Scribd
Upload
2 views

MS 101 ME LAB 1-Assignment-moodle

The document outlines a lab assignment for the MS-101 (Makerspace) course at IIT Bombay for Spring 2025, focusing on visualization techniques. It includes tasks such as creating isometric sketches, rotating objects, and sketching cross-sections based on given plans. The assignment is divided into sections with specific point allocations for each task.

Uploaded by

Kushal Putti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

MS 101 ME LAB 1-Assignment-moodle

The document outlines a lab assignment for the MS-101 (Makerspace) course at IIT Bombay for Spring 2025, focusing on visualization techniques. It includes tasks such as creating isometric sketches, rotating objects, and sketching cross-sections based on given plans. The assignment is divided into sections with specific point allocations for each task.

Uploaded by

Kushal Putti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

MS-101 (MAKERSPACE)

Spring 2025
IIT Bombay

LAB (1) - VISUALIZATION


20 Points

NAME:
RLL NO:
DEPARTMENT:
BATCH:

1
1. [2 points] On isometric grid paper, create isometric sketches of the following objects.
(a) A 6×6×3 block with a through hole of diameter 4 centered on the 6×6 side.
(b) A cylinder of diameter 4 and length 6 with its longitudinal axis parallel to the
y-axis.
2. [3 points] On isometric grid paper, create isometric sketches from the following coded
plans. (Note: the numbers indicate the height of the blocks)

(a) (b) (c)

3. [3 points] On isometric grid paper, sketch the indicated corner view (marked with an
X) as per the given coded plans.

(a) (b)

2
4. [4 points] The object shown (left) is rotated by -90 degrees about the y-axis to obtain
the rotated view (right). Such a rotation reveals more details about the object. Note
that only the object rotates, while the coordinate axes remain fixed.

Similarly, rotate the object sequentially in increments of 90 degrees about the axes
indicated.
Arrows indicate the direction of rotation. Sketch the results of each rotation for
both sections (a & b) on isometric grid paper.

(a) (b)

5. [3 points] Sketch the cross-section obtained between the intersection of the object and
the corresponding cutting plane shown. Draw on top of the object image itself.

3
6. [2 points] Sketch (on top of the given figures) the result of combining the following
objects by the indicated method.

(a) (b)

7. [3 points] Triangular volume A, triangular volume B, and rectangular volume C are


shown intersecting in space. On the dashed outline drawings, darken and add edges to
show all visible edges of the final volume created by the indicated Boolean
operations.

You might also like