1 Package Contents
Network Video Recorder Power Adapter HDD Screws
Quick Installation Guide
Mouse Quick Installation Guide Mounting Brackets & Rubber Feet
PoE Network Video Recorder (for some models)
*Images may differ from actual products. VIGI NVR1008H-8MP is used for demonstration in this guide
©2023 TP-Link 7106510692 REV1.1.2
2 Product Overview
LED Indication
Front Panel SYS
On: System is running normally.
Off: System is running abnormally.
On: Network is working properly.
LAN
Flashing: Data is being transmitted or received.
Off: Network is malfunctioning.
On: The HDD is normal.
HDD
Off: No HDD or the HDD is malfunctioning.
On: The total PoE power reaches the warning threshold.
PoE Max Flashing: The total PoE power has reached the warning threshold for more than 2 minutes.
Off: The total PoE power does not reach the warning threshold.
On: The port is supplying power normally.
LED USB Port
PoE Flashing: Overload or short circuit is detected.
Off: Not providing PoE power on the port.
Back Panel On: A device is linked to the port but no activity.
Link / Act Flashing: Transmitting or receiving data.
Off: No device is linked to the corresponding port.
Grounding Terminal AUDIO IN VGA LAN Port
Interface Description
AUDIO IN / Connector for audio input and output.
AUDIO OUT Note: Audio input only supports microphones with power supply.
Output port for high-definition audio and video signals. Connect
HDMI your monitor to this port if it uses HDMI connection.
Output port for analog video signals.
VGA Connect your monitor to this port if it uses VGA connection.
2 USB ports for additional devices such as USB mouse, USB storage device,
USB
and USB keyboard.
Kensington AUDIO OUT HDMI USB Port PoE Port POWER
Security Slot
RJ45 10/100Mbps self-adaptive Ethernet port.
LAN
Connect to an Ethernet device (eg. router and switch).
Kensington Security Slot: Secure the lock (not provided) into the security slot to prevent the device
from being stolen. Designed to connect to the device with a bandwidth of 100/10 Mbps. The port
PoE can also provide power for PoE PDs (recommended for PoE cameras).
Grounding Terminal: The device comes with lightning protection mechanism.
POWER Connector for power input.
3 Hard Drive Installation
When installing for the first time, please prepare a 3.5-inch hard disk drive (HDD). It is recommended to use the HDD of surveillance or enter-
prise level. Before installation, please disconnect the power from the network video recorder (NVR).
1. Remove the fixing screws on the side and back panels to open the 3. Match the 4 screws on the HDD with the 4 holes on the NVR, and insert
cover of the NVR. the HDD interface into the slot.
2. Attach the 4 included HDD screws to your hard drive. Do not fasten. 4. Flip the NVR upside down and fasten the HDD screws. Replace the
cover and fasten the screws of the NVR.
Hard Disk Drive (HDD)
4 Hardware Connection
Follow the steps below to complete the hardware connection.
1. Connect your monitor to the HDMI or VGA port according to the connection
Mouse
Monitor
port it supports.
2. Connect your monitor to a power source and turn it on. or
3. Connect the LAN port of the NVR to a network device with an Ethernet cable.
4. Connect the provided USB Mouse to the USB Interface of the NVR.
5. Connect the power adapter to the NVR. PoE IPCs
Cautions
If you want to turn off the NVR after installing the hard drive, right click on the Live View
screen and click the Power button on Main Menu of your monitor. Do not unplug it directly.
The input voltage should match the power requirements of the NVR.
The buzzer on the NVR may be triggered when no hard drive is installed or the hard drive in
the NVR hasn’t been initialized. You can turn it off in Event-Exception Detection-Disk Network Device
(e.g. Router, Switch)
Exception.
5 Configuration
NVR can add and manage cameras in batches.
* Here we use TP-Link cameras as an example. For other camera brands, please refer to their User Manuals to add the cameras.
Step 1. Connect your cameras to the PoE ports of the NVR or the same Note:
network as your NVR. Make sure your NVR can get access to the internet before binding.
Step 2. Follow the instructions to finish Quick Setup. If you don’t have a TP-Link ID, sign up first.
1. Create a login password for the NVR and a preset password for your unset cameras. If your NVR fails to connect to the Internet, please refer to FAQ-Q3.
For more instructions, please refer to the NVR’s User Guide.
Note: Enter an email address for resetting the password of NVR or cameras.
2. Click Auto Initialize and the NVR will automatically find and add the cameras in
If you want to add a camera after Quick Setup, please follow the steps below:
your network.
1. Right click on the Live View screen and click Add Camera.
Note: If you don’t want to use Auto Initialize, click Manually Initialize and follow the
2. Select a camera and click + to add your camera directly. If you have disabled Plug
Setup Wizard to add cameras in your network and complete the setup.
and Play on your NVR, please create a password or use the preset password for
Step 3. Right click on the Live View screen to open the Main Menu for your unset camera.
management. Note:
(Optional) Step 4. Bind your NVR to a TP-Link ID for remote access and The password preset for cameras in Quick Setup will be applied to your unset cameras.
If your cameras have been activated, use the previous passwords to add and manage the
management.
cameras.
1. Right click on the Live View screen and click Settings. If you can’t find your camera, refer to FAQ-Q2.
2. Click Cloud Services on the top, enter your TP-Link ID and password, and click
Bind.
More Management Methods
You can add and manage your devices via any of the methods below.
Method 1: Via the VIGI Security Manager Method 2: Via the TP-Link VIGI App Method 3: Via a Web Browser
(Windows only) Remotely view live video, manage NVR, and get instant View live video and modify NVR settings via a web
View live video and modify NVR settings on your alerts. browser.
computer.
1. Download and install the TP-Link VIGI app. 1. Find the NVR's IP address on your router’s client page.
1. Download the VIGI Security Manager on your computer at
https://www.tp-link.com/support/download/vigi-security- 2. On your local computer, open a web browser and enter
or
https://NVR’s IP address (https://192.168.0.240 by default).
manager/.
3. Select your Country/Region and Time Zone.
2. Install the VIGI Security Manager and open it.
4. Set a password to activate the NVR.
3. NVR on the same network as your computer can be 2. Open the app and log in with your TP-Link ID. If you don’t
Done. You can manage and change NVR settings, and add
automatically discovered. Go to Settings > Discovered have an account, sign up first.
cameras on the web management page.
Devices, click Add, and follow the instructions to add your 3. Tap the + button on the top right and follow the app
NVR. instructions to add your NVR.
Frequently Asked Questions Safety Information
This device is restricted to indoor use only.
Q1. What should I do if I forget the login password of my NVR?
Keep the device away from water, fire, humidity or hot environments.
A1. Click Forgot Password on the login page and then follow the instructions to reset the password. Do not attempt to disassemble, repair, or modify the device.
A2. Remove the cover, then press and hold the Reset button inside the NVR for over 3 seconds. The NVR will restore Do not use damaged charger or USB cable to charge the device.
to the factory settings. Then follow Quick Setup to create a login password. Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't
hesitate to contact us.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Place the device with its bottom surface downward. Install it at stable places, and prevent it from falling.
The power adapter must be used indoors. Make sure that the temperature of the power adapter is within 0-40°C.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
RES
ET Reset Button CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This equipment is not suitable for use in locations where children are likely to be present.
*Some devices may be incompatible, such as wireless mouse.
Q2. What can I do if no cameras are found? Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
A1. Refresh to discover your cameras again. improper use of the device. Please use this product with care and operate at your own risk.
A2. Make sure the cameras are powered on. CAUTION!
A3. Make sure your cameras and NVR or computer are in the same network. Avoid replacement of a battery with an incorrect type that can defeat a safeguard.
A4. Try to add your cameras manually. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid
Q3. What can I do if my NVR fails to connect to the Internet? or gas;
A1. Check if the internet is working properly. Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
A2. Make sure your NVR is in the same network segment as your network devices, or select Auto as the mode to
CAUTION: Do not ingest battery,Chemical Burn Hazard
configure the NVR to obtain a dynamic IP address. For more details, please refer to the NVR’s User Guide.
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and
If you have more questions, please visit https://www.tp-link.com/support/faq/2850/. can lead to death.
Keep new and used batteries away from children.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI
If the battery compartment does not close securely, stop using the product and keep it away from children.
Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
If you think batteries might have been swallowed or placed inside any part of the body,seek immediate medical attention.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic
For technical support, the user guide and other information, please visit Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
https://www.tp-link.com/support, or simply scan the QR code. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/
