BERNT LORENTZ GmbH

Siebenstuecken 24 Tel: +49-(0)4193 8806-700

D-24558 Henstedt-Ulzburg Fax:
www.lorentz.de [email protected]

Sunday, 19 January 2025

Nuwakot, Krishna Adhikari,9843822156

Solar pumping project

Note: Designed as per phone call with Krishna adhikari.

Parameter
Location: Nepal, Dhading (27° North; 84° East) Water temperature: 25 °C
Required daily output: 150 m³; Sizing for average month Dirt loss: 5.0 % Motor cable: 100 m
Pipe type: steel Static head: 230 m Pipe length: 2,000 m

Products Quantity Details

PSk2-40 C-SJ30-35 1 pc. Submersible pump system including controller with DataModule, motor and pump end
CS6W- 550MS 80 pc. 44,000 Wp; 16 x 5 modules; 27 ° tilted
Motor cable 100 m 25 mm² 3-phase cable for power and 1-phase cable for ground
Pipeline 2,000 m 100 mm (inner diameter) Pipeline
Accessories 1 set Well Probe V2, PV Combiner 1000-125-4, SmartPSUk2-40, SmartStart, Surge Protector2

SunSwitch setting in PumpScanner min. 300 W/m²

Daily output in average month 159 m³
Daily values Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Av.

Output [m³]

Energy [kWh] 234 264 281 269 243 202 161 171 185 243 259 241 229
Irradiation [kWh/m²] 5.7 6.5 7.2 6.9 6.2 5.1 4.0 4.3 4.6 6.1 6.4 5.9 5.8
Rainfall [mm] 0.60 0.57 0.73 1.7 4.4 10 17 14 10 2.5 0.27 0.47 5.3
Ambient temp. [°C] 10 13 18 21 22 22 22 22 21 18 14 11 18

Hourly values 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00

Output [m³/h]

Energy [kWh] 0.76 6.6 14 21 27 30 31 30 26 21 14 6.4 0.74

Irradiation [kWh/m²] 0.018 0.16 0.34 0.52 0.67 0.77 0.80 0.77 0.67 0.52 0.34 0.16 0.018
Ambient temp. [°C] 13 13 14 16 18 20 22 23 23 23 23 22 22

Created by LORENTZ COMPASS 3.1.0.240

1/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
 BERNT LORENTZ GmbH
Siebenstuecken 24 Tel: +49-(0)4193 8806-700
D-24558 Henstedt-Ulzburg Fax:
www.lorentz.de [email protected]

Sunday, 19 January 2025

Nuwakot, Krishna Adhikari,9843822156

Solar pumping project

System characteristic

Min. 800 W/m², 20 °C Max./STC*

PV generator Cell temperature [°C] 46 25
Temperature loss [%] 7.1 -
Dirt loss [%] 5.0 -
Pmax [Wp] 31,050 44,000
Vmp [V] 620 667
Imp [A] 50 66
Voc [V] 735 794
Isc [A] 54 70
Pout [W] 31,050 -
Vout [V] 619 -
Iout [A] 50 -
Motor cable Power loss [%] 1.2 2.1 2.2
Pump systems Motor power [W] 11,550 30,400 34,750
Motor voltage [V AC] 295 364 380
Motor current [A] 26 55 60
Motor speed [rpm] 2,200 2,715 2,840
Frequency [Hz] 39 48 50
Flow rate [m³/h] 0.37 26 29
Efficiency [%] 2.0 57 57
Pipeline Flow speed [m/s] 0.013 0.92 1.0
Friction loss [m] 0.009 20 25
*STC: Standard test conditions for photovoltaic modules, 1000 W/m² solar iradiance, 25 °C cell temperature

Created by LORENTZ COMPASS 3.1.0.240

2/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
 BERNT LORENTZ GmbH
Siebenstuecken 24 Tel: +49-(0)4193 8806-700
D-24558 Henstedt-Ulzburg Fax:
www.lorentz.de [email protected]

Sunday, 19 January 2025

Nuwakot, Krishna Adhikari,9843822156

Solar pumping project

Wiring diagram

Created by LORENTZ COMPASS 3.1.0.240

3/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
 BERNT LORENTZ GmbH
Siebenstuecken 24 Tel: +49-(0)4193 8806-700
D-24558 Henstedt-Ulzburg Fax:
www.lorentz.de [email protected]

Sunday, 19 January 2025

Nuwakot, Krishna Adhikari,9843822156

Solar pumping project

System Layout

1: PSk2 Controller 11: Float Switch

2: Submersible Pump 12: PV Protect
3: Stilling Tube 13: PV Combiner
4: Well Probe 14: PV Disconnect
5: Cable Splice Kit 15: PV Module for Sun Switch
6: Grounding Rod 16: PV Generator
7: Surge Protector* *It is recommended to install a Surge Protector at each
controller sensor input.
8: Safety Rope
9: Water Meter
10: Pressure Sensor

Created by LORENTZ COMPASS 3.1.0.240

4/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
 BERNT LORENTZ GmbH
Siebenstuecken 24 Tel: +49-(0)4193 8806-700
D-24558 Henstedt-Ulzburg Fax:
www.lorentz.de [email protected]

Sunday, 19 January 2025

Nuwakot, Krishna Adhikari,9843822156

Solar pumping project

Sizing Layout

H (Static head): Vertical height from the dynamic water level to the highest point of delivery.
B (Drawdown): Lowering of water level depending on flow rate and recovery rate of the well.
D (Pipeline inner diameter)
L (Pipe length): Entire pipeline from the pump outlet to the point of delivery. Ellbows and armatures must be added as an
equivalent length of pipeline.
M (Motor cable): The cable between controller and pump unit.
T (Tilt angle): Angle of the PV generator surface from the horizontal plane.

Created by LORENTZ COMPASS 3.1.0.240

5/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
 Well Probe V2
Mechanical float switch for dry run protection of LORENTZ solar pumps
The well probe provides a reliable method of run dry protection for LORENTZ pumps. The well probe
detects that water is present within a well, tank or other water source. The well probe is typically
attached to the riser pipe above the pump and connected to the controller. When the well probe
becomes dry (water level is below the probe) the pump switches off to avoid dry running.

Order Information
Item no.: 19-000005 Product name: Well probe sensor V2

Features
 Reliable dry run protection
 Simple to install using 3 cable ties
 Improved tolerance to dirt
 Splicing kit and cable ties for fixing are included

Technical Data
 Max. operating temperature 55°C
 Enclosure class: IP68
 Submersion depth: max 50 m (164 ft)
 Cable length: 1.5 m
 Wire size: 2 x 0.50 mm² or AWG 20, waterproofed
 Must be mounted in a vertical position
 Meets the requirements for CE

Dimensions / Weight
 Packaging dimensions: 255 x 170 x 40 mm
10.0 x 6.7 x 1.6 in
 Total weight: 0.1 kg / 0.2 lbs

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
V181107

Tel +49 (0)4193 8806-700, www.lorentz.de

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 PV Combiner 1000-125-4
Connection box or parallel PV wiring
Description
An outdoor rated, combining connection box that
allows up to 4 strings of PV modules to be con-
nected safely to a solar pump system.
This product is typically used to combine strings
from multiple LORENTZ 1000-40-5 PV Discon-
nects.

Features
ƒ Combining function, allows 4 strings to be con-
nected to the solar pump system
ƒ Robust weather proof housing designed to

photo may differ from actual product

make installation simple
ƒ Lockable for additional protection
ƒ Tool required to open the housing
ƒ Designed to be used with LORENTZ PSk range
of systems

Ordering and shipping information

ƒ Item no: 19-000122
ƒ Product name: PV Combiner 1000-125-4
ƒ Packed volume: 0.015 m3 (0.54 ft3)
Technical data / Specifications
ƒ Packed weight: 2.75 kg (6.1 lbs)
Maximum voltage 1000 V DC
Maximum current per string 125 A
Maximum total current 125 A
Number of strings. 4
Approvals and standards
Input cables 10 - 35 mm2 AWG 8 - 2
Output cables 10 - 35 mm2 AWG 8 - 2
PG glands (input) 8 x PG16
PG glands (output) 2 x PG16
Environmental protection IP68 NEMA6
Housing material Polycarbonate

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
Tel. +49 (0) 4193 8806 - 700, www.lorentz.de
V210201

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 Mounting options
ƒ Wall mount using 4 holes with weather
protection
ƒ Designed for optional pole mounting. Mounting
points are pre-marked inside the housing.

Dimensions and weight

ƒ See diagram for mm sizes
ƒ Max height 215 mm (8.66“)
ƒ Max width 307 mm (12.1“)
ƒ depth 140 mm (5.5“)
ƒ Weight 2.2 kg (4.8 lbs)

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
Tel. +49 (0) 4193 8806 - 700, www.lorentz.de
V210201

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 SmartPSUk2-40
AC/DC Converter to Supply PSk2 Pump Systems
with Power from a Generator or Grid Supply
Description Features
The SmartPSUk2-40 automatically blends power ƒ Provides DC power to PSk2 pump controllers
from solar and external sources, only using the ex- from AC and DC sources
ternal source where the demand for water requires ƒ Blends solar power (DC) with AC power from
it. This is not a switching system that switches the grid or generator
between sources but effectively blends power so
ƒ Part of the PSk2 SmartSolution for hybrid
that only the power that is needed is demanded
powering of water pumping systems
from the non-solar source. For a hybrid generator
solution, this means running at partial load, for a ƒ Data link to PSk2 controller for control and
hybrid grid solution this means using kWh from monitoring
the grid as a top up. ƒ Integrated overheat protection and active
cooling

photo may differ from actual product

Ordering and shipping information Approvals and standards
ƒ Packing dimension: 560 x 400 x 340 mm (22.0 The AC/DC converter has the following standards:
x 15.7 x 13.4 in) ƒ Meets the requirements for CE
ƒ Packed weight:18 kg (39 lbs)
ƒ See next page for item numbers and variants

SmartSolution OVERVIEW
PSk2 controller SmartPSUk2 SmartStart generator

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
Tel. +49 (0) 4193 8806 - 700, www.lorentz.de
V201110

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 Order information Mounting options

Item number Description ƒ The SmartPSUk2-40 comes with a cable to

connect to the PSk2 Controller (1.00 m) and a
19-002585 SmartPSUk2-40 back plate for mounting on non-flat surfaces.

Dimensions and weight

Technical data / Specifications
ƒ Weight 18kg (39 lbs)
3-Phase AC input 380 – 415 V (± ƒ W1 320mm (12.6“) W2 290mm (11.4“) H 500mm (19.7“)
10 %) H1 450mm (17.7“) H2 421mm (16.6“) D1 226mm (8.9“)
50 Hz/60 Hz d 9mm (0.35“)
max. 38 kW (48
kVA)
DC output Umax = 850 V DC
Imax = 70 A
PV max open circuit voltage: 850 V DC
Environmental protection IP54
Housing material Stainless steel po-
wered coated case
Ambient Temperature -10 to 50°C

W1 D1 W2
d
H1

H2
H

SCALE 1 : 10 SCALE 1 : 10 SCALE 1 : 10

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
Tel. +49 (0) 4193 8806 - 700, www.lorentz.de
V201110

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 SmartStart
Automatic Remote Diesel Generator Switching Device

Description

The SmartStart can automatically

and remotely start and stop diesel
generators for hybrid solar pumping.
It has a secondary auxiliary output for
switching other devices (only usable
with PSk2). It connects to PSk2 or PSk3
Controllers and to the remote switch
input of the diesel generator.

photo may differ from actual product

Features

ƒ Automatically switches on/off diesel

engines equipped with remote start
input (NO or NC)
ƒ SmartStart provides power to PSk2
/ PSk3 systems for night time logic
operation such as early morning pump
starting
ƒ Battery charging from PSk2 / PSk3
Controller
ƒ Auxiliary output for switching other
devices (only usable with PSk2)

Technical Data Product Content Battery Requirements

ƒ Max. switching capability: 250 V AC / The SmartStart comes with two cables, ƒ NP7-12 or a similar sealed 12 V lead-
30 V DC, 2 A one cable to be used with the PSk2 acid battery
ƒ Enclosure class: IP54 product line and one cable to be used ƒ Recommended minimum capacity: 7
ƒ Nominal cross section for remote start with the PSk3 product line. Each cable Ah
cable 1.5 mm² is ready to use and has a length of ƒ Max. dimensions without connector:
ƒ Further information is available in the 2 m. The required battery must be 151 x 70 x 95 mm (5.94 x 2.56 x 3.74
PSk2 and PSk3 manual on partnerNET ordered separately. The battery must in)
meet the requirements on the right. ƒ Max height with connector: 100 mm
(3.94 in)
ƒ Connector: 4.8 mm (0.189 in) faston
tabs

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
Tel. +49 (0) 4193 8806 - 700, www.lorentz.de
v220426

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 Mounting options Order information

ƒ Wall or panel mount using 4 mounting Item number Description

holes, hole diameter 6 mm
ƒ You must allow a space above and 19-004285 SmartStart
below the SmartStart of 250 mm

Dimensions and weight

ƒ Packaging dimensions: L x W x H 245 x 285 x 305 mm (9.6 x 11.2 x 12 in)

ƒ Packed weight
(without battery): 2.4 kg (5.2 lbs)

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
Tel. +49 (0) 4193 8806 - 700, www.lorentz.de
v220426

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
 Surge Protector2
Device to Protect LORENTZ Pump Accessories from Voltage Spikes

ORDER INFORMATION
• Item no.: 19-005210 product name: Surge Protector2

FEATURES/COMPATIBILITY
• Reliable surge protection device for any switched, pulse or
analogue (4-20 mA) inputs sensors including:
o Well Probe Sensor 19-000000
o Water Sensor 19-000001
o Float Switch 19-000030
o Pressure Switch 19-000310
o Liquid Level (all types, e.g. 19-005040)
o Liquid Pressure Sensor (all types, e.g. 19-004460)
o Water Meter (all types, e.g. 19-002160)
o Sun Switch (19-000050)
• The device must be installed inside the PS2 or PSk2 controller.

TECHNICAL DATA
• Max. voltage: 30 V DC
• Max current 8/20µs: 500 A
• Enclosure class: IP20
• Ambient temperature: max. 80°C (176°F)
• Wire size: 2 x 1.5mm² (AWG 16)
• Meets the requirements for CE

DIMENSION/WEIGHT
• Packing dimensions: 56 x 26 x 120 mm
2.2 x 1.02 x 0.47 in
• Total weight 0.1 kg / 0.2 lbs

BERNT LORENTZ GmbH

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany
V191120

Tel +49 (0)4193 8806-700, www.lorentz.de

All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.