Click on a SET number to view the set’s details. For example, in the window
above, there are 2 sets from which to choose. The list below is an example of an
opened set.

Page 11 / 18
 Data Convert
Apply for Excel
Open Microsoft Excel, find the file saved, for example3600N.pan

The “Text Import Wizard” then appears. Follow on-scree instructions.

Click

Page 12 / 18
Click

Click to complete.

Page 13 / 18
 Apply for Graph

Open a saved data file in the software program and then click .

Click graphic.

Page 14 / 18
Page 15 / 18
 Sampling Time
PC Sampling Rate:
(rate at which the PC collects readings while connected to the meter)

Click on the Menu Bar.

Click button.

Click button.

Meter Sampling Rate:

Click on the Menu Bar.

Click button.

Click button.

Page 16 / 18
 RTC ( Real Time Clock)

Click on the Menu Bar to set the meter time to PC system time.

Click to show PC System Time or to show


Meter Time.

Click to set the meter time to PC system time.

Page 17 / 18
 Single Record
Click button, On Menu Bar.

Click button. Print form page.

Page 18 / 18
 30-minutes Maximum / Minimum / Average
Open a saved file and then click the button (red circle) to confirm.

Page 19 / 18
 30-minutes Average of Maximum / Minimum / Average
Open a saved file and then click the button (red circle) to confirm.

Page 20 / 18
 24-hours Voltage Analysis
Open a saved file and then click the button (red circle) to confirm

Page 21 / 18

You might also like