QuickStart Guide

FortiSwitch T1024F-FPOE
FS-T1024F-FPOE
 The Essentials Package Contents
Secure your Network FortiSwitch T1024F-FPOE
FS-T1024F-FPOE
Register at https://support.fortinet.com for the latest threat protection updates

GUI
1 Connect Port 1 to an Ethernet port or USB-RJ45 adapter on your
computer using an Ethernet cable (not included)
2 Open a browser to https://192.168.1.99

CLI FortiSwitch Device QuickStart Guide 2x AC Power Cables 1x Console Cable

(RJ45 to USB)
1 Connect the provided console cable to the Console Port
2 Open a Terminal app using 115200-8-N-1

Default Logins
https://192.168.1.99 https://fortilan.forticloud.com
Username: admin Username: user-defined
2x Rack Mount Brackets 8x Bracket Screws 4x Rubber Feet
Password: leave blank Password: user-defined

Fortinet Documents Library

For getting started documentation, admin guides, up-to-date hardware
manuals and reference resources, visit https://docs.fortinet.com/

FortiLAN Cloud
Experience simplified cloud provisioning, zero touch deployment,
configuration management and reporting at https://fortilan.forticloud.com

2 3
 Setup

GUI FortiLink
https://19
2.168.1.9
Usernam 9
e: admin
No Passw
ord

MGMT
FortiSwitch Port FortiGate Port
Management Computer
Ethernet Cable Ethernet Cable

Note: For static IP configuration, use 192.168.1.1 with subnet mask

255.255.255.0
1 Login to the FortiGate and go to WiFi & Switch Controller -> FortiLink Interface

2 Add a FortiGate Port in the FortiLink interface

CLI
Speed (default): 115200 3 When the device is discovered, select Authorize
Data bits: 8
Stop bits: 1
Parity: None
Optional: To automatically authorize the device upon discovery, enable
Console Cable Flow Control: None
Automatically authorize devices in the FortiLink Interface settings

CONSOLE
Management Computer

Note: For a detailed CLI guide, visit docs.fortinet.com

Cloud Management (Connect a port to the Internet)

1 Visit https://support.fortinet.com for registration and cloud management license

2 Sign in at https://fortilan.forticloud.com to manage your Inventory List

4 5
 SFP Modules Rack Mount

Installation The recommended clearance is 1.5 inches above and below the device.

Cage Socket

SFP

Tx

Rx

Removal
Rack mount brackets may vary as shown above

Cage Socket
Caution: To avoid personal injury or damage to the device, it is
recommended that two or more people mount the device on a rack.

Lock
SFP
Desktop

1.5in 1.5in

1.5in
1.5in

Note: Place the device on a flat, clean and stable surface.

6 7
 Front FS-T1024F-FPOE

1 2 3 4 5

1 Ports 1 to 24 (RJ45) 802.3bt type4 4 USB (USB A) USB 2.0 server port
POE (Left LED) Activity/Link (Right LED)
Amber: Supplying PoE Green: Link established
Off: Not supplying PoE Flashing Green: Data activity 5 PWR1
Off: No link established Green: Power supply 1 supplying power
Flashing Amber: Power supply 1 failure
2 Ports 25 to 26 (QSFP28) Port 25 Top LED Row; Port 26 Bottom LED Row Off: Power supply 1 is disconnected
Single Port Speed (Left LED); Split Port Mode (LED x4) PWR2
Green: 100/40 Gbps link established Green: Power supply 2 supplying power
Flashing Green: 100/40 Gbps data activity Flashing Amber: Power supply 1 failure
Off: No link established Off: Power supply 2 is disconnected

SYSTEM
3 MGMT (RJ45)
Green: Operating normally
Speed (Left LED) Activity/Link (Right LED)
Flashing Green: Booting up
Green: 1 Gbps Green: Link established
Red: System failure
Amber: 100 Mbps Flashing Green: Data activity
Off: System is off
Off: 10 Mbps or not connected Off: No link established
POE MAX (up to 1440W)
Amber: Providing max PoE power
CONSOLE (RJ45) CLI management Off: PoE power available

FAN
Green: Operating normally
Amber: Fan failure
Off: Fan is off

8 9
 Rear FS-T1024F-FPOE

1 Power Supplies (x2) 100-240VAC, 50-60Hz, 10A-8A, redundant, hot-swappable

Green: Operating normally

Red: Power failure
Off: No power detected

10 11
 Cautions and Warnings Laser Class 1 optical transceiver shall be used only
L’émetteur-récepteur optique de classe 1 laser doit être utilisé uniquement

Environmental specifications IEC 60825-1:2014 transfer to FDA/CDRH Complies with FDA performance standards for laser products except for conformance with IEC 60825-1
Ed.3., as described in Laser Notice No. 56, dated May 8, 2019.
Ambient operating temperature: 0°C to 45°C
IEC 60825-1:2014 transfert à la FDA/CDRH Conforme aux normes de performance de la FDA pour les produits laser, à l’exception de la conformité à
Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions: la norme IEC 60825-1 Ed.3., comme décrit dans l’avis laser n° 56, daté du 8 mai 2019.
Instructions de montage en rack - Les instructions de montage en rack suivantes ou similaires sont incluses avec les instructions d’installation:
The SFP ports should use UL Listed Optional Transceiver product, Rated 3.3Vdc, Laser Class 1.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may Les ports SFP doivent utiliser un produit émetteur-récepteur en option répertorié UL, 3,3 Vdc, classe laser 1.
be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer. Fiber optic transceiver must be rated 3.3V, 22mA max, Laser Class 1, UL certified component.
Température ambiante élevée – S’il est installé dans un rack fermé ou à unités multiples, la température ambiante de fonctionnement de Le transceiver optique doit avoir les valeurs nominales de 3.3 V, maximum 22 mA, Laser Class 1, homologué UL
l’environnement du rack peut être supérieure à la température ambiante de la pièce. Par conséquent, il est important d’installer le matériel dans un
environnement respectant la température ambiante maximale (Tma) stipulée par le fabricant. Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An
improperly wired socket outlet could place hazardous voltage on accessible metal parts.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is
Avertissement: Équipement de classe I. Cet équipement doit être mis à la terre. La fiche d’alimentation doit être connectée à une prise de terre
not compromised.
correctement câblée. Une prise de courant mal câblée pourrait placer une tension dangereuse sur les pièces métalliques accessibles.
Ventilation réduite – Installation de l’équipement dans un rack doit être telle que la quantité de flux d’air nécessaire au bon fonctionnement de
l’équipement n’est pas compromise.
Warning: All Ethernet cables are designed for intra-building connection to other equipment. Do not connect these ports directly to communication
wiring or other wiring that exits the building where the appliance is located.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical
Avertissement: Tous les câbles Ethernet sont conçus pour une connexion intra-bâtiment à d’autres équipements. Ne connectez pas ces ports
loading.
directement au câblage de communication ou à tout autre câblage qui sort du bâtiment où se trouve l’appareil.
Chargement Mécanique – Montage de l’équipement dans le rack doit être telle qu’une situation dangereuse n’est pas lié à un chargement
mécanique inégal.
Regulatory Notices
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the
circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when
Federal Communication Commission (FCC) – USA
addressing this concern.
Surtension – Il convient de prendre l’ensemble des précautions nécessaires lors du branchement de l’équipement au circuit d’alimentation et être
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
particulièrement attentif aux effets de la suralimentation sur le dispositif assurant une protection contre les courts-circuits et le câblage. Ainsi, il est
(1) this device may not cause harmful interference, and
recommandé de tenir compte du numéro d’identification de l’équipement.
(2) this device must accept any interference received; including interference that may cause undesired operation.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
other than direct connections to the branch circuit (e.g. use of power strips).
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
Fiabilité de la mise à la terre – Fiabilité de la mise à la terre de l’équipement monté en rack doit être maintenue. Une attention particulière devrait
generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause
être accordée aux connexions d’alimentation autres que les connexions directes au circuit de dérivation (par exemple de l’utilisation de bandes de
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
puissance).
user will be required to correct the interference at his own expense.
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude)
WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage,
authority to operate the equipment
humidité et l’altitude).

Safety Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada

CAN ICES-003 (A) / NMB-003 (A)

Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used
batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications.
Batterie – Risque d’explosion si la batterie est remplacée par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites
usagées conformément aux réglementations locales. IMPORTANT: Suisse: l’annexe 4.10 de SR814.013 s’appliquent aux batteries. dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

警告
本電池如果更換不正確會有爆炸的危險 European Conformity (CE) - EU
請依製造商說明書處理用過之電池
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
CAUTION: adequate measures.
There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type.
Dispose batteries of according to the manufacturer’s instructions.
Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion.
Leaving a battery in an extremely hot environment can result in leakage of flammable liquid, gas, or an explosion.
If a battery is subjected to extremely low air pressure, it may result in leakage of flammable liquid, gas, or an explosion.
Voluntary Control Council for Interference (VCCI) – Japan
WARNUNG:
Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen Sie nur den gleichen oder gleichwertigen Typ. Batterien gemäß この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求
den Anweisungen des Herstellers entsorgen. されることがあります。
Beseitigung einer BATTERIE in Feuer oder einen heißen Ofen oder mechanisches Zerkleinern oder Schneiden einer BATTERIE, die zu einer ＶＣＣＩ－Ａ
EXPLOSION führen kann
Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder
Gas führen kann Product Safety Electrical Appliance & Material (PSE) – Japan
Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder
Gas führen kann. 日本では電気用品安全法(PSE)の規定により、同梱している電源コードは本製品の専用電源コードとして利用し、他の製品に使用しないでください。

Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE networks without
routing to the outside plant. Bureau of Standards Metrology and Inspection (BSMI) – Taiwan
Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101. Ce produit est uniquement connecté aux réseaux PoE sans
installation externe de routage. The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below:
限用物質含有情況表 (RoHS Table) 請到以下 網址下載：
CAUTION: Shock Hazard. Disconnect all power sources. https://www.fortinet.com/bsmi
ATTENTION: Risque d’électrocution. Débranchez toutes les sources d’alimentation.
警告： 為避免電磁干擾，本產品不應安裝或使用於住宅環境。
Grounding — To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge
請仔細閱讀以下說明
protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition 本設備勿置於潮濕處。
to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing. 連接至電源前，請先檢查電壓。
Mise à la terre — Pour éviter d’endommager votre matériel, assurez-vous que les branchements qui entrent à partir de l’extérieur du bâtiment passent 當設備不用時，請將所有電源線拔除，避免電壓不穩而造成傷害。
par un parafoudre / parasurtenseur et sont correctement mis à la terre. Utilisez un poste de travail de décharge électrostatique (ESD) et / ou portez 勿將任何液體濺入設備中，避免線路短路。
un bracelet anti-statique lorsque vous travaillez. Ce produit possède une borne de mise à la terre qui est prévu à l’arrière du produit, à ceci s’ajoute la 基於安全理由，只有受到專業訓練的從業人員，才可以打開本設備。
mise à la terre de la prise. 請勿自行調整或修理已通電的設備，以確保您的安全。
如不小心受傷，請立刻找急救人員給予您適當的救護，千萬別因傷勢輕微而忽略自己的傷勢。

12 13
 請依照台灣法規處置電池。
若不正確替換電池可能導致爆炸危險，替換電池時，請使用設備生產商推薦使用的電池。
請勿拆卸、刺穿或以其他方式損壞電池。

雷射設備非用戶維修設備，請與生產商聯繫維修事宜。

注意: 要斷開電源，請將所有電源線從本機上拔下

英屬蓋曼群島商防特網股份有限公司台灣分公司
地址：台北市內湖區行愛路176號2樓
電話：(02) 27961666

China
警告: 在居住环境中，运行此设备可能会造成无线电干扰。

Agência Nacional de Telecomunicações (ANATEL) – Brazil

CISPR 22
Este produto não é apropriado para uso em ambientes domésticos, pois poderá causar interferências eletromagnéticas que obrigam o usuário a tomar medidas
necessárias para minimizar estas interferências.

14 15
August 21, 2024

Copyright© 2024 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law
trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics
contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified
in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same
ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf

FortiSwitch-T1024F-FPOE-QSG-20240821