Scribd
Upload
43 views2 pages

(Est110)Graphics, January 2021

Uploaded by

ameen1sam2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views2 pages

(Est110)Graphics, January 2021

Uploaded by

ameen1sam2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

c 0000EsT110121901

RegNo.:
\1t :! r -,t i;€
APJ ABDUL KALAM TECI{NOLOGICAL
B.Tech Sl (Special Improvement) ExaminationJanuary 2021

Course Code: ESTl10


Course Name: ENGINEERING GRAPHICS
(2019-Scheme)
Max. Marks: 100 Duration:3 Hours

It Instructions: Retain Construction lines. Show necessary dimensions. Answer any


ONE question from each module. Each question carries 20 marks.
I
Module-I
A line AB 60 mm long has its end A 30 mm above HP and 25 mm in front of
VP. The top view and front view have lengths of 40 mm and 55 mm
respectively. Draw its projections and find the true inclinations of the line with
HP and VP. Also locate its traces.
The projectors drawn from VT and end A of line AB are 40 mm apart. End A is

15 mm above HP and 25 mm in front of VP. VT of line is l0 mm below HP. If


line is 75 mm long, draw its projections and find inclinations with FIP and VP.
Module-Il
A square pyramid side of base 35 mm and altitude 65 mm is kept with a side of
base parallel to VP and the triangular face containing that side of base being
vertical. Draw the projections of the pyramid such that the base is visible in the
front view.
A pentagonal'prism base side 20mm and height 60mm is resting on one of the
base edges in such a way that the base makes an angle of 30o with HP and the
edge on which the prism rests makes an angle 30o with the VP. Draw its
projections.

Module-III
A pentagonal pyramid having base with 30 mm side and axis 70 mm long is
resting on its base in the HP with an edge of the base nearer to the VP and
parallel to it. A vertical section plane inclined at 450 to the VP cuts the pyramid
at a distance of 8 mm from the axis. Draw its sectiqnal front view, top view and
true shape of the section.

Page I of2

Downloaded from Ktunotes.in


0000EST110121901

A cone with 50'mm base diameter and 70 mm long axis rests on its base on the

HP. Draw the development of its lateral surface when it is cut by an auxiliary
inclined plane bisecting the axis and inclined at 450to the FIP.
Module-fV
A cylinder 50mm base diameter and axis 60mm long is resting on its base on the

HP. It is surmounted centrally by a sphere of 40 mm diameter. Draw the


isometric view ofthe solids.
'i,8 A hemisphere of diameter 80mm is resting on the ground with its flat surface
facing upwards. A square pyramid having side of base 40mm and axis 60mm is

c. resting on its base centrally on the top of the flat face of the hemisphere. Draw
the isometric view of the combination of the solids.

Module-V
A hexagonal prism 25 mm side and 50mm long is lying on one of its rectangular
face on the ground plane. The station point is 80 mm in front of the picture
plane, 65mm above the ground plane and lies in a central plane which is 70 mm

to the right of the axis of the prism. Draw the perspective view of the prism if
one of the hexagonal faces of the prism is on the picture plane.

l0 Draw the top view, front view and any one side view of the figure shown below.
The front view direction is marked as X. Any missing dimension may be
suitablv assumed.

(5x20=100 Marks)
****

Page2 of2

Downloaded from Ktunotes.in

You might also like