INTECH S.A.

June 28, 2024

UNPRICED SUMMARY FORM

Customer: INTECH S.A.

Proposal No: MIN240440053

Main Offer

ITEM NO QTY MODEL SIZE CONSTRUCTION DRIVER RATING/FRAME RPM

ITEM 001 100.0 hp/405T 1800
3 5500 3x4-18HP B2 HC600
(Escenario 01)
ITEM 002 75.0 hp/365T 1800
1 5500 3x4-18HP B2 HC600
(Escenario 02)
TOTAL 4 units (Main offer)

Page 1
 INTECH S.A.
INTECH S.A.
June 28, 2024
Proposal No: MIN240440053
Item No: ITEM 001 (Escenario 01) (Base Offer)

MODEL: 5500 B2 SIZE: 3x4-18HP QTY: 3

Operating Conditions
SERVICE
LIQUID Slurry, pH Value 7.0 , Rated Temp. 10.0 deg C, SP.GR
1.750, Viscosity 9.000 cp, Rated/Max. suction pressure 0.00 /
0.00 bar g
CAPACITY Rated 130.00 m³/h
HEAD 46.50 (m)

Performance at 1184 RPM per HI 14.6 2B basis power

PUBLISHED EFFY 59.5% (CDS)
RATED EFFY 58.5% corrected due to viscosity
RATED POWER 65.8 hp (Run out 74.5 hp) **
DISCH PRESSURE (R) 7.97 bar g (8.36 bar g @ Shut off) based on 0.00 bar g rated
suction pressure
PERF. CURVE E-10676-2 (Rotation CW viewed from coupling end)
SHUT OFF HEAD 48.78 m
MIN. FLOW Continuous Stable: 33.83 m³/h Hydraulic: 33.83 m³/h
Thermal: N/A

** Power shown is at the pump shaft, add additional power of 2.98 hp to account for drive belt losses

Materials
CONSTRUCTION HC600
CASING HC600 (max.casing pressure @ rated temperature 34.47 bar g)
SUCTION COVER LINER HC600
ST.BOX COVER Ductile iron
IMPELLER HC600 - Enclosed (445 mm rated, max=445 mm)
CASING GASKETS Buna Rubber
SHAFT MATERIAL Steel 4140
SHAFT SLEEVE 420SS hardened
LUBRICATION Flood oil
GLAND 316SS Split
BEARINGS SPHERICAL ROLLER (Inboard) / TAPERED ROLLER (Outboard)
V-BELT DRV. GUARD Steel (overhead)
V-BELT DRIVE Wood's single speed
MOTOR MOUNT Overhead base - Mount Type T

Sealing Method
PACKING Graphite polymer

Page 1
Proposal No: MIN240440053 Item No: ITEM 001 (Escenario 01) (Base Offer)

Flanges
400# raised face

Liquid End Features

Discharge position 0° (Vertical Up)

St.box-Seal chamber features

Weep

Frame Features
Shaft guard (Carbon Steel)
Shaft guard - safety orange

Assembly and Testing

Impeller balance to ISO G16
Non witness hydro test, assembled pump

Baseplate Features
Drilling and tapping of bedplate (NEMA)

Painting
Goulds Blue standard painting

Driver : Electric motor Manufacturer : Customer's Choice

FURNISHED BY Customer MOUNTED BY Customer
RATING 100.0 hp (74.6 KW) ENCLOSURE TEFC - Premium Efficiency
PHASE/FREQ/VOLTS /60 Hz/460 SPEED 1800 RPM
INSULATION/SF /1.15 FRAME 405T

Driver Features
Suitable for V-belt drive

Boxing
Export

Weights and Measurements

TOTAL NET UNIT WEIGHT ** / VOLUME 2,073 kg / 1.583 m³
TOTAL GROSS UNIT WEIGHT / GROSS VOLUME 2,337 kg / 3.305 m³

Program Version 1.76.0.0

This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.

Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.

Our quotation is offered in accordance with our comments and exceptions identified in our proposal. The pricing
quoted herein will remain valid for 30 business days from the time of quotation. In the event that this validity should
expire, please contact your ITT sales representative to confirm pricing validity prior to order placement.

Page 2
Proposal No: MIN240440053 Item No: ITEM 001 (Escenario 01) (Base Offer)

Click here to download the pump Bulletin

Page 3
Hydraulic Details
Item No ITEM 001 (Escenario 01) Pump Type 5500

Proposal # MIN240440053

Liquid Characteristics Hydraulic Requirements

Service Rated capacity 130.00 m³/h
Liquid Slurry NPSHa
Specific Gravity 1.750 Suct. pressure
Temperature 10.0 deg C Viscosity 9.000 cp
Solids size

GENERAL PUMP DATA VALUE PROTECTED

ERP Material Code 1228
ERP Size Code
Case thickness (mm) 32
Max Drive Power per 100 RPM (hp) 8.33
Maximum Motor Size (hp) 125.0
Maximum RPM 1,500
Disch. Size 3''
Suction Size 4''
Maximum casing pressure at 10.0 (deg C) 34.47 bar g
Volute Single
WEIGHTS / MEASUREMENTS VALUE PROTECTED
Bare Pump Weight (kg) 973
Baseplate Weight (kg) 1,100
Total Unit Weight (bare pump, driver, etc) (kg) 2,073
Gross Total Weight (kg) 2,337
Net Volume (m³) 1.583
Gross Volume (m³) 3.305
SHAFT DATA VALUE PROTECTED
Shaft diameter between bearings (mm) 88.900
Shaft diameter at coupling (mm) 63.500
Shaft diameter at impeller (mm) 35.712
Shaft diameter at stuffing box with sleeve (mm) 76.200
Sleeve diameter (mm) 95.2

IMPELLER DATA VALUE PROTECTED

Maximum Impeller diameter (mm) 445

BEARING DATA VALUE PROTECTED

Inboard bearing SPHERICAL ROLLER
Outboard bearing TAPERED ROLLER

TEMPERATURES VALUE PROTECTED

Max Temperature Limit (deg C) 121.1
Min Temperature Limit (deg C) 1.7

POWER LOSS DATA VALUE PROTECTED

V-Belt power loss % 4.00

Page 1
Proposal No : MIN240440053 Item No: ITEM 001 (Escenario 01) Model: 5500
June 28, 2024 10:54:39

Hydraulic Details

Viscosity Factors VALUE PROTECTED

Flow viscosity correction factor (rated)-1st stage 1.000
Head viscosity correction factor (rated)-1st stage 1.000
Efficiency viscosity correction factor (rated)-1st stage 0.984

Motor Data VALUE PROTECTED

(C) Length of driver including shaft (mm) 991
(D) Motor dim. (mm) 254
(O) Driver O dimension (mm) 527
(U) Driver Shaft Diameter (mm) 73
Program Version 1.76.0.0

Page 2
Standard Datasheet CENTRIFUGAL PUMP SPECIFICATION

CLIENT CONTRACT NO:

ADDRESS: BY: Miguel Ignacio DATE:

PLANT LOCATION: PERU APPROVED: DATE:

ITEM: ITEM 001 (Escenario 01) EQUIP.IDENT.NO:

PUMPING CONDITIONS
FLUID PUMPED: Slurry PUMP MATERIAL CLASS HC600
PUMPING TEMP. (PT) 10.0 deg C 50.0 deg F VISCOSITY @ PT 9.000 CP PH

SPECIFIC GRAVITY @ PT 1.750 DENSITY @ PT 0.00 kg/m³

VAPOR PRESS. @ PT mmHg 0.00 BAR ABS SOLIDS CONTENT %WT

PERFORMANCE CHARACTERISTICS
CAPACITY, M³/H NORMAL 0.00 RATED 130.00 MIN. HYDRAULIC / THERMAL FLOW 33.83 / N/A
TDH, M: NORMAL RATED 46.50 DISCH.PRESSURE 7.97 BAR G

SUCTION PRESS., BAR G RATED 0.00 MAXIMUM 0.00

NPSH, M ABS: AVAIL.(NORMAL) 0.00 (RATED) REQD BY PUMP CURVE NO. E-10676-2
SPECIFIC GRAVITY, KG/M3 SOLIDS 2.920 LIQUID 1.000 SLURRY 1.750
SOLIDS DIA., MM 0.00 MAX 0.09 MEAN 0.000 WEIGHT 65.0 VOLUME 39.1
CONCENTRATION % CONCENTRATION %

PUMP DESCRIPTION
TYPE 5500 B2 SIZE 3x4-18HP RPM 1184 ROTATION CW CCW
BHP, hp (RATED) 65.8 (MAX) 74.5 EFFICIENCY (NORMAL) (RATED) 58.5
IMPELLER TYPE Enclosed DIA. mm (RATED) 445 (MAX) 445 (MIN BY MFR) 0
PACKING TYPE Graphite polymer SIZE NO. OF RINGS 0 SEAL CAGE YES NO

MECH.SEAL MFR and MODEL/DYN SEAL

SUCTION FLGD SCRD SIZE

4'' ANSI 400# LB.ASA FACING RF POSITION CL SIDE FACING UP

DISCHARGE FLGD SCRD SIZE

3'' ANSI 400# LB.ASA FACING RF POSITION TOP CTR TANGENT SIDE

BEARINGS (MFR AND TYPE): RADIAL SPHERICAL ROLLER THRUST TAPERED ROLLER (VERT.) THRUST UP DOWN

MATERIAL: CASING HC600 IMPELLER HC600 SHAFT/SLEEVE Steel 4140 / 420SS hardened

SPECIAL MATERIAL
CASING: VENT NPT DRAIN NPT GAGE CONN. SUCTION DISCHARGE / NPT

STUFF.BOX: TAP FOR FLUSH NPT TAP FOR DRAIN NPT JACKETED NPT CONN:COOL WATER RQD GPM
CASING: NO OF STAGE 1 MOUNTING: CENTERLINE FOOT BRACKET VERTICAL

CASING SPLIT: HORZ VERTICAL TYPE OF VOLUTE: SINGLE DOUBLE DIFFUSER

COVER PLATE JACKETED NPT CONN. GLAND COOLING NPT CONN. BEARING HOUSING JACKETED NPT
PUMP BUILT TO: ANSI API STD 610 SPECIAL SPECIFICATIONS
COUPLING TYPE: MAKE: / GUARD:

LUBRICATION: Flood oil HYDROSTATIC TEST PRESSURE: 0.00 BAR G

WEIGHT (KG): PUMP 973 DRIVER 526 BASEPLATE 1,100

PUMP SERIAL NO.:
PUMP CURVE NO.: E-10676-2
SECTIONAL DWG.NO.:

DRIVER
ELECTRIC MOTOR 100.0 HP 460 V PH CPS 1800 RPM EQUIP #

MFR Customer's Choice CLASS DIVISION

STEAM TURBINE MFR STEAM BAR G EXHAUST BAR G

SPECIAL: MFR

REMARKS:

REV.NO. REVISION BY DATE APPD DATE VENDOR ITT Corporation

P.O.NO
C.O.NO
P.O.ITEM NO

ACCOUNT DIST.NO.
DELIVERY
NOT BEFORE DATE
 Model 5500 B2
OUTLINE DRAWING Size 3x4-18HP

Discharge position 0° (Vertical Up)

Pump Specification Weights and Measurements
SUCT.FLANGE SIZE 4'' DRILLING ANSI 400# FACING RF FINISH SMOOTH PUMP 973 kg
DISCH.FLANGE SIZE 3'' DRILLING ANSI 400# FACING RF FINISH SMOOTH MOTOR kg
PUMP ROTATION ( LOOKING AT PUMP FROM MOTOR ) CW BASEPLATE 1,100 kg
TYPE OF LUBRICATION FLOOD OIL COOLED NO TOTAL 2,073 kg
TYPE OF STUFFING BOX N/A COOLED NO GR.VOLUME w/BOX 3.305 m³
TYPE OF SEALING PACKING GR.WEIGHT w/BOX 2,337 kg

Motor Specification Notes and References

MOTOR BY CUSTOMER MOUNT BY CUSTOMER MFG. CUSTOMER'S CHOICE - MTR DIMENSIONS ARE APPROXIMATE
- ADJUSTMENT:76 mm DOWN TO INSTALL BELTS.
FRAME 405T POWER 100.0 hp RPM 1800 * Tolerance is -+6.4 mm
- ADJUSTMENT:102 mm UP TO TAKE-UP BELTS.
PHASE FREQUENCY 60 HZ VOLTS 460
- FLANGE SLOTS OFF CENTER LINE.
INSULATION S.F. 1.15
ENCLOSURE TEFC - PREMIUM EFFICIENCY

Auxiliary Specification
V-BELT MNT BY PUMP MFG V-BELT TYPE WOOD'S SINGLE SPEED
GUARD BY PUMP MFG GUARD MATL STEEL (OVERHEAD)
BASEPLATE OVERHEAD BASE - MOUNT TYPE T
PACKING GRAPHITE POLYMER

DRAWING IS FOR REFERENCE ONLY.

NOT CERTIFIED FOR CONSTRUCTION UNLESS SIGNED.

Customer: INTECH S.A.

End User: HUARON
Customer PO No:
Item/Equip. No: ITEM 001
Serial No:
All dimensions are in mm.
Drawing is not to scale
Weights (kg) are approximate DRAWING NO MIN240440053/ITEM 001 (Escenario 01)
FORM # N/A Program Version 1.76.0.0
 Model 5500 B2
CROSS SECTIONAL DRAWING Size 3x4-18HP
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
003B 1 # POWER END (PREBUILT)
100 1 * CASING 28% Chrome Iron A532 CLAS
100B 1 # LINER,SUCTION CVR 28% Chrome Iron A532 CLAS
101 1 IMPELLER 28% Chrome Iron A532 CLAS
105 1 * LANTERN RING/ASSY (1 PIECE/ Copper Alloy (Silicon Brass) B584-93a
106 1 * PACKING SET
107 1 * ASSY,GLAND Austenitic Stainless Steel 316 A744 GRA
112C 1 # BEARING (OUTBOARD)
113A 1 * BREATHER (TOP CENTER OF B
119B 1 * # COVER,END (INBOARD)
119C 1 * # COVER,END (OUTBOARD)
122 1 ASSY,SHAFT
123Z 1 * # ASSY,KNOCKOFF
125Z 1 * ASSY,SBOX BUSHING (MAY NO Alloy Steel, Hardware 500F
126 1 * SLEEVE,SHAFT STAINLESS STEEL A276 TYPE
134C 1 * # HOUSING,BEARING Gray Iron A48 CLAS
136 1 LOCKNUT,BEARING STEEL
142B 1 # WASHER,KEYED
168C 1 # BEARING (INBOARD)
182 1 COVER,SUCTION Ductile Iron A536-84 G
184 1 COVER,STUFFING BOX Ductile Iron A536-84 G
228 1 * FRAME,BEARING CARBON STEEL A1008 OR
232C 1 * # V-BELT DRIVE
240 1 * # MOUNT,MOTOR CARBON STEEL A1008 OR
319 2 * # GUAGE,OIL VIEW
332 SEAL,OIL (OTBD/OUTSIDE)
333 SEAL,OIL (INBD/OUTSIDE)
351 1 * GASKET/O-RING (CSG-SBOX C Nitrile
351Z 1 * # GASKET SET
353 2 * STUD,FULL THREAD (GLAND-S Chromium-Molybdenum A193 GRA
355 2 * # NUT,HEX (GLAND-SBOX CVR) Chromium-Molybdenum A193 GRA
356A 1 * STUD,FULL THREAD (IMPELLE 303 Stainless Steel A582/F594
360F 1 * GASKET (INBD END CVR) VELLUMOID D-1170 GR
382 1 # LOCKWASHER,BRG STEEL
400 1 KEY,COUPLING CARBON STEEL A108 GRA
402Z 8 * # CLAMP,BRG HOUSING Carbon Steel A576 GRA
412A 1 * GASKET (SLV-IMPLR) OR (SLV- Hydroid Vegetable Fiber D1170 GR
412F 1 * O-RING OR GASKET (CSG-SUC Nitrile
* Recommended spare parts 415 3 * # NUT,HEX HVY (IMPELLER ADJU Zinc A153
459 1 * SCREW,SCKT HD (SBOX BUSHI
# Items not illustrated 496 1 * O-RING (OTBD END COVER-BR Nitrile
497X 1 * # O-RING (SUCT CVR-SUCT LNR) Nitrile
500 1 * # V-BELT GUARD/ASSY (HDWE M
PACKING ARRANGEMENT DYNAMIC SEAL BREATHER / BEARING HOUSING 501F 1 # GUARD, SHAFT ASSEMBLY CARBON STEEL A1008 OR
528J 2 * # WASHER,USS PLAIN (GLAND-S STAINLESS STEEL A276 TYPE
788Y 6 * # SCREW,HHC (INBD END COVE Carbon Steel A108 GRA
788Z 6 * # SCREW,HHC (OTBD END COVE Carbon Steel A108 GRA

PACKING FLUSH ARRANGEMENT

Customer: INTECH S.A.

End User: HUARON
Customer PO No:
Item/Equip. No: ITEM 001 (Escenario 01)
Serial No:

DRAWING NO MIN240440053/ITEM 001 (Escenario 01)

FORM # Program Version 1.76.0.0
Model: 5500 Size: 3x4-18HP Group: B2 60Hz RPM: 1184 Stages: 1

Customer: INTECH S.A. Job/Inquiry No:

End User: HUARON Issued By: Miguel Ignacio
Customer PO No: Quotation No: MIN240440053
Item/Equip. No: ITEM 001 (Escenario 01) (Base Offer) Certified By:
Project No: Date: 06/28/2024
Service: Revision: 0
Operating Conditions Pump Performance
Liquid: Slurry Published Efficiency: 59.5 % Suction Specific Speed:
Temp.: 10.0 deg C Rated Pump Efficiency: 58.5 % Min. Hydraulic Flow: 33.83 m³/h
S.G./Visc.: 1.750/9.000 cp Rated Total Power: 65.8 hp Min. Thermal Flow: N/A
Flow: 130.00 m³/h Non-Overloading Power: 74.5 hp
TDH: 46.50 m Imp. Dia. First 1 Stg(s): 445 mm
NPSHa: NPSHr:
Solid size: Shut off Head: 48.78 m
% Susp. Solids Vapor Press: Max. Solids Size: 0.00 mm
(by wtg):
Notes: 1. Power and efficiency losses are not reflected on the curve below.
2. Curve shown is at ambient temperature conditions.
3. Non Overloading power does not reflect v-belt losses.
 Model: 5500 Size: 3x4-18HP Group: B2 60Hz RPM: 1184 Stages: 1

Customer: INTECH S.A. Job/Inquiry No:

End User: HUARON Issued By: Miguel Ignacio
Customer PO No: Quotation No: MIN240440053
Item/Equip. No: ITEM 001 (Escenario 01) (Base Offer) Certified By:
Project No: Date: 06/28/2024
Service: Revision: 0
Operating Conditions Pump Performance
Liquid: Slurry Published Efficiency: 59.5 % Suction Specific Speed:
Temp.: 10.0 deg C Rated Pump Efficiency: 58.5 % Min. Hydraulic Flow: 33.83 m³/h
S.G./Visc.: 1.750/9.000 cp Rated Total Power: 65.8 hp Min. Thermal Flow: N/A
Flow: 130.00 m³/h Non-Overloading Power: 74.5 hp
TDH: 46.50 m Imp. Dia. First 1 Stg(s): 445 mm
NPSHa: NPSHr: Shut off Head: 48.78 m
Solid size: Max. Solids Size: 0.00 mm % Susp. Solids
(by wtg):
Vapor Press:
Notes: 1. Curve shown is at ambient temperature conditions.
2. Non Overloading power does not reflect v-belt losses.

Viscosity corrections have been performed in accordance with HI 9.6.7-2015

- NPSH curve shown above is at max RPM
Model: 5500 Size: 3x4-18HP Group: B2 60Hz RPM Variable Stages: 1

Job/Inq.No. :
Purchaser : INTECH S.A.
End User : HUARON Issued by : Miguel Ignacio
Item/Equip.No. : ITEM 001 (Escenario 01) (Base Offer) Quotation No. : MIN240440053 Date : 06/28/2024
Service :
Order No. : Certified By : Rev. : 0
Operating Conditions Pump Performance @ 1184 RPM
Liquid: Slurry Published Efficiency: 59.5 % Suction Specific Speed:
Temp.: 10.0 deg C Rated Pump Efficiency: 58.5 % Min. Hydraulic Flow: 33.83 m³/h
S.G./Visc.: 1.750/9.000 cp Rated Total Power: 65.8 hp Min. Thermal Flow: N/A
Flow: 130.00 m³/h Non-Overloading Power: 74.5 hp
TDH: 46.50 m Imp. Dia. First 1 Stg(s): 445 mm
NPSHa: NPSHr:
Solid size: Shut off Head: 48.78 m
% Susp. Solids Vapor Press:
(by wtg):
Max. Solids Size: 0.00 mm

Notes: 1 . Curve shown is at ambient temperature conditions.

 INTECH S.A.
INTECH S.A.
June 28, 2024
Proposal No: MIN240440053
Item No: ITEM 002 (Escenario 02) (Base Offer)

MODEL: 5500 B2 SIZE: 3x4-18HP QTY: 1

Operating Conditions
SERVICE
LIQUID Slurry, pH Value 7.0 , Rated Temp. 10.0 deg C, SP.GR
1.750, Viscosity 9.000 cp, Rated/Max. suction pressure 0.00 /
0.00 bar g
CAPACITY Rated 130.00 m³/h
HEAD 40.00 (m)

Performance at 1105 RPM per HI 14.6 2B basis power

PUBLISHED EFFY 60.0% (CDS)
RATED EFFY 58.5% corrected due to viscosity
RATED POWER 56.4 hp (Run out 60.5 hp) **
DISCH PRESSURE (R) 6.85 bar g (7.28 bar g @ Shut off) based on 0.00 bar g rated
suction pressure
PERF. CURVE E-10676-2 (Rotation CW viewed from coupling end)
SHUT OFF HEAD 42.50 m
MIN. FLOW Continuous Stable: 31.87 m³/h Hydraulic: 31.87 m³/h
Thermal: N/A

** Power shown is at the pump shaft, add additional power of 2.42 hp to account for drive belt losses

Materials
CONSTRUCTION HC600
CASING HC600 (max.casing pressure @ rated temperature 34.47 bar g)
SUCTION COVER LINER HC600
ST.BOX COVER Ductile iron
IMPELLER HC600 - Enclosed (445 mm rated, max=445 mm)
CASING GASKETS Buna Rubber
SHAFT MATERIAL Steel 4140
SHAFT SLEEVE 420SS hardened
LUBRICATION Flood oil
GLAND 316SS Split
BEARINGS SPHERICAL ROLLER (Inboard) / TAPERED ROLLER (Outboard)
V-BELT DRV. GUARD Steel (overhead)
V-BELT DRIVE Wood's single speed
MOTOR MOUNT Overhead base - Mount Type T

Sealing Method
PACKING Graphite polymer

Page 1
Proposal No: MIN240440053 Item No: ITEM 002 (Escenario 02) (Base Offer)

Flanges
400# raised face

Liquid End Features

Discharge position 0° (Vertical Up)

St.box-Seal chamber features

Weep

Frame Features
Shaft guard (Carbon Steel)
Shaft guard - safety orange

Assembly and Testing

Impeller balance to ISO G16
Non witness hydro test, assembled pump

Baseplate Features
Drilling and tapping of bedplate (NEMA)

Painting
Goulds Blue standard painting

Driver : Electric motor Manufacturer : Customer's Choice

FURNISHED BY Customer MOUNTED BY Customer
RATING 75.0 hp (55.9 KW) ENCLOSURE TEFC - Premium Efficiency
PHASE/FREQ/VOLTS /60 Hz/460 SPEED 1800 RPM
INSULATION/SF /1.15 FRAME 365T

Driver Features
Suitable for V-belt drive

Boxing
Export

Weights and Measurements

TOTAL NET UNIT WEIGHT ** / VOLUME 2,073 kg / 1.525 m³
TOTAL GROSS UNIT WEIGHT / GROSS VOLUME 2,329 kg / 3.205 m³

Program Version 1.76.0.0

This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.

Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.

Our quotation is offered in accordance with our comments and exceptions identified in our proposal. The pricing
quoted herein will remain valid for 30 business days from the time of quotation. In the event that this validity should
expire, please contact your ITT sales representative to confirm pricing validity prior to order placement.

Page 2
Proposal No: MIN240440053 Item No: ITEM 002 (Escenario 02) (Base Offer)

Click here to download the pump Bulletin

Page 3
Hydraulic Details
Item No ITEM 002 (Escenario 02) Pump Type 5500

Proposal # MIN240440053

Liquid Characteristics Hydraulic Requirements

Service Rated capacity 130.00 m³/h
Liquid Slurry NPSHa
Specific Gravity 1.750 Suct. pressure
Temperature 10.0 deg C Viscosity 9.000 cp
Solids size

GENERAL PUMP DATA VALUE PROTECTED

ERP Material Code 1228
ERP Size Code
Case thickness (mm) 32
Max Drive Power per 100 RPM (hp) 8.33
Maximum Motor Size (hp) 125.0
Maximum RPM 1,500
Disch. Size 3''
Suction Size 4''
Maximum casing pressure at 10.0 (deg C) 34.47 bar g
Volute Single
WEIGHTS / MEASUREMENTS VALUE PROTECTED
Bare Pump Weight (kg) 973
Baseplate Weight (kg) 1,100
Total Unit Weight (bare pump, driver, etc) (kg) 2,073
Gross Total Weight (kg) 2,329
Net Volume (m³) 1.525
Gross Volume (m³) 3.205
SHAFT DATA VALUE PROTECTED
Shaft diameter between bearings (mm) 88.900
Shaft diameter at coupling (mm) 63.500
Shaft diameter at impeller (mm) 35.712
Shaft diameter at stuffing box with sleeve (mm) 76.200
Sleeve diameter (mm) 95.2

IMPELLER DATA VALUE PROTECTED

Maximum Impeller diameter (mm) 445

BEARING DATA VALUE PROTECTED

Inboard bearing SPHERICAL ROLLER
Outboard bearing TAPERED ROLLER

TEMPERATURES VALUE PROTECTED

Max Temperature Limit (deg C) 121.1
Min Temperature Limit (deg C) 1.7

POWER LOSS DATA VALUE PROTECTED

V-Belt power loss % 4.00

Page 1
Proposal No : MIN240440053 Item No: ITEM 002 (Escenario 02) Model: 5500
June 28, 2024 10:55:34

Hydraulic Details

Viscosity Factors VALUE PROTECTED

Flow viscosity correction factor (rated)-1st stage 1.000
Head viscosity correction factor (rated)-1st stage 1.000
Efficiency viscosity correction factor (rated)-1st stage 0.981

Motor Data VALUE PROTECTED

(C) Length of driver including shaft (mm) 864
(D) Motor dim. (mm) 229
(O) Driver O dimension (mm) 470
(U) Driver Shaft Diameter (mm) 60
Program Version 1.76.0.0

Page 2
Standard Datasheet CENTRIFUGAL PUMP SPECIFICATION

CLIENT CONTRACT NO:

ADDRESS: BY: Miguel Ignacio DATE:

PLANT LOCATION: PERU APPROVED: DATE:

ITEM: ITEM 002 (Escenario 02) EQUIP.IDENT.NO:

PUMPING CONDITIONS
FLUID PUMPED: Slurry PUMP MATERIAL CLASS HC600
PUMPING TEMP. (PT) 10.0 deg C 50.0 deg F VISCOSITY @ PT 9.000 CP PH

SPECIFIC GRAVITY @ PT 1.750 DENSITY @ PT 0.00 kg/m³

VAPOR PRESS. @ PT mmHg 0.00 BAR ABS SOLIDS CONTENT %WT

PERFORMANCE CHARACTERISTICS
CAPACITY, M³/H NORMAL 0.00 RATED 130.00 MIN. HYDRAULIC / THERMAL FLOW 31.87 / N/A
TDH, M: NORMAL RATED 40.00 DISCH.PRESSURE 6.85 BAR G

SUCTION PRESS., BAR G RATED 0.00 MAXIMUM 0.00

NPSH, M ABS: AVAIL.(NORMAL) 0.00 (RATED) REQD BY PUMP CURVE NO. E-10676-2
SPECIFIC GRAVITY, KG/M3 SOLIDS 2.920 LIQUID 1.000 SLURRY 1.750
SOLIDS DIA., MM 0.00 MAX 0.09 MEAN 0.000 WEIGHT 65.0 VOLUME 39.1
CONCENTRATION % CONCENTRATION %

PUMP DESCRIPTION
TYPE 5500 B2 SIZE 3x4-18HP RPM 1105 ROTATION CW CCW
BHP, hp (RATED) 56.4 (MAX) 60.5 EFFICIENCY (NORMAL) (RATED) 58.5
IMPELLER TYPE Enclosed DIA. mm (RATED) 445 (MAX) 445 (MIN BY MFR) 0
PACKING TYPE Graphite polymer SIZE NO. OF RINGS 0 SEAL CAGE YES NO

MECH.SEAL MFR and MODEL/DYN SEAL

SUCTION FLGD SCRD SIZE

4'' ANSI 400# LB.ASA FACING RF POSITION CL SIDE FACING UP

DISCHARGE FLGD SCRD SIZE

3'' ANSI 400# LB.ASA FACING RF POSITION TOP CTR TANGENT SIDE

BEARINGS (MFR AND TYPE): RADIAL SPHERICAL ROLLER THRUST TAPERED ROLLER (VERT.) THRUST UP DOWN

MATERIAL: CASING HC600 IMPELLER HC600 SHAFT/SLEEVE Steel 4140 / 420SS hardened

SPECIAL MATERIAL
CASING: VENT NPT DRAIN NPT GAGE CONN. SUCTION DISCHARGE / NPT

STUFF.BOX: TAP FOR FLUSH NPT TAP FOR DRAIN NPT JACKETED NPT CONN:COOL WATER RQD GPM
CASING: NO OF STAGE 1 MOUNTING: CENTERLINE FOOT BRACKET VERTICAL

CASING SPLIT: HORZ VERTICAL TYPE OF VOLUTE: SINGLE DOUBLE DIFFUSER

COVER PLATE JACKETED NPT CONN. GLAND COOLING NPT CONN. BEARING HOUSING JACKETED NPT
PUMP BUILT TO: ANSI API STD 610 SPECIAL SPECIFICATIONS
COUPLING TYPE: MAKE: / GUARD:

LUBRICATION: Flood oil HYDROSTATIC TEST PRESSURE: 0.00 BAR G

WEIGHT (KG): PUMP 973 DRIVER 379 BASEPLATE 1,100

PUMP SERIAL NO.:
PUMP CURVE NO.: E-10676-2
SECTIONAL DWG.NO.:

DRIVER
ELECTRIC MOTOR 75.0 HP 460 V PH CPS 1800 RPM EQUIP #

MFR Customer's Choice CLASS DIVISION

STEAM TURBINE MFR STEAM BAR G EXHAUST BAR G

SPECIAL: MFR

REMARKS:

REV.NO. REVISION BY DATE APPD DATE VENDOR ITT Corporation

P.O.NO
C.O.NO
P.O.ITEM NO

ACCOUNT DIST.NO.
DELIVERY
NOT BEFORE DATE
 Model 5500 B2
OUTLINE DRAWING Size 3x4-18HP

Discharge position 0° (Vertical Up)

Pump Specification Weights and Measurements
SUCT.FLANGE SIZE 4'' DRILLING ANSI 400# FACING RF FINISH SMOOTH PUMP 973 kg
DISCH.FLANGE SIZE 3'' DRILLING ANSI 400# FACING RF FINISH SMOOTH MOTOR kg
PUMP ROTATION ( LOOKING AT PUMP FROM MOTOR ) CW BASEPLATE 1,100 kg
TYPE OF LUBRICATION FLOOD OIL COOLED NO TOTAL 2,073 kg
TYPE OF STUFFING BOX N/A COOLED NO GR.VOLUME w/BOX 3.205 m³
TYPE OF SEALING PACKING GR.WEIGHT w/BOX 2,329 kg

Motor Specification Notes and References

MOTOR BY CUSTOMER MOUNT BY CUSTOMER MFG. CUSTOMER'S CHOICE - MTR DIMENSIONS ARE APPROXIMATE
- ADJUSTMENT:76 mm DOWN TO INSTALL BELTS.
FRAME 365T POWER 75.0 hp RPM 1800 * Tolerance is -+6.4 mm
- ADJUSTMENT:102 mm UP TO TAKE-UP BELTS.
PHASE FREQUENCY 60 HZ VOLTS 460
- FLANGE SLOTS OFF CENTER LINE.
INSULATION S.F. 1.15
ENCLOSURE TEFC - PREMIUM EFFICIENCY

Auxiliary Specification
V-BELT MNT BY PUMP MFG V-BELT TYPE WOOD'S SINGLE SPEED
GUARD BY PUMP MFG GUARD MATL STEEL (OVERHEAD)
BASEPLATE OVERHEAD BASE - MOUNT TYPE T
PACKING GRAPHITE POLYMER

DRAWING IS FOR REFERENCE ONLY.

NOT CERTIFIED FOR CONSTRUCTION UNLESS SIGNED.

Customer: INTECH S.A.

End User: HUARON
Customer PO No:
Item/Equip. No: ITEM 002 (Escenario 02)
Serial No:
All dimensions are in mm.
Drawing is not to scale
Weights (kg) are approximate DRAWING NO MIN240440053/ITEM 002 (Escenario 02)
FORM # N/A Program Version 1.76.0.0
 Model 5500 B2
CROSS SECTIONAL DRAWING Size 3x4-18HP
BILL OF MATERIAL
ITEM QTY PART NAME MATERIAL ASTM#
003B 1 # POWER END (PREBUILT)
100 1 * CASING 28% Chrome Iron A532 CLAS
100B 1 # LINER,SUCTION CVR 28% Chrome Iron A532 CLAS
101 1 IMPELLER 28% Chrome Iron A532 CLAS
105 1 * LANTERN RING/ASSY (1 PIECE/ Copper Alloy (Silicon Brass) B584-93a
106 1 * PACKING SET
107 1 * ASSY,GLAND Austenitic Stainless Steel 316 A744 GRA
112C 1 # BEARING (OUTBOARD)
113A 1 * BREATHER (TOP CENTER OF B
119B 1 * # COVER,END (INBOARD)
119C 1 * # COVER,END (OUTBOARD)
122 1 ASSY,SHAFT
123Z 1 * # ASSY,KNOCKOFF
125Z 1 * ASSY,SBOX BUSHING (MAY NO Alloy Steel, Hardware 500F
126 1 * SLEEVE,SHAFT STAINLESS STEEL A276 TYPE
134C 1 * # HOUSING,BEARING Gray Iron A48 CLAS
136 1 LOCKNUT,BEARING STEEL
142B 1 # WASHER,KEYED
168C 1 # BEARING (INBOARD)
182 1 COVER,SUCTION Ductile Iron A536-84 G
184 1 COVER,STUFFING BOX Ductile Iron A536-84 G
228 1 * FRAME,BEARING CARBON STEEL A1008 OR
232C 1 * # V-BELT DRIVE
240 1 * # MOUNT,MOTOR CARBON STEEL A1008 OR
319 2 * # GUAGE,OIL VIEW
332 SEAL,OIL (OTBD/OUTSIDE)
333 SEAL,OIL (INBD/OUTSIDE)
351 1 * GASKET/O-RING (CSG-SBOX C Nitrile
351Z 1 * # GASKET SET
353 2 * STUD,FULL THREAD (GLAND-S Chromium-Molybdenum A193 GRA
355 2 * # NUT,HEX (GLAND-SBOX CVR) Chromium-Molybdenum A193 GRA
356A 1 * STUD,FULL THREAD (IMPELLE 303 Stainless Steel A582/F594
360F 1 * GASKET (INBD END CVR) VELLUMOID D-1170 GR
382 1 # LOCKWASHER,BRG STEEL
400 1 KEY,COUPLING CARBON STEEL A108 GRA
402Z 8 * # CLAMP,BRG HOUSING Carbon Steel A576 GRA
412A 1 * GASKET (SLV-IMPLR) OR (SLV- Hydroid Vegetable Fiber D1170 GR
412F 1 * O-RING OR GASKET (CSG-SUC Nitrile
* Recommended spare parts 415 3 * # NUT,HEX HVY (IMPELLER ADJU Zinc A153
459 1 * SCREW,SCKT HD (SBOX BUSHI
# Items not illustrated 496 1 * O-RING (OTBD END COVER-BR Nitrile
497X 1 * # O-RING (SUCT CVR-SUCT LNR) Nitrile
500 1 * # V-BELT GUARD/ASSY (HDWE M
PACKING ARRANGEMENT DYNAMIC SEAL BREATHER / BEARING HOUSING 501F 1 # GUARD, SHAFT ASSEMBLY CARBON STEEL A1008 OR
528J 2 * # WASHER,USS PLAIN (GLAND-S STAINLESS STEEL A276 TYPE
788Y 6 * # SCREW,HHC (INBD END COVE Carbon Steel A108 GRA
788Z 6 * # SCREW,HHC (OTBD END COVE Carbon Steel A108 GRA

PACKING FLUSH ARRANGEMENT

Customer: INTECH S.A.

End User: HUARON
Customer PO No:
Item/Equip. No: ITEM 002 (Escenario 02)
Serial No:

DRAWING NO MIN240440053/ITEM 002 (Escenario 02)

FORM # Program Version 1.76.0.0
Model: 5500 Size: 3x4-18HP Group: B2 60Hz RPM: 1105 Stages: 1

Customer: INTECH S.A. Job/Inquiry No:

End User: HUARON Issued By: Miguel Ignacio
Customer PO No: Quotation No: MIN240440053
Item/Equip. No: ITEM 002 (Escenario 02) (Base Offer) Certified By:
Project No: Date: 06/28/2024
Service: Revision: 0
Operating Conditions Pump Performance
Liquid: Slurry Published Efficiency: 60.0 % Suction Specific Speed:
Temp.: 10.0 deg C Rated Pump Efficiency: 58.5 % Min. Hydraulic Flow: 31.87 m³/h
S.G./Visc.: 1.750/9.000 cp Rated Total Power: 56.4 hp Min. Thermal Flow: N/A
Flow: 130.00 m³/h Non-Overloading Power: 60.5 hp
TDH: 40.00 m Imp. Dia. First 1 Stg(s): 445 mm
NPSHa: NPSHr:
Solid size: Shut off Head: 42.50 m
% Susp. Solids Vapor Press: Max. Solids Size: 0.00 mm
(by wtg):
Notes: 1. Power and efficiency losses are not reflected on the curve below.
2. Curve shown is at ambient temperature conditions.
3. Non Overloading power does not reflect v-belt losses.
 Model: 5500 Size: 3x4-18HP Group: B2 60Hz RPM: 1105 Stages: 1

Customer: INTECH S.A. Job/Inquiry No:

End User: HUARON Issued By: Miguel Ignacio
Customer PO No: Quotation No: MIN240440053
Item/Equip. No: ITEM 002 (Escenario 02) (Base Offer) Certified By:
Project No: Date: 06/28/2024
Service: Revision: 0
Operating Conditions Pump Performance
Liquid: Slurry Published Efficiency: 60.0 % Suction Specific Speed:
Temp.: 10.0 deg C Rated Pump Efficiency: 58.5 % Min. Hydraulic Flow: 31.87 m³/h
S.G./Visc.: 1.750/9.000 cp Rated Total Power: 56.4 hp Min. Thermal Flow: N/A
Flow: 130.00 m³/h Non-Overloading Power: 60.5 hp
TDH: 40.00 m Imp. Dia. First 1 Stg(s): 445 mm
NPSHa: NPSHr: Shut off Head: 42.50 m
Solid size: Max. Solids Size: 0.00 mm % Susp. Solids
(by wtg):
Vapor Press:
Notes: 1. Curve shown is at ambient temperature conditions.
2. Non Overloading power does not reflect v-belt losses.

Viscosity corrections have been performed in accordance with HI 9.6.7-2015

- NPSH curve shown above is at max RPM
 CANCELLATION SCHEDULE

Planned
Shipment Elapsed Time - Date of Order to Date of Cancellation (weeks)
(weeks)
0 2.01 4.01 6.01 8.01 12.01 16.01 20.01 24.01 28.01 32.01 36.01 40.01 44.01 48.01 52.01 56.01 60.01
to 2 to 4 to 6 to 8 to 12 to 16 to 20 to 24 to 28 to 32 to 36 to 40 to 44 to 48 to 52 to 56 to 60 64
Up to 8 20 50 75 100
8.01 to
12 15 40 60 80 100
12.01 to
16 10 25 45 60 85 100
16.01 to
20 10 15 25 45 65 85 100
20.01 to
24 10 10 20 25 50 70 90 100
24.01 to
28 10 10 15 20 25 50 70 90 100
28.01 to
32 10 10 10 15 20 35 60 75 90 100
32.01 to
36 10 10 10 15 20 25 50 60 85 95 100
36.01 to
40 10 10 10 10 15 25 50 60 70 85 95 100
40.01 to
44 10 10 10 10 15 25 45 55 65 80 90 95 100
44.01 to
48 10 10 10 10 15 25 45 55 60 65 80 90 95 100
48.01 to
52 10 10 10 10 15 20 40 50 55 60 70 85 90 95 100
52.01 to
56 10 10 10 10 15 20 35 50 55 60 70 80 85 90 95 100
Above
56 * * * * * * * * * * * * * * * * * *
Note: The above cancellation rates apply to manufactured equipment only. Any sub-supplier cancellation charges are not reflected above, and would apply accordingly.
* to Be Assigned