Zaber & Zubair Fabrics Ltd.

Fashion Testing Service, Pagar, Tongi, Gazipur-1710 DOC. NO. FTS-QSR-04-558

ISS. NO. / REV NO.: ' 01' / ‘03’
EFFECTIVE FROM: 27/06/2023
DEVELOPMENT (IOM) FABRIC TEST REPORT
Test Report No: FTS2024052519 Report Issue Date: 27.05.2024
PRODUCT INFORMATION
Buyer/ Supplier : BERSHKA Applicant : R&D-Development
IOM No. : 75239/2024 Sample Details : WOVEN FABRIC
70% CONVENTIONAL COTTON & 30% RECYCLED COTTON
Composition :
(PRE)
Emarizing : NON PEACH

Construction : (7+7)X7/2/74X26 Color TOBACO 705-01 Fabric Finish : REGULAR

Weave : OXFORD Claim Weight 420 g/m2 End Use : MENS BOTTOMS
Note: The results relate only to the items/samples tested and select requested parameters only.
TEST SPECIFICATION
*Tested & Reported according to “INDITEX QUALITY”: Woven Fabrics & Inhouse Facility*
S/L Test Name & Standards Tested on Tested Values Requirements Result

Dimensional Change Warp -1.5%

1. 1 After 1HL / Data
ISO 6330 Weft -2.0%
Spirality a/laundering- Twist
2. 2 After 1HL 1.2% / Data
ISO 16322-2
Color Change 4-5
Color Fastness to
3. 3Washing As Received Acetate Cotton Nylon Poly Acrylic Wool / Data
ISO 105 C06 Color Staining
4-5 4-5 4-5 4-5 4-5 4-5
Color Fastness to Color Change 4-5
4. 4Water As Received 3 Pass
ISO 105 E01 Color Staining 4-5 4-5 4-5 4-5 4-5 4-5
Color Change Acid: 4-5 Alkali: 4-5
Color Fastness to Color Staining
5. 5Perspiration As Received 4-5 4-5 4-5 4-5 4-5 4-5 3 Pass
(Acid)
ISO 105 E04 Color Staining
4-5 4-5 4-5 4-5 4-5 4-5
(Alkali)
Color Fastness to Dry Rubbing 4-5 3
6. 6Rubbing As Received Pass
ISO 105 X12 Wet Rubbing 4-5 2
Mass per unit Area- GSM As Received/
7. 7 B/W 420 A/W 428 / Data
ISO 3801 After 1HL
Warp 42.36 N
Tear Strength
8. 8 As Received / Data
ISO 13937-1 Weft 51.30 N

Tensile Strength Warp 740 N

9. 9 As Received / Data
ISO 13934-2 Weft 660 N

10. 1Seam Slippage Warp >200.0 N @ 6.0 mm

As Received / Data
0ISO 13936-1 Weft >200.0 N @ 6.0 mm
11. 1Fabric Width (Inch.)
As Received Overall 61.5 Cutable 60.5 / Data
1ISO 22198
12. 1Fabric Construction
As Received Ends 74 Picks 26 / Data
2ISO 7211-2
Note: (+) means extension and (-) means shrinkage. Grey scale rating of ISO 105 A02 and A03 is based on 5 steps of 1 to 5, where 1 is bad and 5 is good.

Md. Al Amin Arif Ishtiaq Md. Akram Hossain

Lab Technician Sr. Executive Deputy Manager
Prepared By Reviewed By Authorized By

_________________A SISTER CONCERN OF NOMAN GROUP_____________

Fashion Testing Services ISO/IEC 17025:2017 Accredited from BAB.
Feedback/Complaints/Suggestion: 'Md. Akram Hossain'
[email protected], [email protected]