MILL TEST CERTIFICATE Jindal Stainless Limited.

(INSPECTION CERTIFICATE) IS 6911

Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1

CM/L-5200020363
a6c922jruMDE5MDA4ODM=
CUSTOMER :PARINOX PVT LTD CERTIFICATE NO. :JSL-JRD/QA/2024-25/DOM/01900883
CITY :Mumbai DATE :13.07.2024
P.O.NO. :Auction-2690-Lot-315 PO DATE:09.07.2024 VEHICLE NO. :MH46CL1955
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0529067716
SHIPMENT/DELIVERY NO. :6300159120 NET WT(MT) :8.635

Material Description/Product Grade / Type Material Specifications Process-Route

STAINLESS STEEL 304/1.4301 EN 10088-2:14, EN 10028-7:16, ASTM A240/A240M-24, ASME EF-AOD-LRF-CCS
SA-240/SA-240M 2023 SEC. II, PART A, IS 6911:2017 AMD. 3

PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 100156639 100156639 349583 5.580 1 12401750 75.000 1,500.00 6,100.00 N1 Mill Edge PRIME
2 100157022B 100157022 349998 0.635 1 40402C10 17.000 1,500.00 3,000.00 N1 Trim Edge PRIME
3 100157340 100157340 350127 1.855 1 40402C08 25.000 1,500.00 6,000.00 N1 Mill Edge PRIME
4 500182045 0001043138 350082 0.565 1 40205C04 10.500 1,500.00 4,470.00 N1 Trim Edge PRIME

CHEMICAL ANALYSIS (LADLE)

HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
12401750 0.055 1.00 0.005 0.039 0.29 8.04 18.19 0.046 - - - - -
40402C10 0.048 0.92 0.002 0.032 0.36 8.05 18.24 0.053 - - - - -
40402C08 0.042 0.96 0.002 0.033 0.31 8.01 18.17 0.052 - - - - -
40205C04 0.044 0.96 0.003 0.028 0.32 8.02 18.20 0.057 - - - - -

MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE

Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm

1 326 371 627 57 - 52 82 / 83 -

2 308 352 654 56 - 51 82 / 83 -

3 327 368 633 58 - 53 80 / 81 -

4 327 372 633 58 - 55 79 / 80 -

ADDITIONAL INFORMATION
1)- MATERIAL HAS BEEN SOLUTION ANNEALED AT MIN 1040º C & QUENCHED IN WATER.
2)- ABOVE MATERIAL ALSO CONFIRM TO IS 6911:2017 AMD. 3 GRADE 304.
3)- MATERIALS CONFIRM TO THE REQUIREMENTS AS PER ASTM A480/A480M-24 & ASME SA-480/SA-480M SEC. II PART A-2023.

* THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD 3 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".

Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 45001 : 2018
Odisha - 755026, India. by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. ISO 50001: 2018
TEL :+91-9078899031, IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: [email protected] Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021

Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1