Te m p e r a t u r e P r o t e c t i o n D e v i c e s

October 2023

Temperature protection device

Chip NTC thermistor

Automotive grade:Corresponding to 125,150,175°C

NTCG series
NTCG 0603 JIS 0603 [EIA 0201]
NTCG 1005 JIS 1005 [EIA 0402]
NTCG 1608 JIS 1608 [EIA 0603]
NTCG 2012 JIS 2012 [EIA 0805]
 (2/19)

Temperature Protection Devices

REMINDERS FOR USING THESE PRODUCTS

Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.

REMINDERS

Please pay careful attention to the precautions and follow safe designing practices when using these products.
Incorrect usage may lead to destroyed NTC thermistors and damages or malfunctions with the devices used.

Please use them within the ranges of the ratings and performance provided in the catalog and delivery specifications upon confirming
the environments where they are to be used and installed.
Do not use them outside the operating temperature range.
Do not use them with the ratings or maximum permissible power levels exceeded.
Do not quickly apply 5mW or more of load with the constant-voltage power supply in the NTC thermistor as this may lead to staying in
thermal runaway mode or the red-shorting of chips.
Please be cautious of the applied voltage in thermistors as instruments may malfunction with the lowering of resistance due to self
heating.
With instruments that consumers can touch the thermistors with their hands, please carefully warn them not to touch the thermistors.
Store them in locations where the temperature is 10°C to +40°C and the relative humidity is 75% or below, avoid environments where
there are sudden changes in temperatures, direct sunlight, corrosive gas, grit, or dust, and keep them packed in a manner where no
loading stress is applied in order to avoid deterioration and damage. (please use them within six months.)
When sealing thermistors, please do so upon first considering the type, quantity, hardening conditions, and adhesiveness of the seal-
ing material and confirming its reliability.
Avoid powerful vibrations, impact (such as by dropping), pressure, etc. on thermistors that exceed the prescribed levels.
Do not use them for long periods of time in environments with a relative humidity of over 85%. (this excludes cases where countermea-
sures have been taken.)
Do not use them in the following environments. (this excludes cases where countermeasures have been taken.)
• Corrosive gases (Cl2, NH3, SOx, NOx, etc.)
Environments with highly conductive substances (electrolytes, water, saltwater, etc.)
Environments with acid, alkali, or organic solvents
Dusty areas
Please observe the following precautions when attaching them to substrates as failure to do so may result in destruction or malfunction.
Do not let the substrates get warped or twisted at any time during the soldering.
The landing size must be even on both the left and right sides.
Do not use items that have been dropped or detached.
Do not allow the adherence of more solder than needed.
Reflow mounting is recommended with NTC thermistors, and not flow (dip) mounting.
Attaching or making corrections with a soldering iron is not recommended as it can lead to troubles such as significant distorting due to
thermal shock or cracking. If a soldering iron must be used, it should be 30W or below with the temperature of the tip at 350°C or
below, and at a maximum of 5 seconds of soldering time. Also, do not let the tip of the soldering iron come in direct contact with the
chips.
Please use a substance such as resin that does not generate hydrogen (H2) when forming insulation film over chips.
Please contact our sales offices when considering the use of the products listed on this catalog for applications, whose performance
and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage
to society, person or property ('specific uses' such as automobiles, airplanes,medical instruments, nuclear devices, etc.) as well as
when considering the use for applications that exceed the range and conditions of this catalog.

Please note that we are not responsible for any damages or losses incurred resulting from the use of these products that exceeds the range
and conditions of this catalog or specific uses.
Please take appropriate measures such as acquiring protective circuits and devices that meet the uses, applications, and conditions of the
instruments and keeping backup circuits.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (3/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Overview of the NTCG series

CHARACTERISTICS OF NTC THERMISTORS FEATURES OF NTCG SERIES
NTC(Negative Temperature Coefficient) thermistors are 125°C compatible lineup
manufactured from sintered metal oxides. Each thermistor 150°C compatible lineup
consists of a combination of two to four of the following materials: 175°C compatible lineup (guaranteed separately)
manganese, nickel, cobalt and copper. NTC thermistors are AEC-Q200 compliant.
semiconductor resistors that exhibit decreasing resistance
characteristics with increasing temperature. TDK thermistors have
low thermal time constants which result in extremely high rates of
resistance change to accurately track the temperature.

Fig.1 R-T Curve : 10kohm@25°C Fig.2 Internal structure of the multilayer chip Thermistors

1000

100
Resistance (kΩ)

10

0.1
–40 0 50 100 150 200
Temperature (°C) No. Name
Semiconductor ceramics
Internal electrode (Pd)
Ag
Terminal electrode Ni
Sn

RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (4/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Overview of the NTCG series

PART NUMBER CONSTRUCTION
NTC G 3E H 101 T
shapes and Nominal Nominal
B constant
Series Structural dimensions B resistance resistance Packaging
tolerance TDK internal code
name classification Code constant tolerance style
(%)
(mm) () (%)
NTC Multilayer 125°C vehicle response
06 0603 F ±1 300 30 D ±0.5 T Taping
thermistor internal B constant: 25/85°C
electroded 125°C vehicle response
G 10 1005 H ±3 101 100 F ±1 B Bulk
chip type B constant: 25/50°C
NTC thermistor 1000 150°C vehicle response
(Pb free type) 16 1608 102 H ±3
(1k) B constant: 25/85°C
10000 150°C vehicle response
20 2012 103 J ±5
(10k) B constant: 25/50°C
175°C vehicle response
B constant: 25/85°C
175°C vehicle response
B constant: 25/50°C

B constant
B constant(K)
2000 to 2050 3A 3000 to 3050 4A 4000 to 4050
2051 to 2100 3B 3051 to 3100 4B 4051 to 4100
2101 to 2150 3C 3101 to 3150 4C 4101 to 4150
2201 to 2250 3E 3201 to 3250 4E 4201 to 4250
2251 to 2300 3F 3251 to 3300 4F 4251 to 4300
2401 to 2450 3J 3401 to 3450 4J 4401 to 4450
2451 to 2500 3K 3451 to 3500 4K 4451 to 4500
2501 to 2550 3L 3501 to 3550 4L 4501 to 4550
2601 to 2650 3N 3601 to 3650 4N 4601 to 4650
2701 to 2750 3Q 3701 to 3750 4Q 4701 to 4750
2801 to 2850 3S 3801 to 3850 4S 4801 to 4850

The B constant indicates the magnitude of a change in a zero-load resistance value to a temperature, and is obtained based on arbitrary two temperatures
in resistance-to-temperature characteristics.

B constant calculation formula

InR1–InR2
B= B: B constant (K)
(1/T1)–(1/T2)
T1:Arbitrary temperature (K)
T2:Arbitrary temperature different from T1 (K)
R1:Zero-load resistance value at temperature T1()
R2:Zero-load resistance value at temperature T2()
Each temperature is measured in absolute temperature. 0°C=273.15K

Dimensions in mm
Shape symbol (JIS) L W T B
0603 0.60±0.03 0.30±0.03 0.30±0.03 0.1min
1005 1.00±0.05 0.50±0.05 0.50±0.05 0.1min
1608 1.60±0.10 0.80±0.10 0.80±0.10 0.2min
2012 2.00±0.20 1.25±0.20 0.70±0.20 0.2min

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (5/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Overview of the NTCG series

RATINGS 125°C RESPONSE COUNTERPARTS
mm 0603 1005 1608 2012
°C  mW 100 100 100 200
°C  mW/°C | mW/K 1 1 1 2

RATINGS 150°C RESPONSE COUNTERPARTS

mm 1005 1608 2012
°C  mW 125 125 250
°C  mW/°C | mW/K 1 1 2

RATINGS 175°C RESPONSE COUNTERPARTS

mm 1005 1608
°C  mW 150 150
°C  mW/°C | mW/K 1 1
 Maximum rated power: Maximum power: at rated temperature (25°C), maximum power that can be applied continuously
 Dissipation factors: powered that it is equivalent that be increased in self-heating by load power thermistor at 1°C temperature

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (6/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series 0603 type

SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN
0.6±0.03

0.25 to 0.35
0.3±0.03

0.2 to 0.3 0.25 to 0.35 0.2 to 0.3

0.1 min.
0.3±0.03

Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm

125°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 125°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance operating
() (K) (K) (K) (K) current
[25°C]
(mA)
NTCG063JF103FTDS 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG064EF104FTDSX 100,000 ±1% 4250 4293 4308 4327 ±1% 0.10

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (7/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series 1005 type

SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN
1±0.05

0.4 to 0.6
0.5±0.05

0.35 to 0.45 0.3 to 0.5 0.35 to 0.45

0.1 min.
0.5±0.05

Electrode material
Internal:Pd
External:Ag/Ni/Sn

Dimensions in mm

125°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 125°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG103JF103JTDS 10,000 ±5% 3380 3422 3435 3453 ±1% 0.31
NTCG103JF103HTDS 10,000 ±3% 3380 3422 3435 3453 ±1% 0.31
NTCG103JF103FTDS 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG103JX103DTDS 10,000 ±0.5% 3380 3422 3435 3453 ±0.7% 0.31
NTCG104LH223JTDS 22,000 ±5% 4485 4533 4550 4573 ±3% 0.21
NTCG104LH473JTDS 47,000 ±5% 4485 4533 4550 4573 ±3% 0.14
NTCG104BF473JTDSX 47,000 ±5% 4050 4098 4114 4137 ±1% 0.14
NTCG104BF473HTDSX 47,000 ±3% 4050 4098 4114 4137 ±1% 0.14
NTCG104BF473FTDSX 47,000 ±1% 4050 4098 4114 4137 ±1% 0.14
NTCG104BF683FTDSX 68,000 ±1% 4085 4134 4150 4172 ±1% 0.12
NTCG104LH104JTDS 100,000 ±5% 4485 4533 4550 4573 ±3% 0.10
NTCG104EF104HTDSX 100,000 ±3% 4250 4293 4308 4327 ±1% 0.10
NTCG104EF104FTDSX 100,000 ±1% 4250 4293 4308 4327 ±1% 0.10
NTCG104ED104DTDSX 100,000 ±0.5% 4250 4293 4308 4327 ±0.5% 0.10
NTCG104LH154JTDS 150,000 ±5% 4485 4533 4550 4573 ±3% 0.05

150°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 150°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG103JF103JT1S 10,000 ±5% 3380 3422 3435 3453 ±1% 0.31
NTCG103JF103HT1S 10,000 ±3% 3380 3422 3435 3453 ±1% 0.31
NTCG103JF103FT1S 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG103JX103DT1S 10,000 ±0.5% 3380 3422 3435 3453 ±0.7% 0.31
NTCG104LH473JT1S 47,000 ±5% 4485 4533 4550 4573 ±3% 0.14
NTCG104BF473JT1SX 47,000 ±5% 4050 4098 4114 4137 ±1% 0.14
NTCG104BF473HT1SX 47,000 ±3% 4050 4098 4114 4137 ±1% 0.14
NTCG104BF473FT1SX 47,000 ±1% 4050 4098 4114 4137 ±1% 0.14
NTCG104LH104JT1S 100,000 ±5% 4485 4533 4550 4573 ±3% 0.10
NTCG104EF104HT1SX 100,000 ±3% 4250 4293 4308 4327 ±1% 0.10
NTCG104EF104FT1SX 100,000 ±1% 4250 4293 4308 4327 ±1% 0.10
NTCG104ED104DT1SX 100,000 ±0.5% 4250 4293 4308 4327 ±0.5% 0.10

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (8/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series 1005 type

SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN
1±0.05

0.4 to 0.6
0.5±0.05

0.35 to 0.45 0.3 to 0.5 0.35 to 0.45

0.1 min.
0.5±0.05

Electrode material
Internal:Pd
External:Ag/Ni/Sn

Dimensions in mm

175°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 175°C)

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG103JF103FT1H 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG104KF104FT1H 100,000 ±1% 4419 4468 4485 4509 ±1% 0.10

 Solder joint is not guaranteed. It is guaranteed as a single part.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (9/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series 1608 type

SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN
1.6±0.1

0.6 to 0.8
0.8±0.1

0.6 to 0.8 0.6 to 0.8 0.6 to 0.8

0.2 min.
0.8±0.1

Electrode material
Internal:Pd
External:Ag/Ni/Sn Dimensions in mm

125°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 125°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG163EH101HTDS 100 ±3% 3244 3249 3250 3251 ±3% 3.16
NTCG164BH222JTDS 2,200 ±5% 4096 4100 4100 4100 ±3% 0.67
NTCG164BH472JTDS 4,700 ±5% 4067 4092 4100 4110 ±3% 0.46
NTCG163JF103HTDS 10,000 ±3% 3380 3422 3435 3453 ±1% 0.31
NTCG163JF103FTDS 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG163JX103DTDS 10,000 ±0.5% 3380 3422 3435 3453 ±0.7% 0.31
NTCG164BH103JTDS 10,000 ±5% 4067 4092 4100 4110 ±3% 0.31
NTCG164LH223JTDS 22,000 ±5% 4485 4533 4550 4573 ±3% 0.21
NTCG164LH473JTDS 47,000 ±5% 4485 4533 4550 4573 ±3% 0.14
NTCG164LH473HTDS 47,000 ±3% 4485 4533 4550 4573 ±3% 0.14
NTCG164BF473FTDSX 47,000 ±1% 4050 4098 4114 4137 ±3% 0.14
NTCG164LH104JTDS 100,000 ±5% 4485 4533 4550 4573 ±3% 0.10
NTCG164LH104HTDS 100,000 ±3% 4485 4533 4550 4573 ±3% 0.10
NTCG164KF104FTDS 100,000 ±1% 4419 4468 4485 4509 ±1% 0.10
NTCG164LH154JTDS 150,000 ±5% 4485 4533 4550 4573 ±3% 0.08
NTCG164QF474JTDS 470,000 ±5% 4632 4698 4720 4749 ±1% 0.04
NTCG164QF474HTDS 470,000 ±3% 4632 4698 4720 4749 ±1% 0.04

150°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 150°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG163JF103HT1S 10,000 ±3% 3380 3422 3435 3453 ±1% 0.31
NTCG163JF103FT1S 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG163JX103DT1S 10,000 ±0.5% 3380 3422 3435 3453 ±0.7% 0.31
NTCG164LH473JT1S 47,000 ±5% 4485 4533 4550 4573 ±3% 0.14
NTCG164LH473HT1S 47,000 ±3% 4485 4533 4550 4573 ±3% 0.14
NTCG164BF473FT1SX 47,000 ±1% 4050 4098 4114 4137 ±3% 0.14
NTCG164LH104JT1S 100,000 ±5% 4485 4533 4550 4573 ±3% 0.10
NTCG164LH104HT1S 100,000 ±3% 4485 4533 4550 4573 ±3% 0.10
NTCG164KF104FT1S 100,000 ±1% 4419 4468 4485 4509 ±1% 0.10
NTCG164QF474JT1S 470,000 ±5% 4632 4698 4720 4749 ±1% 0.04
NTCG164QF474HT1S 470,000 ±3% 4632 4698 4720 4749 ±1% 0.04

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (10/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series 1608 type

SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN
1.6±0.1

0.6 to 0.8
0.8±0.1

0.6 to 0.8 0.6 to 0.8 0.6 to 0.8

0.2 min.
0.8±0.1

Electrode material
Internal:Pd
External:Ag/Ni/Sn Dimensions in mm

175°C°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 175°C)

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG163JF103FT1H 10,000 ±1% 3380 3422 3435 3453 ±1% 0.31
NTCG164KF104FT1H 100,000 ±1% 4419 4468 4485 4509 ±1% 0.10

 Solder joint is not guaranteed. It is guaranteed as a single part.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (11/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series 2012 type

SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN
2±0.2

0.9 to 1.2
1.25±0.2

0.7 to 0.9 0.9 to 1.2 0.7 to 0.9

0.2 min.
0.7±0.2

Electrode material
Internal:Pd
Dimensions in mm
External:Ag/Ni/Sn

125°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 125°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG203NH103JTDS 10,000 ±5% 3590 3635 3650 3670 ±3% 0.44
NTCG204AH473JTDS 47,000 ±5% 3930 3982 4000 4032 ±3% 0.20
NTCG204CH104JTDS 100,000 ±5% 4085 4134 4150 4172 ±3% 0.14

150°C RESPONSE COUNTERPARTSOPERATING TEMPERATURE RANGE –40 to 150°C

Part No. Resistance Resistance B constant B constant B constant B constant B constant Permissible operating current
[25°C] tolerance [25/50°C] [25/75°C] [25/85°C] [25/100°C] tolerance [25°C]
() (K) (K) (K) (K) (mA)
NTCG203NH103JT1S 10,000 ±5% 3590 3635 3650 3670 ±3% 0.44
NTCG204AH473JT1S 47,000 ±5% 3930 3982 4000 4032 ±3% 0.20
NTCG204CH104JT1S 100,000 ±5% 4085 4134 4150 4172 ±3% 0.14

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (12/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

NTCG series RT table

R-T TABLE ACQUISITION PROCEDURE
1. Access the top page of the TDK chip NTC thermistor (protective device)
https://product.tdk.com/info/en/products/protection/temperature/chip-ntc-thermistor/index.html

2. Click [Search by Part No.]

https://product.tdk.com/en/search/protection/temperature/chip-ntc-thermistor/part_no/

3. Enter the product name you want in the RT table in the box and click the Search button.
( Example: NTCG103JF103FT1 )
Wildcard and Multiple Part number.
NTCG103JF103FT1
Search Question mark (?) and asterisk (*) can be used as wildcard characters.
The question mark (?) matches any single character, and the asterisk (*)
matches any sequence of characters.
Enable the real time search Enter only one part number per line. Up to 50 part numbers can be
searched simultaneously.
A part number search is normally performed using a prefix search. If you
wish to use a suffix search, enter an exclamation mark (!) at the end of
the Part No.

4. Click the displayed product name.

( Example: NTCG103JF103FT1 )
Catalog /
Distributor
Check Data Images Part No. Brand Apps. Feature
Inventory
Sheet

125°C
Buy Now TDK
NTCG103JF103FT1 UL

New 150°C
Buy Now TDK
NTCG103JF103FT1S AEC-Q200

5. Individual pages are displayed and click the RT table in the "Document" on the right side bar.

Documents
Catalog
RoHS Certificate
SVHC/REACH Certificate
Selection Guide
RT Sheet

6. You can download the csv file in the 1°C step of the RT table for the product.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (13/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Attention in the board design

BOARD DESIGN (2) When peak levels panning-at soldering is excessive, by solder
contraction stress, mechanical-thermal stress causes a Yasuku
When attached to NTC substrate thermistor, amount of silver used
chip crack.
(fillet size) has direct impact on NTC thermistor after mounting.
In addition, when the peak level is underestimated, terminal
Thus, sufficient consideration is necessary.
electrode fixed strength is insufficient. This causes chip dropouts
and may affect circuit reliability.
Set of land dimensions
Representative example of the panning of peak levels is shown in
(1) As the stress rises in the NTC thermistor owing to the increase
the following.
in silver, breakage and cracks will occur. Cause including crack, as
caution on board land design, configure the shape and dimensions
Recommended silver dose
so that the amount of silver is appropriate.
If you installed 2 or more parts in the Common Land, separated by Solder stress is increased,
a solder resist and special land of each component. and it is easy for a crack to
form.
Dimensions shape

C
Fixed strength is weak, and
there is connection a
B A problem and risk of loss.

Symbol Case and suggested protocol want to avoid

Shape symbol
A B C
Improvement example
0603 0.25 to 0.35 0.20 to 0.30 0.25 to 0.35 Example Cases to avoid
(land division)
1005 0.30 to 0.50 0.35 to 0.45 0.40 to 0.60
1608 0.60 to 0.80 0.60 to 0.80 0.60 to 0.80 Leads Leads

2012 0.90 to 1.20 0.70 to 0.90 0.90 to 1.20 Chip Solder Solder resist
Lead wire and land
of part discrete
doubles up

PCB

Chassis
Solder Solder resist
(ground solder)
Arrangements in
the vicinity

L1 L2 L2>L1

Land

Arrangements of
chip component's
companion Excess solder Solder resist

Land
Missing solder

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (14/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Attention in the board design

Arrangements of components (2) In payment near by board, depending on mount position of
(1) I was based on camber of substrate and suggested protocol of NTC PTC, as mechanical stress varies, please refer to the
NTC thermistor arrangement, as stress does not join to the utmost following diagram.
is shown in following.

Substrate for flexural stress Substrate for flexural stress E D

Adverse events Good example
Perforation C
Perforation or slit Perforation or slit

Direction of B
A
surface solder
Slit
Solder the mountain fold as a Solder the mountain fold as a
top. bottom.
Perforation or slit Perforation or slit The order of A > B = C > D > E eases the stress.

Chip
arrangements
(direction)

Mounted vertically to the Mounted horizontally to the

perforation and slit. perforation and slit.
L1 L2

Distance from
perforation and
slit portion (L1<L2) (L1<L2)

Close location is It is an advantage so distant

disadvantageous of location away places the
perforation and slit. perforation and slit.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (15/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Attention on the mounting

APPLICATION TO BOARD Reflow temperature profile

Mounting head pressure Preheating Soldering Natural

cooling
Under suction nozzle if dead point too, during implementation, Peak
excessive force joins of NTC thermistor low, as cause causes of T4
crack, please use with reference to something about following.

T: Temperature
1) Being set to top surface of substrate so that under suction nozzle T3 T3

as for dead center, substrate does not bend back, and adjust,
please. T2 t3
2) Nozzle pressure at implementation is 1N 3N in static load, T1
please.
3) Substrate fixes up back surface of substrate with support pin in t1 t2

impact of suction nozzle to wely deflection to the utmost, and

substrate hold deflection, please. t: Time
A representative example is shown in the following.

Specification
Cases to avoid Recommended case
Item for eutectic For lead-free
Crack mixture solder solder
Preheating temperature 160 to 180°C 150 to 180°C
Single-sided Solder melting temperature 200°C 230°C
mounting Maximum temperature 240°C max 260°C max.
Preheating time 100s max. 120s max.
Support pin
Time to reach higher than the
30s max. 40s max.
solder melting temperature
number of possible reflow cycles 2 max. 2 max.
Double-sided
mounting SOLDERING IRON
Solder peeling Crack Support pin (1) The tip temperature and also by (1) types of soldering irons, the
size of the substrate, and the geometry of the land pattern.Being
Mechanical shock that, if positioning your nail to wear, ragged edge earlier, but when as there is possibility that crack occurs in the heat
of positionings, participates in NTC thermistor are locally, and NTC anderson impaction, point soldering iron temperature is high, please
thermistor, as there is possibility of crack generated, cut the closed do solder work within the following conditions.
positioning, and maintenance and inspection, and, exchange of Temperature Pallet point
Wattage Soldering time
of iron tips shape Frequency
manage dimensions and position nail periodically, please. W (Second)
°C mm
Within each
SOLDERING 20max. ø3.0max. 5 max.
terminal once
(Within total of
Significant impact is possible on the performance of NTC thermistor, twice)
flux checks something about follow, please use.
(1) Flux uses one with 0.1wt % (Cl conversion) or less halide (2) Direct iron tip is in contact with the (2) NTC thermistor body, and
substance contains amounts, please. In addition, do not do this with the strain owing to thermal shock in particular grows even if a crack
strongly acidic objects. is generated. Therefore, please do not touch it directly to the terminal
(2) Flux during is soldered (2) NTC substrate thermistor is applied electrodes.
the smalleset amount necessary, please.
(3) If Used soluble flux, perform thorough wash particularly, please.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (16/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Attention after mounting

CLEANING (2) During each substrate operational check, push pressure with
contact failure of check pin of boards checkers of check pin may be
(1) If cleaning liquid is inappropriate, residues and other foreign
toned up to be prevented. As substrate is bent under loading, NTC
body of fluxes builds up on NTC PTC surface, and can degrade the
thermistor is broken owing to stress. There is also the possibility that
performance of NTC thermistor (particularly the insulation
solder on the terminal electrode will peel off. Follow the diagram for
resistance).
reference, and check that the substrate bends, please.
(2) Wash conditions may compromise performance of NTC
thermistor if they are improper (wash due, wash excess).
Item Cases to avoid Recommended case
2-1) For wash due Peeling Support pin

(a)By substance of a system in flux residue halide, metal including Substrate sags
terminal electrodes may experience corrosion. Check pin Check pin
(b)Substance of a system in flux residue halide builds up on NTC
PTC surface, and reduces the insulation resistance.
(c) Soluble flux makes comparisons of colophony series flux, and
SINGLE-PART COMPONENT HANDLING
there is event with trends of significant (1) and(2).
(1) To drop impact, as there is possibility that breakage and crack is
2-2) For excess wash entered, do not NTC thermistor that(1) NTC thermistor falls.
(1) Owing to lavage, NTC PTC surface deteriorates, and reduces
performance of NTC thermistor.
(2) In ultrasonography, when output is passed, substrate resonates
Crack
size, and crack occurs in body and sprang of NTC thermistor in
vibration of substrate. Since this may reduce the strength of the
terminal electrode, please note the following conditions.
Floor
Ultrasound output 20W/liter or less
Ultrasound frequency 40kHz or less (2) At stacking storage after implementation and treatment of
Cleaning time 5minutes or less substrate, corner of boards is regarded as NTC thermistor. Please
be careful, as there is the possibility that breakage and cracks will
2-3) Concentration including halogen that when cleaning liquid to occur on impact.
pollution, when you released is higher, and may cause similar of
results into wash due. Crack

SUBSTRATE HANDLING AFTER COMPONENT

MOUNTING
(1) When substrate is divided, a flexible so that show in following
diagram to substrate, and is given by stress including twist, as there
is possibility that crack occurs of NTC thermistor, please check that
stress is within acceptable limits.

Bends Twist

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (17/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Packaging style
REEL DIMENSIONS PACKAGE QUANTITY, PRODUCT WEIGHT
Package quantity Individual weight
2.0±0.5 Type
(pieces/reel) (mg)
NTCG06 15,000 0.3
NTCG10 10,000 1.3
NTCG16 4,000 5.0
NTCG20 2,000 7.2
ø60min.

0.8

ø13±0.2 9.0max.
ø21±0.8 14.0max.
ø180±2.0

Dimensions in mm

TAPE DIMENSIONS
1.75±0.1

1.5 +0.1 2.0±0.05 4.0±0.1

0
3.5±0.05

8.0±0.3
B

A P1 T

Dimensions in mm
Type A B P1 T
0603 0.38±0.05 0.68±0.05 2±0.05 0.45max.
1005 0.65+0.05/-0.1 1.15+0.05/-0.1 2±0.05 0.65max.
1608 1.1±0.2 1.9±0.2 4.0±0.1 1.1max.
2012 1.6±0.2 2.3±0.2 4.0±0.1 1.1max.

160min. Taping 200min.

Drawing direction 200min.

Dimensions in mm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (18/19)

Temperature Protection Devices

Product compatible with RoHS directive
NTC Thermistors Compatible with lead-free solders
AEC-Q200
Automotive grade:Corresponding to 125,150,175°C

Description and definition of terms

INITIAL RESISTANCE
Thermistor resistance is a function of absolute temperature as indicated by the following relationship:
1 1 ............................................................ (1)
R=R0 • expB
T
–
T0 ( )
Here R0, R(k) are the respective resistance values when the surrounding temperature is T0, T(K). B is the thermistor constant(B con-
stant below).

B CONSTANT
The B constant is found from the following equation:
2.3026(logR–logR0)
B= ....................................................... (2)
1 – 1
T T0
This B characteristic is indicated by the slope of the linear plot of log R-1/T inverse absolute temperature.
The B constant value is generally in the vicinity of 2500K to 5000K. B constant values of 3000K to 4000K are frequently used for measure-
ments.

Resistance-temperature characteristics (Fig.1)

Temperature(˚C)
450 400 350 300 250 200 150 100
100

20kΩ/200˚C
10
Resistance (kΩ)

3.3kΩ/100˚C
1

1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3

1 ×10 3 (K)
T

TEMPERATURE COEFFICIENT
The relationship between temperature coefficient  and B becomes:
1 dR B
= • = – 2 100(%/°C) ............................................. (3)
R dT T
The negative sign of the temperature coefficient indicates that the temperature coefficient decreases as both thermistor resistance and
temperature rise. If B is taken as 3400K, the temperature coefficient found at 20°C (293.15K) becomes –4%/°C.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
 (19/19)

Temperature Protection Devices

HEAT DISSIPATION COEFFICIENT

Temperature rises due to thermal energy formed as electrical current flows through the thermistor. The thermistor temperature T0 is then
related to the surrounding temperature Ta and the electrical input W:
W=k(T0–Ta)=V•I(mW) ............................................................ (4)
W
k= (mW/°C) .............................................................. (5)
T0 –Ta
This k value is the heat dissipation coefficient, which represents the additional electrical power (mW/°C) needed to raise the thermistor
temperature by 1°C. This heat dissipation coefficient varies with changes in the measurement and environmental conditions. When a
thermistor is used for temperature measurement, it is naturally important to lower the applied electrical current as much as possible in
order to reduce measurement error resulting from self heating.

VOLTAGE - CURRENT CHARACTERISTIC

The voltage - current characteristic indicates the drop in voltage as electrical current through the thermistor is gradually increased.

Voltage-current characteristics (Fig.2)

100

5
10 4
3
2
Voltage (V)

Ta=25˚C (in still air)

No.1 5kΩ
2 10kΩ
3 20kΩ
4 50kΩ
5 100kΩ
0.1 1 10 100
Current (mA)

HEATING TIME CONSTANT

The time period required to heat up a thermistor from a certain temperature T0 over a target temperature rise is called the heating time
constant. Various types of heating time constants are indicated by the symbols shown in Table 1 as determined by the percent change
from T0 toward the target temperature. The standard change is typically taken to be 63.2%.

Thermal time constants (Fig.3)

70

T0
60
Heating Table 1 Heating time constant and temperature change ratio
(T0 –Ta)
×0.632

50
Code Rate of change (%) for T0 -Ta
Th  63.2
Temperature (˚C)

40 2 86.5
Tc 3 95.0
(T0 –Ta)

4 98.2
×0.368

30
5 99.4
20
Room temperature Ta
6 99.8
Cooling
7 99.9
10

0
τ 2τ 3τ 4τ 5τ 6τ 7τ

PERMISSIBLE OPERATING CURRENT

This is the maximum load current limit below 1°C temperature rise due to thermistor self-heating.
It's possible to express it in the following system.

Maximum allowed current [mA] Heat dissipation constant[mW/°C] ÷ Resistance[k ]

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.

20231010 / tpd_automotive_ntc-thermistor_ntcg_en.fm
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TDK:
NTCG163JF103FT1S NTCG104LH223JTDS NTCG164LH223JTDS NTCG164KF104FT1S NTCG103JX103DTDS
NTCG164LH154JTDS NTCG104EF104FT1SX NTCG103JF103FT1S NTCG104LH154JTDS NTCG163JX103DT1S
NTCG104LH473JTDS NTCG164BH472JTDS NTCG104EF104FTDSX NTCG163JX103DTDS NTCG164BH222JTDS
NTCG164KF104FTDS NTCG164LH473JTDS NTCG163JF103FTDS NTCG104LH104JTDS NTCG164BH103JTDS
NTCG103JF103HTDS NTCG164LH104JTDS NTCG163JF103HTDS NTCG103JF103FTDS NTCG103JF103JTDS
NTCG104BF683FTDSX NTCG163JH103HTDS NTCG164LH473HTDS NTCG203NH103JTDS
NTCG163EH101HTDS NTCG063JF103FTDS NTCG164EF104FT1X NTCG164LH104HT1S NTCG104BF473FT1SX
NTCG064EF104FTDSX NTCG103JF103HT1S NTCG103JF103JT1S NTCG103JX103DT1S NTCG104BF473FTDSX
NTCG104BF473HT1SX NTCG203NH103JT1S NTCG204AH473JT1S NTCG204AH473JTDS NTCG204CH104JT1S
NTCG204CH104JTDS NTCG164LH473HT1S NTCG164LH473JT1S NTCG164QF474HT1S NTCG164QF474HTDS
NTCG164QF474JT1S NTCG164QF474JTDS NTCG104LH473JT1S NTCG163JF103HT1S NTCG164BF473FT1SX
NTCG164BF473FTDSX NTCG164LH104HTDS NTCG164LH104JT1S NTCG104BF473HTDSX
NTCG104BF473JT1SX NTCG104BF473JTDSX NTCG104ED104DTDSX NTCG104EF104HTDSX
NTCG104LH104JT1S NTCG104EF104HT1SX NTCG104ED104DT1SX