200kVA
200kVA
ATC
ATC200, DIESEL GENSET
Cummins Engine
Designed with Safety in Mind
The fully GMSC Range generator set powered by the Cummins engines which manufacturing in USA & UK
Cummins water cooled Diesel engine, oil and fuel filter fitted, water separator, Lube-oil drain valve fitted.
GENSET SPECIFICATION
Cast Iron Skirted Block: With main bearing supports between each Turbocharger: Holset exhaust gas
Cylinder , for maximum strength and rigidity, low weight, and optimum driven turbocharger mounted at top of
crank shaft support. engine. Turbocharging provides
increased power,
Compact Size: For ease of installation and easy access for routine improved fuel economy, altitude
maintenance. compensation, and lower smoke and
noise levels.
Direct Fuel Injection System: With high swirl intake ports for thorough
mixing of air and fuel to provide low fuel consumption. Filters.
Air cleaner with dry element and
Forged Steel, I-Beam Cross Section Connecting Rods: restriction indicator.
With angle split cap-to-rod interface and cap screw attachment Spin full flow lube oil filter.
For maximum structural strength and ease of service.
Cooling
Starting :24 volt negative earth. battery charging alternator 35 amp on Oil cooler, Drain Tap
engine. Cranking current 640 amps at 0 oc.
Fuel System
24 volt fail safe actuator. Spin-on paper element fuel filters with Bosch
fuel pump injection system with integral
Electronic governor. Dual flexible fuel lines
And connectors. Standard fuel water separator.
GENSET SPECIFICATION
AC ALTERNATOR
EUROPEAN TYPE GENERATOR END
EUROPEAN TYPE has a long history of producing Alternator Technical Data
high-quality reliable products for the power generation
Generator Frame 18/22
market. Their portfolio of high quality generator ends is
Exciter Brushless
recognized as an industry standard.
Cooling Fan Cast alloy aluminum
Bearing Single, double shielded
Alternator Technical Data
Windings 100% copper
European Type AC alternator Connection Type Reconnectable
● Brushless, self exciting Insulation Type Class H
● Class ‘H’ insulation
Pitch 2/3
● Standard degree of protection is IP23
● Self regulating Amortisseur Winding Full
● With fan cooling Voltage Regulator AS440 / R250
● Resist humid grease Voltage Regulation NL - FL ± 1.5%
● AC excitation, rotating rectification tube
Underspeed Protection Standard
● Stator grease insulation covered
● Rotator and excitation high polymer, Resist the Overexcitation Protection IP23
corruption of oil and acid. Standards NEMA, IEC, IEEE, CSA, BS
● Rotator balance is in accordance with BS5625 Phase Sequence A(U), B(V), C(W)
standard 12.5
● High-quality lubrication sealed long-time bearing TIF (1960 Weightings) <50
● Rotator silicon steel close tight Excitation System PMG - optional
CONTROL PANELS
DEEPSEA ELCTRONICS CONTROL PANEL DSE-7320 / 7420
The Model 7320 / 7420 is an Multiple alarm channels ►Fully PC or front panel configuration
Automatic ► Under/Over speed ►Automatic engine starting & stopping
Engine Control Module which has ► Charge alternator failure ►Automatic shutdown on fault
been designed to allow the OEM to ► Emergency stop condition
meet demand for increased ► Low oil pressure ►Custom graphical icon type display
capability within the industry. The ► High engine temperature ►Provides
module has been designed to ► Fail to start engine and
automatically start and stop the ► Fail to come to rest generator
engine, indicating the operational ► Loss of speed sensing signal instrumen
status and fault conditions, shutting tation
down the engine and indicating the Digital Inputs ►Provides
engine failure by means of a ► Emergency Stop - A N/C DC engine
graphical LCD display and a flashing positive input alarms and
LED on the front panel. ► 5 fully configurable warning or status
Selected operational timers and shutdown inputs. informatio
alarms can be adjusted by the n
customer. Metering ►LED &
Generator Volts L1-N, L2-N, L3-N LCD alarm
Configuration of the module can be Generator Volts L1-L2, L2-L3, L3-L1 indication
carried out manually utilising the Generator Amps L1,L2, L3 ►Compatible with 5200, 5300 and
front panel editor, or alternatively by Generator Frequency Hz 5500 series modules for easy
PC, using the 7320 / 7420 software. Engine Speed RPM upgrade path.
Operation of the module is via Engine Oil Pressure (PSI & Bar)
pushbuttons mounted on the front Engine Temperature (°C &°F)
panel with STOP, AUTO and Plant Battery Volts
MANUAL modes. Engine Hours Run
A further pushbutton provides an Control Panel By:
LCD DISPLAY SCROLL function to
view the instrumentation. FEATURES
►Micro-processor based design
OPTIONAL FEATURES
►Low fuel level alarm shutdown ►Protection for Alarm Module &
►Automatic Fuel Filling System Auxiliary Relay
►Engine Oil Heater ►Circuit Breaker MCCB & ACB
►Remote Radiator ►Mains auto-charger
►Charge Voltmeter ►Engine/Alternator Heaters
►Charge Ammeter ►Trailer
►Critical Silencer ►Enclosures or Soundproof Canopy
►PMG ►Manual Sump Oil Drain Pump
►Tool Kit ►Packing-Export Box
►Residential ►And More
Silencer
►Auto Transfer Voltage Connections
Switch (ATS) 277/480V,3 Phase
►Earth Fault Relay 254/440V,3 Phase
►Remote Monitor 240/416V,3 Phase
Interface 230/400V,3 Phase
►Protection for Alarm Module & Auxiliary Relay 220/380V,3 Phase
►Parallel Control Panel 127/220V,3 Phase
►Circuit Breaker MCCB & ACB 115/200V,3 Phase
►Remote Control Panel 110/190V,3 Phase
Control your
generator
remotely
DIMENSIONS
Open Model Excluding option
Overall size (L*W*h), mm:
2300*1000*1580
Weight (kg):1764
Enclosure Unit
Overall size (L*W*h), mm:
3300*1355*1980
Weight(kg):2570
In line with our policy of continuous product development, we reserve the right to change specification without notice.
www.powerbritish.co.uk