9 - 13
Sales, Service & Distribution Center
Newark, NJ 07105
Phone: 973-589-9150 Fax: 973-589-4432
Manufacturing, Sales, Service & Distribution Center
Toledo, OH 43605
Phone: 419-691-2491 Fax: 419-693-3806
ISO-9001 Registered Quality System. Sales and Tech Service Support
ISO-21469 Compliant. Phone: 1-800-733-4755
PRODUCT DATA
LUBRIPLATE UTF BIOBASED GREEN
DESCRIPTION Typical Test Data – See Back
LUBRIPLATE UTF Biobased Green is a universal tractor
fluid that incorporates Stabilized* additive technology SPECIFICATIONS
with biodegradable vegetable based stocks. This
formulation contains special frictional modifiers for the Meets and exceeds universal tractor specifications
Wet Brake’s equipment design and is compounded with for OEMS.
detergent, dispersant, anti-wear, anti-rust and anti-foam
inhibitors. LUBRIPLATE UTF Biobased Green is an John Deere – J20C, J14A, Quantrol™, J20D
ultimately biodegradable 1, multi-grade lubricant that can Ford – M2C134-D, M2C86-C, M2C86-B, M2C41-B,
be used in agricultural, industrial and construction M2C48-B, M2C53-A, M2C134-A, M2C134-B, M2C134-C
equipment and has proven field performance.
Massey-Ferguson – M1135, M1141, M1110, M1127,
ADVANTAGES M1129-A
Kubota
LUBRIPLATE UTF Biobased Green is an
ENVIRONMENTALLY RESPONSIBLE hydraulic fluid Steiger
that is formulated from renewable, agricultural plant Versatile
resources. We believe Earth’s environmental future Case International – JIC-145/MS-1210, JIC-185/MS-
rests in the use of renewable materials. 1204, MS-1205, MS-1127, M1129-A
High Oleic Base Stocks (HOBS) are agricultural White Farm – Q-1826, Q-1705, Q-1766, Q-1802
vegetable oils. This Stabilized technology allows the
HOBS to perform as a high performance formula in high Duetz-Allis
and low temperature applications, reducing oil thickening Landini
and deposits.
Fiat-Hesston
1
Ultimate Biodegradation (Pw1) within 28 days in ASTM
D-5864 Aerobic Aquatic Biodegradation of Lubricants Transmission OEM’s – ATD Allison C-4
APPLICATIONS
Meets or exceeds all of the requirements of John Deere’s PACKAGING AVAILABLE Part No.
Hygard (Specification J20-C); Allison C-3, Cat TO-2 and
API GL-4, Low-Speed/High Torque. 5 Gallon Pail L1072-060
55 Gallon Drum L1072-062
TEST TYPICAL SPECIFICATION
PROPERTY
METHOD RESULTS* LIMITS
Viscosity @ 100ºC ASTM D-445 10.26 9.10 min.
Viscosity @ 40ºC ASTM D-445 47.8 None
Viscosity Index ASTM D-2270 210 140
Shear Stability Orbahn
ASTM D-6278 9.38 9.10 min.
Vis. @ 100ºC (after shear)
Brookfield Viscosity @ -20ºC ASTM D-2983 1,650 4,500 max.
5,500 per J. Deere @ -35ºC 11,150 70,000 max.
Flash Point, ºC ASTM D-92 251 200 min.
Stable Pour Point, ºC ASTM D-5950 -39 -37 max.
Oxidation Stability: Evaporation Loss JDQ 16 0.65% 5.0% max.
Viscosity Increase @ 100ºC 5.02% 10.0% max.
Viscosity Increase @ 40ºC 4.0 ***
Sludge Formation None None
Additive Separation None None
Rust Protection JDQ 22 >100 100 hrs. min.
Copper Corrosion JDQ 32 1A 1B max.
Foaming Characteristics: Sequence I JDQ 33 40/0 25/0 ml. max
Foam Breaktime 82 30 sec. max.
Sequence II 0/0 50/0 ml. max.
Foam Breaktime 0 30 sec. max.
Sequence III 30/0 25/0 max.
Foam Breaktime 0 30 sec. max.
Water Sensitivity: Solids JDQ 19 0.0 0.1% v max.
Additive Loss 0.0 15.0% wt. max.
Extreme Pressure Properties:
JDQ 34 0.5 mg. 1.5 mg. max
Timken Abrasion Mass Loss
Timken OK Load 73 N 45 N min.
Rubber Compatibility: Volume Change JDQ 9 +1 0 to +5%
Hardness Change -0.5 0 to -5 pts.
Precipitation None Trace
Rubber Compatibility
+2.5 0 to +5%
Reference 69X311111: Volume Change
Hardness Change -1.5 0 to -5
Precipitation None None
Oil Compatibility: Additive Separation JDQ 23 None None
Foaming Characteristics: Sequence I ASTM D 892 0/0 25/0 ml. max
Foam Breaktime 0 30 sec. max.
Sequence II ASTM D 892 0/0 50/0 ml. max.
Foam Breaktime 0 30 sec. max.
Sequence III ASTM D 892 0/0 25/0 ml. max
Foam Breaktime 0 30 sec. max.
TEST TYPICAL SPECIFICATION
PROPERTY
METHOD RESULTS* LIMITS
Oxidation Stability: Evaporation Loss JDQ 16 1.6 5.0% max.
Viscosity Increase @ 100ºC 6.0 10.0% max.
Viscosity Increase @ 40ºC 9.8 ***
Sludge Formation None None
Additive Separation None None
Low Temperature Fluidity
JDQ 73/74 27 Secs. 30.0 sec. max *
Cold Soak @ -35ºC
Slow Cool @ -30ºC 30 mm in 3 secs. 30.0 sec. max *
@ - 35ºC flow in 30 secs 30 mm in 11 secs 10.0 mm min.**
*Must flow 30 mm in a maximum of 30 seconds to pass.
**Must flow at least 10 mm in 30 seconds to pass.
PST Clutch Friction: Total Cycles JDQ 94 2,000 2,000
Initial Friction Coefficient 0.077 0.15 max.
Final Friction Coefficient 0.105 0.08 min
Stall Time (sec.) 1.77 5.0 max
Disk #1 Wear (mm) 0.178 0.38 max.
Disk #2 Wear (mm) 0.174 0.38 max.
Disk #3 Wear (mm) 0.254 0.38 max.
Disk #4 Wear (mm) 0.178 0.38 max.
Shear Stability: Viscosity @ 100ºC JDQ 102 10.51
Viscosity @ 100ºC (sheared) 9.38
% Viscosity Loss 10.8%
Spiral Bevel/Final Drive Gear Wear
JDQ 95 None No Scoring
Gear Surface Condition: Pinion
Ring None No Scoring
Spiral Bevel Rating 9 Scale of 1-10, 10 = Best
Sun Pinion Wear: Left Side Average <0.025 <0.025
Right Side Average <0.025 <0.025
Sundstrand Hydraulic Pump Equal to or better than
JDQ 84 3.9%
Flow Degradation reference which is -2.0%
JDQ 96 Brake Torque Variation and Friction
Cycles Computer Results Relative Capacity Torque Variation SwRI Variation
1,000 293,131 44,470 559,780
10,000 308,090 36,730 424,130
20,000 310,651 36,220 421,620
30,000 312,768 42,380 506,220
Total 1,224,640 159,800 1,911,750
Printed in USA
Revised 9/14/2023
